Pressing force 32 to
Bffga9gmye
Bending length 2,250 mm
Delivery time approx. 12 weeks from the date of placing of the order
Bending length: 2,250 mm
Bending force: 32 to
Pressure: 52 to
max. sheet thickness: 2.5 mm
max. bending angle: 135°
The laser punching machine TRUMPF TRUMATIC 6000 was produced in 2007.
Technical parameters :
- CNC control: Siemens Sinumerik 840 D
- laser power: 2700 W
- maximum sheet thickness: 8 mm
- punching force: 220 kN
- laser cutting time: 2603 h
- laser activation time: 52833 h
- active clamp (programmed in steps): 4.5-20 kN
- maximum weight of the workpiece: 230 kg
- maximum through-height in punching mode: 35 mm
- maximum cruising height in laser mode: 22 mm
- speed in the X axis: 90 m / min.
- spe...
pressure 40 t
chamfer lenght 1270 mm
distance between columns 1050 mm
column arm 350 mm
dayligth 387 mm
max. ram stroke 170 mm
feed down 140 mm/sec
feed up 170 mm/sec
pressing speed 17 mm/sec
main drive 5,5 kW
table height 850 mm
back stop - adjustable 800 mm
adjustment speed 230 mm/min
total power requirement 5,5 kW
weight of the machine ca. 3,22 To.
dimensions of the machine ca. 2,15 x 2,3 x 1,65 m
Nlof7
pressure: 40bending length: 1300column width: 1300daylight: 375stroke lenght (max.): 150messurements (LxWxH): 1880 x 2435 x 2320 mmweight approx.: 3400motor power: 2 x 3,8
0nehsb0z
pressure 65 t
chamfer lenght 2500 mm
distance between columns 2050 mm
table width 140 mm
table height 750 mm
total power requirement 8 kW
weight of the machine ca. 4,5 t
dimensions of the machine ca. 3, x 1,2 x 2,6 m
Fh7agr2
Equipment:
manual back stop
upper and lower tools
2 manual operation / foot switch
length 6.000 mm
Be7xqjuv2z
weight 0,8 t
Pressing force 50 to
Bending length 2,800 mm
Delivery time approx. 12 weeks from the date of placing of the order
Nn23f
Bending length: 2,800 mm
Bending force: 50 to
Pressure: 100 to
max. sheet thickness: 3.2 mm
max. bending angle: 135°
Press brake CNC CAP 20040
Producer: Uzma
YP: 2010
Cybelec control... DNC 880S
Force of pressure... 606
D8wy020f
Bending length... 2100mm
controlled axes... 4
Machine is in good technical condition.
pressure: 40bending length: 1300column width: 1000daylight: 400stroke lenght (max.): 180column throat depth: 300messurements (LxWxH): 2125 x 1950 x 2100weight approx.: 2500motor power: 5,5
Mujyew
Standard equipment:
KK-Industries GmbHhas the general agency of the KK Kletzer group of companies.
We have put together a high-quality model for Europe.
The CNC press brake KK-Industries made by KK Kletzer bursa Turkey
Model KK Kletzer EUROPA Maxima XL
The strong press brake KK Kletzer Europa Ma...
pressure 28,0 t
chamfer lenght 1000 mm
distance between columns 890 mm
throat 200 mm
stroke 200 mm
dayligth 305 mm
return speed 30,0 mm/sec
back stop - adjustable 500 mm
working feed 8 - 10 mm/sec
Control NC Boschert
weight 3.500 kg
total power requirement 5,5 KW
range L-W-H 1460 x 1310 x 2030 mm
++ general overhaul v. Manufacturer in 2016
Furnishing:
- controlled / electr. Back gauge
- R axis can be adjusted manually
- Tool holder system "A"
Pueaiy
- Upper wedge crowning
- Insert tools
- f...
Catalog No. : 4657
Type: DYNA 40/15
Producer: LVD
Made in: 2017
Characteristic:
Control system: EASY-FORM 135/30
Maximum force (pressing): 400 kN
Maximum bending lenght: 1530 mm
Oxc7h
Maximum length of the slider stroke: 200 mm
Maximum distance from the table to the slider: 400 mm
Distance between frames: 1535 mm
Maximum approach speed: 100 mm/s
Maximum bending speed: 25 mm/s
Power demand: 16.5 kW
Back gauge: X. R. Z1. Z2
Machine height: 2500 mm
Machine width: 1205 mm
Machine weight...
Bending length 2000 mm
Max. pressure 35 ton
Brty8nshkr
Hydraulic
Equipped with:
Lots of tooling
Eclair press brake model AP
8mm, 3000mm
O9e2j
pressure 30 t
chamfer lenght 1500 mm
distance between columns 1000 mm
throat 200 mm
table surface area 1500 x 70 mm
table height 720 mm
adjustment of upper beam 26 mm
stroke of upper beam 105 mm
Betg2b3ioe
ram - range of adjustment mit Handrad: 26 mm
distance between table / ram 155 - 260 mm
quantity of oil 100 l
hydraulic drive 4 kW
dimensions of the machine ca. 1,6 x 1,1 x 2 m
weight of the machine ca. 1,8 t
Electric 380 Volt
Foot pedal
Diverse tools
Back gauge motorized
Approved on...
pressure: 20bending length: 900column width: 900daylight: 325stroke lenght (max.): 150messurements (LxWxH): 1760 x 1280 x 2190 mmweight approx.: 1950motor power: 3,8
G7rtmsx
pressure 30 t
chamfer lenght 1550 mm
distance between columns 1400 mm
ajustment speed 130 mm/sec
working feed 8,0 mm/sec
stroke 165 mm
column arm 205 mm
table width 35 mm
weight 1.700 kg
total power requirement 3,0 kW
range L-W-H 2140 x 1220 x 2130 mm
Furnishing:
- EURO III - (CYBELEC) CNC control
- Control swiveling
- electr. Back gauge (X axis)
- 2x manually adjustable backgauge fingers
N00g7
- hydraulic upper tool clamping
- 2 hand control / foot switch
- Operating instructions machine + c...
.
Technical DATA :
.
Press force 20 to
bending length 1070 mm
Throat 155 mm
stroke 50 mm
.
W x D x H approx. 1.3 x 0.9 x 1.7 m
Weight approx. 1,5 to
.
.....
Thgc9euh
.
with set of tools, with backgauge with manual adjustment, groove in table 14mm, two-hand operation, foot switch,
Machine will be repaired, checked, cleaned and then fully functional by a specialist. Test run will be carried out.
Pressure: 40 t
folding length: 1250 mm
Colour: white/blue
Machine weight: 2000 kg
space requirement: 1400 x 1200 x 2100 mm
Total power requirement: 32 A
back gauge: 600 mm
installation height: 300 mm
Hgrjzdn
Clearance in the side stands: 1050 mm
table width: 140 mm
stand...
machine number 20301, capacity 110to x 3050mm, approx. 7500kg, 14kW, year 01/1993, accessories: complete tools, monitor MNC95/C
Bt2fa7thwu
Year of manufacture: 1994
pressing force: 350 kN | bending length: 1100 mm | weight: 7100 kg |
stop arm type RNC 301
Btwzy3gqdm
Control system: Cybelec DNC90
According to the latest safety regulations retrofitted camera monitoring.
The press brake can be inspected at any time.
pressure: 60bending length: 1550column width: 1250daylight: 410stroke lenght (max.): 220column throat depth: 400messurements (LxWxH): 2445x2200x2390weight approx.: 4250motor power: 7,5Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very la...
pressure 40 t
chamfer lenght 1270 mm
distance between columns 1050 mm
column arm 350 mm
dayligth 387 mm
max. ram stroke 170 mm
feed down 140 mm/sec
feed up 170 mm/sec
pressing speed 17 mm/sec
main drive 5,5 kW
table height 850 mm
back stop - adjustable 800 mm
adjustment speed 230 mm/min
total power requirement 5,5 kW
weight of the machine ca. 3,05 To.
Bsy9lfeem2
** very good condition / new price ~ 35.000 euros
Furnishing:
- 2D graphic CNC control CYBELEC DNC 600 S
- Motorized backgauge with...
Bending length 1275 mm
Max. pressure 50 ton
Controlled axis:
Y1-Y2-X-R-Z1 & Z2
Control:
Delem DA 65
Working hours:
38758
Equipped with:
Various segmented top tools (see photo)
Light guard
Etc9g2v
Compact electric press brake C9
CoastOne - Made in Finland
Press force: 22T
Bending length: 900mm
Spindles: 1x22T
Control: TC15-2D graphics
Back stop: 2-axis controlled X-R axes
Lazersafe light barrier: 100mm / s feed speed
Press brake tool holder: Type A / R1 / ES Style / AMADA Promecam
1x set of folding tools incl.
36 months warranty after installation
O7lsf
Delivery plus; available immediately
Viewing under power is possible at any time by appointment!
LVD - DYNA 40/15 - 2017- under power, can be inspected in running condition - very good condition as showed on photos
Jv2tia
pressure: 40bending length: 1530column width: 1530daylight: 590stroke lenght (max.): 300messurements (LxWxH): 2660x1960x2500weight approx.: 4600motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages 100% electric, 0% hydraulic oil Up to 50% less energy consumption compared to conventional hydraulic press brakes High efficiency and accuracy High bending speed and much quieter Total length usable between the frame Lower m...
pressure 35,0 t
Buvpgsjrq
chamfer lenght 1600 mm
distance between columns 1150 mm
column arm 400 mm
stroke 265 mm
oil volume 125 ltr.
dayligth 830 mm
table width 230 mm
working feed 0,1 - 10,0 mm/sec
ajustment speed 100,0 mm/sec
return speed 80,0 mm/sec
total power requirement 6,5 kW
weight of the machine ca. 7.100 kg.
range L-W-H 2000 x 1750 x 2900 mm
Furnishing:
- CYBELEC DNC 7000 control
- electr. Back gauge
- R-axis pneumatic
- 4x rear sleepers
- a lot of tools
- rear table supports, heig...
WORKING RANGE PRESS BRAKE
.. total force (nominal): 20 to
.. Working length: 800 mm
.. distance between columns: 630 mm
.. Max. throat of columns: 250 mm
.. distance table - slide max.: 370 mm
BENDING BEAM (Y-AXIS)
.. stroke: 102 mm
.. approximation velocity max.: 82 mm/s
.. working velocity max.: 9 mm/s
.. return velocity max.: 90 mm/s
Ds2zxgqn8
ATTACHMENTS -PRESS BRAKE-
.. European CE standards: yes
ELECTRICAL SPECIFICATIONS
.. total power consumption: 2.2 kW
.. mains voltage: 400 V
.. mai...
press brake -second hand-
Dgun8by
ECLAIR - Typ AP
working lenght 310cm
capacity (see photo)
outside dimensions: L x W x H = 310 x 1,6 x 2,7m
Hydraulic press brake make REDMER type KAP 35/1250
Machine # 2199 Year of construction 1990
Bsxij09c3f
technical data:
max. pressing force 35 t
working length 1250 mm
motor power 4,0 kW
outer dimensions approx. 2000 x 900 x 1700 mm
with
- back gauge adjustable from the front
- foot switch
used, in very good condition
DIRINLER - CDCS 401 P - 1996- pressing power 400 kN- stroke length 64 mm- strokes per minute 148- distance bteween table and slide 310 mm- max tool weight 240 kg- weight 2600 kg- motor 4 kW- dimensions L1300 x W1600 x H2200 mm- used condition
N3ocj
Technical parameters
Maximum thickness of bent sheet (S235) up to 3.0 mm
Nominal pressure 400 kN
Maximum length of bent sheet 1600 mm
Depth of the beams 200 mm
Maximum stroke of the moving beam 100 mm
Maximum opening height 295 mm
Distance between beams 1000 mm
Rear fender clearance 500 mm
Engine power 4.5 kW
Weight 2500.0 kg
Driver E21
(Mounted on movable arm.)
Br9sazip2z
Controls X-axis (rear bumper) and Y-axis (bending beam)
Allows the creation of up to 40 programs.
Each program can consist o...
pressure 40 t
chamfer lenght 1000 mm
distance between columns 800 mm
column arm 250 mm
ram stroke speed 110 mm/sec
return speed 105 mm/sec
work speed 11 mm/sec
work stroke 100 mm
oil volume 60 ltr.
table height 800 mm
table width 90 mm
voltage 400 Volt
engine output 4,0 kW
back stop - adjustable 500 mm
Weight 2.750 kg
range L-W-H 2600 x 1950 x 1850 mm
dayligth 308 mm
** from a maintenance workshop (!!)
** New price ~ 26,000 euros
Tqq7i0p
Furnishing:
- CYBELEC CNC control model DNC 60
- contr...
Neat used Beyeler press brake
Type EURO II 30 1550
Capacity: 1550 x 30 tons
Machine is equipped with Cybelec ModEva 12S CNC control
CNC controlled Y1, Y2 and X axis
Ymhc8
Safan servo driven press brake type SMK-K-40-2050 TS1
Bpyo0ag2no
working width 2050 mm
max pressing force 40 tons
Safan cnc touch screen control
CNC controlled Y-X-R-Z1 and Z2
1
The small bench HW2,5x300 for the workbench vice, is ideal for every craftsman, do-it-yourselfer or other company.
Data
-bending length 300mm
-sheet steel 1,0mm
-aluminium sheet 1,2mm
-narrow steel sheets up to max. 1,2mm possible aluminium up to 1,5mm possible
-weight approx. 12Kg
Dyhmvzl
-external dimensions: WxDxH (mm) 350x60x600
AMADA PROMECAM - RG 50/25 - 1973- pressing power 50 t- dimensions L2050 x W1400 x H2000 mm- side table 1300x1600x1100 mm- weight 3500 kg- electric supply needed 3x400V / 50Hz
Dyhvdkl
Table dimensions: 1250 mm
Bxotdmbs
Description:
The machine is in good technical condition, by prior arrangement the possibility of testing. Servo-electric press brake with ram drive by means of ball screw. The frame of the press is made of robust metal welding. The control system reads the position of the ram from the linear sensors and controls the corresponding servomotor, ensuring a bending depth programmable in 0.01 mm. The high power servo motor is protected against overload. Transfer prog...
pressure 40 t
chamfer lenght 1000 mm
distance between columns 800 mm
column arm 250 mm
ram stroke speed 110 mm/sec
return speed 105 mm/sec
work speed 11 mm/sec
work stroke 100 mm
oil volume 60 ltr.
table height 800 mm
table width 90 mm
voltage 400 Volt
engine output 4,0 kW
back stop - adjustable 500 mm
Weight 1850 kg
Or09p
range L-W-H 2600 x 1950 x 1850 mm
dayligth 308 mm
Used Amada Promecam IT2 25-12 1.2metre x 25ton hydraulic upstroke nc pressbrake for sale
Technical information
Capacity: 25 Ton x 1250 mm
Bswf2oryms
Backgauge: Front operated – powered X axis
Max stroke: 105 mm
Complete with safety guards
Amada auto-backgauge control
New/year: 1988
While the nc control can store bends the machine can be used as a stand alone manual machine
Working length 2080 mm, Capacity 35 to, Gap between column 1600 mm, Throat gap 220 mm, Dimension 2300x1600x2250 mm, ca. 3800 kgs, Back gauge motorised 1000 mm, Sidestop 1000 mm, Tool
B0q8gpkm
DIRINLER - CDCS 250 P - 1996- pressing power 250 kN- stroke length 74 mm- strokes per minute 155- distance bteween table and slide 320 mm- max tool weight 240 kg- weight 2300 kg- used condition
Xntwk
The EQPB BabyPress is a hydraulically operated table model with CNC control.
It is a robust and low-noise machine that has been specially developed for the production of small parts. The entire production, from the hydraulic cylinder to the control cabinet construction, takes place in-house.
The advantages:
- Basic C-frame design
- Compact table model
- Ideal for prototypes and small series
- Very short set-up time
- Functionally simple
- Wide range of applications
Standard basic design:
- Upper...
Item number MA1109
Manufacturer EHT
Type EHPES 3-12
Year of manufacture 1987
Machine-No. 201673
bending length [mm] 1250
pressing force [to] 30
Control Cybelec DN 7000
length [mm] 1800
width [mm] 1200
height [mm] 2550
Weight [kg] 3800
Connected load 380 V
Bk9hw39w
Accessories Various tools / Circuit diagrams / Programming instructions
Pressure capacity 40 t
folding length 1270 mm
Passage between the uprights 980 mm
throat 200 mm
Installation height 320 mm
stroke 100 mm
Working speed 10 mm/s
Drive power 4 kW
dimensions L x W x H approx. 1950 x 1450 x 2100 mm
Weight approx. 3200 kg
Accessories / special features:
- Manual operation for the motorized immersion depth as well as the back gauge.
o Ball screw spindles
o Fine adjustment via handwheel
- Upper tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm,
slightly cranked, ...
Used Promecam non cnc pressbrake for sale
Small used pressbrake for sale
Make Promecam
Model RG25/12
Condition Used
Machine Capacity 25 ton x 1200mm
Description
Hydraulic upstroker with front operated backgauge.
European style top and bottom tool clamping and front treadle for control.
Dimn. between side frames 1020mm. Throat depth 200mm.
Bsdx2mi7e2
Promecam Rg 25 12
specification
PROMECAM RG 25-12 HYDRAULIC PRESS BRAKE STOCK 00981
PRESS BRAKE
POWER HYDRAULIC
CAPACITY 25 TONS
BENDING LENGT...
Press brake Boschert Profi 1000 CNC with Labod control. Machine was completely checked and service was carried out (cleaning valves, oil change, oil filter exchange). Before delivery of the machine, UVV-test is carried out. Machine is equipped with new tools over the entire working width (die V20 with 86°, punch cranked 86°).
Bpkpp8mty
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Photo gallery: The World's 10 biggest excavators
Morlock Motors official partner of Machineseeker and Truckscout24
10 valuable tricks for buying used machines online
How to receive 100% of our e-mails
Photo gallery: the 10 strongest forklift trucks in the world
