Used hydraulic guillotine shears for 8-9mm plate thickness for sale (37)

Condition: used, Year of construction: 1993, Guillotine Shear Iisdpfey Atn Hox Akxja Manufacturer: LVD Model: MVSB 62/8 Year of manufacture: 1993 Max. working length: 6,200 mm Sheet thickness: 8 mm Weight approx.: 13,000 kg ä16426

Condition: used, Year of construction: 1989, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Ijdoru Un Hspfx Akxoia Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller model: E21S, stroke rate (max.): 12 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, table height: 800 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 7,300 kg, total length: 3,850 mm, total width: 2,345 mm, total height: 1,620 mm, warranty duration: 12 months, Equipment: documentation/manual, type plate available, HYDRAULIC GUILLOTINE SHEAR 8 × 3200 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Maximum sheet thickness: 8 mm Maximum cutting length: 3200 mm Blade rake angle: 1° 30′ Number of strokes per minute: 12 Back gauge travel: 600 mm (standard) Distance between side frames: 3450 mm Blade length: 3300 mm Table height: 800 mm Motor power: 11 kW Weight: 7300 kg Machine dimensions (L × W × H): 3850 × 2345 × 1620 mm Equipment: Motorized back gauge Ball guide for the back gauge Hydraulic sheet hold-downs along the entire cutting length Segmented blades with the possibility to replace only the damaged segment Blade gap adjustment Ball transfer units on the table for sheet support Front support arms Front gauge with measuring scale Rear safety guard Front safety guard Foot pedal E21S controller Illuminated cutting line Delivery conditions: The machine is brand new 12-month warranty Ijdpfx Ajyt E U Eskxjia Warranty service Post-warranty service CE declaration of conformity Operation and maintenance manual in English Delivery to the customer is possible. Transport costs are calculated individually by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: used, Year of construction: 1998, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear Iiodpfx Aoyq Szmjkxea - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions

Condition: good (used), Year of construction: 1993, Used Darley guillotine shear Type VS 6008 Capacity 6050 x 8 mm Iisdjyzf Snopfx Akxoa Machine fully operational, frame needs to be welded (see last photo)

Condition: good (used), functionality: fully functional, Year of construction: 2003, operating hours: 972 h, working width: 3,060 mm, stroke rate (min.): 12 1/min, sheet thickness (max.): 8 mm, power: 18.5 kW (25.15 HP), overall weight: 6,250 kg, Equipment: documentation/manual, type plate available, Hydraulic shear Baykal HGL 3100x8 in good condition Iodpfex Dy Tiex Akxsia Now available, free loading onto truck

Condition: used, Year of construction: 1989, sheet thickness: 8driving power: 18,5weight approx.: 5800messurements (LxWxH): 2130 x 3260 x 2360sheet length: 1550Technical Data: Max. cutting length: 1,550 mm Throat depth (side clearance in frame): 50 mm Sheet passage: 16 mm Cutting angle adjustable: 0.5° – 2°30′ Strokes per minute: 25 – 32 Number of hold-downs: 8 Cutting pressure: 280 bar Oil capacity: 300 liters Total connected load: 20.1 kW Overall dimensions (L × W × H): 2,130 × 3,260 × 2,360 mm Equipment: CNC control SIEMENS S5 for numerical sheet metal backgauge control Sheet support device with motorized scrap separator Sheet discharge with conveyor belt Blade clearance and cutting angle programmable via control Spare blades included Shear blades suitable for material up to 750 N/mm² tensile strength Separate hold-down operation for cutting along marked lines Hold-down pressure adjustable and readable from the front 2 swing-away backgauges Finger guard with handle recess Ball rollers integrated in the support table Angle gauge with vernier scale Foot switch Condition:Used, in good condition Iiedpfovaatlsx Akxsa

Condition: used, Year of construction: 1987, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Ijdpfx Akoyy Tqcoxsia Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: used, Year of construction: 2004, total length: 4,000 mm, total width: 2,200 mm, total height: 2,100 mm, Weight: 9.800 kg Price: On request - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: B8820 - Drive system: CNC - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized Isdpoyf Hpzefx Akxjia - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Transport dimensions: 4000mm x 2200mm x 2100mm (l x w x h) - Transport weight [kg]: 9800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1997, total length: 9,530 mm, total width: 2,750 mm, total height: 2,950 mm, Weight: 55.000 kg Price: On request Cutting bench, cutting shear Type: Hydraulic Manufacturer: Safan Type: HVR 850-8 Year: 1997 Overhauled: 2021 (also new blades) Controls: Conventional Electrical back-gauge Cutting width: 8500mm Max. thickness: 8mm Back gauge: 1000mm Motor power: 15 kW Incl. documentation Machine dimensions for transport: 9530x2750x2955mm + extra parts Machine as a 550mm Sword; you can also put this machine on blocks (see drawings). Machine weight: 55000kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: B 9329 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 8500 - Backgauge type: Electric - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized Iijdpfxswng Nbo Akxsa - Transport dimensions: 9530mm x 2750mm x 2955mm (l x w x h) - Transport weight [kg]: 55000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), working width: 2,550 mm, sheet thickness (max.): 8 mm, power: 15 kW (20.39 HP), Guillotine SAFAN - HT 255-8 MACH-ID 9237 Make: SAFAN Type: HT 255-8 Control: ARA TOUCHSCREEN Touchscreen backgauge Maximum sheet thickness: 8mm Max. cutting length: 2550mm Strokes on full length: 19mm Strokes in short 1000 length:40 Cutting angle: 0,5 - 2 Gr° Length backgauge: 0 - 1000mm Number of down holders: 17 Approach speed: 200mm/sec. Power: 15kW Length: 3400mm Width: 2300mm Iijdpoxdb Eysfx Akxsa Height: 2150mm Weight: 8900kg

Condition: excellent (used), Year of construction: 1999, AMADA MODEL GPN 840 HYDRAULIC SHEAR MAXIMUM CUTTING LENGTH 4000 mm MAXIMUM THICKNESS M.S. 45 kg/mm/2 8 mm MAXIMUM THICKNESS S.S. 60/kg/mm2 6 mm STROKES PER. MIN 10 - 35 BACK GAUGE RANGE 10 - 1000 mm MOTOR SIZE 15 KW MACHINE WEIGHT 10100 kg STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 1.5 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORT SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM Iiodpotrkmnefx Akxja CYCLE COUNTER AUTOMATIC SHEARING CONTACTS IN BACK GAUGE BLADE GAP AND RAKE ANGLE ADJUSTMENT FRONT FLIP STOPS ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE WORK CHUTE HOUR COUNTER AUTO-DIAGNOSTICS

Condition: used, Hydraulic guillotine shear, swing-beam plate shear BAYKAL Type HGL 3100 x 8 Machine No. 6882 Year of manufacture: 2003 Cutting length: 3100 mm Cutting thickness: 8 mm Backgauge: 5 mm to 1150 mm Left front angle gauge: 1000 mm Working height: 820 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 140 liters (HLP 46) Drive power: 18.5 kW Electrical connection: 400 Volt, 50 Hz - Motorized backgauge with ELGO positioning control Type P9521, with digital position display - Backgauge lift-out at 1185 mm - Single and continuous stroke modes - Left angle gauge 1000 mm - 2 material support arms, each 1000 mm Iedpfxsyvvkqo Akxsia - 17 hydraulic sheet hold-downs - Manual blade gap adjustment - Cutting line illumination - Electric foot switch with emergency stop, free-standing - Finger guard on left side, 1100 mm, foldable, electrically monitored - Safety guard with light barrier at the rear in the backgauge area - 3088 operating hours read off Space required (without sheet supports) L x W x H: 3900 x 2460 x 1660 mm Machine depth with sheet supports: 2930 mm Weight: 6.3 tons In good condition

Condition: used, functionality: fully functional, Year of construction: 1997, Hydraulic Guillotine Shear Make: HACO Model: HSLX 4008 Year of manufacture: 1997 Technical Specifications Manufacturer: HACO Model: HSLX 4008 Year: 1997 Sheet width: 4050 mm Sheet thickness: 8 mm Cutting angle: 0.5 – 3° Dimensions: approx. L 4.9 x W 2.0 (plus support arms) x H 2.2 m Isdpfxsyvgx Es Akxsia Machine weight: approx. 8 t Equipment • Automatic cutting angle adjustment • Automatic blade gap adjustment • Cutting line illumination • Support arms • Cutting length limiter • 1,000 mm backgauge • Angle stop • Circuit diagram All information provided without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, working width: 8,500 mm, sheet thickness (max.): 8 mm, back gauge: 1,000 mm, total length: 9,530 mm, Equipment: finger protection, The machine was overhauled in 2021! TECHNICAL DETAILS Cutting width: 8,500 mm Cutting thickness: 8 mm Rear stop: 1,000 mm MACHINE DETAILS Control: Conventional Motor power: 15 kW Dimensions & Weight Dimensions (L x W x H): 9,530 x 2,750 x 2,950 mm Machine weight: 55,000 kg Iodpeyuaiasfx Akxeia EQUIPMENT Electric backgauge Finger guard: Fixed Angle adjustment: Motorized Cutting gap adjustment: Motorized Documentation CE marking

Condition: excellent (used), Year of construction: 2007, Technical specifications: Max. cutting width: 4050 mm Max. cutting capacity for steel (ST40): 8.0 mm Max. cutting capacity for stainless steel: 6.0 mm Max. cutting capacity for aluminium: 8.0 mm Motorized adjustable backgauge: 1000 mm Cutting gap adjustment Ijdpfx Aksywd Ndsxoia Cutting angle adjustment: 2.2° Sheet support device Motor power: 15 kW Dimensions (L x W x H): approx. 4800 x 2200 x 2150 mm Weight: approx. 11.5 tons The seller is not liable for typographical or data transmission errors. The machine is in condition, technically and visually, corresponding to its age; used machines are sold without any warranty.

Condition: not inspected (used), Hydraulic guillotine shear Iijdpfx Akeyv Dmyoxea Cutting length: 3150 mm for steel ST 37 up to 8 mm thickness

Condition: good (used), Year of construction: 2008, Cutting length: 3060 mm Iiedpfxoyvt Tco Akxea max. cutting capacity: 8 mm up to 14 strokes per minute manual blade gap adjustment backgauge: 750 mm support arms with scale motor power: 15 kW

Condition: good (used), functionality: fully functional, Sheet width: 4050 mm Sheet thickness: 8 mm Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Isdpfx Akexu Nc Iexeia Table length: 710 mm Machine weight approx.: 10,100 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: C070024, control type: CNC control, actuation type: hydraulic, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, back gauge: 1,000 mm, Equipment: type plate available, AMADA Model GX 11 840 8 mm x 4050 HYDRAULIC Year of manufacture: 2007 Programmable CNC shear Steel thickness: 8 mm Stainless steel thickness: 6 mm Aluminum thickness: 10 mm Cutting length: 4050 mm Motorized backgauge: 1000 mm Pneumatic sheet support Side gauge: 1.5 m Serial number: C070024 Hydraulic hold-down Automatic blade gap adjustment Automatic variable cutting angle adjustment Shadow line indicator – standard Central lubrication – standard Stroke counter – standard Adjustable stroke Motor: 16 kW Isdpfoyvhnbjx Akxoia Weight: 11,530 kg Spare blades

Condition: excellent (used), working width: 3,000 mm, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, cutting length (max.): 3,100 mm, table length: 3,000 mm, Used Very Clean Hydraulic Industrial Sheet Metal shear / Guillotine Edwards Pearson VE shear 3metre x 10mm in excellent used condition For Sale Capacity 3070mm x 10mm. Squaring Arms and Work Supports. Front operated Powered Back Gauge Serviced with Bystronic UK Complete with: Swissax 2000 control with automatic backstop blade gap adjustment and rake adjustment Iijdpfxouv Hpis Akxea

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic guillotine shears SMO-3106-N Cybelec CybTouch 8 Specifications - Maximum cutting thickness (S235): up to 6.0 mm - Maximum cutting length: 3200 mm - Blade inclination angle: 1.5° - Strokes per minute: 14 - Backgauge travel distance: 600 mm - Motor power output: 7.5 kW - Length: 3900 mm - Width: 1600 mm - Height: 1740 mm - Weight: 5200.0 kg Equipment and features - Backgauge equipped with ball screws and driven by the electric motor - Hydraulic hold-downs to clamp the sheet over the entire cut length. - Blade clearance adjustment - Ball transfer units on the worktable - Work lighting - Front supports - Mobile foot switch Rear chute The rear chute is equipped with ball transfer units to slide smoothly away from the shear after cutting. CybTouch 8w control (Mounted on a swivel arm on the left-hand side of the machine.) - Parameter setting based on material specifications - Automatic clearance setting - Automatic correction for backgauge positioning - Backgauge retract movement to avoid bending of material - Supports that cover ⅔ of the standard size material Iiedpsvhclmofx Akxoa - Support for RTS - the handover of the cut material to the user - Support for the motorized backgauge - Docking position - Hold-down pressure on sheet management - Hydraulic pressure management - Saving long cut sequences and programming in live colors - Clear page layout with large buttons on the easy-to-read screen that displays all the data an operator needs. - Very intuitive and operator-friendly user-interface - Few-second programming a part sequence - Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials The remaining time can be checked in the Otinus Customer Panel.

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 8x4000 SMO-4008-N Specifications - Maximum thickness mild steel (PN-EN S235): up to 8.0 mm - Maximum working length: 4000 mm - Cutting angle: 1.5° - Strokes/minute: 8 - Backgauge retract distance: 600 mm - Motor power: 11.0 kW - Length: 4800 mm - Width: 1800 mm - Height: 1950 mm - Total mass: 7300.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. Ijdpfxeiuzupe Akxjia - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 8x3200 SMO-3208-N Ijdpfjh Rah Uex Akxoia Specifications - Maximum thickness mild steel (PN-EN S235): up to 8.0 mm - Maximum working length: 3200 mm - Cutting angle: 1.5° - Strokes/minute: 10 - 15 - Backgauge retract distance: 600 mm - Motor power: 11.0 kW - Length: 4300 mm - Width: 2000 mm - Height: 2100 mm - Total mass: 6400.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic guillotine shears SMO-3204-N QC12Y 4x3200 Specifications - Maximum cutting thickness (S235): up to 4.0 mm Ijdpovvuitefx Akxsia - Maximum cutting length: 3200 mm - Blade inclination angle: 1.5° - Strokes per minute: 8 - 12 - Backgauge travel distance: 600 mm - Motor power output: 5.5 kW - Length: 3950 mm - Width: 1670 mm - Height: 1800 mm - Weight: 4200.0 kg Equipment and features - Backgauge equipped with ball screws and driven by the electric motor - Hydraulic hold-downs to clamp the sheet over the entire cut length. - Blade clearance adjustment - Ball transfer units on the worktable - Work lighting - Front supports - Mobile foot switch Rear chute The rear chute is equipped with ball transfer units to slide smoothly away from the shear after cutting. E21S control (Mounted on a swivel arm on the left-hand side of the machine.) - Motorized backgauge - Capable of storing 40 programs, with up to 25 different steps each. - Retract function - Single-click parameter saving - Parameter memory in the event of power failure Top quality components - Rexroth hydraulic valve - Siemens-licensed main motor - Schneider electrical components Steel hydraulic line tubings Hydraulic lines made of steel instead of rubber reduce the risk of future leaks. Ergonomics The operator can work freely throughout the machine's working area thanks to the mobile foot switch and the controller on the swivel arm. Additional LED lighting and laser indicator ensure a comfortable view of the workpieces in any situation. Safety We attach great importance to the safety of our Clients, therefore we equip our shears with visible safety labels, rear light curtains and easily accessible safety switches. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Oil cooling system The Oil Cooling System guarantees the stability of the machine's performance even after long, continuous operation. Pressure Control System PCS ensures blade reliability for years to come. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, every machine purchase includes a specialist support package with hours of expert guidance. Within the service, our technicians may: - Specify the bending steps for intricate parts. - Advise on material and gas selection - Assist in the selection of operating parameters for different materials The remaining time can be checked in the Otinus Customer Panel.