Used sheet metal working centers for sale (35)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, 5 processing stations, Production width: 230 - 1250 mm, Production length: 500 - 2400 mm, Material thickness: 0.63 - 1.0 (1.5) mm, Material type: Steel 1203, bright, Mains voltage: 400 V 50 Hz, Power: 150 kW, Hydraulic pressure: max. 150 bar, Air pressure: max. 10 bar. Gedpox Thqwsfx Agbstt The control system has been renewed by SIEMENS.

Year of construction: 2022, condition: new, FIBER LASERS ByStar and BySmart are available in Lithuania and Latvia countries. NEW machine delivery time is less than 16 weeks! TECHNICAL data: Sheet sizes • Nominal sheet size: 3100 mm. X 1580 mm.; • Nominal sheet size: 4105 mm. X 2100 mm.; • Nominal sheet size: 6250 mm. X 2600 mm.; • Nominal sheet size: 8150 mm. X 2600 mm.; • Nominal sheet size: 12100 mm. X 2600 mm.. Godpohx Eghsfx Agbstt FIBER Laser source, POWER: • 3,000 W; • 4,000 W; • 6,000 W; • 8,000 W; • 10,000 W; • 12,000 W; • 15,000 W.; • 20,000 W. Please contact us by E-mail or phone call or leave your e-mail address in the message. Thanks

Year of construction: 1995, condition: used, Salvagnini bending system P4 Total length of the bending system Approx. 20 m Characteristics of the sheet Maximum thickness of stainless steel sheet foils with max. hardness HB=80: 1,5mm Maximum thickness of stainless steel sheet foils with max. hardness HB=150: 1,25mm Gtjdpfx Agomrtycjbjt Limit dimensions of the sheet foil packages at the entrance to the bending machine Max. Bending length: 2450mm Max. Bending height: 127mm The machine is currently inoperable because the already dismantled. A restart of the machine is not possible since then. The bending center had been in use in a large door factory. The sale is ex works: dismantled by us and loaded on a truck. The machine can be built up or used as a spare parts carrier

Condition: used, Year of construction: 2011, functionality: fully functional, RAS Multibend-Center - Fully automatic bending center - Very good refurbished condition - Complete tool set included; the upper beam tools are new - Bending cell with main manipulator, automatic tool changers for the upper beam and bending beam, automatic corner piece actuation, actuation for automatic up/down tools, mechanism for lowering the work surface upon arrival of the next sheet, set of fastening elements, main manipulator, feeder with stop, operator panel including touch PC, RAS Cell-Control software, emergency stop pillar, automatic tool changer with two independently operating gripper arms that fully automatically assemble the required upper beam tool length, grid pieces, adapter pieces, fixed corner piece, rotary base corner pieces - Images are sample images - Gtedpfx Agjx Iugnjbst

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Salvagnini Roboformer G2 DMP – Automated Press Brake Cell Location: Finland Availability: Immediately For sale is a fully automated Salvagnini Roboformer G2 DMP press brake cell, designed for efficient and high-precision sheet metal forming. The system includes robotic handling with loading, centering, sheet turning and off-loading stations, making it ideal for serial production and unmanned operation. General Information Brand: Salvagnini Model: Roboformer G2 DMP + RBF / KR / CMF40 / RF Category: Sheet metal machinery Subcategory: Press brake cell Year of manufacture: 2008 Country of origin: Italy / Netherlands Control system: Salvagnini Availability: Immediately Technical Data Maximum workpiece width: 4000 mm Equipment / Accessories Press brake: LVD 4000 Robot: KUKA KR 150 L110-2 Loading station: Yes Centering station: Yes Gtsdpsx H Av Ijfx Agbet Off-loading station: Yes Sheet turning device: Yes Additional Information Fully automated bending solution High productivity and repeatability Suitable for demanding sheet metal production 📌 Please verify technical details with the seller. 📩 Ask for a quote including delivery.

Condition: used, Year of construction: 2011, machine/vehicle number: 0401-250033, The Kaltenbach KF1606 sheet metal processing center for drilling and flame cutting flat steel and sheet metal. Godpfsxzfnajx Agbott The Kaltenbach KF 1606 flat steel drilling and flame-cutting machine is a model from the new generation of Kaltenbach KF sheet metal processing centers. This Kaltenbach KF 1606 model is characterized by a new CNC control, a new gripper measuring system, higher drive power and improved cutting quality.

Condition: used, Year of construction: 2017, operating hours: 4,032 h, functionality: fully functional, TCI BP-C 4020 Combi Excellent condition Still in daily use and can be inspected under power at any time Cutting area 4000x2000 Plasma 130A Many wear parts included Additional stainless steel grid table for cutting aluminium and stainless steel sheets Gtsdjxtu E Eopfx Agbst

Condition: ready for operation (used), Year of construction: 2004, operating hours: 40,000 h, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, working width: 2,780 mm, working height: 1,090 mm, TECHNICAL DETAILS Max. sheet length: 2,780 mm Max. sheet width: 1,500 mm Max. bending length: 2,550 mm Sheet thickness (stainless steel): 2.5 mm Max. flange height: 185 mm Sheet thickness (aluminium): 3.0 mm Max. bending angle: ± 135° Working height: 1,090 mm MACHINE DETAILS Dimensions & Weight Dimensions: 12,500 x 7,400 x 2,600 mm Approximate machine weight: 19,000 kg Total power requirement: 43 kW Operating hours: 40,000 h EQUIPMENT Automatic/manual loading via PCD Gtjdpfsxxp Ekox Agbot Automatic loading system with lift table Automatic bending center P4-2516 Automatic tool setup ALA, symmetrical CLA Semi-automatic unloading of finished parts via SAP

Condition: used, Year of construction: 2010, 2 Number of axles 4 St. Gsdsqn A Rkspfx Agbjtt tool taper HSK 63 toll turrets 60 weight 9600 kg

Condition: used, Year of construction: 2014, functionality: fully functional, MiniBendCenter RAS 79.05 Fully automatic panel bending center for small parts - General Information: Direct from manufacturer Manufacturer’s warranty Maintenance included Latest possible software version - General technical data (in mm): Blank length: 50–600 Blank width: 40–600 Sheet thickness max. (400 N/mm²), tool-dependent: 3.0 Upper beam stroke max.: 500 mm Minimum flange height (reference value, tool-dependent): 5 × s Max. flange height: 127 Weight of bending cell: 10 tons Weight of enclosure and electrics: approx. 2,027 kg Weight of machine elements: approx. 945 kg - Machine-specific data: Motor operated; 400V, 50/60 Hz, 3-phase Year of manufacture: 2014 Condition: Refurbished – good used condition - Machine Configuration: Bending cell: - Automatic sheet thickness adjustment - Automatic tool clamping - Blank scanner Main manipulator: - 3 servo motors for X, Y, Z axes - 1 servo motor for lower rotary axis + separate drive for rotary axis - Double sheet detection Tool changer: - 3 servo motors for X, Y, Z axes - 1 pneumatic swivel drive for rotary axis - Tool gripper - Two-level tool magazine - Automatic tool clamping in tool magazine Enclosure: - Bending cell, front and rear Mobile operating panel: - 18" Touch & More control Intelligent loading robot Combined camera-scanner system Analysis software Transfer table, Sauerfeld (52x9 mm) suction row (7x20 mm) Pallet station: - Roller conveyor and heavy-duty chain conveyor - 1 position for new pallets (parts to be processed) - 1 position for "pallet in process" - 2 positions for finished pallets (empty or with remaining parts) Curved transport conveyor with 6 connection stations Finished part output enclosure Complete tool set RAS CAM-Office software incl. SolidWorks license and 2-year maintenance contract - Sample images Gtsdpfsx Hyhujx Agbst Sample video available on request -

Condition: used, AUTOMATIC SHEET METAL BLANKING AND BENDING LINE – USED – CE CERTIFIED Brand: CIMSA – Made in Italy Material Specifications • Material: Fe P01 – galvanized – pre-painted • Thickness: 0.6 – 2 mm • Maximum dimensions: 1000 x 2000 mm Line Dimensions • Total length: 25 meters + robot • Maximum width: 6.8 meters Line Composition Godpjxv Th Refx Agbott • Motorized decoiler model SMC 100 • Straightening unit model CR 1000 • Electronic feeder model AP3 1000 • Punching unit consisting of 13 cylinders and 18 punching groups controlled by CNC • Tool change device • Press 60 tons, width 1000 mm, 50 kW, complete with: - die insertion trolley - sheet metal support - scrap evacuation conveyor belt • Blade change system on the shearing station • Platform with piece translation and tilting system • Transfer station adjustable in width by handwheel • Flipping device for piece turnover • Longitudinal positive/negative bending station • End positive/negative bending station Automation: ABB robot for automatic piece unloading

Condition: good (used), Year of construction: 1990, Rolled metal uncoiling, cutting and coiling line LTs. Line 1300mm/3mm. for precise cutting. For uncoiling, cutting metal, cutting into smaller rolls, coiling into small rolls. The line was bought new, owned by one owner, serviced on time by LTs representatives. The machine is connected and can be tested at any time in Vilnius, Lithuania. The LTs 1300/3 cutting line consists of: Uncoiling decoiler Multi-blade scissors Stop and cut-off segment Spinner with separator Trolley Wardrobe with control panel Technical specifications: Gtjdpfxepbwaps Agbjt Metal width: 1250 mm. Thickness: 700 mm. Diameter min.: 508 mm. Diameter max.: 620 mm. Outer circle diameter: 1200 mm. Maximum weight: 7 T. Width of cut strips min.: 75 mm. Cut tape max. width: 1250 mm. Supply voltage: 3 x 380 V. Power: 18 kW. Made in: Poland Year: 1990 If you have more questions, welcome.

Condition: used, Year of construction: 2009, operating hours: 60,000 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 2 mm, total width: 3,990 mm, The machine is well maintained Gedpfx Agsxiv Tpobjtt

Condition: excellent (used), Year of construction: 2002, RAS Multibend Center 79.22 Automatic cnc FOLDER / Panel bender Gtjdpfxerxt Axe Agbet Year 2002 Specifications • Working Length: 2160 mm/ 7.09’ ft. • Maximum Sheet Metal Thickness: Steel – (400N/mm2) 2.0 mm • Maximum Sheet Metal Thickness: Stainless Steel – 1.5 mm • Maximum Sheet Metal Thickness: Aluminum – 3.0 mm • Maximum Development Sheet Width: 1500 mm/ 4.92’ ft. • Maximum Four-Sided Fold Height Max: 203 mm • Bending Blade Reach: 180 ° Degrees • Machine Width: 5500 mm approx./ 18.04’ ft. approx. • Machine Length: 7000 mm approx. / 22.97’ ft. approx. • Machine Height: 2500 mm/ 8.20’ ft. Power: 18 kW Frequency: 50hZ Pressure: 6 Bar Weight: 21,000 kg/ 46,297 lbs. approx.

Condition: used, Year of construction: 2006, x-travel 1300 mm y-travel 610 mm Gtodpfx Aeud Trdogbst z-travel 600 mm taper Aufnahme 50 Axis 3 control Heidenhain 530 ja 20

Condition: ready for operation (used), Year of construction: 2004, operating hours: 40,000 h, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, working width: 2,780 mm, working height: 1,090 mm, TECHNICAL DETAILS Max. sheet length: 2,780 mm Max. sheet width: 1,500 mm Gtjdpfx Aoxhfbtjgbst Max. bending length: 2,550 mm Sheet thickness (stainless steel): 2.5 mm Max. flange height: 185 mm Sheet thickness (aluminium): 3.0 mm Max. bending angle: ± 135° Working height: 1,090 mm MACHINE DETAILS Dimensions & Weight Dimensions: 12,500 x 7,400 x 2,600 mm Approximate machine weight: 19,000 kg Total power requirement: 43 kW Operating hours: 40,000 h EQUIPMENT Automatic/manual loading via PCD Automatic loading system with lift table Automatic bending center P4-2516 Automatic tool setup ALA, symmetrical CLA Semi-automatic unloading of finished parts via SAP

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 61,953 h, machine/vehicle number: 035100300072, control type: CNC control, degree of automation: automatic, actuation type: mechanical, controller manufacturer: SIEMENS, controller model: SINUMERIK OP 010S, laser type: fiber laser, laser source manufacturer: IPG, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, table length: 3,200 mm, table height: 100 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 180 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 12,000 kg, total length: 7,830 mm, total width: 8,217 mm, year of last overhaul: 2023, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, ADILAS is a combined machine for laser cutting of carbon steel sheets (also known as mild steel), stainless steel, aluminum alloys, brass, and copper. The machine is equipped with: • A table change system that allows loading of a new sheet during the cutting process. Gtedswyuruopfx Agbjt Unloading of the processed parts takes place: • By means of the table not used during machining; once this table has been emptied, it will be used for loading the new sheet.

Condition: repair required (used), Sheet Metal Processing Unit, Decoiler, Straightener, Guillotine Shear, Reinhardt Maschinenbau GmbH Ras 228.60 Used Machine Gtsdpfjvkbrqsx Agbot Manufacturer: Reinhardt Maschinenbau GmbH Model: Ras 28.60 Maximum Sheet Width: 1500 mm Maximum Sheet Thickness: 1.5 mm Total Weight: 9350 kg Features: Decoiler Measuring Unit Sheet Straightener Guillotine Shear Electrical Data: Voltage: 400 V Power: 12 kW Frequency: 50 Hz Current: 35 A Note: The control panel display is not functioning.

Condition: used, Year of construction: 2014, operating hours: 8,900 h, functionality: fully functional, machine/vehicle number: P4 3125, Salvagnini panel bender P4 3125 Gedpoxup Tmjfx Agbott

Condition: excellent (used), Year of construction: 2002, RAS Multibend-Center RAS 79.26 Year 2002 Gjdpfx Agorxt Hqsbott Used RAS Multibend Centre CNC Folder Max working 2560mm Max sheet thickness (mild steel) 2.0 (2.5mm) Max sheet thickness (stainless steel) 1.5mm Max sheet thickness (aluminium) 3mm Finished part length min. (w/o corner tools) 200/250mm Finished part length (w. small corners) 380/430mm Finished part length min (w. large corners) 430mm / 480mm Finished part width min. (inside) 150 (140mm) Finished four sided part height max 203mm Side free space corner tools (small/large) 30/ 50mm Folding beam travel range 180 Deg Working height 1000mm Machine width 7700mm Machine length 5800mm Machine max height 2400mm Weight approx 17000kg Drive power 25kw

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 121-C6218406, type of input current: three-phase, Finn-Power C6 — Turret Punch Press (2006) Godpfx Aexb R Npogbstt Automatic tool change High positioning accuracy Compatible with automation systems Suitable for serial production of metal parts

Condition: good (used), Year of construction: 1995, Calender with 3 rollers Fasti Gtsdpsf Slq Sjfx Agbjt main features: Length 1860 Sheet metal thickness max. mm. 0,75 Upper roller diameter mm. 40 Several LED ceiling light templates

Condition: excellent (used), Year of construction: 2000, Programmable and automatic machine for the production of sheet metal panels by forming multiple bends on all four sides. Gtodpfx Ajw A Nnpogbot

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 3 mm, overall weight: 15,000 kg, input voltage: 400 V, bending angle (max.): 180 °, working length: 3,200 mm, working range: 3,200 mm, Equipment: documentation/manual, safety light barrier, Technical features: Year 2013 Working length 3200 mm Gtjdpowq Rumofx Agbjt Maximum sheet thickness (iron 400 N/mm2) 3.00 mm Maximum sheet thickness (stainless steel) 2.00 mm Maximum sheet thickness (aluminum) 4.00 mm Maximum bending height on four sides 250 mm Upper jaw stroke 650 mm

Condition: excellent (used), Year of construction: 2001, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, working width: 1,850 mm, working range: 1,850 mm, 1 Used Salvagnini cnc automatic panel bender for sale cnc folder P4.1812 Servo-controlled panel bender LS Upper bending blade LI Lower Bending blade MLA.ZR Manual length Adjustment of Blankholder CLA Long Tab Bending Unit Gjdpfx Agowb E Uvobjtt HP12015 R81 Chiller Max. length at entrance: 1850mm. Max. width at entrance: 1500mm. Minimum length at entrance: 285mm. Minimum width at entrance: 190mm. Maximum diagonal: 2150mm. Maximum width at exit: 1500mm. Maximum reference dimension: 2000mm. Minimum sheet thickness: S min: 0,50mm. Maximum sheet thickness, Mild Steel (max. 410 N/mm2): Max: 2,00mm Maximum sheet thickness, Stainless steel (max. 600 N/mm2): Max. = 1.25mm Processing of pre-painted material Smax= 3,00mm. Maximum tool length for CLA option: 1000mm.