Section benders shaft diameter 31-50mm for sale
Your location was not identified (Edit)
|
6
bending angle max.: °
work height max.: mm
voltage: 400 V
total power requirement: ca. 3,5 kW
machine weight approx.: 430 kg
dimension machine [...]: 1,4 x 0,72 x 1,25 m
dimension control panel: 0,35 x 0,30 x 0,75 m
rarely used!
Application area:
- to bend pipe profiles, U-profiles and angle irons
- with two outer brackets for angle bending
- control via electronic program for positioning of the center roll (4 main programs with up to 14 procedures)
- 2 bending rolls outer distance 300mm
- 1 ce... more
|
|
1
new
Shaft diameter 70 mm
Roll diameter 200 mm
Delivery time approx. 6-8 weeks of order placement
Shaft diameter: 80 mm
Roll diameter: 200 mm
Driven rollers: 2
Motor power: 3 kW
Speed: 8 m / min.
Bending capacity (section / min. diameter): flat iron upright: 60 x 10 mm / 500 mm – 20 x 5 mm / 250 mm
Lying flat iron: 80 x 20 mm / 500 mm, 50 x 5 mm / 250 mm
Quadradstahl: 32 x 32 mm / 400 mm, 12 x 12 mm / 250 mm
Round steel: Ø 35 mm / 350 mm, Ø 10 mm / 250 mm
Tube: Ø 60 x 2 mm / 600 mm – Ø 15 x 1, 5 mm /... more
|
|
5
bending speed 2,1 m/min
roll diameter 137 / 132 / 132 mm
35 / 30 / 30 mm
CE-Certificate
bending capacity - angular iron 40 x 5, Ø 400-500 mm
bending capacity - flat iron 60 x 10, Ø 500 mm
60 x 2, Ø 900 mm
total power requirement 0,75 kW
weight of the machine ca. 200 kg
dimensions of the machine ca. 850 x 730 x 1500 mm
Foot pedal with emergency stop button
two driven lower rolls
Upper pressure roll mechanically adjustable
Horizontal and vertical operation
W3sgc
Shafts are made of special s... more
|
|
1
power capacity 1,5 + 0,75 kW
shaft diameter 50 / 40 mm
roll diameter 152 / 162 mm
bending speed 3.300 mm/min
Drive power: 1.5 + 0.75 kW
Shaft diameter: 50 / 40 mm
Roll diameter: 152 / 162 mm
Bending speed 3.3 m / min
Dimensions: (WxLxH) 1.000 x 950 x 1.450 mm
Weight: approx. 500 kg
Table (see photo):
A: standard rollers
B: optional special rollers
Further information:
- Two driven bottom rollers, the upper pressure roller is based on a scale
mechanically adjustable.
- The special steel sh... more
|
|
4
:50 mm
:150 mm
throat:120 mm
total power requirement:1,5 kW
weight of the machine ca.:0,36 t
dimensions of the machine ca.:1,1 x 0,8 x 1,4 m
The PB 50-3 is a profile bending machine with manual adjustment of the top roller via a handwheel.
The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine.
- Manual adjustment of the top ro... more
|
|
1
new
Shaft diameter: 50roll diameter: 155working speed: 4,5motor power: 1,5length: 750width: 1000heigth: 1400weight approx.: 400
Technical specifications:
- Steel frame
- Two rolls direct driven by a gear system
- Rolls are hardened
- Rolls shafts are special steel material hardened and ground
- Roll shafts housed by bearings
- Standard rolls
- Guide rolls
- Horizontal and vertical working position
Options:
- Digital Readout EURO 500,--
- Angle Lateral Guide Rolls EURO 650,--
- Double Speed Working ... more
|
|
5
I - beam section - flat steel 80 x 16 (d 1200) mm
I-beam section - upend 50 x 15 (d 1000) mm
Bf2jl3ta
L-beam 50 x 5 (d 1200) mm
round material 40,0 (d 800) mm
bar material dia. max. 70 x 2,0 (d 1600 ) mm
square material 80x30x3 (d 4000) mm
channels - flange UNP 80 (d 800 ) mm
bending speed 4,4 m/min
roll diam. toproll 157 mm
bore 50,0 mm
total power requirement 1,1 kW
weight 485 kg more
|
|
1
new
Shaft diameter 90 mm
Roll diameter 260 mm
Delivery time approx. 6-8 weeks of order placement
Shaft diameter: 90 mm
Roll diameter: 260 mm
Driven roller: 3
Engine power: 5,5 kW
Speed: 6.37 m / min.
Bending capacity (section / min. diameter): flat iron upright: 80 x 20 mm / 2000 mm; 30 x 10 mm, 100 x 20 mm / 800 mm / 300 mm
Lying flat iron: 125 x 25 mm / 600 mm; 60 x 5 mm / 300 mm
Quadradstahl: 45 x 45 mm / 500 mm; 15 x 15 mm / 380 mm
Round steel: Ø 50 mm / 500 mm, Ø 15 mm / 380 mm
Tube: Ø 100 x 2,... more
|
|
3
Bending machine ZOPF
- model ZB 80/3 H
- with foot pedal
- with standard roller set
TECHNICAL SPECIFICATIONS:
- three driven shafts, smooth surface
- hydraulic adjusting of the center roller
- working position horizontal and vertical
- digital readout with memory
- shafts are supported by conical bearings
- slide bars on the slide-support are exchangeable
- shaft diameter: 50 mm
- roller diameter: 192 mm
- shaft rpm: 7,5 U/min
Vr7ihu
- voltage: 400V 50Hz 3Ph
- drivingmotor: 1,5 kW
- motor for ... more
|
|
9
power capacity 0,75 kW
shaft diameter 35 / 30 mm
roll diameter 137 / 132 mm
bending speed 2.100 mm/min
Drive power: 0.75 kW
Shaft diameter: 35 mm / 30 mm
Roll diameter: 137/132 mm
Bending speed 2.1 m / min
Dimensions: (WxLxH) 850 x 730 x 1500 mm
Weight: approx. 200 kg
Table (see photo):
A: standard rollers
B: optional special rollers
Further information:
- Two driven bottom rollers, the upper pressure roller is based on a scale
mechanically adjustable.
- The special steel shafts are groun... more
|
|
1
angle steel/side length siehe TD mm
double T-iron on the x-axis siehe TD mm
U-iron on the x-axis siehe TD mm
Stntgk
total power requirement 1,5 kW
weight of the machine ca. 0,385 t
dimensions of the machine ca. 930 x 730, x 1400mm m more
|
|
1
new
Shaft diameter: 50roll diameter: 155working speed: 4,5motor power: 1,5length: 750width: 1000heigth: 1400weight approx.: 400
Technical specifications:
- Steel frame
- Two rolls direct driven by a gear system
- Rolls are hardened
- Rolls shafts are special steel material hardened and ground
- Roll shafts housed by bearings
- Standard rolls
- Guide rolls
- Horizontal and vertical working position
Options:
- Digital Readout EURO 500,--
- Angle Lateral Guide Rolls EURO 650,--
... more
|
|
7
I - beam section - flat steel 100 x 20 mm
I-beam section - upend 50 x 15 mm
L-beam 35 x 35 mm
bar material dia. max. 70 x 2 mm
tool taper 50,0 mm
Ntny9
diameter of upper rolls 165 mm
diameter of lower rolls 175 mm
total power requirement 3,75 kW
weight of the machine ca. 650 kg.
range L-W-H 1,0 x 1,28 x 1,3 m more
|
|
1
new
Shaft diameter 50 mmRoll diameter 155 mmDelivery time prompt, subject to prior saleShaft diameter: 50 mmRoll diameter: 155 mmPowered rolls: 2Motor power: 1.5 kW Speed: 4.5 m/minBending power (cross section / min.): 4.5 m/min. Diameter): Flat bar on edge: 60x10 mm / 500 mm; 40x10 mm / 400 mmFlat bar horizontal: 100x15 mm / 450 mm; 60 x 10 mm / 350 mmSquare wheel steel: 35x35 mm / 900 mm; 20x20 mm / 300 mmRound steel: Ø 35 mm / 600 mm; Ø 30 mm / 400 mmPipe: Ø 70x2 mm / 1.000 mm; Ø 30x2 mm / 500 mm... more
|
|
2
angle steel/side length 40 x 40 x 5 mm
round steel bars 30 mm
U-iron on the x-axis 50 x 25 x 5 mm
roll diameter - bore 30 mm
roll diameter -toolpieces 118 - 148 mm
turning speeds 20 U/min
voltage 400 V / 50 Hz
total power requirement 0,75 kW
weight of the machine ca. 0,250 t
dimensions of the machine ca. 1,2 x 0,75x 1,3 m
Machine has a standard rollset for profile: flat (upright) 50 x 10, flat 50 x
15,
square 30, square pipe 20 x 20 x 3, rectangular pipe 50 x 30 x 3
Further rollsets opt... more
|
|
6
Ring Rolling Machine MB 50
- country of origin Turkey
- with standard roller set
- footpedal
- two drivn rollers
- horizontal and vertical use
Chahmyji
- bending capacity round tube up to 60 x3,6 mm
- angle iron 50x50x6 mm
- solid steel 35 mm
- main motor 1,5 kw
- shaft diameter 50 mm
- weight 325 kg
- 400 volt 3 phase more
|
|
8
2019
new
Technical data:-Type: PB35 country of origin Turkey-with foot pedal right/left-hand drive: 50mm groove 14mm-electric-heavy current weight approx. 400kg shaft diameter 50mm-bottom rolls are driven-hardened special steel shafts-1 set hardened rolls-bottom rolls are driven-side straightening rolls-horizontal and vertical working
Bj3epevyy more
|
|
1
new
Shaft diameter: 50Upper Roll Diameter: 152Bottom Roll Diameter: 162high performance hydraulic: 8working speed: 4,5motor power: 1,1length: 810width: 950heigth: 1500weight approx.: 500
Technical specifications:
- Steel welded construction frame
- 3 Rolls are motor driven
- Hardened shafts from special steel material
- Top roll hydraulic moveable up-down
- Horizontal and vertical working position
- Standard rolls
- Guide rolls
- Brake motor equipped for the precision bending
- Mobile control panel
... more
|
|
4
I - beam section - flat steel 100 x 20 mm
I-beam section - upend 50 x 15 mm
L-beam 35 x 35 mm
bar material dia. max. 70 x 2 mm
Ebfrmpb
bending speed 13 / 26 U/min.
total power requirement 1,5 kW
weight of the machine ca. 1.550 x 820 x 1.200 kg. more
|
|
1
new
Shaft diameter 60 mm
Roll diameter 215 mm
Delivery time approx. 6-8 weeks of order placement
Shaft diameter: 60 mm
Upper roller diameter: 215 mm
Lower roller diameter: 215 mm
Driven roller: 3
Motor power: 1,5 kW
Speed: 4 m / min
Bdsjsw3f29
Bending capacity (section / min. diameter): flat iron upright: 80 x 20 mm / 1200 mm, 40 x 10 mm / 400 mm
Lying flat iron: 120 x 25 mm / 600 mm, 50 x 10 mm / 400 mm
Quadradstahl: 50 x 50 mm / 800 mm, 20 x 20 mm / 400 mm
Round steel: Ø 50 mm / 800 mm, Ø 20 mm / ... more
|
|
4
shaft diameter:40 mm
roll diameter:150 mm
Revolution:14 min.
delivery channels:72 mm
connected load:400/50 v/Hz
total power requirement:1,5 kW
weight of the machine ca.:0,34 t
dimensions of the machine ca.:800 x 870 x 1350 mm
Nup2t
The PB 40-3 is a profile bending machine with manual adjustment of the top roller using a handwheel.
All of our profile bending machines can be used in vertical and horizontal working positions and are equipped with three driven rollers. Switching between two or thr... more
|
|
2012
new
power capacity 1,1 kW
shaft diameter 40 mm
roll diameter 152/162 mm
bending speed 6 U/min
Control NC Automatik
pressure capacity max. 8 t
range L-W-H 900 x 600 x 1100 mm
weight 490 kg
Automatic bending please show video
- Three driven shafts
- Hydraulic adjustment of the center roller
- Digital readout with memory
- Working position horizontal and vetical
- Shaft are supported by conical bearings
- Slide bars on the slide-support are exchangeable
NC Control for the ZB 70/3 HA
- two axe... more
|
|
3
flat steel 40 x 10 (R=200) mm
flat steel 60 x 15 (R=150) mm
U-iron on the x-axis UPN60 (R=400) mm
square material 25 x 25 (R=200) mm
T - beam - web outwards 70 x 35 x 6 (R=250) mm
Eacyfn
T - beam - web inwards 70 x 35 x 6 (R=350) mm
round bar steel 28 (R=150) mm
total power requirement 2 kW
weight of the machine ca. 1,2 t more
|
|
4
2016
good (used)
Semi-automatic mandrel bender GM-SB-38NCBA produced in 2016 by the brand ZHANGJIAGANG KING-MACC MACHINERY MANUFACTURING CO.
Characteristic data:
- bending capacity of the black steel pipe: 38 x 2 mm
- stainless steel pipe capacity: 32 x 2 mm
- steel profile capacity: 30 x 30 x 2 mm
- steel profile capacity (flat position): 30 x 20 x 2 mm
- round steel bar capacity: 16 mm
- square steel bar capacity: 15 x 15 mm
- maximum bending radius: up to 200 mm
- minimum bending radius: from 20 mm
- bending... more
|
|
13
Profile bending machine
model Tauring Alfa 50
shaft diameter 50 mm
Three rollers driven
Dylxmjtei
manual adjustment
with footpedal
ca. 3 KW motor 400 V
weight ca. 650 kg
capacity up to solid 35 mm
round tube 60,3 x 3,2 mm
with some bending tooling more
|
|
1
new
Shaft diameter 80 mm
Roll diameter 260 mm
Delivery time approx. 6-8 weeks of order placement
Shaft diameter: 80 mm
Roll diameter: 260 mm
Driven roller: 3
Engine power: 7,5 kW
Bdsjttpwyc
Speed: 6 m / min.
Bending capacity (section / min. diameter): flat iron upright: 80 x 15 mm / 800 mm – 40 x 10 mm / 400 mm
Lying flat iron: 125 x 25 mm / 600 mm, 60 x 8 mm / 400 mm
Quadradstahl: 45 x 45 mm / 500 mm; 15 x 15 mm / 350 mm
Round steel: Ø 50 mm / 600 mm, Ø 15 mm / 350 mm
Tube: Ø 100 x 2, 5 mm / 1200 m... more
|
|
4
:50 mm
:150 mm
feed:120 mm
Dv07sfl
Number of revolutions:10 rpm
total power requirement:1,5 kW
weight of the machine ca.:0,43 t
dimensions of the machine ca.:1,2 x 0,85 x 1,75 m
The PB 50-3H is a profile bending machine with a hydraulic adjustment of the top roller by means of a hand pump. This Profi Bend model is also equipped with a digital indicator for the top roller position.
The profile bending machines can be used in vertical and horizontal working position and are equipped with three dr... more
|
|
7
Profile bending machine TAURING ALFA50
shaft diameter: 50 mm
Top roller diameter: 165 mm
Lower roller diameter: 175 mm
Engine power: 3 kW
Bidub8hgum
Revolutions per minute: 8
length: 1.000 mm
Width: 1.280 mm
height: 1.300 mm
Weight: 650 kg
Good condition fully functional can be inspected and tested on site.
Shipping also abroad.
Inspection :
Basically, I would like to point out that in order to avoid misunderstandings, the article can be inspected and tested under power before purchase. Please... more
|
|
7
excellent (used)
Shaft diameter: 60 mmHydraulic roller infeedRight and left-hand rotation via foot switchMany accessories
Dfaf3zt7 more
|
|
4
Axis diameter 40 mm
driven bending rolls 2 Stk.
work speed 10 U/min
35 (250) mm
35 x 35 (250) mm
flat material 50 x 10 (300)
L-beam 50 x 50 x 6 (400) mm
tube diameter 70 x 1,5 (700) mm
60 x 60 x 6 (400) mm
channels - flange 80 x 45 x 6 ( 350)
total power requirement 1,85 kW
weight of the machine ca. 0,28 t
dimensions of the machine ca. 0,56 x 1,43 x 0,98 m
3of9k9
Profile bending machine with:
- Foot pedal right / left
- with digital display
- Bending speed 20% higher than other machines... more
|
|
4
Motorized ring and profile bending machine
Inexpensive ring and profile bending machine for universal application
Millimetre scale for adjusting the printing rollers
ground and double supported drive shafts, which are
turn opposite taper bearings
central block sliding on hardened slide shoes in one piece
mech. infeed, 2 driving rollers, horizontal and vertical use
Ddkyhfoce
Technical data:
Working range shafts Ø 50 mm
Working range rollers Ø 155 mm
Working range bending speed 4.3 m/min
Drive pow... more
|
|
1
new
Shaft diameter 110 mm
Roll diameter 320 mm
Delivery time approx. 6-8 weeks of order placement
Shaft diameter: 110 mm
Roll diameter: 320 mm
Driven roller: 3
Engine power: 7,5 kW
Speed: 4.98 m / min.
Bending capacity (section / min. diameter): flat iron upright: 100 x 20 mm / 800 mm, 30 x 10 mm / 400 mm
Dicq0w3h
Lying flat iron: 200 x 30 mm / 1200 mm; 160 x 35 mm / 800 mm and 80 x 5 mm / 400 mm
Quadradstahl: 60 x 60 mm / 750 mm; 15 x 15 mm / 400 mm
Round steel: Ø 75 mm / 800 mm, Ø 15 mm / 450 mm
T... more
|
|
6
1986
ready for operation (used)
Profile bending machine
model Tauring Alfa 40 R
shaft diameter 40 mm
Three rollers driven
manual adjustment
with footpedal
ca. 2 KW motor 400 V
weight ca. 500 kg
capacity up to solid 30 mm
Wojfmvaf
with standard roller set
with one set 42,4 plastic rollers more
|
|
STANDARD FEATURES
Steel frame
Bhyti0louu
Reducer driven gear system
Top roll idle
Top roll up and down movement by hand
Bottom rolls fixed and powered
Rolls and shafts are made of SAE 1050 quality steel
All rolls and shafts are hardened and grinded
Able to bend flat bars and box sections with standard rolls
Standard rolls are interchangeable to adjust gap for bending
Standard guide rolls
Horizontal and vertical position
Users manual book in English or Turkish
CE certificate more
|
|
9
new
Technical data:
-Manufacturer. Ostas
-Type: OPK45
Country of origin Turkey
-with foot pedal right/left rotation
My77n
-Recording: Welle50mm nut 14mm
-Electric
Power
-with digital display
Weight approx. 500 kg
-Hardened special steel shafts
-1 set of standard rollers
-OPK42 are powered by 2 rolls
Upper roll hydraulically up and down can be provided
-Separtes controller
-Manually adjustable in a direction lateral leveling rollers
-Manual lubrication
-Horizontale and vertikaleArbeitsweise
Geared mo... more
|
|
0
Axis diameter 40 mm
driven bending rolls 3 Stk.
work speed 10 U/min
35 (250) mm
35 x 35 (250) mm
flat material 50 x 10 (250)
L-beam 50 x 50 x 6 (300) mm
tube diameter 70 x 1,5 (700) mm
60 x 60 x 6 (400) mm
channels - flange 80 x 45 x 6 ( 350)
Biggjgeomj
total power requirement 1,85 kW
weight of the machine ca. 0,3 t
dimensions of the machine ca. 0,56 x 1,43 x 0,98 m
Main features of CE40 MR3
Minimum radius 450mm
Max. Power 2 "G x 3.2mm
Every machine is equipped with a universal tool set... more
|
|
3
|
|
1
new
Shaft diameter 35 mm
Roll diameter 137 mm
Delivery time approx. 8 weeks from order placement
Shaft diameter: 35 mm
Upper roller diameter: 137 mm
Lower roller diameter: 137 mm
Driven roller: 3
Engine power: 1,1 kW
Speed: 7 m / min
Bending capacity (section / min. diameter): flat iron upright position: 35 x 8 mm / 300 mm
Lying flat iron: 50 x 12 mm / 400 mm
Square steel: 18 x 18 mm / 250 mm
Round steel: Dm. 22 mm / 200 mm
Tube: Dm. 40 x 1, 5 mm / 500 mm
Rectangular tube upright: 30 x 15 x 2, 5 mm ... more
|
|
15
Detailed information
Roll number 3.0
Capacity square standard steel
Type
No CNC
Type of CNC DIGITALES
Pinch roller number 3.0
Capacity rectangle standard steel
Capacity circle standard steel
Capacity L standard steel
Capacity U standard steel
Capacity T standard steel
Capacity I standard steel
Length x width x height 930.0 mm × 680.0 mm × 1055.0 mm
Weight 350.0 kg
B79ftmho
operating hours
under power
Condition: good
CE standard Yes
Status to visit
Bending profiles BPR. Model CPS-35. With digital... more
|
|
6
2016
good (used)
Technical data:
-Manufacturer. Akyapak (AKBEND)
-Type: APK45
Country of origin Turkey
-with foot pedal right/left rotation
-Consumption: 50mm nut 14mm (upper oven)
-Consumption: 40mm nut 10mm (lower oven)
-Electric
Power
Weight approx. 500 kg
Machine ST-52 steel construction
-Hardened special steel shafts
-1 set of standard rollers
-APK 45 being driven all 3 reels
Upper roll hydraulically up and down can be provided
-Separtes controller
-Manually adjustable in a direction lateral leveling roller... more
|
|
0
Axis diameter 50 mm
driven bending rolls 3 Stk.
work speed 9 U/min
round material 60 mm
square material 50 x 50 mm
flat material 80 x 20
L-beam 80 x 60 x 12 mm
tube diameter 90 x 4,0 (600) mm
Biggjpvuak
80 x 80 x 11 (1000) mm
channels - flange UPN 100 (1000)
total power requirement 2,0 kW
weight of the machine ca. 0,45 t
dimensions of the machine ca. 0,65 x 1,3 x 1,2 m
Main features of CE60H
- Bending speed 20% higher than for machines of the same class
- Set of universal tools included wi... more
|
|
6
Hydraulic profile bending machine make Ercolina type CE 40 H3 V2
machine # 0219007, year of construction 2019
Technical data:
shaft diameter 40 mm
Driven shafts 3
piston pressure 7 t
Infeed of the middle roll Hydraulic
Number of programs 8
Bending capacity:
Gas pipe 2" x 3.2 mm
Round tube 70 x 1,5 mm
Square tube 50 x 50 x 3 mm
Round bar 35 mm
Flat iron 50 x 10 mm
Angle iron 50 x 50 x 6 mm
T-steel 60 x 60 x 6 mm
Stkqvg
2 working positions horizontal/vertical
Infeed stroke 115 mm
Rolling speed 5/1... more
|
|
4
motor - ring - bow - bending machine
Make: KNUTH Type: MSB 30
Machine no.: 121217 Year of construction: 2000
Technical data:
- horizontal working position
- 2 motor driven rollers
- manual vertical feed of the upper roller
- Stroke top roller up to 30 mm
- shaft diameter 40 mm
- effective shaft length 35 mm
- Shaft rotation 12 rpm
- Roller diameter 76 - 88 mm
- Drive 400 V 1.1 kW
- Bending capacity approx. - Round tube 30 x 1.5 mm
- flat steel 30 x 10 mm
- E - Foot sw... more
|
|
5
TUGRA RING BENDING MACHINE
TYPE HPK 41
- Asdiameter 40 mm
- Bovenste wals wordt hydraulically displaced
- Digital uitlezing
- Horizontaal/verticaal te gebruiken
- Voetbediening
S328v9
- Noodstop
- Documentation
- 400V
DUTCHMACH
Metalworking machinery
ENSCHEDE - NETHERLANDS
(3 km from the German border) more
|
|
4
Flat iron over the high edge 40 x 10 (R = 200) mm
Flat steel 60 x 15 (R = 150) mm
U-iron over x-axis UPN60 (R = 400) mm
Shaft diameter 50 mm
Top roller diameter 155 mm
Sub-roll diameter 148 mm
Bfuflulcqq
Working speed 4.5 m / min
Total power requirement 1.5 kW
Machine weight approx. 400 kg
Space required approx. 1.2 x 1 x 1 m
The machine is operated by a footswitch. more
|
|
7
2018
new
Ring bending machine
Technical data:
-Manufacturer. Binmak
-Type: BP50
Country of origin Turkey
Bd0bnww3lt
-with foot pedal right/left rotation
-Consumption: 50mm nut 14mm
-Electric
Power
Weight approx. 320 kg
Shaft diameter 50 mm
Bottom rollers are driven
Cast iron construction
-Hardened special steel shafts
-1 set of hardened rolls
Bottom rollers are driven
-Lateral leveling rollers
-Horizontal and vertical work more
|
|
10
Profile bending machine Fabr. AUERBACH Type F 9 A
Masch. 15646 built in 1957
Technical data:
Bending capacity Flat iron 160 x 30 mm
Flat iron upright 60 x 16 mm
Square iron 30 x 30 mm
Round iron Drm. 35 mm
Tubes 50 / 40 mm
U-iron NP 10
T-iron 30 x 30 x 4 mm
T-iron flat 100 x 50 mm
Angular iron 50 x 50 x 7 mm
Roller width 160 mm
Rotations of the driving roller 10 /min
Power requirement 0.75 hp
Dimensions 900 x 1000 x 1400 mm
Weight approx. 300 kg
with
- motor drive
S3xgk9... more
|
|
1
Bending machine ZB 70/3 H eco
- with foot pedal
Bd8snkx7sd
- with standard roller set
- three driven shafts smooth surface
- hydraulic adjusting of the center roller
- working position horizontal and vertical
- digital readout with memory
- shafts are supported by conical bearings
- slide bars on the slide
-support are exchangeable
- shaft diameter: 40 mm
- roller diameter: 152/162 mm
- shaft rpm: 8,5 U/min
- voltage: 400V 50Hz 3Ph
- drivingmotor: 1,1 kW
- motor for hydraulic: 1,1 kW
- hydraul... more
|
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Sheet metal working
Dealer for Sheet metal working
