Used Manuals for sale (13,635)

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 70IH1492, 1 x Webomatic mobile shrink / dip tank. Designed for small to medium-sized production capacities. They process all kinds of shrink bags and are therefore suitable for all manner of different product types. Technical Specification ⚙️ ✅ Model - ST 40/60-II. ✅ Year of manufacture - 2000 ✅ Serial number - 70IH1492. ✅ Cycle capacity - up to 6 cycles / minute. Ksdsw Hqi Njpfx Affjnf ✅ Maximum product weight - up to 25 kg. ✅ Dipping platform - 400mm x 600mm. ✅ Water contents - 70 litres. ✅ Electric supply - 400 V / 50 hz / 3 phase. ✅ Power - 9.3 kW / 14.8 Amps.

Condition: used, mileage: 987,141 km, power: 355 kW (482.67 HP), first registration: 08/2018, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: intarder, color: blue, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro6, suspension: other, total length: 6,160 mm, total width: 2,550 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, second fuel tank, spoiler, = Additional Options and Equipment = - Adaptive cruise control - Alarm system - Aluminum fuel tank - Roof spoiler - Differential lock - High beam headlights - Air conditioning - Alloy wheels - Air-suspended seats - Air horn - Radio/CD player - Warning beacon - Sleeper cab - Sun visor - Power take-off (PTO) = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Axle Configuration Brakes: disc brakes Front axle: Tire size: 385/65 R22.5; Alloy rims; Max. axle load: 8,000 kg; Steered; Suspension: parabolic springs Rear axle: Tire size: 315/70 R22.5; Twin tires; Differential lock; Alloy rims; Max. axle load: 11,500 kg; Reduction: single reduction; Suspension: air suspension Weights Curb weight: 8,550 kg Payload: 11,950 kg Gross vehicle weight: 20,500 kg Financial Information Knedpfxjw Afxqe Affjf Price: On request Identification Registration number: 96-BLB-8 Further Information Contact Maurits Van Giessen for more information.

Condition: new, Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Knodpfsu Abb Tox Affef Hand wheel to blade ratio 1:3

Condition: new, Manual slicer for prosciutto and other permanent cured meat products Knedou Aa U Sopfx Affof Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Hand wheel to blade ratio 1:3

Condition: new, Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Setting the thickness of the slice from 0 to 2.5 mm Hand wheel to blade ratio 1:3 Kedou Abdhopfx Affonf

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516330J00044, Year of construction: 2018, operating hours: 1,265 h, load capacity: 4,990 kg, lifting height: 4,000 mm, mast type: duplex, fork length: 1,200 mm, fork width: 1,150 mm, TECHNICAL DETAILS Lifting capacity: 4,990 kg Lifting height: 4,000 mm Clearance height: 2,800 mm Fork length: 1,200 mm Maximum fork width: 1,150 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 mm x 1,400 mm x 2,800 mm Unladen weight: 7,726 kg Mast: Duplex Number of wheels: 4 Drive: Electric Battery Brand/Type: 80V 6PZM 930 Year of battery: 2021 Capacity: 930 Ah Battery voltage: 80 V Battery test result: 60% Operating hours: 1,265 h Knsdpfx Afox Hzzisfjf EQUIPMENT Side shift Non-marking tyres Work lights CE marking User manual

Condition: like new (used), functionality: fully functional, machine/vehicle number: Geo Knight Maxi - Press, Year of construction: 2017, Please see PDF for detailed secifications: The Maxi Press AIR is an Automatic large format heat transfer press intended for more automated and higher pressure needs than the Manual version. The Maxi- AIR provides an oversized platen & a better production-oriented press with a single front loading table and high pressure pneumatic lifting system. This pressure system is powered by a dual air-bag, 10-ton, 20,000 lbs max force self leveling mechanism. The press is activated with a push of a button, and automatically releases at the end of the timing cycle. The front console features the Digital Knight control, regulating digital temperature and digital automatic timing control, as well Knodjv Dm Udjpfx Affjf as full air pressure regulation. Ideal applications that the Maxi- AIR has performed flawlessly include: large fabrics & piece goods, full-bleed printed sportswear, banners, fl oor mats, carpets, mouse pads, plastics, sheet metal and much more. Most importantly, the 20,000 lbs of regulated applied force allow for deep embedding of materials such as TILES into nomex padding for full bleed wrap-around printing, as well as larger embossing applications. The Maxi- AIR strongly supports the sublimation transfer process, as well as digitally produced transfers, hot and cold peel plastisol transfers and large format laminating processes.

Condition: excellent (used), Year of construction: 2018, operating hours: 14,000 h, functionality: fully functional, SMX 3100LS (2018) Fanuc-31iB5 X : 630 mm, Y : 300 mm (±150), Z : 2585 mm, A : 2500 mm, B : 240 (±120) deg Max. Length : 2540 mm Turning diameter : 660 mm Swing over bed : 660 mm Main Chuck size : 15" (381 mm) Sub Chuck size : 12" (305 mm) Bar working Dia : 102 mm Main spindle RPM : 4000 Sub spindle RPM : 3000 Milling spindle RPM : 12000 C1 axis : 0.0001 degree C2 axis : 0.001 degree Milling spindle B axis : 0.0001 degree Tool taper : CAPTO C6 Coolant for Milling spindle 70 Bar 80 ATC 4 Long boring bar ATC AICC 600 Blocks Ball Screw cooling system : X axis Linear scales : X, Y, Z, B axis Kodpfovk Hlpox Affjnf Tool setter Automatic type Hydraulic Steady rest : SMW Autoblok K5.1Z (D100-D410) Auto door Air conditioner Air gun Coolant gun Mist collector Oil skimmer Chip conveyor (Right side_hinged type) Bucket Manual books Linear Guideway MPG handle Transformer

Condition: used, Year of construction: 1987, Please contact ATS Norway for more information Please provide reference number upon request: 21749 Specifications: 1987 model Not EU approved 3 axles Length: 1350 cm Length lower level: approx. 7.28 m Length of our plan: approx. 3.25m Width: 2.5m Manual widening: 50 cm Tires (see pictures) Ready for delivery Ksdpfx Afjxvk Uhofjnf   Description: 1987 Damm 3SD335 3 axle machine trailer. The trailer is not EU approved. Ready for delivery Technical approved: Yes EU-approved until: 17.10.2026 Own weight: 130 Width: 2,5 Length: 1350 Model: 3SD335 3 akslet maskintralle

Condition: used, functionality: fully functional, mileage: 325,522 km, power: 338 kW (459.55 HP), first registration: 10/2022, fuel type: diesel, overall weight: 8,510 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise: I-See Predictive Cruise Control - Map based topography information Cab: Globetrotter XL Battery system type: Single energy battery system (2 batteries) Engine & Turbo Package: D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Gearbox: I-shift Automated 12-speed - GCW 60 tonne Automatic transmission manual shift options: Standard transmission shift - I-Shift or Powertronic Engine Brake Type: Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver comfort Cab Climate Unit: Electrically controlled air conditioning with sun sensor Driver Seat: Comfort 4: suspended - belt in seat Passenger seat: Comfort 4: suspended - belt in seat Top bunk: Height adjustable foldable top bunk 700 x 1900mm Lower bunk: Lower bunk 815mm wide in the centre Aux. cab heater: 1.8kW Air to air Refrigerator: 33 litre under bunk mounted fridge / freezer with dividers I-park cooling Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Tyre Size: 315/60R22.5 Drive Axle Tyre Size: 315/60R22.5 Fifth Wheel Type: SAF-Holland/+GF+ SK-S 36.20 cast fixed fifth wheel Wheelbase: 3800 mm Drive Axle Ratio: 2.17:1 Fuel tank - RHS: 570litre aluminium diameter 710mm Fuel tank - LHS: 900 LITRE, LEFT SIDE FUEL TANK WITH STEPS Plastic AdBlue Tank: 65 litre under/behind cab Cruise Control: Eco fleet software - with speed 85, I-See and push button I-shift Technology Secondary Information Display: Secondary colour information display FMS gateway: FMS gateway for Fleet Management System Driver attention support Kedpfex Nfl Djx Affenf Exterior Headlamps: LED headlamps Daytime Running Lights: V-shaped Front fog lamps: Front fog lights - white Cornering lights: Static corner lights - works with indicator at low speed to light up direction Air Deflector - Roof: Roof air deflector Side air deflector: Cab side air deflector - long tractor

Condition: new, total height: 3,300 mm, cutting width (max.): 1,200 mm, overall weight: 15,000 kg, power: 37 kW (50.31 HP), saw blade length: 7,750 mm, blade width: 160 mm, The PLUS are Mebor’s most advanced horizontal sawmills, with the latest innovations. PLUS band saws bring more production and speed, as well as versatility. The HTZ 1200 PLUS is performing with unmatched productivity in the price range. It is relied on by sawmills on all continents, from soft wood sawmills to quality oriented hardwood sawmills. Key features: • Fast return speed & servo controlled blade positioning, • Fast automatic control preventing operator delays, • High speed hydraulic log manoeuvring functions, • Precision made machine with top quality components. Mebor System® is our own system of horizontal band saws, which sets us apart from our competitors. With a Mebor band saw you will increase your productivity and yield, as well as decrease labour costs. Wood is unpredictable and for this reason Mebor band saws have a strong and robust construction. It guarantees reliability of functioning and minimises maintenance costs. Band saws adapted for your needs – for small and big sawmills.Every Mebor band saw is custom made ; therefore we supply each customer an optimal band saw for his needs. We will advise which model is most suitable for your needs and requirements. We will also adjust the configuration of the band saw; for example the distances between clamps according to the lengths of logs, equipment etc. Automatic board removing (Mebor System® ) We were the first to introduce the board removing system, which saves your time. After the band saw cuts a board, the board pusher pushes it off the band saw bed during the return of the band saw head. Simple and automatic, with no manual work. Automatic functioning - Mebor System®. It leads the operator during cutting. It provides important information, which helps him choose the optimal cutting for best output. Manual control is also available for less demanding users. Full log manoeuvring equipment is available for fast and effortless work. Ksdpfxjricwqe Affenf Precision of cutting is ensured by the solid construction and wide blades. All Mebor band saws are using wide blades (80-210 mm wide). The fact is that wide blades provide higher sawing speed, as well as better sawing precision. The high quality of your products will increase the satisfaction of your customers.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 27159, Year of construction: 2000, operating hours: 6,760 h, load capacity: 10,000 kg, lifting height: 3,770 mm, mast type: duplex, fork length: 1,530 mm, fork width: 1,330 mm, TECHNICAL DETAILS Lifting capacity: 10,000 kg Lifting height: 3,770 mm Clearance height: 2,870 mm Fork length: 1,530 mm Max. fork width: 1,330 mm Min. fork width: 390 mm MACHINE DETAILS Mast: Duplex Number of wheels: 4 wheels Drive: Electric Battery voltage: 72 V Dimensions & Weight Dimensions (L x W x H): 3,150 x 1,500 x 2,870 mm Unladen weight: 13,650 kg Operating hours: 6,760 h EQUIPMENT User manual Ksdpfex Hzvmex Affjnf Side shift Fork adjustment Work lights Camera

Condition: excellent (used), Year of construction: 2016, Ref: 11047 . 2016 EBA 721-06 LT Guillotine 72cm Automatic guillotine. Equipped with: Electro-mechanical blade drive Hydraulic clamp drive Infinitely adjustable clamping pressure (250-2000 kgs) with optical indicators Snap-in false clamp plate with optical indicator Spindle guided electro-mechanical back gauge drive for precise positioning Air table on front and rear table Knedpfx Afex Nfr Rsfof Foot pedal for pre-clamping or cutting line indicator Optical cutting line indicator with LEDS Durable stainless steel working surface on front table HSS steel knives Swing cut for more cutting precision Adjustable solid steel blade carrier guided on both sides Adjustable blade depth Stainless steel side tables (left and right) Electronically guarded front table area by photocell safety guard Transparent safety cover on rear table Two-hand safety activation with repetition blocking and control for synchronous operation Automatic return of blade and clamp from every position Main switch, safety lock and key Blade changing device with covered cutting edge Knocking-up device Features: 99 programs with up to 99 steps each Up to 9 repeat measurements can be integrated in one program step Program runs automatically – with electronic cutting monitor 10-button-keyboard for pre-setting of measurement 3 memory buttons available for individual measurement setting Electronic digital display with an accuracy of 1/10 mm ‘Set Function’ key for reference measurement Electronic hand wheel with infinitely variable speed for Fine adjustment of back gauge Push buttons for fast back gauge movement (forward and reverse) Automatic measuring correction in case of back gauge displacement Memory key for repeat cuts (manual) and additional automatic memory Paper eject function with and without program mode (advancing programmable) Delete and insert mode for correcting and modifying programs Integrated calculator Self-diagnostic system with error indication on display Metric and imperial changeover Specification: Cutting width: 720mm Cutting height: 80mm – 781mm Insertion depth: 720mm Front table depth: 530mm Minimum cut: 20mm – 901mm Back gauge speed: 53 mm/s Dimensions W x D x H in mm 1305/21002 x 1500/16002 x 1335

Condition: excellent (used), Year of construction: 2008, operating hours: 8,181 h, Equipment: ABS, additional headlights, adjustable boom, adjustable chassis, air conditioning, all wheel drive, cabin, differential lock, gripper hydraulics, hammer hydraulics, hydraulics, low noise, onboard computer, parking heater, standard shovel, For sale: fully operational and well-maintained LANZ FB 3000 material handler from 2008. The machine is in very good technical and visual condition, used in accordance with its intended purpose and regularly serviced. The sale includes a complete set of service documentation, operator’s manuals, parts catalog, and German documentation. ✅ Technical specifications: * Year of manufacture: 2008 * Operating hours: only 8,181 hours * Machine weight: approx. 4,500 kg * Drive: 4x4 – all-wheel drive * Engine: Deutz 4-cylinder turbo diesel, 77 HP * Hydraulic stabilizer outriggers Knodpfsuui Ahsx Affef * Spacious, glazed cab with full visibility * Clamshell grab – ideal for handling wood, scrap, or waste * Fully operational machine – ready to work immediately

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Kodpfx Aevvi I Rsffenf

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1000040377, total length: 2,000 mm, total width: 2,500 mm, total height: 2,100 mm, Equipment: CE marking, documentation/manual, MACHINE DETAILS Main motor power: 10 kW Voltage: 400 V Current consumption: 18 A Fuse: 32 A Output: 10.0 kW Knodpfx Afsx Hhc Hefof Dimensions (L x W x H): 2,000 x 2,500 x 2,100 mm Shipping units: 2 pieces EQUIPMENT Saw unit Documentation Electrical schematics User manual CE marking

Condition: excellent (used), Year of construction: 2017, Ref:11049 . 2017 Ideal 5221-95 EP Guillotine. 52cm programable guillotine Equipped with: Electro-mechanical blade and clamp drive Power ‘EP’ back gauge Control module Electronic hand wheel for manual back gauge positioning Infinitely variable speed control (from very slow to very fast) Optical cutting line Adjustable back gauge with narrow separations and plastic gliders Two side lays each on front and rear tables High-quality blade made from “Solingen steel” Solid steel blade carrier and adjustable blade guides Automatic clamping system, guided on both sides for evenly distributed clamping pressure Clamp can be lowered or raised independently from blade Machine and stand can be separated for transportation through narrow doors (70 cm) Side tables (left and right) SCS (Safety Cutting System): hinged, electronically controlled safety guard on the front table Transparent safety cover on the rear table Main switch and safety lock with key Electronically controlled true two-hand operation 24V controls (low voltage) Disk brake for instant blade stop Blade changing device with covered cutting edge Blade depth adjustment from the outside of the machine Easy blade change from the front of the machine without removing covers. Digital display for measurement readout in cm or inches (display accurate to 1/10 mm or 1/100 inch) 10-button keypad for presetting of measurement Memory key for repeat cuts | 9 programs with 9 steps in each program (up to 9 repeat cuts can be integrated into a program as one single program step) Setting of program steps via “Start” button ‘SET’ function key for reference measurement Programmable eject function – for pushing out the paper Two programmable keys for quick setting of frequently needed measurements Self-diagnosis system with error indication on display Specification: Knodpfsx Nfr Dex Affsf Cutting length: 520 mm Cutting height: 80 mm Narrow cut: 35 mm Table depth: 520 mm Power supply: 230 V / 50 Hz

Condition: excellent (used), I sell in very good condition thicknesser Hommel. Width 60cm. Working height 24cm. Motor power 3.7 KW. Manual adjustment, with 2 folding tables. Knedpoud Aryefx Affef

Condition: used, Year of construction: 2018, 5.5 kW main motor, frequency converter (2000-6000 rpm), motorized 2-axis scoring unit with its own drive. Motorized height adjustment in 0.1 mm increments. Motorized angle adjustment in 0.1° increments with digital display. 1090 x 630 mm miter gauge. Narrow and wide extraction hoods with quick-change function. Clamping shoe, sliding block, and manual quick-release clamp. Sliding carriage length 2150 mm (cutting length 2170 mm) - Quick-Scoring equipment packages - Scoring unit adjustable without tools from 2.8 to 3.6 mm - Miter gauge +45° - 45° - On/off switch on the sliding carriage. Storage location: Nattheim Knedpfx Afjvvkm Usfof

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, MACHINE DETAILS Voltage: 400 V Current consumption: 50 A Kodpfx Afsx Hhb Njfsnf Dimensions (L x W x H): 3,600 x 1,480 x 1,200 mm Transport packages: 4 units EQUIPMENT Electrical schematics User manual Operating system Tools for unit 1 Tools for unit 3 Tools for unit 4 Tools for unit 5 Tools for unit 6 Tools for unit 7

Condition: excellent (used), Year of construction: 2009, Ref:11042 . 2009 Horizon BQ-270 Ksdpfx Afjx Nfmhjfonf Excellent condition - Only 409,000 books produced! Single clamp solo binder designed for operation by one person. With auto calliper for automatic size setting Comprising: Touch-screen auto setting of thickness and cover scoring. Hand feed station Milling & roughing unit with dust bag Hot-melt spine glue unit with side gluing discs Automatic cover feeder with pressing unit Chute delivery unit Including tools, manuals and accessories Accessories: Auto calliper for automatic size setting Specification: Book size, Max: 660 x 320mm Min: 240 x 135mm Cover size, Max: 320 x 310 mm Min: 135 x 115 mm Thickness, Max: 50mm Min: 1mm Max speed : 500 cycles/hr.

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Knjdpjvwbp Ajfx Affjf

Condition: used, Year of construction: 1995, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Knjdpovvkqyjfx Affsf Material support: alternating plastic slats Measuring system: scale Saw head tilt: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Weight approx.: 1500 kg Dimensions: 6300 x 1500 x 2900 mm Motor power: 5.5 kW Stock location: Nattheim

Condition: used, Year of construction: 1996, max. cutting width: 5300 mm max. cutting height: 2200 mm saw blade diameter: 300 mm max. machining thickness: 80 mm Kedpfovvkq Hjx Affsnf saw blade bore: 30 mm material support: plastic slats measuring system: scale saw head tilting: manual saw feed: manual dust extraction: external extraction saw beam locking: manual weight approx.: 1500 kg dimensions: 6300 x 1500 x 2900 mm motor power: 5.5 kW storage location: Nattheim

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Knodpfx Afevvkfqsfef Storage location: Nattheim