Used Sheet Metal Work for sale (52,482)

Condition: excellent (used), Year of construction: 2007, Control Ermak ER70 CNC weight 11000 kg pressure power 200 Hodeycxkxopfx Ahvji engine output 15 kW voltage 380 V length 3100 mm height of the machine 2850 m 4550

Condition: new, Fully automatic roof tile machines with metal presses in tile appearance in desired sizes; Please contact us for additional information and technical documents. Hedpfjf Nqi Isx Ahvei

Condition: excellent (used), Year of construction: 2002, RAS Multibend Center 79.22 Automatic cnc FOLDER / Panel bender Year 2002 Specifications • Working Length: 2160 mm/ 7.09’ ft. Hodpfx Ahsrxt Axsvji • Maximum Sheet Metal Thickness: Steel – (400N/mm2) 2.0 mm • Maximum Sheet Metal Thickness: Stainless Steel – 1.5 mm • Maximum Sheet Metal Thickness: Aluminum – 3.0 mm • Maximum Development Sheet Width: 1500 mm/ 4.92’ ft. • Maximum Four-Sided Fold Height Max: 203 mm • Bending Blade Reach: 180 ° Degrees • Machine Width: 5500 mm approx./ 18.04’ ft. approx. • Machine Length: 7000 mm approx. / 22.97’ ft. approx. • Machine Height: 2500 mm/ 8.20’ ft. Power: 18 kW Frequency: 50hZ Pressure: 6 Bar Weight: 21,000 kg/ 46,297 lbs. approx.

Condition: excellent (used), Year of construction: 2002, RAS Multibend-Center RAS 79.26 Year 2002 Used RAS Multibend Centre CNC Folder Max working 2560mm Max sheet thickness (mild steel) 2.0 (2.5mm) Max sheet thickness (stainless steel) 1.5mm Max sheet thickness (aluminium) 3mm Finished part length min. (w/o corner tools) 200/250mm Hedjrxt Hqspfx Ahvoi Finished part length (w. small corners) 380/430mm Finished part length min (w. large corners) 430mm / 480mm Finished part width min. (inside) 150 (140mm) Finished four sided part height max 203mm Side free space corner tools (small/large) 30/ 50mm Folding beam travel range 180 Deg Working height 1000mm Machine width 7700mm Machine length 5800mm Machine max height 2400mm Weight approx 17000kg Drive power 25kw

Condition: excellent (used), Year of construction: 2001, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, working width: 1,850 mm, working range: 1,850 mm, 1 Used Salvagnini cnc automatic panel bender for sale cnc folder P4.1812 Servo-controlled panel bender LS Upper bending blade Hsdpfx Aswb E Uvshvoi LI Lower Bending blade MLA.ZR Manual length Adjustment of Blankholder CLA Long Tab Bending Unit HP12015 R81 Chiller Max. length at entrance: 1850mm. Max. width at entrance: 1500mm. Minimum length at entrance: 285mm. Minimum width at entrance: 190mm. Maximum diagonal: 2150mm. Maximum width at exit: 1500mm. Maximum reference dimension: 2000mm. Minimum sheet thickness: S min: 0,50mm. Maximum sheet thickness, Mild Steel (max. 410 N/mm2): Max: 2,00mm Maximum sheet thickness, Stainless steel (max. 600 N/mm2): Max. = 1.25mm Processing of pre-painted material Smax= 3,00mm. Maximum tool length for CLA option: 1000mm.

Condition: new, material width 1015 mm material thickness 1 mm speed von Hand weight 240 Kg Hodpfxsupxdkj Ahvoi dimensions 1420 x 600 x 750 m

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, compact cylinder -Manufacturer: Metal Work, compact cylinder tray sealing machine Inauen VC999/ TS 1200 N -Type: 121AA20160ZP -Stroke: 160mm Hedom Hd Rzspfx Ahvji -Piston: Ø 120 mm -Piston rod: Ø 32 mm / M27 x 2 -Dimensions: 445/135/H135 mm -Weight: 9.6kg

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal Hodpfx Aowz Ukyshvsi

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 153200 € 2895.48 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm 6 bar 4200 mm 2300 mm 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT Hsdpfx Ajynmw Rjhvoi * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th...

Condition: new, neu ca. 12 - 14 Wochen ab Auf Italien 74000 € 1398.6 € 1350 mm 0,5 - 170 mm 1370 x 2200 mm 4000 m³/h 200 mm 6 bar 78 (+/-2) dB 1750 mm 2100 mm Hjdpfx Aoynmwkjhvji 2180 mm 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 180 Hardness of the rubber wheels Shore 55 Stroke of the contact roller adjustment up-down "Grain adjustment mm 8 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Positioning speed of the contact roller adjustment m/s 10 Grinding belt speed m/s 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 10rotating clockwise and 10counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 20 Oscillation stroke mm 15 Rotation motor power kW 5,5 Revs 1/min 300 - 1000 Oscillation motor power kW 0,37 Grinding brush speed m/s 10,0 ACCESSORIES: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5.580,00 with Wire Brush 0,3 mm € 5.900,00 R GROUP - GRINDING BELT Motor 15 kW € 1.060,00 OPTIONS: Return to Sender System (Grinding part is discharged to the front again) € 1.290,00 Conveyor belt with vacuum system - 3,0 kW - 300 mm wide € 4.780,00 2 additional PVC coated rollers on infeed and outfeed side € 2.040,00 Tampico Brush System for parts cleaning 0,55kW Ø 150 mm € 4.510,00 Tampico Brush system for conveyor belt cleaning Ø 150 mm € 4.030,00 magnetic conveying system - 2 groups, 200 x 200 mm € 13.520,00 Demagnetiser € 4.940,00 THE MACHINE MUST BE USED WITH AN EXTRACTION DEVICE. WE RECOMMEND AN EXTRACTION SYSTEM WITH 4,000 M³/H.

Condition: used, Year of construction: 2012, operating hours: 8,600 h, functionality: fully functional, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness copper (max.): 5 mm, For sale: Combined sheet metal and tube laser cutter BLM ADIGE-SYS LT COMBO. This machine is designed for both sheet, tube, and profile cutting in a single system – an ideal solution for versatile and flexible production. The machine is connected and fully operational; it can be inspected and observed working in real time. Single owner. Full service history available, the machine has been regularly maintained with annual servicing. Manufacturer: BLM Group Model: ADIGE-SYS LT COMBO Year of manufacture: 2012 Technology: Fiber laser Source: 3 kW LT Combo Tube and profile cutting diameter: 16 – 225 mm Tube input length: 6.1 m; output length: 6.1 m Cuts to zero – leaves no remnants Sheet table: 1500 x 3000 mm Hodpfx Ajyaavdohvoi Cutting capacity: ALU 10 mm; Stainless Steel 12 mm; Brass 5 mm; Steel 20 mm Laser cutting hours: 8,600 h (as of 2026-02-27) Total machine hours: 72,000 h (as of 2026-02-27) Other: spare laser cutting head included If you have any further questions, we would be happy to assist you.

Condition: excellent (used), Year of construction: 2000, Programmable and automatic machine for the production of sheet metal panels by forming multiple bends on all four sides. Hsdpjw A Nnpsfx Ahvsi

Condition: used, Year of construction: 2010, Schroder manual folding machine. The machine is very robust, fully operational, and the blades are in good condition. Testing is possible. Completely repainted in original colors. Specification: Manufacturer: Schroder Hedpjymnhbofx Ahvsi Model: Ak 2500/1.0 Year of manufacture: 2010 Working length: 2500 mm Bending thickness: 1.0 mm Other: Repainted. Pneumatic clamping. No back gauge. If you have further questions, we will be happy to assist you.

Condition: not inspected (used), Year of construction: 2008, operating hours: 32,164 h, functionality: unexamined, machine/vehicle number: 3201250, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, workpiece length (max.): 2,695 mm, workpiece width (max.): 1,524 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item between 23/03/2026 and 27/03/2026! The machine is also equipped with a cutting function (see pictures)! TECHNICAL DETAILS Maximum tensile strength stainless steel: 600 N/mm² Sheet thickness stainless steel: 0.5 mm – 1.25 mm Typical sheet thickness stainless steel: 1.0 mm Maximum tensile strength steel: 410 N/mm² Sheet thickness steel: 0.5 mm – 2.0 mm Typical sheet thickness steel: 1.5 mm Maximum tensile strength aluminium: 265 N/mm² Sheet thickness aluminium: 0.5 mm – 3.0 mm Hsdoycqucopfx Ahvoi Typical sheet thickness aluminium: 1.5 mm Sheet dimensions Length: 405 mm – 2,695 mm Width: 190 mm – 1,524 mm Maximum diagonal: 2,800 mm Maximum centering dimension: 2,500 mm MACHINE DETAILS Hydraulic System Base machine oil capacity: approx. 500 dm³ Shear lift table oil capacity: approx. 20 dm³ Cooling System (Closed) Cooling unit R81: approx. 175 liters Cooling unit R101: approx. 260 liters Service Connections Mains voltage: 400 V Frequency: 50/60 Hz Connection cross-section: 4 × 25 mm² Pre-fuse: 80 A Average current: 42 A Power consumption: 24 kW Control voltage: 24 V AC/DC Industrial PC / Monitor / Power supply units: 220 V AC Open Cooling System Cooling water requirement: approx. 2.0 m³/h Max. inlet temperature: 20 °C Compressed Air Required pressure: 6 – 12 bar Max. air consumption at 6 bar: approx. 2,275 Nl/min Dimensions & Weight Required space (L × W × H): approx. 18,000 × 11,500 × 3,500 mm Transport width: Up to approx. 3,000 mm Total weight (without oil): approx. 27,760 kg Heaviest component (bending machine): approx. 20,040 kg Operating hours: 32,164 h Robot Manufacturer: KUKA Model: KR 150 L110-2 2000 Year of manufacture: 2008 Weight: 1,285 kg Note: Robot has been modified for use with a magnetic lifter SCOPE OF DELIVERY Available manuals Various spare parts in wooden crates

Condition: ready for operation (used), functionality: fully functional, Sheet straightening machine, 2100 mm,Sheet Metal Straightening, Plate Leveler Machine 2100 mm Hsdpfov Tpv Njx Ahvji Used machine Maximum Sheet Width: 2100 mm (2100x8 mm) Maximum Sheet Thickness: 10 mm (1500x10 mm) Number of Rolls: 11 pcs Roll Diameter: 95 mm Electric Motor: Adjustable speed and direction Electrical Data: 400 V, 50 Hz, 36 A, 22.5 kW Includes a roller conveyor.

Condition: new, Year of construction: 2025, -TFON Lite SURFACER® Series. The TFON Lite SURFACER® Series enables simultaneous processing of multiple parts, offering unmatched versatility through a range of consumable options and an efficient vacuum table system. Designed for ease of use, it features quick brush changes and the capability to mount two different brushes tailored to your specific applications -With brushes mounted parallel to the table, the system guarantees flawless grinding performance with every use. Ergonomically engineered, the motor weight is supported by the machine frame itself, significantly reducing operator fatigue and improving workplace safety -Backed by TFON’s trusted guarantee, the SURFACER® Series strikes the perfect balance between minimizing operational costs and maximizing finish quality Key Specifications: -Minimum Material Size: 80 × 80 mm. Material Thickness: 3 – 200 mm. Hodpfx Ahsqzxhyovsi Maximum Material Width: 800 mm. Maximum Material Length: 500 mm.

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine -The TFON Leveltech® is a robust and precise leveling machine designed to handle a wide range of material thicknesses with efficiency and ease. Engineered for reliability and performance, it ensures flat, smooth surfaces on metal sheets and strips to meet stringent quality standards. Key Specifications: -Material Thickness: 1 mm – 30 mm -Maximum Material Width: 1,600 mm Hjdpjkyrphsfx Ahvoi -Minimum Material Length: 145 mm -Quick Change System for Straightening Rollers: Standard -Flattening Gap Adjustment: Servo Hydraulic with PLC Control. -Machine Dimensions (L × W × H): 5,465 × 6,735 × 2,300 mm. -Total Weight: 40.000 kg

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine Series. -Model: L-9060. -Material Thickness: 1.0 mm – 30.0 mm. -Maximum Material Width: 600 mm -Minimum Material Length: 145 mm. -Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 26.000 kg. Machine Dimensions (L × W × H): 4,400 × 7,185 × 2,260 mm Model: L-9011 Material Thickness: 1.0 mm – 30.0 mm. Maximum Material Width: 1,100 mm. Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 31.000 kg Machine Dimensions (L × W × H): 4,600 × 7,185 × 2,260 mm Model: L-9013 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,300 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 35,000 kg Machine Dimensions (L × W × H): 5,000 × 7,185 × 2,260 mm Model: L-9016 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,500 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Weight: 40.000 kg Machine Dimensions (L × W × H): 5,200 × 7,185 × 2,260 mm Model: L-9020 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 2,000 mm Hjdpshwb U Tefx Ahvoi Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Dimensions (L × W × H): 5,700 × 7,185 × 2,260 mm.

Condition: new, Year of construction: 2025, *TFON Leveltech® Leveling Machine Series. Hsdpfjhwb Uwsx Ahvsi -Models: M-5560, M-5511, M-5513, M-5516. -Engineered for precise leveling of materials with a thickness range from 1.0 mm to 15.0 mm, these models offer flexibility in material width and advanced control features for optimal performance. -Material Thickness: 1.0 mm – 15.0 mm -Maximum Material Width: M-5560: 600 mm. M-5511: 1.100 mm. M-5513: 1,300 mm. M-5516: 1,500 mm. Minimum Material Length: 110 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Machine Weight: M-5560: 12.000 kg M-5511: 15.000 kg M-5513: 18,000 kg M-5516: 19.000 kg Machine Dimensions (L × W × H): M-5560: 2,800 × 2,905 × 1,950 mm M-5511: 3,300 × 2,905 × 1,950 mm M-5513: 3,500 × 2,905 × 1,950 mm M-5516: 3,700 × 2,905 × 1,950 mm

Condition: new, Year of construction: 2025, working width: 1,300 mm, bending angle (max.): 135 °, sheet thickness aluminum (max.): 1 mm, total width: 1,900 mm, total height: 1,900 mm, warranty duration: 12 months, insertion depth: 1,250 mm, opening width: 105 mm, Equipment: documentation/manual, DINAMIC LINE Ltd. has been manufacturing machinery since 1994. All machines are certified, CE marked, and accompanied by a Declaration of Conformity. Our products are exported across the globe: Italy, Austria, Germany, Switzerland, Spain, Belgium, Turkey, Slovenia, Croatia, Bulgaria, Romania, Moldova, Hungary, Slovakia, Lithuania, Albania, Poland, Bosnia, Montenegro, Kosovo, North Macedonia, Australia, New Zealand, North America, Africa, Russia, Thailand, Malaysia, Tasmania, etc. By agreement with the customer, delivery can be organized under CPT (Carriage Paid To) terms to the customer’s premises. Assembly is not required - ready to use immediately. Quick delivery time Specifications: Working length: From 2 meters to 9 meters Hedpjgmhxajfx Ahvei Working width: 1300mm Space requirements: 8800 x 1900 x 1800 Metal sheet bending thickness: 0.8mm / Al - 1.00mm Bending angle: 135° Machine weight: 3500kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 15mm or 20mm Foot switches: for 2 operator Characteristics: Ultra-fast Hyper production Hydraulic tightening and bending Electric cutting device Precise servo drive adding device Semi or automatic working mode Multi security system Automatic work by 1000 programs & subprogram Automation by PLC HMI Touch screen Friendly interface - incremental programming Remote programming & control Real time simulation & diagnostic LAN & Wi Fi communication Offset angle adjustment CHRISTMAS DISCOUNT

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder and a folding machine from the top manufacturer RAS based in Sindelfingen. Device features: RAS Folding Bench Capacity: 2.5mm steel – more for aluminum Bending length: just over 2 meters Front-adjustable depth stop, also excellent as a sheet support Hand and foot switches The machine comes from a reputable company and was professionally inspected again prior to sale Weight: see picture Hsdpfoxqpiyex Ahvei Optionally, there is also a segmented clamping beam from RAS in stock Invoice with VAT shown separately Shipping by freight forwarder can be arranged if desired Free loading as shown in the pictures Viewing and testing possible by telephone appointment. Payment in cash upon collection – if there’s anything else I can do for you, please give me a call – thank you. Collection should take place within 8 days after the auction ends. Location: 97261 Güntersleben

Condition: good (used), Year of construction: 1978, machine/vehicle number: 2884, working width: 2,000 mm, sheet thickness steel (max.): 4 mm, Equipment: emergency stop, foot remote control, We are selling our Hera press brake, model UM III. 🔧 Technical specifications: • Manufacturer: Hera • Model: UM III Hjdeycl H Hspfx Ahvsi • Working length: 2000 mm • Bending capacity: up to 4 mm steel sheet • Equipment: Backgauge for precise work. The machine must be collected using a crane. Lifting equipment is not available on site.

Condition: good (used), functionality: fully functional, working width: 1,040 mm, sheet thickness (max.): 4 mm, Counterweight in large protective housing Hedpoynhudsfx Ahvoi

Condition: used, Guillotine shear LOTZE Type HSS 20 / 7 Cutting length 2050 mm Cutting thickness 7 mm Hjdpjlmry Eofx Ahvsi with simple back gauge

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Hedpfsif Sg Ssx Ahvji Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg