Used Notching machines with fixed angle over 4mm for sale (16)

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 93.0 kg. The AL1-2U electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continually work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2U pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). This pipe notcher is also suitable for notching a zinc outlet in round and rectangular metal pipes. You can notch pipe outer diameters of ø 20.0 -60.3. Bwohx D Not Ukrweg Eol Do you often notch pipes? Then the electrically driven pipe notcher AL1-2U with the 2.2 kW electric motor is just the thing for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electro-motor pipe notching machine - including notching station for zinc run-out notches - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: used, Year of construction: 2003, sheet thickness: 6messurements (LxWxH): 900 x 900 x 1150weight approx.: 850 Bjhjv Ncn Rsx D Ng Ejwl

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, sheet thickness (max.): 6 mm, cutting length (max.): 220 mm, cutting force: 250 t, No reserve price - guaranteed sale to the highest bidder! Bwehx D Njwf It Aeg Ejl TECHNICAL DETAILS Sheet thickness: 6 mm Pressure: 250 t Blade length: 220 mm Stroke length: 24 - 26 mm Ram stroke: max. 32 mm MACHINE DETAILS Machine weight: 1,600 kg

Condition: used, Year of construction: 2006, Empty weight: 1.500 kg Cutting width: 220mm Max. thickness: 6mm Variable Angle! - Year: 2006 - Documentation available: No - CE mark available: Yes - Serial number: 600521530 - Control: Conventional - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bwehx D Ngswcyt Ns Eel Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 1986, plate thickness 6,0 mm Bjhx D Njg Ip Efjg Eewl pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable

Condition: good (used), Hydraulic Notching Machine (used) Manufacturer: Apollo Type: TF 230 Blade length: 230 mm x 230 mm Cutting capacity: 6 mm mild steel Cutting capacity: 4 mm stainless steel Strokes per minute: 95 Table size: 1000 x 710 mm Cutting angle: 90 degrees Bwshx D Nswb Scyjg Esl Drive power: 4.4 kW Weight: approx. 1000 kg Space requirement: L 1100 mm, W 1000 mm, H 1500 mm 2 angle stops Foot switch Operating manual The machine is in very good condition and ready for immediate use. Forklift available, free on truck Favourable shipping available Machine location: 59510 Lippetal

Condition: used, Technical details: total power requirement: 2,2 kW table-size: 500 x 780 mm working area: 250 x 250 mm height over floor: 940 mm voltage: 380 V / Hz Weight approx.: 0,642 t dimension machine xH: 1,0 x 1,3 x 1,2 m HYDRAULIC NOTCHING MACHINE On the table there are left and right 90° linear scales length 250mm stop bars length 400mm; angle adjustable left/right 90°) Bwohx D Nju Icq Tsg Eel operated by switch button and/or hand/foot control incl. tool 2x upper and lower knives built in (knife length 250mm) *

Condition: as good as new (ex-display), Year of construction: 2024, Demonstration machine. Like new. The machine is fully equipped with: - large, comfortable table - Inside fence with adjustment scale and quick adjustment for cutting strips. - 4 locking precision stops with sliding and interchangeable stop bars 500 mm long. - 2 left and 2 right T-slots parallel to the blades - Plexiglass protection for clear notching - Lift release with freely movable foot pedal - Three stroke types: set-up stroke, single stroke and continuous stroke - 1 front cross stop system consisting of T-slot and scale - 1 left and 1 right scale, parallel to the knives - 1 left and 1 right guide rail for notching magnification over 225 mm - 2 hold-down devices Two stations: Station 1 Disengage: cutting capacity: - 225 x 225 x 6mm in ST 45 - 225 x 225 x 4mm in stainless steel Station 2 punching with trump tool and/or cutting in Bwohx D Ngsfhw N Io Eel thirty degrees max 4mm St45 max 3mm stainless steel Throat: max. 100mm

Condition: as good as new (ex-display), Year of construction: 2024, Boschert Notching Machine LB13 Punching Type LB13 Punching/Trunk Cutting capacity 6 mm St40/ 4 mm V2A Inner stop for cutting strips. Station 2 punching with Trumpf tool system Punching diameter max 76 mm Bohx Dehp N Rys Ng Eewl throat 150 mm Punching force approx 15 tons with active stripper system Prefeeding machine year 2022

Condition: used, Year of construction: 1998, Notching machine, notcher Manufacturer: FIM Cutting-width: 200mm Max. thickness: 6mm Variable Angle-Adjustment Motor-power: 4kW Bwshx D Ngjv Umdgj Ejl Machine-dimensions: 1200x1250x1300mm Machine-weight: 1200kg - Year: 1998 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, plate thickness 4 mm Cutting thickness max. At (60 kg / mm²) 3 mm blade length 90 mm weight ca. 30 kg dimensions of the machine ca. 0,45 x 0,30 x 0,2 m Notching unit for installation under a hydraulic or eccentric press. The cutting thicknesses are estimated to be low. Bohxju I Et Re D Ng Eowl Machine dealer with own stock of 1600 m².

Condition: new, - Capacity 250 x 8 mm - Hydraulic - Foot control - Central lubrication system - Emergency stop Bwjhx D Nsnwlptog Esl - Documentation - 400V

Condition: good (used), Year of construction: 1992, Offer 24592 Technical data - for notching gas, steam, stainless steel, non-ferrous metal, etc. pipes in order to weld them together at a - 90° angle. Also for double corner connections. - Pipe notches for Ø 27.9 - 34.8 - 42.8 mm - Ø 49.0 - 61.0 mm - Zinc outlet notches Ø 27.0 - 61.0 mm - Max. pipe wall thickness at 400N/mm² strength 5 mm - Drive 400 V / 2.2 kW Bwohxovprr Eo D Ng Ejl - Space requirement approx. W 1100 x H 1200 x D 650 mm - Weight approx. 200 kg

Condition: new, messurements (LxWxH): 0,80 x 0,85 x 1,20weight approx.: 0,610total power requirements: 4sheet thickness: 6 Bwehx D Ngjd Ab Icj Eol

Year of construction: 2023, Condition: as good as new (ex-display), Notching machine Boschert LB12/6 Machine colour blue Ral 5017 Cutting angle 90 Cutting capacity 6 mm St42 4 mm stainless steel Connected load 4kW Weight 800 kg Machine equipped with 2 stops with movable stop bar 300 mm inner stop for cutting strips up to 225 mm 2 movable hold downs plexi protection Bwohjb Raddox D Ng Eol CE and new machine guarantee

Condition: used, Angle cutter, Angle machine, Angle shears Manufacturer: FIM Type: Goal 200/6, Goal 206 Year of construction: 2000 Cutting width: 200mm Max. thickness: 6mm Fixed angle: 90gr Engine power: 4kW Machine-afmetingen: 1200x1250x1300mm Machine weight: 1200kg - Documentation available: No Financial information VAT: The price shown is exclusive of VAT Bshov Dlu Nsx D Ng Ejwl VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren