Used notching machines with fixed angle up to 4mm for sale (25)

Condition: used, Year of construction: 2000, plate thickness 3 mm blade length 225 x 225 mm cutting angle 90 ° throat 110 mm strokes per minute 45 total power requirement 2,5 kW weight of the machine ca. 0,9 t Hnjlhcexyacpscqnjr dimensions of the machine ca. 1 x 1 x 1,2 m

Condition: ready for operation (used), Blade length: 130 x 130 mm Cutting length: 130 mm Max. cutting capacity at 45/70 kg strength: 3/2 mm Hnjlhceznh Ivecqnjr Cutting angle: 90° Stroke rate: 50/min Table dimensions: 460 x 600 mm Space required: 650 x 600 x 1250 mm Weight, approx.: 170 kg

Condition: new, Year of construction: 2026, Notching machine Boschert LB12/4 Machine color: Blue RAL 5017 Hjlhccofgq Uijqnsnr Cutting angle: 90° Cutting capacity: 4 mm St42 steel 3 mm stainless steel Connected power: 4 kW Weight: 760 kg Machine equipped with 2 stops, including a movable stop bar (300 mm) Internal stop for cutting strips up to 225 mm Plexiglass guard CE certified and new machine warranty

Condition: used, functionality: fully functional, Year of construction: 1992, sheet thickness steel (max.): 4 mm, cutting length (max.): 225 mm, Notching machine Boschert LB12 Super Machine color: Reseda green RAL 6011 Cutting angle: 90° Cutting capacity: 4 mm St42 steel 3 mm stainless steel Connected power: 4 kW Weight: 850 kg Machine equipped with an extra-large machine table with double T-slots parallel to the blade, as well as an additional T-slot at the front of the table, at a 45° angle to the blade 2 stops with a sliding stop bar, 500 mm Internal stop for cutting strips up to 225 mm Plexiglass guard Hjlhccjwfymzoqnenr Drive via Flender gearbox-brake motor Used machine, fully functional, in very good condition

Condition: used, functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 4 mm, cutting length (max.): 225 mm, Boschert Notching Machine Type LB14 Station 1 Fixed angle 90° Cutting length 225x225 mm Adjustable cutting length Cutting capacity 4 mm St40/ 3 mm V2A Station 2 Indentation cutting 100x25 mm Adjustable cutting length Used machine in very good condition Refurbished Hjlhcewfymnscqnonr Built in 2000

Condition: new, plate thickness 2,0 mm tube diameter 60,0 mm Hslhccew U U Tyeqnonr motor 400 Volt

Condition: good (used), Notching machine, sheet metal notcher, notching shear, corner notching machine, corner shear, corner shear -Max. cutting capacity: approx. 2 mm Hslhccodf U S Aoqnonr -Blade length: 102 mm -Dimensions: 620/590/H1790 mm -Weight: 150 kg

Condition: good (used), Rung and miter punch, rung punch -Manufacturer: Rammefabriken, mechanical corner punch -Intermediate dimension: 100 mm -Adjustment depth: 65 mm -Dimensions: 1700/600/H1080 mm Hslhsif Hureccqnenr -Weight: 118 kg

Condition: used, Notching Machine COMACA type N/EPAS Maxi Sheet thickness: 3 mm Table size: Length 1050 mm x Depth 700 mm Ends tables dimensions: 900 x 470 mm Throat depth: 110 mm Orientable stop Blade length: 225 x 225 mm Voltage: 380 V Hnjlhezku D Noccqnsr Total length with ends tables: 2900 mm Length: 1200 mm (with retreated ends tables) Depth: 800 mm Total height: 1100 mm Weight: approx 1 T

Condition: new, Year of construction: 2013, plate thickness 1,6 mm pressure 450 MPa 150 x 150 x 90° table surface area 650 x 500 mm 875 mm cutting angle - upper blade 4 ° weight of the machine ca. 0,075 t • manual notching machine with lower frame • sheet thickness: - steel 450MPa to 1.6 mm, - aluminium to 2.25 mm, - plastic to 3.0 mm, Helhccqst Smgxonenr • machine for demonstration

Condition: used, Year of construction: 1990, Technical details: plate thickness: 8 mm Hnslheu Ictboccqnjr cutting range: 300 x 300 mm table-size: 1100 x 900 mm voltage: 380 V / Hz Weight approx.: 1,7 t dimension machine xH: 1,3 x 1,2 x 1,5 m For notching of 90° sheet metal segments, works hydraulically. On the table are 2x rulers 300mm 90° offset. T-slot according to DIN 680: a=12mm, h=21mm, b=22mm, c=14mm with length = 1x 330mm and 2x 700mm Operation via control panel and foot switch *

Condition: good (used), Year of construction: 1980, machine/vehicle number: PN 0312, Offer 26138 Technical data: - 90° cutting head, pneumatically operated - Cutting thickness: - Normal steel: up to 2 mm - Stainless steel: up to 1.5 mm - Aluminum: up to 3 mm - Blade length: 130 mm - Table size: W 600 x D 380 mm Hnslhccjy U Hv Ueqnsr - Working height: 940 mm - Foot pedal - Compressed air requirement: 6 - 8 bar - Space requirement: approx. W 600 x H 1250 x D 850 mm - Weight: approx. 180 kg

Condition: new, Year of construction: 2026, Suitable for Outer pipe diameter Ø 26.9(3/4″) Ø 33.7(1″) Ø 42.4(1_¼") Ø 48.3(1_1/2″) Ø 60.3(2″) Outer pipe diameter for zinc spout Ø 22 - Ø 76 Advantage: Quick and easy notching Helhccqsy T Rauonenr Wall thickness (steel): 5 mm Wall thickness (stainless steel): 3 mm Weight: 93 kg Operation: Electric (2.2 kW) Application: Round, square and rectangular tube Easy to operate With the motorized pipe notcher AL1-2U you can notch pipe outside diameters of Ø26.9 (3/4″), Ø337 (1″), Ø42.4 (1 ¼"), Ø48.3 (1 ½"), Ø60.3 (2″) and pipe outside diameters for zinc flow from Ø22 to Ø76. The machine is started at the push of a button and the pipe notcher is driven continuously. This allows the user to continue production without having to switch the machine on every time. Electrically driven With the motorized pipe notcher AL1-2U you can notch pipe outside diameters of Ø26.9 (3/4″), Ø337 (1″), Ø42.4 (1 ¼"), Ø48.3 (1 ½"), Ø60.3 (2″). Do you often notch pipes? Then the motor-driven pipe notcher AL1-2U with 2.2 kW electric motor is the solution for you! The motor forms a single unit with the special eccentric shaft that drives the punching tool. In addition, the motor is equipped with an on/off switch with 0-voltage protection and a protective cap.

Condition: ready for operation (used), Notching machine, COMACA Type 130/3mm -CE marking -Well-maintained original condition -Cutting angle 90 degrees -Work table 600x460mm -Cutting capacity 130mm -Cutting capacity 3mm / sheet thickness -Stroke rate 50-60 strokes per minute -Work table with T-slots/scale/adjustable angle stops -Foot pedal Holsy T I Ngshccqnjnr -Safety device Dimensions: L x W x H 0.7 x 0.7 x 1.3 meters / Weight 250 kg Errors and omissions excepted.

Condition: used, Year of construction: 2012, gebraucht 2012 9690F prompt, Zwischenverkauf v China 690 € 1 Helhccsynm Ddoqnenr 100 mm 3 mm 90 ° 90 kg Adjustable stops on both sides Finger guard

Condition: new, Year of construction: 2025, neu 2025 090086 prompt, Zwischenverkauf v Türkei 7400 € 142.82 € 1 197 mm 4 mm 2 mm 20 1/min 90 ° Hnelhewiqmmoccqnjr 4 kW 890 mm 780 mm 1115 mm 550 kg Hydraulic drive Automatic adjustment of the blade gap 2 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to "CE" regulations User manual in English or German

Condition: used, Year of construction: 1984, plate thickness 4 mm ST plate thickness 3 mm VA blade length 225 mm engine output 3,5 kW weight of the machine ca. 650 kg Hjlhcsxqhp Ejcqnenr dimensions of the machine ca. 1250 x 900 x 1100 mm Features: - 2x miter stops - 90° fixed angle - Foot switch

Condition: used, Manual Lever Corner Notcher BERNARDO Type AK100 Manual Notching Machine Serial No. A17010320 Year of manufacture 2017 Blade length: 100 mm Material thickness at 40 kg/mm²: max. 3 mm Notching angle: 90° Stroke: 28 mm Hnelhjyhq Aqeccqnjr Table size: 380 x 280 mm - Adjustable stops - Lever arm length: 650 mm, 500 mm bolt-on extension missing Dimensions (L x W x H): 380 x 380 x 1000 mm (with 650 mm lever) Net weight: 90 kg Good condition

Condition: used, Max. sheet thickness: 4 mm steel, 3 mm stainless steel Hnelhju Hy N Doccqnsr Blade length: 250 mm Strokes per minute: 52 Weight: approx. 900 kg knife sharpened Depth stop

Condition: new, 3.0 mm ST 40 2.0 mm VA 90.0 Grad blade length 130 x 130 mm table: 640 x 460 mm work height max. 900 mm engine output pneumatisch weight 200 kg range L-W-H 600 x 670 x 1270 mm Properties: - Notching with burr-free cut, without deformation of the cutting edges - Machine body made of high-quality gray cast iron, base made of sheet steel - Cutting blades made of surface-hardened tool steel - Effortless work thanks to pneumatic drive - Operation using a foot pedal, so both hands are free for the workpiece - Large work table with integrated scales - T-slots for precise guidance of the pivoting stops - Protective cover in front of the cutting blade for high safety Scope of delivery - 1x set of cutting blades Helhccexcuxkeqnjnr - 2x pivoting material stops - Plexiglas protective cover - Foot pedal - Base frame

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 87.0 kg. The AL1-2E electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continue to work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2E pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). Do you often notch pipes? Then the electrically driven AL1-2E pipe notcher with the 2.2 kW electric motor is just right for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electric motor pipe notching machine - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm Helhcexaardscqnsnr - operating instructions

Condition: new, Cutting capacity --- 1.6 mm Cutting range --- 152 x 152 mm Cutting angle --- 90° Stroke --- 20 mm Working table --- 450 x 300 mm Packaging size --- 550 x 500 x 550 mm Hnolhccqewmgltener Weight --- 95 kg

Condition: new, plate thickness 1,6 mm 4 t Hnelhccqjftd Uasnsr blade length 156 mm angle adjustable from - to fest Grad table surface area 450m x 305 mm total power requirement Handbetrieb kW weight of the machine ca. 95 Kg Dimensions (LxWxH) 530 x 380 x 480 mm

Condition: used, Year of construction: 1992, machine/vehicle number: 27123, Offer 25466 Technical Data: - Cutting length up to 125 mm Hnjlhccqjyfchgensr - Cutting thickness - at 400N/mm² tensile strength: 4 mm - at 700N/mm² tensile strength: 2.5 mm - Aluminium, plastic: 6 mm - Cutting angle: 90° - Depth stops - Foot pedal - Space requirements approx. W 700 x H 1400 x D 800 mm - Weight approx. 150 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: V 254629, Offer 25311 Technical Data: - Cutting length: 250 mm - Cutting angle: 90° - Cutting capacity: - Mild steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm Hnelhoxqzirjccqnor - Stroke rate: up to approx. 55 / min - Table size: W 800 x D 800 mm - Working height: approx. 940 mm - Stops infinitely adjustable in length and angle - Drive: 400 V / 4 kW - Oil filling: 50 l - Electric foot pedal - Required space: approx. W 1300 x H 1250 x D 1300 mm - Weight: approx. 800 kg - Mobile base frame