3
material width 250 mm
material thickness 0,25 - 3,0 mm
no. of straightening rolls 11
straightening roll diameter 30 mm
Pzwct
speed 6 - 60 m/min
power requirement 15,0 kW
weight 1,1 t
dimensions (WxDxH) 1,1 x 1,7 x 1,5 m
with infinitely varibale drive, supporting rolls, hydraulic automatic straightening pressure, coil loop control ultrasonic
5
Leveller / Straightener
Material width : 250 mm
Number of levelling rolls: 9 pcs.
Diameter of the levelling rolls: 30 mm
Material thickness: 0,4 - 3,5 mm
Cross section: 750 sq mm
Feeding speed: 3-15 m / min
B8eh2odo0h
Required power: 1,8 kW
1
Weingarten decoiler 12 ton
Hatkw0b
- width: 1500 mm
- hy
4
material width: 650 mm
material thickness: 0,6 - 1,0 mm
7nkbrtiy0
no. of straightening rolls: //3
no. of straightening rolls: unten/down/abajo:3
diameter of upper rolls: Ø 71 x 690 mm
diameter of lower rolls: Ø 71 x 690 mm
throughput speed: 50 m/min
height over floor: 1400 mm
total power requirement: 14 kW
weight of the machine ca.: 1,4 t
dimension machine xH: 1,35 x 1,4 x 1,8 m
- 3 pcs feeding rolls Ø 80 x 680mm, not adjustable, revolving
- upper rolls: 3 pcs bending rolls Ø 71 x 690mm, adjust...
5
material width:300 mm
Y7kj8mbt0
no. of straightening rolls:13+2+2
straightening roll diameter:60 mm
3
2 height-adjustable roller conveyors with weight compensation via springs
Bsng0vunnp
4
material width 220 mm
material thickness 0,15 - 3,0 mm
no. of straightening rolls 19
straightening roll diameter 18 mm
0,15 - 3,0 mm
material thickness band 0,15 - 1,5 mm
material cross-cut workpiece 560 mm²
Urggrqwf
material cross-cut band 200 mm²
speed 10 - 18 m/min
power requirement 1,7 kW
weight 0,45 t
dimensions (WxDxH) 1,2 x 1,4 x 1,5 m
with infinitely variable drive, supporting rolls
leveller SCHUBERT with the dimensions:
220 x 0,30 - 3 mm, 19 rolls, diam.of the rolls 18 mm,
Oaobdca
under power
3
working area SW : 17 - 52 mm
working range flach 18x5 - 50x25 mm
working area 1 Ebene bis 120 x 20 mm
speed 50 m/min
bar length ca. 5000 mm
9
Links / Rechts
15 kW 965 U/min, 220/380V
B7pb8ubjts
Dimensions (L/W/H) 1400 / 1200 / 1680 mm
weight ca. 4,6 t
6
material width: 400 mm
material thickness: 2 mm
Number of Straightening rolls: oben/upper/arriba: 5x
Number of Straightening rolls: unten/lower/abajo: 6x
roll width: 410 mm
throughput speed: 9-20 m/min
total power requirement: 5,5 kW
weight of the machine ca.: 1,3 t
space requirement of the machine approx.: L:2,1xB:1,0xH:1,35 m
leveling machine with coil / machine has 11 rolls
Lqzqz
- upper rolls adjustable around 14mm, 1st and last roll driven
- lower rolls not adjustable, driven
- each 1 intak...
1
material width:75 mm
total power requirement:1,5 kW
Lqyj8vil
dimensions of the machine ca.:1,90 x 1,15 x 1,25 m
4
material width 3000 mm
material thickness 0 mm
no. of straightening rolls 0
total power requirement 22 kW
weight of the machine ca. 14,5 t
dimensions of the machine ca. 7,5 x 2,5 x 2,9 m
D U N K E S
Hydraulic Straightening System for Flat material and Section Material
With Straightening Press ( C-Frame ) Model HR 63/TR 25/ HRW 25
Year 1990 ( H 89-1960 )
_____
Consisting of:
Straightening C-Frame Press, Model HR 63, Pressure 63 to, Stroke of
Piston 160 mm, Straightening speed up/down 25/75 ...
material width 120 mm
material thickness 0,2 - 5,0 mm
no. of straightening rolls 19
straightening roll diameter 18 mm
material cross-cut 450 mm²
speed 3 - 18 m/min
Power capacity 2,0 kW
Weight 0,65 t
Dimensions (WxDxH) 1,2 x 1,5 x 1,5 m
B2yjo90olg
with infinitely variable drive
6
material width 250 mm
material thickness 2 - 4 mm
Bqcjwfrbwa
no. of straightening rolls 7
run-in height 1250 mm mm
strip intake tiltable, positiv 25 °
strip intake tiltable, negativ 30 °
total power requirement 3 kW
weight of the machine ca. 800 kg
dimensions of the machine ca. m
Straightening machine SCHUBERT with the dimensions: 350 x 0.14 - 8.00 mm, 19 straightening rollers, diameter of the RW 24 mm.
- Central oil lubrication of the cardan shafts
Cak8gu7jzn
- Central grease lubrication of the straightening roller bearings
- Straightening roller bearing BRONZE
- Support roller bearing NEEDLE BEARING
- infeed table
- Outfeed conveyor belt
The straightening machine was checked and revised by the specialist team.
A leveling test with your material can be arranged by app...
4
material width: 200 mm
material thickness: 1,5 mm
Number of Straightening rolls: 5x oben/upper/arriba
no. of rolls: 6x unten/ lower/abajo
throughput speed: nicht bekannt/ unknown/desconocido m/min
current: 220/50 A/Hz
total power requirement: 1,5 kW
weight of the machine ca.: 0,447 t
space requirements of the machine approx.: L:0,88xB:0,76xH:1,26 m
description:
machine does have 11 rolls
upper roll: width: 210mm, dia. approx. 60mm, driven adjustable
lower roll: width: 210mm, dia. approx.60mm, dr...
5
sheet width:120 mm
coil weight:75 kg
Lrhgzor7
dimensions of the machine ca.:2,50 x 1,25 x 1,50 m
material width 1650 mm
material thickness 6 - 20 mm
no. of straightening rolls 11
straightening feed 10 m/min
straightening roll diameter 160 mm
adjustment 10- 40 mm
total power requirement 76 kW
weight of the machine ca. 39,2 t
Bhyvy9xybb
Machine does have exchange cassettes of rolls. We supply 1 set of extra
cassetes along with the machine. Rolls are supported by backup rolls.
4
material width 420 mm
material thickness 0,5 - 6,5 mm
no. of straightening rolls 9
straightening roll diameter 50 mm
speed 0 - 20 m/min
Power capacity 5,5 kW
F7er83k
Weight 3,1 t
Dimensions (WxDxH) 1,6 x 1,4 x 1,8 m
with infinitely variabel drive
2
Catalog No. : 5652
Psfnb
Type: MD6-RE60.1300
Producer: LC CATTANEO
Made in: 2014
Characteristic:
Maximum width of the sheet metal: 1300 mm
Maximum thickness of the sheet metal (Normal Steel): 0.8-3 mm
Max. Speed: 60 m/min
Height adjustment from the floor: 990-1360 mm
8
material width 125 mm
material thickness 2 mm
straightening feed 5 - 30 m/min
total power requirement 1,5 kW
weight of the machine ca. 460 kg
Cfhtnbs0
swiveling straightening unit
6
sheet width: 250 mm
plate thickness: 2 mm
number of rolls: 11
straightening feed: 5...30 m/min
infeed height: 1250 mm
total power requirement: 4,0 kW
weight of the machine ca.: 620 kg
dimensions of machine: 1,15x1,02x1,5 mm
dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m
Band Leveling Machine with feed
equipment:
- sideways band guidance rolls
S8wcbeykz
model:
- band intake height horizontal:1250mm
- tiltable: positiv 30°; negativ 15°
3
material width:140 mm
dimensions of the machine ca.:1,30 x 0,78 x 0,70 m
Jtzhnq
4
pressure 025 t
throat 250 mm
stroke 300 mm
total power requirement 12 kW
Cglmuwkc
weight of the machine ca. 3,5 t
dimensions of the machine ca. 1,4 x 1,3 x 2,3 m
4
material width 400 mm
material thickness 0,5 - 4,0 mm
no. of straightening rolls 9
straightening roll diameter 60 mm
weight 0,70 t
Dimensions (WxDxH) 1,1 x 1,1 x 1,6 m
23ojfzer
1
Straightening force: 1000kN, straightening stroke: 160mm, installation height: 880/ 720mm, throat depth: 500mm, table height: 700/ 990mm, length: 16,700mm, width: 2700mm, height: 3000mm, weight: 16.5t.
B9esxpspww
6
Number of Straightening rolls: 15 Stück
plate width: 1000 mm
plate thickness: 8 mm
smallest sheet thickness: 2 mm
distance between columns: 1340 mm
infeed width: 1280 mm
straightening feed: bis - up to 16 m/min
roll diameter: 100 mm
number of rolls: oben / upper / arriba: 7
number of rolls: unten/ lower/ bajo: 8 Stück / pcs
Total power requirement: ca. 31 kW
weight of the machine ca.: 21,5 t
dimensions L x W x H: 4,0x2,15x2,8 m
no. of straightening rolls:
Beffuzuqk3
Machine is still in the tech...
3
plate width:120 mm
Glugvld
plate thickness:1,5 mm
no. of straightening rolls:19
straightening roll diameter:12 mm
precision straightening machine, stepless feed, adjustable upper straightening roller, all rollers
driven
leveller ARKU RM 1825 with the dimensions: 250 x 0,30 - 3,00 mm, 19 rolls, diam.of the rolls 18 mm
B73n9yztp0
tests with material possible
material width 250 mm
material thickness 0,4 - 3,5 mm
no. of straightening rolls 9
straightening roll diameter 30 mm
speed 3 - 15 m/min
material thickness at 250 mm material width 3,0 mm
Pzwax
material thickness at 200 mm material width 3,5 mm
power capacity 1,8 kW
weight 0,9 t
Dimensions (WxDxH) 1,45 x 1,4 x 1,55 m
with infinitely variable drive
8
GSW DECOILER WITH STRAIGHTENER
COIL WEIGHT 1500kgr
SHEET METAL WIDTH 500mm
Qh3n9
SHEET METAL THICKNESS 4mm
ADJUSTABLE SPEED WITH INVERTER
IN TOP CONDITION
MADE IN GERMANY
15
Technical data:
Sheet width: 1665 mm
sheet thickness material: 4,0 - 20,0 mm
B7xm8lnpdo
number of rolls: 7 (3 + 4)
diameter of straightening rolls: 190 mm
Production speed: 4 - 20 m/min.
dimensions (length x width x height): approx. 3200 x 1800 x 2300 mm
Weight: approx. 10 to
The seller is not liable for writing or data transmission errors. The machine is in appearance, technique and wear according to the age; used machines are sold without any warranty.
6
plate width: mm
coil weight: t
coil internal dia.: mm
sheet width - max.: 800 mm
sheet width - min.: 300 mm
thickness of strip/band: 5,0 mm
Payload: 12,0 to (Coil)
band speed: 4,5 / 25 m/min
work height max.: 1700 mm
total power requirement: PS
Weight approx.: 7,3 + 6,62 t
dimensions of coil: 3,2 x 1,9 x 2,7 + 6,62 to m
dimension machine xH: 2,5 x 2,6 x 2,45 + 7,3 to m
Wird komplett als Bandanlage (Haspel+Beladevorrichtung+Richtmaschine+Richtmaschine mit Vorschub) zusammen mit Lager Nr. 01005...
5
material width:1500 mm
material thickness:35 mm
no. of straightening rolls:21
sheet width - min.:700 mm
sheet thickness - min.:10 mm
roll diameter:120 mm
straightening feed:0 - 20 m/min
number of support rolls:20 Rollen pro Walzenpaar
run-in height:1450 mm
07whkqoly
total power requirement:115 kW
weight of the machine ca.:75 t
dimensions of the machine ca.:2,8 x 5,2 x 3,4 m
1
Voltage: 380/ 220V.
Bhhbbygbwe
2
LEVELER 6 HI construction
type RM 14 / 50 / 21-1500 TZ
material stainless steel / aluminium
tensile strength 800 N/mm² (MPa)
yield point 350 N/mm² (MPa)
material width 50 – 1.550 mm
material thickness 0,50 – 3,00 mm
working speed 12 m/min.
no. – leveling rolls 21
leveling roll – Ø 50 mm
roll length 1.850 mm
no. – intermediate rolls 23
intermediate roll – Ø 30 mm
roll length 1.670 mm
no. – support 14 (7 x above / 7 x below)
no. – support rolls (backup rolls) 175 (complete)
support roll – Ø ...
3
9 +4 roll plate levelling machine fully hydraulic operated , manual use and cnc programmable controlled.
Performances: steel grade 260MPa 1000 x 20 mm
Plate max width 1000 mm
Range of plate thickness up to 20 mm
Straightening unit
Nr. of rolls lower bench 5 x Ø 175 mm all the 5 rolls motorized with axial gear unit and hydromotor individual directly coupled to each shaft.
Nr. of rolls upper bench 4 x Ø 150 mm each of the roll installed on rectilinear guides system individual ...
4
All information without guarantee.
Bhj2vqwwog
A demonstration is at any time possible in our showroom.
4
material width: 400 mm
material thickness: 2 mm
Number of Straightening rolls: oben/upper/arriba: 5x
Number of Straightening rolls: unten/lower/abjo: 6x
roll width: 410 mm
throughput speed: 9-20 m/min
total power requirement: 5,5 kW
Weight approx.: 1,3 t
space requirement of the machine approx.: L:2,1xB:1,0xH:1,35 m
description:
- upper rolls adjustable around 14mm, not driven
- lower rolls not adjustable, driven
S8x08vk3y
- each 1 intake/output roll (dia 35x410mm)
equipment:
- drum intake (L:1...
3
sheet width - max.:130 mm
straightening roll diameter:40 mm
:5
:2+2
sheet thickness - min.:0,4 mm
sheet thickness - max.:3,5 mm
Gxkimq7d3
weight:0,4 t
dimensions of the machine ca.:0,6x0,65x1,15 m
with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via
analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm
control, very go...
Make Haeusler
YOP 2002
Technical Data
Hydraulic / MechanicalHydraulic
Belziprjy8
Max. Sheet thickness20 - 70 mm mm
5
Used quality German Zopf section ring rollers for sale – in stock
ZB 70/2.M
Year 2004
Shaft Diameter 40mm
Roll diameter 152 / 162mm
Shaft Rpm 8.5 U/min
Voltage 400/50 V/Hz
Driving motor 1.1kw
Adjustment way 120mm
Qz0d70m
Weight 395 kg
Can be tested under power with your material
Brand new in stock for sale as well as a larger size than these
3
tube Ø: 10 - 50 mm
wall thickness: 1 - 6 mm
reference material (tensile strength): 400 N/mm²
Bxuylmkkhy
speed: approx. 120 m/min
4
band width: 80 mm
plate thickness: 1,5 mm
number of rolls: 5
total power requirement: 1,2 kW
Bnmwkdf0
weight of the machine ca.: 150 t
space requirements approx. LxWxH: 1,1 x 0,7 x 1,4 m
straightening rolls:
- 2 upper rolls, 3 lower rolls
- material feed is performed via two compressed air controlled rolls
- compressed air connection is not mounted
i.D.
3
plate width:120 mm
plate thickness:1,5 mm
no. of straightening rolls:19
straightening roll diameter:12 mm
dimensions of the machine ca.:0,8 x 0,7 x 1,4 m
precision machine with 19 straightening rollers, pressure manually adjustable and readable via 4 measuring gauges, forward and reverse run
H2kczqd
5
material width:600 mm
material thickness:max. 6 mm
no. of straightening rolls:23
straightening roll diameter:30 mm
bending speed:10 m/min
connected load:4,5 kVA
dimensions of the machine ca.:1,00 x 1,80 x 1,60 m
Ltfzqmap
weight of the machine ca.:2,45 t
precision double-roller machine, motorised push-button roller adjustment (divided front/back),
forward / reverse roller drive control, manual central lubrication, 2 precision straightening roller-positioning gauges
5
sheet width:0 mm
coil weight:0 t
coil internal dia.:0 mm
Capacity:1000 kg
total power requirement:0 kW
weight of the machine ca.:0 t
dimensions of the machine ca.:0 m
Y7nacp2q2