Round rolling machines motor-driven over 14mm thickness for sale
Identified location:
New Zealand
(Edit)
3-roll 3500x 100 mm
hydraulic plate bending machine with pre-pinch
model MG35100 year 2010
CAPACITY:
-Plate width 3500 mm
-Capacity rolling plate thickness 100 mm
-Pre-bending thickness 80 mm
Bt8xskars9
-rolling smallest Ø1100 mm
Performance
plate roll 3500x100 mm into ID 4 mtrs.
plate pre-bend 3500x80 mm into ID 4 mtrs.
Configuration and accessories installed:
-useful surface length on the rolls 3550 mm
-upper roll size 790 mm
-lower rolls size 750 mm
-Harde...
prebending: 13,0sheet length: 3100sheet thickness: 16,0total power requirements: 17,5weight approx.: 11,6messurements (LxWxH): 5,31x1,66x1,59
Bdkdliy2ic
sheet width 3150 mm
plate thickness 24 mm
Berp3xc9fy
pre-bending 16 mm
roll diameter 455 mm
total power requirement 30 kW
weight of the machine ca. 40 t
dimensions of the machine ca. m
motorized 2-roller-drive
hydraulical bearing
motorical adjustment of the down rolls
with extended roll ends for profile rolls (profile rolls not included)
sheet width 2100 mm
plate thickness 20 mm
pre-bending .
2r0sqy
diameter of upper rolls 300 mm
diameter of lower rolls 400 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
ESPE - XZCT 3000/16 - 1991
Nwhjl
Rolling width: 3.000mm
Rolling thickness 3x toproll Ø:22mm
Rolling thickness 5x toproll Ø:30mm
Wlyxz7fx
Rolling thickness prebending: 20mm
Top Roll Ø: 420mm
Bottom Roll Ø: 400mm
Side roll Ø: 300mm
Number of rolls: 4
Rolling speed: 0 - 4 m/min
Adjustiment lower roll: 200mm
Adjustment side rolls: 200mm
Number of driven rolls: 2
Power: 22kW
Length: 6.000 mm
Width: 2.800 mm
Height: 2.800 mm
Weight: 22.000 kg
Please Note: The information o...
DAVI_MCB 3045 WT _ 3000x40 MM
Rolls surface hardened
Conical bending hydraulic attachment
CONFIGURATION WITH THE MACHINE
Nr.1 Upper support 5 ton hydraulic operated , shell ID max 5 mtrs - CNC programmable
Nr.1 Side support – 3 Tons capacity left side
Nr. 1 Side support – 3 Tons capacity right_side with finger pusher for Wind Tower application 2,5 Tons capacity
Nr.1 Table conveyor – 12 meter – 10 tons capacity tilt_lift hydraulic for with tower application
Nr. 1 Complete upgra...
sheet width: 3000 mm
plate thickness: mm
pre-bending: 16
bending capacity max. - round: 22,6 mm
feed:: m/min
distance between columns: mm
roll dia. top roll: Ø 300 mm
roll dia. bottom roll: Ø 300 mm
feed speed: m/min.
working pressure: bar
Fh8lugt
Total power requirement: kW
weight of the machine ca.: ca. 17,0 t
dimension machine xH: 6,3 x 2,0 x 2,2 m
sheet width 2550 mm
plate thickness 25,0 mm
pre-bending 20,0 mm
diameter of upper rolls 300 mm
side roll diameter 220 mm
diameter of lower rolls 220 mm
total power requirement 11,0 kW
weight of the machine ca. 8.000 kg
dimensions of the machine ca. 3750 x 1660 x 1680 mm
Cvfjenly
** New price ~ 90.000 euros
Furnishing:
- hydraulic 3-roll bending machine
- with conical bending device
- including 1x CENTER sheet metal support
* electr. / hydr. can be moved via the controls
- Hydraulic folding s...
The 3-sheet metal rolling mill STANKOIMPORT IB 2222 V4 16X2000 was built in the USSR in 1984. The three-sheet metal rolling mill has a mechanical drive, the upper roller yoke is also opened by a mechanical gear.
Technical data of the rolling machine STANKOIMPORT IB 2222 :
- sheet width: 2000 mm
- rolled sheet thickness at bending: 16 mm
- rolled sheet thickness for bending: 12 mm
- upper roll diameter: 270 mm
- diameter of the lower rollers: 260 mm
- smallest bending radius: 240 mm (minimum dia...
WMW - UBBDA 30/4000 - 1990
Bhu3imjyjj
bending length: 2100sheet thickness: 16upper roll diameter: 270
Technical specifications:
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
Dwefoe
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are hydr...
4 ROLL 3000X30MM DIGITAL
-Width max 3100 mm
-Thickness max 30 mm
Bpxrh9rf
-Thickness pre-bend 22 mm
-Top roll mm. 370
-lower roll mm. 340
-Power electric 20 Hp
Smaller bending diameter ID 450 mm
depending on plate strength and thick
-hardened rollers – polished quality finishing
-variable rolling speed
Direct gearboxes & axial hydromotors rotation driven.
-conical bending attachment, angle cone , rollers tilt
-calibration re-rolling welded plates
-Adjustable pre-pinch upon t...
sheet width: 3000 mm
plate thickness: mm
pre-bending: 16
bending capacity max. - round: 20 mm
feed:: Blechvorschub: 1 - 4 m/min
distance between columns: 3.260 mm
roll dia. top roll: Ø 380 mm
roll dia. bottom roll: Ø 360 mm
feed speed: 1 - 4 m/min.
working pressure: ca. 190 bar
Total power requirement: 30 kW
weight of the machine ca.: ca. 17,0 t
dimension machine xH: 6,3 x 2,0 x 2,2 m
Application: cylindrical round bending, conical round bending
A hydraulic motor type SAI M2-300 is used for ro...
Technical data:
working width: 4100 mm
max. bending capacity: 35,0 mm
bending: 30,0 mm
CNC control: DAVI "LEONARDO
Gac3ipflq
diameter upper roller: 500 mm
diameter lateral lower rolls: 410 mm
diameter middle lower roller: 500 mm
conical bending device by inclination of the two side rollers
hydraulic folding bearings
hydr. sheet holding device:
length: 3000 mm; height: 4000 mm
power main motor: 45 kW
dimensions (length x width x height): approx. 8500 x 2500 x 2750 mm
dead weight: approx. 40 tons
...
Ref. -No.: 10030
Brand: STÖLTING
Type of control: CNC
Bt7l33hfmo
Control: Meier Modul SA 515
Storage location: Halberstadt
Country of origin: Deutschland
Top roller: 670 mm
Bottom roller: 600 mm
Usable length: 2500 mm
Sheet width: 2500 mm
Sheet thickness: 60 mm
Stretch limit: 360 N / mm²
main engine: 2 x 55 kW
Actuator: 18,5 kW
Bale length: 2600 mm
Cylinder diameter: 250 mm
Cylinder pressure: 278 bar
Rolling force: 5450 kN
Bending stress: 66 N / mm²
Deflection: 0,67 mm
Inquire. Torque: 430658 Nm...
ESPE - XZM 2000/20- max. working lenght: 2000 mm - max- thickness: 20 mm - min. inside diameter of the round tub: 375 mm - diameter of the upper cylinder: 300 mm - diameter of the lower cylinder: 275 mm - dimensions LxWxH: 5300x1700x1600 mm - weight: 10300 kg- upper cylinder is lifted by crane (hydraulics is available but was not used for this purpose)
Bmwjunt3nn
bending length: 2600sheet thickness: 16upper roll diameter: 300
Technical specifications:
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
Bdf7g2buj9
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are ...
4 ROLL DUAL PRE-PINCH CNC ROLLING MACHINE NEW 2021
-Width of plate 3000 mm
-Thickness of plate rolling 15 mm
-Thickness of plate pre-bend 12 mm
minimum bending diameter ID 350 mm
Rolls dimensions:
-Surface length mm. 3100
Btn8mbcruo
-Top roll mm. 290
-pinch roll mm. 270
-Power electric 10 Hp
Technical data:
-rolls hardened surface high resistance
-variable rolling speed
-Powered driven hydraulic rolls rotation
-conical bending attachment roller type
-calibration system...
AK BEND SHEETMETAL BENDING ROLLS
MODEL - AHK 370 3100
Fszcurbwy
YEAR 2007
22 KW MOTOR
HYD DROP END
DIGITAL DISPLAY
HYD PINCH
Technical data:
working width: 3100 mm
max. bending capacity: 18,0 mm
max. bending capacity: 13,0 mm
diameter top roller: 340 mm
diameter lateral lower rolls: 340 mm
diameter middle bottom roll: 320 mm
conical bending device by inclination of the two side rollers
SPS-SIEMENS control
mobile control panel with digital display
motor power: 15 kW
hydraulic folding bearings
Ithz9et
CE-mark
dimensions (length x width x height): approx. 5000 x 2100 x 1700 mm
dead weight: approx. 15 tons
The seller is n...
Rolling width: 2.000mm
Rolling thickness 3x toproll Ø:13mm
Rolling thickness 5x toproll Ø:16mm
Rolling thickness prebending: 10mm
Top Roll Ø: 270mm
Bottom Roll Ø: 250mm
Side roll Ø: 200mm
Fdldpt97i
Number of rolls: 4
Rolling speed: 5m/min
Control: Siemens
Side supports: yes
Length: 4.000 mm
Width: 1.800 mm
Height: 1.800 mm
Weight: 8.500 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from...
DURMA - HRB-4 3020 - 2013- rolling capacity: 20 mm - main motor: 22 kW - width: 2060 mm - length: 5560 mm - height: 2050 mm - weight: 13000 kg - good condition as showed on photos
Ikeriwgiy
bending length: 2600sheet thickness: 20upper roll diameter: 330
Technical specifications:
Ft0lbz2
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are hyd...
4 ROLL 3100 X 60 MM MG brand dual initial full pre-pinch
Heavy duty model - 4 rolls driven motorized each with independent gearunit
Top roll Ø530 mm special alloy steel high grade hardened
Conical plate bending attachment with all the lower rolls tiltable
Digital readout for the cone bending
Infinitely variable running speed traction power stepless 0 to 6 mtr/min
Electric installed 75 Hp on centralized hydraulic power unit
EU Vac 400/50 - rewirable US Vac 480/60
...
Technical details
sheet width 4000 mm
hot bending plate thickness 275 mm
cold bending plate thickness 110
weight of the machine ca. 510 t
upper valt diameter 1240 mm
Brhfwkcyfo
Necessary power 350 Amp
lower valt diameter 1150 mm
Technical details
sheet width 3100 mm
plate thickness 60 mm
pre-bending 50
total power requirement 90 kW
weight of the machine ca. 53 t
Additional information
Used 3-roll hydraulic bending rolls
Capacity rolling: 3100 x 60mm
Bpyuyoggnn
Capacity pre-bend: 3100 x 50 mm
Top roll dia: 610 mm
Side rolls dia: 520 mm
Power output: 90 KW
Machine weight: 53 tons approx
Equipped with: cone rolling, extra top roll dia 500mm, vertical sheet support,
front and rear lateral sheet supports.
Machine is in ex...
Rolling width: 4.100mm
Rolling thickness 3x toproll Ø:10mm
Rolling thickness 5x toproll Ø:16mm
Rolling thickness prebending: 13mm
Fbsvo8sp3
Top Roll Ø: 400mm
Bottom Roll Ø: 370mm
Side roll Ø: 290mm
Number of rolls: 4
Rolling speed: 5m/min
Top support: Yes
Side supports: Yes
Number of driven rolls: 2
Length: 6.200 mm
Width: 2.200 mm
Height: 2.200 mm
Weight: 22.100 kg
Please Note: The information on this page has been obtained to the best...
TECHNICAL DATA:
Number of rollers FOUR
Geometry Linear guides
Maximum sheet width mm 3000
Upper roll diameter mm 390
Bottom roll diameter mm 370
Side roll diameter mm 295
Installed power PS 40
Infinitely variable rotation m/1' 4-8
Machine weight (guaranteed) Kg 19.000
Guaranteed performance with material yield strength 260 N/mm²
Rolling capacity (full working width) Ø 1950 mm 25 mm
Bending capacity (full working width) Ø 1950 mm 20 mm
Rolling capacity (full working width) Ø 507 mm 18 mm
Bend...
bending length: 2100sheet thickness: 25upper roll diameter: 330
Technical specifications:
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are hydraulic p...
Heavy model 2500x22 mm thickness
Hydraulic 4 roll plate bending machine
plate width 2500 mm
thickness 22 mm
pre-bending 16 mm
surface length 2600 mm
top roll size 320 mm
minimum rolling dia. Ø380mm
Power 20Hp on hydraulic unit
Installed configuration
Hardened rolls
conical plate bending
Electric control joysticks manual roll bending
Digital display with CNC 4 axis programmable
up to 300 programs automatic rolling
Predisposed to take installation
upper support 3Ton Ø4500 mm larg...
3000mm x 30mm Capacity
Hydraulic Drop End
More videos of the rolls demonstrating available, please email us to request them.
Overall Dimensions -
L - 6000mm
Jqv9okjl
H - 2700mm
W - 2800mm
Weight 30Ton
PREBENDING DOUBLE
. Maximum bending length 3.000 mm
. Bending capacity 40 mm
. Prebending capacity 30 mm
Bpyp7yt8rg
. Top roll diameter 590 mm
. Bending rolls diameter 490 mm
. Main motor 45 kW
. Bending motor 30 kW
. Digital readout in all axis
. Approximate weight 45 t
. Approximate dimenssion.:
. Length: 8.400 mm
. Width: 2.600 mm
. Height: 3.700 mm
. Trench height: 1.780 mm
Type / Model: 2.000 x 40
Working width: 2.000 mm
Material thickness: 10 to 40 m
Diameter top roller: 400 mm
Diameter bottom roller: 340 mm
Diameter outer roller: 190 mm
F9w80y2j
Connection: 30 kW
Accessories/equipment:
Condition: good
weight:
Dimensions: 5.800 x 2.100 x 2.700 mm
max rolling capacity (cold): mm. 32
max prebending capacity (cold): mm. 24
at diameter mm. 2050
with material yield strength N/mm2 260
working length: mm. 3050
number of rolls: four
top roll diameter mm. 410
pinching roll diameter mm. 390
driven rolls : two
rotation speed 5 m./min.
rolls rotation: hydraulic
installed power: 30 PS
2slcfe
Voltage 400V, 50Hz, 3Ph
Inkl.:
- hardened & polished rolls
- cone bending device
- electronic rolls parallelism
- Siemens PLC Control
- CE certificate
...
bending length: 2100sheet thickness: 20upper roll diameter: 300
Technical specifications:
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are hydraulic p...
3 roll hydraulic plate bending machine
Capacity 2500 x 25 mm with pre-bend
3 rolls hydraulic power drive
Conical plate bending attachment
Hydraulic open dropend top roll tilt-up
Digital position readout, console electric on wheels
Extended shafts for profile bending rollers
Manuals and schematics along with the machine
lenght on the rolls 2550 mm
Top roll Ø385 mm
Side rolls Ø355 mm
Power installed 22kw voltage 380/50
Brycejz782
Dimension: 6mtr. x 1.8 mtr. x H2.1 mtr.
Weight 19 Ton
mach...
Technical data:
working length: 3050 mm
max. bending capacity: 25,0 mm
bending capacity: 20,0 mm
diameter upper roller: 380 mm
diameter bottom roller: 350 mm
motor power: 15 kW
hydraulic folding bearing
conical bending device
control panel with digital display
dimensions (length x width x height): approx. 5200 x 1800 x 1950 mm
weight: approx. 14,5 tons
The seller is not liable for writing or data transmission errors. The machine is in appearance, technique and wear according to the age; used mac...
4-ROLL Hydraulic Plate Rolling Machine
Working length 3100 mm
Maximum thickness Pre-bending 40 mm
Bending 50 mm
Yield Point: 240 N/mm2
Number of rolls 4
Motor Power 55 kW
Min. diameter mm - Ø Top Roll Diameter x 3
Top roll Ø 540 mm
Bottom roll Ø 510 mm
Side roll Ø 440 mm
Length 6700 mm
Height 3000 mm
Width 3000 mm
Weight 40.000 kg
With:
Cone bending device
Induction hardened rolls
Digital readout for side rolls
Fully welded steel (St-52) frame
Separate moveable control panel
Dual bending speed...
US Standard Metric
Rolling width
2.500 mm
Rolling thickness 3x toproll Ø
25 mm
Rolling thickness 5x toproll Ø
30 mm
Rolling thickness prebending
20 mm
Top Roll Ø
360 mm
Side roll Ø
340 mm
Number of rolls
Bna7p3ptrz
3
Rolling speed
0-5 m/min
Power
30 kW
Dimensions
Length
4.500 mm
Width
2.500 mm
Height
2.500 mm
Weight
20.000 kg
bending length: 3100sheet thickness: 25upper roll diameter: 390
Technical specifications:
- Hardened and polished rolls
Cqbkoxfs
- Conic bending device
- Digital readout for side rolls
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are hy...
3-roll hydraulic plate bending machine with pre-bending
model MG-AK325 year 2003
CAPACITY:
-Plate width 3000 mm
-Capacity rolling plate thickness 25 mm
-Pre-bending thickness 20 mm
-Minimum rolling dia.450 mm
Capacity rolling plate 1500x30 mm
Machine configuration and accessories installed:
-useful surface length on the rolls 3100 mm
-upper roll size 380 mm
-lower rolls size 360 mm
-Digital position readouts.
-Hardened surface high strength of the 3 rolls.
-all 3 drive...
XZMP 20 x 2000 mechanical 3-roll bending.
Year of prod. 1989 (CZECH REPUBLIC).
Mqkrh
Max. thickness of the bent detail 20mm.
Max. the thickness of the rolling 32mm deatal.
Max. detail width 2000mm.
Diameter of the upper roll 400mm.
Main engine power 30kW.
Total power 76kW.
Hydraulic system pressure 40bar.
Dimensions (length X width X height) 7600 x 2860 x 2500mm.
Weight 34600kg.
Maximum plate width: 4500 mm
Maximum sheet thickness: 60 mm
Minimum sheet thickness: 10 mm
bending speed: 5,6 m/min
Number of bending rollers: 3
machine length: 11190 mm
machine width: 5080 mm
Hjpt9ex
machine height: 5620 mm
machine weight: 186000 kg
Manufacturer: PARMIGIANI
Type: VBH 3100 x 130 / 100 Hydrotronic
Serial number: L200/0196/QL, year of construction 2009
Technical data:
Bending capacity 130 mm
Diameter of the top roller 860 mm,
Diameter of the lower roller 800 mm,
Diameter of the lateral rollers 660 mm,
Bale length of the rollers 3,100 mm,
minimum internal bending diameter 990 mm,
installed capacity 260 kW,
Weight 150.000 kg,
equipped with:
CNC touch screen control Stradivarius/ Fast by Parmigiani
for manual and CNC operation
My...
Specifications
US Standard Metric
Rolling width
3.000 mm
Rolling thickness 3x toproll Ø
60 mm
Rolling thickness 5x toproll Ø
70 mm
Rolling thickness prebending
50 mm
Top Roll Ø
650 + 450 mm
Bottom Roll Ø
650 mm
Number of rolls
3
Rolling speed
0 - 4 m/min
Number of driven rolls
2
Power
73,6 kW
Dimensions
Length
10.500 mm
Width
4.000 mm
Height
3.000 mm
Downloads
Specifications
Rolling width: 3.000mm
Rolling thickness 3x toproll Ø: 60mm
Rolling thickness 5x toproll Ø: 70mm
Rolling thickness prebe...
bending length: 3100sheet thickness: 35upper roll diameter: 430
Technical specifications:
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
Nhhrp
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are hydra...
3-roll hydraulic plate bending machine with dual pre-pinch planetary pyramid
model MG360I - MG brand - year 2001
-Plate width 3000 mm
Oht8f
-Capacity rolling plate thickness 60 mm
-Pre-pinch plate thickness 50 mm
-Minimum rolling dia. 750 mm with medium thickness.
Machine configuration and accessories installed:
-useful surface length on the rolls 3100 mm
-upper roll size 620 mm
-lower rolls size 560 mm
-Digital position readouts.
-Hardening treatment of the 3 roll...
working width: 3000 mm
metal sheet thickness: 15 mm
metal sheet thickness when bending: 10 mm
Bdxdidfcpt
upper roller-Ø: 320 mm
below roller-Ø: 310 mm
working speed: ca. 5,5 m/min
electrical connection: 380 V kW
weight: ca. 17000 kg
space needed: 5450 x 2100 x 2450 mm
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
How to receive 100% of our e-mails
Morlock Motors official partner of Machineseeker and Truckscout24
Photo gallery: The World's 10 biggest excavators
Sample sales contract for used machines in nine languages
Sell now on Machineseeker! Over 220,000 inquiries per month
