Roll forming lines for sale
Your location was not identified (Edit)
|
6
number of stations: 12 pcs.
vertical center distance: 75 mm
horizontal center distance: 130 mm
work shaft diameter: 25 mm
Material width max.: 130 mm
Strip thicknes max. at Rm=200 MPa Aluminium: 1,4 mm
Strip thicknes max. at Rm=400 MPa Steel: 1,0 mm
Work shaft pairs per cassette: 6 pcs.
Bculuuorfv
Axial adjustment of work shaft: +/- 2,5 mm
Rollforming speed: 40 m / min more
|
|
5
Profiling line
16 stations
Forming speed in automatic mode: 0 - 15 m
Profile: 0.4 m / min
Maximum material thickness: 1 mm
Maximum input material width: 675 mm
Maximum length of the product: 10 m
Precision of the division of the semifinished product of the transport length: +/- 0.2 mm
Working mode: automatic / manual
Bamqy3ckx8
Rated voltage: 3x400 / 230V
Rated power: 33 KW
Rated current: 80 A more
|
|
3
Sheet width 300 - 880 mm x1.7 mm, 0.8 mm aluminium, with serrated knife for cutting to length, with control unit, with programming unit
Machine is repaired, checked, cleaned and is then fully functional by a specialist, test run is carried out
machine weight: 760 kg
Space requirement: 1510/1810 x 1475 x 1200 mm
Total power requirement: 400 V
Colour: grey
Profile height: 25 mm
belt width up to: 800 mm
Yrurlc
Infeed width up to: 870 mm
Profiling speed: 11 m/min more
|
|
7
Profiling line
* Number of stations: 8 pcs.
* Vertical distance of the shafts: 80 - 130 mm (adjustable)
Biigjguudb
* Horizontal distance of the shafts:
180 mm
* shaft diameter 32 mm
* belt width max.: 420 mm
* max. strip thickness for Rm=200N/mm2 Aluminium: mm
* max. strip thickness for Rm=400N/mm2 Steel: mm
* decoiler more
|
|
4
ready for operation (used)
Adhesion height 75 mm
. .
Ttpn2kyp
Delivery promptly, subject to prior sale
Adhesion height: 75 mm
Used pants sticking punch SCHLEBACH HS more
|
|
6
number of stations: 48 pcs.
vertical center distance: 75 mm
horizontal center distance: 130 mm
work shaft diameter: 30 mm
Material width max.: 200 mm
Strip thicknes max. at Rm=200 MPa Aluminium: 2,0 mm
Bculuk7lru
Strip thicknes max. at Rm=400 MPa Steel: 1,5 mm
Work shaft pairs per cassette: 1 pcs.
Axial adjustment of work shaft: +/- 2,5 mm
Rollforming speed: 40 m / min more
|
|
9
2011
good (used)
The profile perforating machine INTESO S3130T was manufactured in 2011 in the Czech Republic.
Dv7z7u
Technical parameters:
- Maximum internal diameter of the sheet metal coil: 80 mm
- Maximum length of the finished product: 3000 mm
Technical data :
- screen control panel: SIEMENS
- maximum length of profiles: 3000 mm
- maximum cross-section of perforated profiles: 120 x 80 mm; fi 80 mm
- automatic linear feed
- optical sensor for automatic control of the correct length of the part
- linear posi... more
|
|
300 - 800 mm x 0,7 mm, 0,8 mm aluminium, 0,5 mm stainless steel, with RS-cross cutter, with LM length measurement, with B & R control, with hole punch, with cassette set Sofit Panel 12 stations for facade cassettes, condition very good, nearly unused
Machine is repaired, checked and cleaned by a specialist and is then fully functional. Test run is being carried out.
machine weight: 1250 kg
Space requirement: 3250 x 1740 x 1275 mm
Total power requirement: 400 V
Svlyo9e
Colour: blue/grey
Profile h... more
|
|
5
1995
used
Sheet metal straightening machine with reel, strip line, straightening machine, sheet metal straightening machine, plate straightening machine, roll straightener, roll straightening machine,
Bexrkvisw0
-max material width 815 mm
-max material thickness 0.75 mm
-Number of straightening rollers 8 pieces
-Reel max load 4 to
-Manufacturer Schleicher
-Type HE-160-1000 more
|
|
11
Profiling line
Number of stations 9 pieces
* Vertical distance of the shafts: 80 - 130 mm (adjustable)
* Horizontal distance of the shafts:
315 mm
Dyaoy02wo
* shaft diameter 32 mm
* belt width max.:approx. 720 mm
* max. strip thickness for Rm=200N/mm2 Aluminium: mm
* max. strip thickness for Rm=400N/mm2 Steel: mm
* decoiler
* Hydr. scissors more
|
|
5
1994
repair required (used)
Lovent profiler working. Performs both male and female snap-lock profile. In the middle forms the flat bayonet. The profiling machine works but needs maintenance.
Bigrvcqdwo more
|
|
14
1999
ready for operation (used)
The line is used for the production of profiles from galvanized, open and closed sheets.
For window reinforcements and Z and Cw structural profiles with perforation.
Profile thickness: 0.5 - 2.5 mm
Profiling speed: max 30 m/min
Maximum tape width: 397 mm
Maximum capacity of the unwinder: 5 tons
Bh70fdi0qt
Maximum band diameter: D = 1800 mm
Type of unwinder: double-sided
Diameter of working shafts: 63.5 mm
Maximum number of workstations: 20
Shut-off system: waste-free, matrix-continuous
The lengt... more
|
|
1
250 - 870 mm x 0.7 mm steel, 0.8 mm aluminium
Fe7yjlb
The machine is repaired, checked and cleaned by a specialist and is then fully functional. Test run is performed.
Machine weight: 420 kg
Space requirement: 1250 x 1470 x 1100 mm
Total power requirement: 400 V
Colour: grey
Profile height: 25 mm more
|
|
11
GUZZETI - ITALYA Tube mill for Steel and Galvanised tubes.
-2007 completely overhauled
2roldy
Thickness: 0.8 to 3.0 m
Speed - 100 m/min.
Welding Section - 200 kw
Size of moulds:
Round pipe: 48,42,60,75
L type: 30x30, 38x38,
Half round pipe: 45, 60
Oval pipe size: 60, 20x38
Squer pipe size: 30x30, 40x40, 40x20, 20x38, 30x40, 60x40, 70x30, 80x40, 60x60
Line was complete renew in 2007 more
|
|
5
1990
repair required (used)
Lockformer profiler working. Performs both male and female snap-lock profile. The profiling machine works but needs maintenance.
Ffhsjgk more
|
|
15
2004
good (used)
It is used for the production of profiles made of galvanized sheet metal, open for window reinforcements and thin-walled profiles by cold rolling.
Profile thickness: 0.5 - 2mm
Profiling speed: max 40m/min
Maximum tape width: 208 mm
Maximum capacity of the unwinder: 2 tons
Maximum band diameter: 1540 mm
Type of unwinder: one-sided
Diameter of working shafts: 63.5 mm
Maximum number of workstations: 12
Bh70cd7cij
Shut-off system: waste-free, continuous matrix mechanical
The length of the line after... more
|
|
6
1991
excellent (used)
Hydraulic sheet mill for series and unit production. The solid welded construction ensures long-term use of the machine. Induction hardened rollers. The control panel provides full control over the rolling mill.
Standard equipment: control panel.
It is possible to obtain a certificate of entry into service (declaration of conformity).
TECHNICAL DATA
Producer: JAMMES S.A.
Model: H.C.3.30.20
Production year: 1991
Max. sheet width: 3000
Max. sheet thickness: 25 mm
Upper cylinder diameter: 4... more
|
|
11
2001
ready for operation (used)
Manufacturer: Profiilikeskus Oy
Specifications: trapezoidal profiles 20;
Crfevp90s
Coil specification: 1250 mm inlet width;
Sheet thickness: 0.45 - 0.6 mm;
Machine dimensions: L9000x W1800x H1560
Power consumption: 3x400 3kw 50Hz 16A
Machine weight: 4000 kg
Due to competition protection, they are sold outside Estonia. more
|
|
10
AUSTRIAN & GERMAN BRAND TUBE LINE. For Steel and Galvanised tubes.
Year - 2000.
Thickness : 0.9 to 5 mm
Pipe range - 38 - 127 mm
Speed - 100 m/min.
Welding Section - 300 kw
Bgxw3pz37n
Round pipe size: 30, 35, 38, 40, 50, 60, 70, 80, 100, 120
Squaer size: 60x40, 80x40, 70x30, 100x40, 100x50, 100x60, 120x 40, 120x60 more
|
|
2
Profiling machine to close sheet metal ducts for air conditioning in a single passageway
Bhfinph8ed more
|
|
15
1999
good (used)
It is used for the production of profiles made of galvanized sheet metal, open and perforated profiles by cold rolling.
Profile thickness: 0.5 - 2mm
Profiling speed: max 25m/min
Maximum tape width: 208 mm
Maximum capacity of the unwinder: 2 tons
Maximum band diameter: 1540 mm
Type of unwinder: one-sided
Jvltue
Diameter of working shafts: 63.5 mm
Maximum number of workstations: 12 plus 10 stations with perforation
Cut-off system: waste-free, matrix
The length of the line after installation: 2560... more
|
|
4
2001
good condition (used)
Last 15 year not used, good for Ventilation air duct elbow production
Bwh0b72a more
|
|
1
Mobile, standard version,.
-Measuring EM = electro-Mech. Length measuring device cm divisions
-with cutting and cross QT = hand operated rolling scissors before the profiling
-with cutting/longitudinal LS = longitudinal separation for pass cars. Stop adjustment will bring the separation roller in position.
-without Abcoiler
7h882ttsy
Steel sheet thickness 0.7 mm
Sheet thickness ALU 0.8 mm
Overall dimensions 1600 x 1370 x 670/870 mm
Machine weight: 315 kg
Infeed width 160-780 mm
Profiling speed ... more
|
|
11
Technical Details :
Machine B:
ITALYA Tube mill for Steel and Galvanised tubes.
-2007 completely overhauled
Thickness: 0.8 to 2.5 mm
Czujvwzi
Speed - 50 m/min.
Welding section - 200 kw
Size of moulds:
Round pipe: 48,42,60,75
L type: 30x30, 38x38,
Half round pipe: 45, 60
Oval pipe size: 60, 20x38
Squer pipe size: 30x30, 40x40, 40x20, 20x38, 30x40, 60x40, 70x30, 80x40, 60x60 more
|
|
1
|
|
8
CNC double profiling system Fabr. RAS Type 22.50
Built in 2001
consisting of:
A)
Double profile forming machine RAS Type 22.50
Built in 2001
Number of stations 2 x 7
Run-through speed 12 / 24 m/min.
max. sheet thickness 1.5 mm
max. profile height 20 mm
Power requirement Drive motor 5.5 / 7.8 kW
Power requirement Adjustment motor 0.37 kW
B)
Coil lift FORSTNER type SHT 5000/1,5
Built in 2001
Capacity 5.0 t
Lifting height 850 mm
Height 450 mm
W02ds
Platform size 1050 x 700 mm
Lifting time approx.... more
|
|
15
ROLL FORMING PLANT
3 ROLL FORMING MACHINES
PRODUCING: PIPES AND SQUARE PROFILES
MADE IN ITALY
Bhljvowber more
|
|
15
Erw steel tube mill roll forming machines
( Quantity : 6 machines & Tools )
(Tools : many and many roll sets and others.)
Tube Mill Line : L-B ( Quantity : 1 machine )
Description: Tube max dia 101,6mm x 3mm wall thickness, production speed 40-60 m/min (upgrade possibility)
Beznmkghak
Including:
1) 1x uncoiler (max coil dia 1800mm), 1x manual cut off saw, 1x leveller, 1x welder
2) 1x tube mill (490mm between housings, 70mm shaft dia.) fitted with 7x Pre-forming stands, ABB 356Kw main motor... more
|
|
1
Compact, lightweight and dismountable. This machine is suitable for all difficult to access construction sites or small workshops. Broken down it can be worn by a person. The machine consists of 4 components and is mounted in a very short time and ready for use. For Doppelstehfalzprofil with a folding height of 25 mm. At one side. Continuous oblique, conical or pass flocks can be profiled.
Infeed width 230-700 mm
Profiling speed 8 m / min
Machine weight: 139 kg
Overall dimensions 1220 x 1250 x ... more
|
|
9
Technical Details :
ITALY Tube mill for Steel and Galvanised tubes.
-2007 completely overhauled
Thickness: 0.5 to 2.5 mm
Bgxwzqoevd
Max. Speed - 80 m/min.
Welding section - 100 kw
Tube range - 16 - 36 mm
Size of moulds:
Round pipe: 16, 18, 21, 26, 28, 32,
Squer pipe size: 14×14, 17×17, 11×16, 20×14, 20×20, 25×25, 30×30
Line was reconditioned in 2007 more
|
|
7
STOCK NUMBER : 13120
Machine: Rollforming line for profiles
Manufacturer : Hebei Yufa Tile Press Equipment Co. Ltd
Location : Greece
Condition : NEW MACHINE NEVER WORKED WARRANTY IS VALID
Secification
Raw material Type : GI Steel
Thickness : 0.6MM
Yield strength: 240Mpa TO 350Mpa
De-coilerOperation Manual
Weight capacity 6tons
Main body
Roller station 15roller stations
Diameter of shaft 55mm
Material of shaft 45#steel with 0.05mm chrome
Material of rollers 45#steel with 0.05mm chrom... more
|
|
8
1992
excellent (used)
Band width: 500 mm
Band thickness: 1 mm
Number stations 14 pieces, roll forming system consists of conveyor, straightening machine and press brake CNC ERMAK (CNCHAP 4100 x 20).
Price 48 000 EUR for the complete Linie.Teile are also available separately.
Bdhcgs98wd more
|
|
4
PRODUCTION LINE for LOW TRAPEZOIDAL SHEETS
Beyf0kdl2s
MANUFACTURER - LENORD+BAUER, GERMANY /
OVERHAULED in 2009
*** LINE IS DISMANTLED
PURPOSE – production of trapezoidal profiles for roof and wall installation ( including condensation-stop )
TRAPEZOIDAL PROFILES SIZE – 35/207; 40/183; 50/250, with length up to 18 m
MATERIALS for PRODUCTION – coils S320GD+Z; width 1230 ( 1250 ) mm; weight up to 10 tons; internal diameter of the coil 509 ( 610 ) mm; thicknesses: 0,75; 0,88; 1,00; 1,25; 1,50 m... more
|
|
4
ELECTRICAL CHARACTERISTICS
- Standard power supply : 480 V / 50 Hz
- Abrasive belt motor : 7,5 Kw - 2 Poles
- Abrasive belt oscillation motor : 0,5 Kw - 8 Poles
- Lifting - approaching motor : 0,25 Kw - 4 Poles
- Head inclination motor : 0,12 Kw - 4 Poles
- Electropump (Optional) : 0,18 Kw - 2 Poles
- Total installed power: ~ 11 Kw
OPERATING CHARACTERISTICS
Abrasive belt development : 3.000 x 150 mm
Head inclination : 30° (15° per parte)
Output capacity : SEE FEEDING MACHINE
Working capacity : ... more
|
|
9
make Metz Industrie-Design GmbH
stations 9
center distance horizontal 100
center distance vertikal 72
working width 80
shaft diameter 32
hydraulic cutting unit yes
straightening installation triple
tape entry adjustable
actuation with frequency converter 3 kW
Existing roller set allows you to produce split tubes of diameter 10 mm, max. wall thickness 1.5 mm.
By minor changes also round pipes without welding seam may be produced. Welding equipment would have to ... more
|
|
6
Stock number 1382
Rollforming Line Bradbury
Bayd3qicvg
Equipped for the production of trapezoid profiles according to the attached drawing. (Roof sheets)
Machine location Greece Fully operational line more
|
|
4
PRODUCTION LINE for LINER TRAYS
MANUFACTURER - IL KWANG METAL FORMING CO. LTD, KOREA / 2009
*** LINE IS DISMANTLED
Nmqht
PURPOSE – production of liner trays for wall installation ( including acoustic trays )
LINER TRAYS SIZE – 100/600; 120/600; 145/600, with length up to 18 m
MATERIALS for PRODUCTION – coils S320GD+Z; width 885; 925; 945; 975 mm; weight up to 10 tons; internal diameter of the coil 509 ( 610 ) mm; thicknesses: 0,75; 0,88; 1,00; 1,25 mm
LOAD BEARING CHARACTERISTICS – according ... more
|
|
6
The line contains:
- Sheet Forming Machine (8 stations)
- Conveyors
Vrzv3i
- adevice for applying a two component glue
- Sheet and insulation joints
- Panel cutting machine
Tech. Data :
- Thickness of sheet- 0,3 - 1,3 mm
- Capacity - 800m2 /8h
- Power - 26 kw
- Insulation type - Styrofoam, stone wool, glass foam, although foam
-For more information please contact us more
|
|
5
The machine is particularly suitable for the production of profiles with large radii (machining can then be done horizontally).
7 stations, expendable to 8 stations, stations are arranged vertically
axle distance 160mm
station distance 400m
working width 150mm
Be0pyay82u
shaft diameter 50mm
included component parts: straightening installation, adjustable cutting table to setup cutting installation, tape entry with adjustable head, control cabinet, actuation unit (approx. 15KW via frequency conv... more
|
|
6
Brand - Uwaga ( Czech Republic)
Tile roof sheet forming line
Brand - Metal Produkt
Max. width - 1250mm
Max. speed - 12m/sec.
ALUMINIUM sheet thickness - 0,60 - 1,00 mm
Bqdc29vm
STEEL sheet thickness - 0,50 - 0,70 mm more
|
|
6
The line consists of 7 components and has only 4 workig hours !
1. MIC-STV2001™-UBM-240 Ultimate Building Machine
-date of manufacture 03/24/99
-serial number C990569DI
-V.I.N. 1M9RA3938XE408569
- The 16 to 34 meters range for the production of harnesses
2. MIC-STU2000®-UBM-120 Ultimate Building
Machine
-date of manufacture 02/09/99
-serial number B990540DI
-V.I.N. 1M9RA3037XE408540
-The 4 to 20 meters range for the production of harnesses
3. MIC-163 Flat Panel
-date of manufact... more
|
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Sheet metal working
Dealer for Sheet metal working
