Accessories and spare parts
424
Butt welders
36
Embossment welding machines
15
Flame-Cutting machines
57
Laser cutting machines
104
Other
229
Plasma cutting machines
193
Plasma cutting tools
48
Plate edge welding slanting machines
20
Robots
57
Spot welding machines
182
Water-jet cutting equipment and machines
39
Welding sets
666
Welding smoke suction
99
welding bench
420
Welding & cutting Offers
CNC portal flame cutting machine
Manufacturer: Microstep
Type: CombiCut A 4501.15+S800
Year of manufacture: 2006
CNC control
working area: 1.500 x 4.500 mm
Bnkgg7e9fn
shaft: 800 mm
1 autogenous torch with GCE FIT+
2 torch carriages available
Filter system Donaldson DFPRO 6 Cyclopeel
Make: KELLER, type: VARIO-4-P-N, year of construction: 2017, mobile, ser. no. 2426331, order no. 1052674 100 1, operating pressure ± 50 mbar, cleaning pressure max. 6 bar, operating temperature max. 40°, control, make Keller, fork-lift receptacle
Bm02iza8
pos. 67, no. 359
By order of the entitled persons we sell an air suction unit from Keller.
The general terms and conditions of Lüders & Partner GmbH apply.
Dimensions
Length
500 mm
Width
300 mm
Height
600 mm
Weight
150 kg
Length:500 mm
Width:300 mm
Height:600 mm
Vubhhu
Weight:150 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
Machine type MIG/MAG welding machine
Make MERKLE
Type CompactMIG 280 K
Supply voltage 3 x 400 Volt
Adjustment range 25 - 280 amps
Duty cycle 40 % ED at 280 amps
60 % ED at 230 amps
Current setting 14 switching steps
Cooling transformer by built-in fan
Cooling burner gas cooled
Design mobile compact unit
Wire feed 4-roller gear DV 26
fuse protection 16 ampere
Dimensions L x W x H 870 x 480 x 740 mm
Weight 105 kg
Special accessories Display and automatic wire feed
Age 12 months
Condition workshop...
Main Drive
Laser power 2.6 kW
Max Material Thickness
Steel 20 mm
Stainless steel 20 mm
Aluminium 15 mm
This Trumpf Trumatic L3030 laser cutting machine was manufactured in 1998. It has been working for approximately 60000 hours. The machine has a laser power of 2,6 kW. Its pipe laser cutting is up to 410 mm.
Brbnsmu8tu
Application Types
Laser Cutting
TIG welding rod, welding wire
Stainless, IK-resistant (wet corrosion up to 350 °C). Corrosion-resistant like similar low-carbon and stabilized austenitic 18/8 CrNi (N) steels/cast steel grades. Cold toughness down to -196 °C. Connections and surfacing of similar stabilized and non-stabilized austenitic CrNi (N) and CrNiMo (N) steels/cast steel grades. Connections and surfacing on cold-tough matching/similar austenitic CrNi (N) steels/cast steel grades.
-net weight: 5 kg
-Number: 2x package av...
cutting width:3100 mm
Kkvph9xr
Numbers of torche:4
Type of gas:Propan
The Sato Satronik D 4200 is a very reliable modern CNC controlled oxyfuel cutting machine in gantry design
Hypertherm HPR400
output 94 kva
O3xex
MXE control panel, for welding aluminum, stainless steel, steel,
Btnyb9flhi
synergic controlled, possibility to save programs, electrode welding, pulses, double pulses
Dimensions
Length
1.000 mm
Width
400 mm
Height
1.200 mm
Weight
200 kg
Downloads
MXE control panel, for welding aluminum, stainless steel, steel,
synergic controlled, possibility to save programs, electrode welding, pulses, double pulses
Length:1.000 mm
Width:400 mm
Height:1.200 mm
Weight:200 kg
Please Note: The information ...
Serial No. 9117
Control Weldstar 2000
Capacity 28kva
Input 415
Throat 600mm
Fitted with Water cooled tips
Length 1200mm
Width 600mm
Uia0r08
Nett weight actual. 150 Kgs.
Control Unit
Brand Fanuc
Model Power Mate
Btmrqfbpv3
Main Drive
Laser power 4000 kW
Movement
X-Axis Movement 8737 mm
Y-Axis Movement 1270 mm
Z-Axis Movement 368 mm
This Mazak 3D Fabri Gear 300V Laser Cutting Machine was built in 2009 in Japan. It is equipped with a Fanuc Power Mate control unit. It has been working for 11815 hours. This machine can perform with a laser power of 4000 kW. It presents perfectly good conditions, in 2021 - new resonator and complete service.
Application Types
Las...
Flame cutting pliers, electrode pliers, hose package
-Length: 3 m
-Price: per piece
-Number: 6x available
-Weight: 3.5 kg/piece
Ql0yy0vkr
1 used MIG/MAG pulse welder
Manufacturer: Esseti S.R.L.
Type: Query 350K
Technical data:
Power supply: 400V
Phases: 3
fuses: T20
Rated duty cycle in 10 minutes: 50%
Secondary rated current: 350A
Permanent SEc. current 100%: 240A
Rated power: 14 KVA
Continuous power 100%: 10,7 KVA
Overload protection: thermal
Control field: 40-350
Basic voltage S K: 60
Maximum secondary current: 380
Bvhb3lvc
Short circuit limit: 390
Possibility of rod electrode: 6
Equipped with gun and water cooling system
output 70 kva
ca. 20
weight of the machine ca. 460 kg
Ggbugrer
Length:400 mm
Width:200 mm
Height:250 mm
O7x09
Weight:25 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
Capacity Driver 150 tons, Idler 150 tons = 300 tons total
Work piece diameter Minimum 1000 mm - maximum 8000 mm
Tyre width 203 mm
Input 400 / 3 /50
Fitted with Mechanical anti - creep facility
Features Rotation speed 75 - 1500 mm per minute
Length Driver 4200 mm, Idler 4000 mm
Width Driver 1550 mm, Idler 1050 mm
Height Driver 1414 mm, Idler 1414 mm
Ufbozsu
Nett weight approx. 17000kgs
General Data
Measurements width 9800
Measurements depth 2900
Measurements height 2350
Machine weight 12000 kg
Controller
Brand AMNC 3i
Bokpqjmdus
Main Drive
Laser power 4 kW
Laser type CO2
Number of axis 3
Movement
X-Axis Movement 3070 mm
Y-Axis Movement 1550 mm
Z-Axis Movement 200 mm
Additional Equipment
Pallet changing system LST-3050 M2
Telescopic cabin - protecting against radiation
Laser head with capacitive sensor
Laser power control (DR)
Diode laser for positioning
Intelligent Cut Con...
TIG hose package, welding torch, hand welding torch, TIG torch
-with torch body
-Length: 7.5 m
Bugft3au
-Tuchel connector: 5-pin
-Water: cooled
-Weight: 4.3 kg
Mobile welding machine, make OrLaser Type HTS Mobile
Year 2018
Power 200 Watt
Oqvgd
Operating hours approx. 620
(further data on request)
floor-plate length 2500 mm
floor-plate width 1300 mm
floor-plate height 300 mm
Btnvn7zywo
weight of the machine ca. 2800 kg
Details:
Table length 2500 mm
Table width 1300 mm
Table height 300 mm
Machine weight approx. 2800 kg
Space requirement approx. 3 X 2 with underframe approx. 800 mm
Length:1.200 mm
Width:400 mm
Height:1.000 mm
Weight:50 kg
O7x0b
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
Serial No. C37803
Btkjqepjij
Amperage 250
Input 400/3/50hz
Duty cycle 40%@200A, 60%@160A, 100%@125A
Equipment Earth lead, Torch
Features Front casters rear wheels
Length 940mm
Width 500mm
Height 760mm
Nett weight actual. 80 Kgs.
General Data
Measurements width 13321 mm
Measurements depth 4550 mm
Measurements height 2555 mm
Bsebrua7zm
Control Unit
Brand Siemens
Model Sinumerik 840D
CNC main language Spain
Main Drive
Plasma power 2 kW
Workpiece
Workpiece weight 4000 kg
This ADIGE LT 120 Laser Cutting Machine was manufactured in 2006. It is equipped with a Siemens Sinumerik 840D control unit. This machine has a working record of 39583 production hours. The machine has a laser power of 2 kW. It is in good condition and ...
TIG hose package, welding torch, hand welding torch, TIG torch
-with torch body
-Length: 4 m
Bbxlxtb
-Tuchel connector: 5-pin
-Gas: cooled
-Weight: 2 kg
ampere 500 A
current capacity 30 kVA
Cietn7cc
voltage 400 V
total power requirement 42 A
weight of the machine ca. 0,2 t
dimensions of the machine ca. 0,6 x 0,7 x 1,2 m
MIG welding source transformer with 60 A/12-17 Volt - 500A/39-42 Volt
length / mm
height / mm
Btnv90akik
total power requirement / kW
Type: US 100 E 300
Nominal power: 100 kVA
max. weld length: 324 kVA
Length:1.200 mm
Width:400 mm
Height:1.000 mm
P7sqjob2
Weight:50 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
Manufacturer: Bystronic
Type: ByStar 3015
Year of manufacture: 2008
Control: Bystronic
Laser: 4.400 W CO2
Working range: X: 3.000 mm
Y: 1.500 mm
Z: 170 mm
Special features: Cutting head 5 " + 7,5 "
X9i8vco
shuttle table
Cooling system
dedusting system
without Bysoft
condition: in use
ready for testing
Beam: 25.000 h
The plasma-gas cutter ECKERT JANTAR 2 was produced in 2007 and connected in 2008.
Technical data of the cutting machine:
- CNC control: ECS 859
- FastCAM computer program (Polish version) OEM Professional, with automatic arrangement of blanks on the sheet
- maximum thickness of gas cutting: 100 mm
- maximum cutting thickness of alloy steels: 25 mm
- maximum drilling diameter for St50: 6 mm
- KEMPER sectional extraction table, dimensions: 2000 x 6000 mm
- plasma torch support with an arc measure...
TIG hose package, welding torch, hand welding torch, TIG torch
-with torch body
-Length: 4 m
-Tuchel connector: 5-pin
Lidkj
-Water: cooled
-Weight: 1.5 kg
Machine type MIG/MAG welding machine
Make MERKLE
Type M 284 K
Supply voltage 3 x 400 Volt
Adjustment range 25 - 280 amps
Duty cycle 35 % ED at 280 amps
60 % ED at 210 amps
Current setting 14 switching steps
Cooling transformer by built-in fan
Cooling burner gas cooled
Design mobile compact unit
Wire feed gear 4 roller drive DV 25
fuse protection 16 ampere
Dimensions L x W x H 855 x 390 x 585 mm
Weight 85 kg
Special accessories Point and interval device
Age approx. 20 years
Yokpg
Condition works...
diameter / mm
plate thickness / mm
current capacity // kVA
Jwsgae
M 551 DW
25A / 15V - 560A / 42V
LxBxH: 90x50x115 cm
Length:500 mm
Width:200 mm
Height:200 mm
Weight:25 kg
Btnxsyzmjv
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
Plasma cutting system / power source
Manufacturer: Kjellberg
Type: PA-S75 CNC
Gva2mc
Year of manufacture: 1994
Cutting current: 40 - 130 A
Quality cut: 35 mm
Separating cut: 45 mm
Gas console: PV-S75W-1
without hose package
....
Laser welder TRUMPF HAAS-LASER HL 124P/4 LCB built in 1997 by the HAAS-LASER Schramberg brand (now TRUMPF) in Germany.
Technical specifications :
- control: LCB
- maximum output power: 150 W
- laser power: 150 W
- maximum pulse power: 5 kW
- pulse energy: 0.1-50 J
- pulse duration: 0.3-20 ms
- optical fiber: 400 μm
The TRUMPF HL 124P/4 LCB laser allows following treatments:
- welding tools, injection molds, inserts, punches, sliders, sleeves, etc.
- welding bathroom accessories
- welding surgi...
Plasma hose package
7cidj00n
-Hose package: air-cooled
-Euro central connection (see picture)
-Length: 5.5 m
-Weight: 4 kg
table length 590 mm
table width 590 mm
table load 200 Kg
table turning speeds 0,23 - 2,3 U/min
Benypo8w7c
table height 650 mm
total power requirement 0,55 kW
weight of the machine ca. 600 Kg
length 1500 mm
height 2550 mm
Control Amada
Thickness V2A 2 mm
Steel sheet steel 2,3 mm
sheet width - max. 700 mm
total power requirement 15 kVA
weight of the machine ca. 1,3 t
Cbtwfvif
dimensions of the machine ca. 2x1x3 m
Length:4.000 mm
Width:1.401 mm
Height:2.000 mm
Btnxqc8zvm
Weight:400 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
CNC Portal cutting machine
Manufacturer: Zinser
0ghur9ev
Type: 2005
Year of construction: 1992
CNC Control: CNC 920
2 oxyfuel torche
Working area: 1.700 x 7.000 mm
Track length: 9.000 mm
..
Spare parts for used Müller Opladen pipe cutting machines. The individual spare parts can be seen in the pictures. It is only possible to buy all control cards in one package.
Be02phrj89
TIG hose package, welding torch, hand welding torch, TIG torch
-with torch body
-Length: 4 m
-Tuchel connector: 3-pin
Ql0yfykcp
-Water: chilled
-Number: 2x hose packages available
-Price: per piece
-Weight: 2.4 kg
table diameter 400 mm
table load waagerecht 200 Kg
table load senkrecht 100 Kg
Benyqcbcfe
table turning speeds 0,2- 2 U/min
voltage 230 V / 50 Hz
total power requirement 0,55 kW
weight of the machine ca. 65 KG
dimensions of the machine ca. 0,65 x 0,5 x 1,0 m
unused stock machine
manual tilt adjustment
Start-Stop by foot switch
with CE
current intensivity 400 A
open-circuit voltage 65-75 V
IP protection class IP21
Permissible load
at 35% duty cycle 400 A
at 60% duty cycle 315 A
at 100% duty cycle 250 A
Idle power 0.49 kW
Application class: S
Hdqlky2
- Water cooled
- With hand and foot remote control
- Incl. Hose package approx. 6000 mm
Length:4.000 mm
Width:1.401 mm
Height:2.000 mm
Blxc2v7g
Weight:400 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
Technical specifications:
Work plate: 12000 x 3000 mm
Steel cutting: 40 mm
Working angle: 45°
Plasma Source: Hypertherm HPR260
More info:
Plasma rotary head machine for bevel cutting up to a maximum of 45 °.
Donaldson DFPRO 12 CY Suction Unit
Notes:
Availability from august
Logistic cost - Approx. €12.000,00
Btgib7ivz8
MIG/MAG hose package
-Length: 4 m
-Messer Griesheim connector
Vqlswa
-With suction
-Water: cooled
-Weight: 5.5 kg
incl. welding torch,pressure reducer,earth line
2 stroke,4 stroke,spot and interval operation
Currentless wire threading
Gas pre-flow adjustable 0-3,0 s
Gas post-flow time adjustable 0-4.0 s
Interval welding time adjustable 0.2 - 4.0 s
Interval pause time adjustable 0.1 - 0.8 s
Puncturing time adjustable 0.2 - 4.0 s
Wire creep adjustable 1.5m/min -100% vD
Free band time adjustable 0 - 0,4 s
Temperature controlled fan
Overcurrent protection
Overtemperature display
Gas test button
The Vario Stars ...
Machine type MIG/MAG welding machine
Make Werner
type KSG 320
Supply voltage 3 x 400 Volt
Adjustment range 15 - 320 amps
Duty cycle 80 % ED at 320 amps
100 % ED at 260 amps
Current setting 25 switching steps
Cooling transformer by built-in fan
Cooling burner water cooled
Design mobile compact unit
wire feed gear 2-roller drive
fuse protection 16 ampere
Dimensions L x W x H 1.160 x 380 x 700 mm
Weight approx. 150 kg
Age approx. 30 years
Condition workshop tested, good, incl. UVV test report
Scop...
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Photo gallery: the 10 strongest forklift trucks in the world
Morlock Motors official partner of Machineseeker and Truckscout24
Sell now on Machineseeker! Over 220,000 inquiries per month
10 valuable tricks for buying used machines online
Sample sales contract for used machines in nine languages
