Condition: used, Year of construction: 1992, sheet width 3000 mm plate thickness 06 mm distance between columns 3200 mm throat 250 mm stroke 180 mm table width 520 mm table height over floor 1015 mm Number of downholders 8 St. Hnodpfxot Tqnvo Andjr cutting angle 0,5 - 2,5 ° total power requirement 12 kW weight of the machine ca. 10 t dimensions of the machine ca. 3,8 x 2,65 x 2,45 m Machine was overhauled and modernized with light barrier at table. Machine has an automatic back stop with programmable DRO and a sheet lifting device.

Condition: used, Year of construction: 2001, sheet width 1650 mm Hnedezafi Nepfx Andor plate thickness 0,5- 3 mm number of rolls 21 straightening feed 0- 60 m/min straightening roll diameter 50 mm adjustment 30 mm weight of the machine ca. 24,5 t dimensions of the machine ca. 4,5x 2 x 2,8 m voltage 400 V passage width 1720 mm number of support rolls 18 main drive motor 45 kW run-in height 1250 mm 6 HI High-performance straightening machine with 21 rolls for fine straightening work of steel or non-ferrous metals. Machine has 23 intermediate rolls and 18 support points. Working rolls are adjustable with DRO in 0,01 mm. Main Gearbox was renewed in 2021.

Condition: used, Year of construction: 1983, sheet width 2540 mm Hodpfxow H Dkao Andjnr plate thickness 2 mm distance between columns 2600 mm min. cut-off length 5 x s mm adjustment of lower beam 80 mm adjustment of upper beam 80 mm daylight opening 350 mm total power requirement 4 kW dimensions 4 x 1 x 1,5 m With accessories.

Condition: used, Year of construction: 2000, plate thickness 3 mm blade length 225 x 225 mm cutting angle 90 ° throat 110 mm strokes per minute 45 total power requirement 2,5 kW weight of the machine ca. 0,9 t Hnjdpjxyacpofx Andor dimensions of the machine ca. 1 x 1 x 1,2 m

Condition: used, Year of construction: 1992, pressure 0200 t chamfer lenght 3100 mm distance between columns 3000 mm stroke length max. 400 mm feed down 160 mm/sec feed up 140 mm/sec feed under pressure 10 mm/sec Hodeyy A D Sopfx Andenr oil volume 500 l dayligth 600 mm Control ModEva 12 S Cybelec throat 250 mm total power requirement 28 kW weight of the machine ca. 17 t dimensions of the machine ca. 4,5 x 2,7 x 3,4 m Electric hydraulic machine with Cybelec ModEva 12S control, some accessories, foot and two hand switch pane and safety arrangements. Machine has been verhauled and modernized in 2020 !! Machine is floor standing.

Condition: used, Year of construction: 1998, machine/vehicle number: H981224, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 170 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table width: 180 mm, table length: 4,230 mm, table height: 960 mm, throat depth: 410 mm, clearance between the columns: 3,760 mm, oil tank capacity: 150 l, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, overall weight: 13 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine is still operational and can be inspected at the factory in Northern Germany. Working length: 4100 mm Distance between uprights: 3650 mm Pressing force: 170 tons Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear stop Overhang: 300 mm Stroke: 200 mm Hnedpfx Anozuv Evedjr Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shears -Cutting insert length: 200 mm -Round steel: up to approx. 20 mm -Rectangular profile: up to approx. 19x19 mm Hnjdpfxjibitme Ander -Lever arm: with rack and pinion transmission -Overall dimensions: 455/170/H1540 mm -Transport dimensions: 1230/170/H440 mm -Weight: 49 kg

Condition: ready for operation (used), functionality: fully functional, Guillotine Shear – Mechanical Model: HSM-F 15/3.0 Machine No.: 11644-0995 Year of manufacture: 1995 Condition: Good, operational condition TECHNICAL DATA Cutting capacity: 1,550 x 3.0 mm Cutting angle: 2° Number of cuts per minute: 35 Hnjdsydk Acopfx Ander Motor power: 3 kW with brake, 380 V/50 Hz Manual backgauge: 0-500 mm Weight: 1,255 kg EQUIPMENT/ACCESSORIES  Angle stop with ruler  Double-edged blades  Foot switch  Documentation

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, Darley hydraulic shear Model : GS 3100 x 10 mm. Year : 1997 Kapacity : 3100 x 10 mm. Power back gauge with digital and presetting Blade angle setting Blade gap setting Hjdozuvx Aopfx Andonr Front arms Extra set of blades Light guard Machine leveling foot

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Durma CNC pressbrake Model CNC HAP 30160 Year : 2005 Hodpjzuvxpjfx Andjnr Capacity : 3050 mm. x 160 ton Control : Cybelec 3 axis (Y1 - Y2 - X) Last service and security control : July 2026 Equipment.... -Lots of bending tools -Crowning -Front arms sideway adjustable -Foot pedal

Condition: used, Year of construction: 1991, Max. Cutting length: 3100 mm Max. Cutting thickness: 10 mm steel Hjdpshlnv Usfx Andenr Motor rear stop up to 1000 mm with digital display Side stops and table extensions cutting length limitation Cutting edge lighting Weight: approx. 10,000 kg Caution: The rear stop display is somewhat imprecise (+/- 1 mm)

Condition: new, Year of construction: 2026, ABKANTBANK-Technik KRUSE, your competent partner for bending machines. Free delivery up to 150 km. Standard equipment includes piano inserts (segment-divided upper, lower, and bending beams) for a wide range of bending options. Cassettes and special profiles with opposing bends can be easily manufactured with this model. Swivel bending machine, universally applicable for sheet metal workers, repair shops, and roofing companies. Hnedpfx Anezuvbwjdjr Segments can be individually moved and removed. Segmented tools on all beams allow for ample space for complex workpieces. Bending machine SGR 1250/1.5 Technical data: - max. working width: 1250 mm Other dimensions 1000 mm and 1400 mm available upon request. - Segments: 30, 40, 50, 60, 70, 100 mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.5 mm - Weight 250 kg Option to mount a guide rail for a roller shear: 300 EUR Accessory: roller shear (up to 0.8 mm): 350 EUR All prices are subject to 19% VAT. CE certificate Warranty: 12 months. Self-collection is possible. Shipping within Germany: 220 EUR.

Condition: new, Year of construction: 2026, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR2000/0.8 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 1400mm - Sheet metal thickness up to 1,2mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 145° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 125kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Self pickup Certificate CE Guarantee: 12 months. Hsdpfx Anozuvbqjdonr Self pickup

Condition: new, Year of construction: 2026, The ZGR1400/2.0 press brake from Prod-Masz is available on-site for testing and immediate purchase. Free delivery up to 150 km. You will receive on-site technical training. -Working width: 1400 mm -Sheet thickness up to 2.0 mm (non-ferrous metals) -Bending angle up to 145° Hsdpfjzuvbkox Andsnr -Throat: 80 mm -Degree scale -Stop for pre-set bending angles -Sheet metal storage -Front depth stop -Weight: approx. 175 kg -CE certificate -12-month warranty Accessories - Roller shear (up to 0.8 mm): 350 EUR Shipping within Germany: 180 EUR Please note that all prices are subject to an additional 19% VAT. Self-collection is possible. Other dimensions (1000, 1400, 2140, 2640, 3140, 3640, 4140 mm) are available upon request.

Condition: new, Year of construction: 2026, BENDING BENCH technology KRUSE, YOUR competent partner when it comes to BENDING BENCHES Standard with piano inserts (segment-divided upper, lower and bending beam) for a large number of bending options Cassettes and special profiles with opposite bends are easy to produce with this model Swivel bending machine universally usable for tinsmith shops, repair shops and roofing companies Segments can be moved individually and removed Cant bench SGR 650/1.0mm Technical specifications: Hnsdpfx Aezuvbdsndsr - maximum working width; 650mm - Bending angle max. 160° degrees - Bending beam 15mm - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) - degree scale - passage 50mm Total length: 1000mm Height: 450mm Weight 60kg All prices are plus 19% VAT. Certificate CE Guarantee: 12 months. Pick-up is possible Shipping within Germany €100

Condition: new, Year of construction: 2026, This machine is located in Halver. We are your competent partner for bending machines. We are your contact for high-quality sheet metal processing. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we address the needs of our customers on site and consider ourselves an extension of the production department. Upon request, we can demonstrate the corresponding machines and provide expert advice and professional training. We offer individual advice tailored to your needs and look forward to your inquiry. The SGR-1000 model is characterized by removable upper and lower segments. In addition, the bending beam is divided into segments. Furthermore, a foot lever is mounted to open the upper bending beam. - Segments of an upper and lower clamping beam expand the range of applications. Hnjdpfxszuva Tj Ander - Blocking with the help of a pedal allows the hands to be free, and a sheet can be freely positioned. - Bending machine for universal use in repair and body shops. - Compact design, modern shape. - Manual bending machine for standard tasks. - Segments of an upper clamping beam expand the bending possibilities. Technical data: - max. working width: 1000 mm - Segments: 30, 40, 50, 60, 70, 100 mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.5 mm - Weight 235 kg Option for mounting a guide rail for a roller shear: 300 EUR Accessory roller shear (up to 0.8 mm): 350 EUR All prices are subject to 16% VAT. CE certificate Warranty: 12 months. Self-collection Shipping within Germany: 180 EUR

Condition: new, Year of construction: 2026, ABKANTBANK-Technik KRUSE, Your competent partner for bending machines. Standard equipment includes piano inserts (segment-divided upper, lower, and bending jaws) for a wide range of bending options. Hnodpfx Aozuva Hsndsr With this model, it is easy to produce cassettes and special profiles with opposing bends. Swivel bending machine, universally applicable for sheet metal workshops, repair shops, and roofing companies. Segments can be individually moved and removed. Segment bending machine SGR 1400/1.5 Technical data: - max. working width: 1400 mm Other dimensions, 1000 mm and 2050 mm, available upon request. - Segments: 30, 40, 50, 60, 70, 100 mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.5 mm - Weight: 285 kg Option to mount a guide rail for a slitting shear: 300 EUR Accessory: Slitting shear (up to 0.8 mm): 350 EUR Please note that all prices are subject to an additional 19% VAT. CE certificate Warranty: 12 months. Self-collection is possible. Shipping within Germany: 180 EUR.

Condition: new, Year of construction: 2026, SERVICE CENTER HALVER FOR BENDING TECHNOLOGY. Your competent partner for bending machines. We are your contact for high-quality sheet metal processing throughout Germany. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we address the needs of our customers locally and see ourselves as an extension of the production department. If required, the machines can be demonstrated, along with expert advice and professional training. We offer individual advice tailored to your needs and look forward to your inquiry. The Prod-Masz RED2200/0.8 bending machine, mounted on transport rollers with a 60mm/45° cutout, is available for testing and immediate purchase. Technical data: -Working width 2140mm -Sheet thickness - steel up to 0.8mm -Non-ferrous metals 30% greater sheet thickness -Bending angle up to 145° -Bending flange: 15 mm -Throughput: 80 mm -Degree scale -Stop for pre-set bending angles -Storage for sheets -Front depth stop -Weight approx. 250kg Other dimensions (1000, 1440, 2140, 2640, 3140, 3640, 4140mm) available upon request. Please note that all prices are subject to 19% VAT. CE certificate Warranty: 12 months. Self-collection is possible. Hnedpfozuvayjx Andsr Accessories: Roller shear 350 EUR Shipping within Germany 180 EUR

Condition: good (used), functionality: fully functional, machine/vehicle number: 02212007, control type: CNC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, Swing bending machine in excellent condition. It is powered on and can be inspected at any time. Hedpfx Ansx Eiw Todjnr

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 17,000 h, Trumpf TruMatic 6000 FMC -1300 Sheetmaster + Gripmaster Manufacturer: Trumpf Type: TruMatic 6000 FMC -1300 Year of manufacture: 2006 Condition: used Operating hours NC hours: 70,305 h Beam-on hours: 17,217 h Control: Siemens Sinumerik 840 D Punching force: 220 kN Laser power: 2700 W Working area, laser operation approx.: 2585 x 1280 mm Working area, punching operation approx.: 2585 x 1370 mm Max. sheet thickness approx.: 8 mm Support table, brush tables CE marking Standard equipment: Stable, easily accessible C-frame Coordinate drive with integrated linear magazine, 21 positions for tools and clamping elements 1 clamping element Maintenance-free three-phase servo motors Part eject chute 500 x 500 mm (sensor-monitored) HI-LAS high-pressure cutting TRUMPF Laser: CO2 laser TLF 2700 High-frequency excitation Laser control TASC 3 Cutting head: Laser cutting head 5″ Laser cutting head 7.5″ Quick-change device Cutting gas pressure setting programmable Distance control DIAS ContourLas Hnsdexwmuaepfx Andor Punching head: Hydraulic mono-tool holder, 360° rotation Programmable stripper Tool spray lubrication Punch slug extraction Control: Sinumerik 840D 10.4″ TFT color display Teleservice Automatic shutdown 3.5″ floppy disk drive RJ45 network connection MDE interface Safety: Multi-beam light barriers Rapid shutdown, hydraulics Compact dust extraction system Options: Automatic shutdown Threading former Softpunch Adaptive stroke calibration Follow-up cylinder Individually opening clamps Chip conveyor with container Multishear Multitool Control Brush tables Automation SheetMaster (parallel loading and unloading) Scissor lift table Chip conveyor with container TrumaGripMaster TrumaSortmaster R4 TwinCarts (unloading) Spreader magnet Rotor scanner (unloading monitoring) Autolas Plus Remaining grid pallet 2500x1250mm

Condition: excellent (used), Electric coil feed, straightening, and cut-to-length machine – in top condition – ready for immediate use – retains its value. For sale is a coil feed and sheet metal straightening machine. With this machine, you can roll out strip metal up to 125 cm x 2.5 mm thick into flat sheets without any waves, or simply straighten heavy coil packs. You enter the desired length, and the machine feeds out the strip metal and cuts it to size. The machine is ideal for facade builders and sheet metal workers who require flat, wave-free metal. What is special about this machine is that it has six straightening rolls; most machines operate with three or a maximum of four rolls. The machine is in very good technical and optical condition. 125 cm x 2.5 mm. Includes loading. Hsdpfxjzut Rvj Andonr Sale: • Machine price, net • You will receive a proper invoice with VAT shown. • Shipping or freight forwarding is possible (upon request). • Inspection is possible by appointment. Please note: If you are interested, please contact us by phone. Phone: You can also find other sheet metal working machines in my other listings. Quality you can rely on. Are you looking for an honest, value-retaining, technically flawless machine in well-maintained, refurbished condition that fits into a modern and successful business? Then you have come to the right place. Each machine is inspected in our own workshop.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 10056 196, number of rollers: 3, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, overall weight: 34,000 kg, Haeusler hydraulic roller, type RMA 2500/30. Machine in good working condition. Hnjdjzutixspfx Andsr Capacity: 30 mm steel x 2500 mm.

Condition: good (used), punching/shearing machine GEKA Hydracrop 80/A Angle 130 x 130 x 13 mm Flat bar 450 x 15 mm Round bar 45 mm Hnodpfx Aozurz Hjndor Square bar 45 mm Punch ø40 x 14mm Double-acting Equipped with an automatic side stop Weight approximately: 2500 kg

Condition: good (used), functionality: fully functional, XOCA 2000/5 sheet metal bending machine. Hodpfxozurxlj Andsnr

Condition: good (used), functionality: fully functional, CNC bending machine CTO 80/2500 Hnjdpfx Aszurxfendjr