sheet width 3700 mm
plate thickness 16 mm
distance between columns 3860 mm
N02yj
throat 100 mm
back stop - adjustable mm
down holder 12 Stk.
total force of the downholder 24000 kg
oil volume ca. 500 l
total power requirement 30 kW
weight of the machine ca. ca. 11,0 t
dimensions of the machine ca. 4,5 x 2,5 x 2,5 m
Max. Sheet thickness stainless steel: 12mm
Cut gap adjustment: 0-16 mm
- Machine has a back gauge adjustable from the front.
- cut line lighting
sheet width 2080 mm
plate thickness 15 / 12 mm
Benrzpspou
distance between columns 2300 mm
throat 500 mm
cutting gap adjustment mm
true cutting angle adjustable
rear stop
total power requirement 30 kW
weight of the machine ca. 11,5 t
dimensions of the machine ca. 2900 x 2150 x 2900 m
Plate thickness maximum performance: 15 mm
Plate thickness continuous performance: 12 mm
The machine is in a good optical condition and has functioned well until dismanteling.
however,There are leakages on t...
sheet width / mm
plate thickness / mm
distance between columns / mm
Manufacturer: EHT
Type: TSS 20-25
Year of construction: 1994
Max. Cutting length: 2250 mm
Max. Sheet thickness: 20 mm
Strip width min / max: 10/1000 mm
Distance between the consoles: 2530
Height above the ground: 900 mm
Bt8vidlyxg
Table length without extension arms: 3030 mm
Oil volume: 800 l
Max. Pressure: 280 bar
Operating voltage: 400V
Control voltage: 230 V.
Nominal current: 87 A.
Weight: 15.8 to
Dimensions L x W x H: 350...
sheet width 3100 mm
plate thickness 16,0 mm
thickness at "Niro-steel" 10,0 mm
distance between columns 3290 mm
Pcshurch
down holder 13 Stück
no. of strokes 8,0 Hub/min
column arm 350 mm
table height 800 mm
cutting angle 2,0 °
total power requirement 36,0 kW
weight of the machine ca. 16.000 kg
range L-W-H 3800 x 2450 x 2050 mm
Furnishing:
- heavy, hydraulic swing cut guillotine shears
- electrical backgauge
- Cutting gap adjustment
- Front control unit
- Side stop
- support arms
- rear guard
-...
2.000 mm
plate thickness 15 mm
fence ja
ja
weight of the machine ca. 14 t
B27uerjc
PIESOK - CNTA 3150/16 - 1991/ 2018- with system UNITRONIC (PLC) with program - since retrofit used very very less
Dwsgiu
Model: B 25 to 3000
Blade length: 3000 mm
Material thickness (max): 25 mm
Rake angle: 2.75 Grad
Bmcbf8xurs
Cuts per minute: 10.07
Pump pressure (max): 280 bar
Tank: 350 lt
Engine: 55 kW
Overall length: 4450 mm
Total depth: 3250 mm
Overall height: 2400 mm
Weight: approx. 26.5 tons
sheet width 3050 mm
plate thickness 16 mm
distance between columns mm
Control Cybelec DNC 10
total power requirement kW
weight of the machine ca. 16 t
dimensions of the machine ca. m
Bfvegmqgd9
number of support arms 3
manual included
with angle stop and 2 sliding support arms
spare knives available
sheet width 3000 mm
plate thickness 16 mm
distance between columns 3200 mm
throat 310 mm
stroke 300 mm
table width 820 mm
table height over floor 1215 mm
Number of downholders 12 St.
cutting angle 0,5 - 2,5 °
total power requirement 30 kW
weight of the machine ca. 19 t
dimensions of the machine ca. 3,8 x 2,65 x 2,85 m
Bt3rlqqdlm
Machine was overhauled in 2010 and was modernized with light barrier at table.
Machine will be sold with automatic back stop with DRO.
sheet width 3100 mm
plate thickness 16,0 mm
thickness at "Niro-steel" 10,0 mm
oil volume 220 ltr.
Q7by82lp
no. of strokes 8 Hub/min
down holder 17 Stück
cutting angle 2,7 °
weight 14.800 kg
range L-W-H 4000 x 2100 x 2300 mm
total power requirement 30,0 kW
weight 15.500 kg
range L-W-H 3380 x 2020 x 2200 mm
Furnishing:
- Heavy / robust swing cut sheet metal shears with
ELGO item facility P 9521
- electrical backgauge X = 1.000 mm
- manual cutting gap adjustment
- Side stop with T-slot 1.000 mm...
sheet length: 6125sheet thickness: 20,0total power requirements: 45weight approx.: 55000messurements (LxWxH): 7200x3700x2780
Bd0iju0ukv
sheet width: 4100 mm
plate thickness: 16 mm
distance between columns: 4320 mm
control: Num. NC 85/86
back gauge - adjustable: 1100 motorisch mm
down holder: 21 Stück
cutting angle adjustment: 2 °
cutting gap adjustment: ja / yes
height over floor: 900 mm
Table dimensions: L: 248 x B: 650 mm
voltage: 220 oder 380/50 V / Hz
total power requirement: 36,8 kW
weight of the machine ca.: 19,0 t
dimensions of machine: L:5,2 x B:2,4 x H:2,4 m
further technical details:
- free column passage 4320mm
- dept...
Capacity 16 mm, cutting length 3050 mm, between coloumn 3300 mm, frame depth 500 mm, cutting angle adjustable, back gauge 1000 mm, 2 ste scissors for INOX, destakeable device, dimensions 3850x2400x2600 mm, ca. 19000 kg
O8y22
- cutting thickness 16 mm - cutting length 3100 mm - under power - used condition as showed on photos
Ehi73go7
Maximum cutting length: 3150 mm
Maximum cutting thickness of the sheet metal: 16 mm
Back gauge: 10-1000 mm
Machine height: 2570 mm
Machine length: 4240 mm
Machine width: 2520 mm
Machine weight: 16300 kg
Bg3xwyj0jb
working width 3.070 mm
C0dgqqc0
16 mm
20 mm
hydraulic ja
rear stop fährt 1.580
weight of the machine ca. 24 t
sheet length: 6125sheet thickness: 16,0total power requirements: 45weight approx.: 49500messurements (LxWxH): 7200x3700x2780
Bd0ij8lz8w
sheet width: 4050 mm
plate thickness: 16 mm
distance between columns: 4900 mm
back gauge: 1000 motorisch
cutting angle: 0,5° - 3° °
cutting gap adjustment: ja / jes mm
down holder: 23 Stück
height over floor: 1030 mm
Table dimensions: L x B 4000 x 520 mm
weight of the machine ca.: 19,2 t
dimensions of machine: 5,2 x 2,2 x 2,78 m
control for program: Robosoft SC5 Controller
characteristics:
- knife length 4100mm, 4 turns possible
Jas2y0bjc
- Number of strokes: 5 - 11 strokes/min.
- Table: side...
Guillotine shears STROJARNE PIESOK CNTA 3150/16A built in 1987 by the Czechoslovakian company Strojarne Piesok.
The CNTA 3150/16 guillotine has:
- electronic bumper distance setting
- electronic knife account setting (potentiometer)
- electronic setting of the gap between the knives (potentiometer)
- hydraulic drive (hydraulic cylinders ensure the feed of the beam with the upper knife)
- hydraulic sheet clamps
Technical parameters :
- cutting line length: 3150 mm
Bfp8ni7sdw
- thickness of cut ...
- cutting capacity: 16 mm - cutting length: 3150 mm - throat depth: 350 mm - back gauge: 10-1000 mm - cutting angle: 0,5-3 degrees - motor power: 33 kW - size (LxWxH): 4240x2620x2570 mm - weight: 16300 kg - spare knives- not under power, video available
Halgmx
Hydraulic guillotine shear ESPE
Type CNTA 3150/16N
Max. sheet thickness mm 16
Minimum sheet thickness Sheet thickness mm 1,6
Maximum cutting length: 3150 mm
Nominal power 30 KW
Space requirement:
Length mm 3950
width mm 2300
Height mm 2520
Machine weight kg 16300
Ex site, free on truck.
Toftradv
It is a used machine, therefore we sell under
exclusion of any warranty.
sheet width 3000 mm
plate thickness 16 mm
distance between columns 3200 mm
throat 310 mm
stroke 300 mm
table width 820 mm
table height over floor 1215 mm
Number of downholders 12 St.
cutting angle 0,5 - 2,5 °
total power requirement 30 kW
weight of the machine ca. 19 t
J0hud7o
dimensions of the machine ca. 3,8 x 2,65 x 2,85 m
Machine was overhauled in 2010 and was modernized with light barrier at table.
Machine will be sold with automatic back stop with DRO.
sheet length: 3060sheet thickness: 20,0total power requirements: 37weight approx.: 21,5messurements (LxWxH): 3910x3395x2640
K9icayjt
working width: 4.050 mm
max. thickness: 16 mm
Dimensions L x W x H: 5.200 x 2.000 x 2.600 mm
Weight of machine approx.: 20 ton
max. stroke rate: 5-11 s.p.m.
Standard configuration
- back gauge: 1000 gear driven- cutting angle: 0,5° - 3° °- cutting gap adjustment: jes- down holder: 23 pieces- control for program: Robosoft SC5 Controller
Nkfyf
Dimensions
Length
4.000 mm
Width
E3m9ui3l8
3.300 mm
Height
2.700 mm
Weight
22.200 kg
PIESOK - CNTA 3150/25A - 1989- capacity 3150/25 mm- under power- good condition
Bi7bjbf7jd
Working width: 1250 mm
Sheet thickness at 45 kg strength up to: 25 mm
Sheet thickness for stainless steel: 18 mm
Projection: 100 mm
Stroke rate depending on the material thickness: 6 - 9 / min
Br9stscsjy
Drive power: 380 V, 30 kW
Required space: 1900 x 2400 x 2100 mm
Weight: 9000 kg
LVD Shearing Machine
Type:MV-13-16
Year:1972
Power:25hp
Ithujqd
Plate thickness:13-16mm
Working width:3300mm
Machine size-LWH:4500x2300x2100mm
Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines ar...
sheet length: 3040sheet thickness: 16,0total power requirements: 30weight approx.: 15,5messurements (LxWxH): 3870x3315x2280
Iq7finb7u
1990
good condition (used)
Guillotine shears
Ozyen
Brand LVD
Type MVS / 16
Capacity 8000X16 mm
Year 1990
Weight 80000KG
Shearing Machine from Weipert apply for toolmaker , mold maker, education and Locksmith
Cutting lenght 3200mm
Cuttiing capacity 16mm
Plate thickness (max.) 16 mm
Working length 3.080 mm
Throat 150 mm
Cutting angle 0,3 - 2,5 deg
Strokes per minute 14 H/min
Hold-down 18 Pieces
Hold-down capacity 40 t
Table size 3.380x550x840 mm
Back GaugeRear stop 1.000 mm
Br0zghjns9
Front Support ArmsNumber of support arms 3 Pieces
Length of support arms 900 mm
Drive capacityMotor rating main drive ...
Powerful and robust cutter, with variable cutting angles. Adjustable slit opening, angle stop - balls in table and digital reading of backstop. Complete with swivel control panel where all functions are operated. Extra wide opening, 350 mm. Backstop with ball screws, Adjustable cutting length directly on potentiometer, Rex Roth hydraulic system, Hydraulic tippers, central lubrication, Servo backstop and Siemens control.
Br0mcapq87
Technical Data:
Max. plate thickness 25 mm
Max. cutting lenght ...
Hydraulic. 16 mm x 7300 mm.
In working condition. I can send you a video of the machine running.
The machine needs to be put in a hole in your floor by approximately 1000 x 8000 mm in approx. 600-700 mm depth. I will send exact measures for the buyer so that the floor can be ready when the machine arrives.
Can be transported to any port in Denmark or Germany.
Weight: 45.300 kg. The machine is assembled by 2 major components. They will have to be disassembled before transport.
2cmetppwz
Measu...
Cutting bench, cutting shear
Type: Hydraulic
Manufacturer: Mengele
Type: S 25-3000
Cutting width: 3050mm
Cutting tickness: 25mm
Back gauge: 0-1000mm
Machine size: 4000x3330x3800mm
Ngs8ude9
sheet length: 4065sheet thickness: 20,0total power requirements: 37weight approx.: 27000messurements (LxWxH): 4950x3390x2570
Gvsb80
Technical data:
Ft2ukd2
maximum cutting width: 4150 mm
maximum cutting capacity with steel St40: 16,0 mm
adjustable rip fence: 1000 mm
NC control: CYBELEC DNC 30
adjustable cutting gap adjustment
throat depth: 630 mm
number of strokes: 8 - 15 /min.
working height: 850 mm
motor power: 37 kW
dimensions (length x width x height): approx. 5500 x 2800 x 2850 mm
Weight: approx. 29-to
The seller is not liable for writing or data transmission errors. The machine is in appearance, technique and wear acco...
Technical data:
- max. working width 3100 mm - max. cutting capacity St 40 16 mm
- Number of strokes depending on cutting angle and cutting length 15 - 25 pro/min
- motor - backgauge 10 - 1000 mm
- Cutting length adjustment
- Cutting angle adjustment
- 13 pcs Hydraulic hold-down devices
- front angular stop
- Drive 400 V
- Foot switch
Bolpgfmhg3
- Space requirement without support arms / backgauge
- approx. W 3700 x H 2250 x D 2250 mm
- Weight approx. 15500 kg
16mm x 4.200mm, Dimensions 4600x2400x2100 Weight 21.000Kg
B8ub7pyu
Manufacturer: DARLEY
Berbzfasw
Type: DS 3100x20
Length of cutting: 3000mm
Thickness of cutting: 20mm
sheet length: 4065sheet thickness: 16,0total power requirements: 30weight approx.: 21000messurements (LxWxH): 4930x3300x2220
E29pec2
Długość cięcia 6200 mm
Grubość cięcia 20 mm
Stan idealny
Rok 2010
Be2kae2spx
Technical data:
maximum cutting width: 3100 mm
maximum cutting capacity for steel St40: 16.0 mm
adjustable rip fence: 1250 mm
adjustable kerf adjustment
Gx7ig0u
working height: 810 mm
Engine power: 22 kW
Dimensions (length x width x height): approx. 3700 x 2500 x 2350 mm
Weight: approx. 19-to
The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear and tear according to its age; used machines are sold without any warranty.
Technical data:
-maximum working width 1250 mm - max cutting capacity St 40 20 mm
-mot. Backgauge approx. 10-1000 mm - cutting angle 2 ° 27
-RADIUS approx. 250 mm
-Through front approx. 2200 mm
-Hub number 9 1/min
-Table height 900 mm
D8fzprh
-hydraulic hold-down 10pcs
-front angle stop + support arms - lighting - footswitch - drive 400 V / 45 kW - space requirement approx. B H 2800 x 2440 x H 2300 mm
-Weight approx. 12000 kg
COMESSA
HYDRAULIC GUILOTINE SCHERE
Bfevn3xdio
WORKING LENGTH 3M
CUTTING THICKNESS 20mm
WEIGHT 23.000kgr
sheet length: 3120sheet thickness: 16,0total power requirements: 30weight approx.: 15000messurements (LxWxH): 3875x3200x2170
Bd3nkadm0h
Machine parts overhaul-haust!
Max shear power: 16 mm, at about 440 N/mm ²
Max cut width: 3050 mm
Knife loge: 3100 mm
Storender charge: 300 mm
Passage eg. The attachment: 3080 mm
Adjustability of the parallel attack: 10-1000 mm
Cut angle of the upper knife: 2 ° 30 '
G70izri
Max pressure in hydraulic system: 280 bar
Pressure in the low-hold system: 80 bar
Pressure in the rear system: 1100 bar
Nitrogen subcharge in hydraulic storage: 85 bar
Hydraulic storage content: 4 ltr.
Content of the oil tan...
Technical data:
max. cutting width: 1550 mm
max. cutting capacity for steel St40: 22.0 mm
motorised adjustable rip fence: 1000 mm
Nybjt
motor-driven adjustable cutting gap adjustment
Engine power: 10 kW
Dimensions (length x width x height): 2050 x 1600 x 2250 mm
Weight: approx. 13 tons
The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear and tear according to its age; used machines are sold without any warranty.
plate shearer, little used
I2lqdtpz
Typ : XTSL 3016
make. :Atlantic
year: 1993
weight: 14 t
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Photo gallery: the 10 strongest forklift trucks in the world
Sell now on Machineseeker! Over 220,000 inquiries per month
Sample sales contract for used machines in nine languages
Photo gallery: The World's 10 biggest excavators
10 valuable tricks for buying used machines online
