Pipe-Bending Machine

TRANSFLUID DB618

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ---- For the production of pipe geometries with bending radii from 1.5xD → Maximum bending capacity: pipe 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity: pipe 30 x 30 x 3 mm → Maximum bending capacity: pipe 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Pipe insertion length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and twisting axes. The control system's touchscreen display enables simple and intuitive programming and operation of the system. After the pipe is inserted, it is secured in the carriage by the chuck. This enables precise positioning of the pipe and thus the creation of dimensionally accurate geometries. The standard also includes a check of the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine will not issue a release. This eliminates the risk of incorrect operation. Optional additional features provide greater convenience and increase output, thus increasing the efficiency of the system. Data exchange from the optional TBS-3D pipe calculation program (PC version) takes place via USB stick or network. Existing pipe geometries can be imported using the software. Standard equipment: → 1.5 kW servo drive for the bending axis → Adjustable speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Feed servo drive → Rotation servo drive → Three-jaw chuck for locking the tube in the carriage → Pneumatic tool retraction Bedpfotr U Hlox Ahvscw Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" color touchscreen → ETH 10/100, X2X Link, 2xUSB → Foot switch operation → Data transfer via LAN or USB network → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. The control system calculates the feed values and bending angles directly after entering the length and angle. Power consumption: 400V 16A Dimensions: L: 2.3 m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Condition: used, Year of construction: 2017, Number of spindles 5 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Weight ca. 3500 kg control SCM Control 10 SCM Superset NT with workpiece return Bcedpowwl Nlofx Ahvsw ----- The machine is in cleaning and completely checking process at the moment. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ----- First left vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system Electronic horizontal positioning / motorized width adjustment 4th spindle ----- First upper horizontal spindle Motor with brake 11.0 kW Diameter 40 mm Speed 6,000 rpm T-Set quick-clamping system Electronic radial positioning / motorized height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm SCM Control 10 Includes workpiece return system Includes existing used planer heads. (Technical specifications according to the manufacturer - without guarantee!)

Condition: new, Virutex hand planer. Especially for left and right hand use Long version for 100 % straight work. 990 W, 12,500 rpm. Incl. side guide 2 pieces in original packaging Bcodpfsum Skxjx Ahvsw

Condition: excellent (used), Weinig Unimat 23 EL four-sided planer Working width 230mm Working height 160mm Head arrangement: Bottom 5.5kw Bodpfxjrb An Uo Ahvscw Right 4kw Left 5.5kw Right 4kw Top 11kw Bottom 5.5kw Top 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Rollers driven in table Pneumatic pressure pads CE certificate Year of production 2003

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 Bcjdpfovtgn Nsx Ahvew bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Bedpfx Ajn Smcljhvscw Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Stand for control panel - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture Bcedpemb U Tusfx Ahvew • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Condition: like new (used), Year of construction: 2017, Barely used UV line for panels or flooring Bsdpfx Ahev Ux R Sevecw

Condition: good (used), functionality: fully functional, Year of construction: 1998, bending radius (max.): 600 mm, mandrel length: 1,200 mm, wall thickness: 8 mm, Transfluid DB 40100ST Mandrel bending machine Tube bending machine The above machine is a mandrel bending machine designed exclusively for the production of tubes and profiles with an outer diameter of 40-100 mm, max. 110x5 mm with a max. wall thickness of 8 mm or for the processing of solid materials with an outer diameter of up to 70 mm. Pipe push-on length/usable length: 1200 mm Radius range max:600 mm Bjdper H Havefx Ahvscw Bending height:1200 mm Machine data Length:4000 mm Width:2600 mm Height:1400 mm Weight:9000 kg

Condition: good (used), Year of construction: 1995, Offer 24315 Bedpjt Stfhofx Ahvscw Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment via hand wheels - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - 10 contact grinding rollers approx. Ø 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm