General Data
Measurements width 2850 mm
Measurements depth 4000 mm
Measurements height 2000 mm
Control Unit
Model Windows XP
Main Drive
Punching force 300 kN
Maximum sheet thickness 8 mm
Movement
X-Axis Movement 2000 mm
Y-Axis Movement 1250 mm
This Euromac ZX 1250/30 Turret Punching Machine was manufactured in Italy in the year 2009. It has been working for 13512 hours, of which 5741 are hydraulics on time. It is operated through a Windows XP system. This machine works with a punching force ...
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch
-Shearing tool for channel steel: 50 mm
-1x dimensions: 140/140/H30 mm
0xdcuqdh
-1x dimensions: 135/135/H30 mm
-Weight: 8 kg
mechanical ja
number of tools 7
weight of the machine ca. 1 t
Nnc3p
Parts shown by hand not come.
Svau3o
Punching force: 300 kN For example, punch a 20 mm hole in 12 mm steel Stroke release via foot switch Large support table with stops Assortment of tools is included in the price
Oy8it
punching pressure 28 t
punching cross-cut in cmm 31 in 7 mm
round bar steel 32,0 mm
throat 250 mm
dayligth 223 mm
no. of strokes 10 - 30 Hub/min
oil volume 32 ltr.
work height max. 1.033 mm
total power requirement 3,0 kW
weight of the machine ca. 553 kg.
dimensions of the machine ca. 730 x 540 x 1530 m
Furnishing:
- Quick-change punch device up to Ø 31 mm - green series -
- built-in: round punch no.5 Ø 25.0 mm and round die no.3 Ø 25.7 mm
- Free: LED lighting in the punching area
- swiveling ...
General Data
Measurements width 4840 mm
Measurements depth 3880 mm
Machine weight 8800 kg
Main Drive
Punching force 220 kN
Maximum sheet thickness 5 mm
Movement
Bwzvay3evp
X-Axis Movement 2500 mm
Y-Axis Movement 1500 mm
This Euromac MTX Flex 6 Hybrid Turret Punching Machine from 2014 was manufactured in Italy. It has an overall working time of 19803 hours, of which 12495 are hydraulics on time. Operated through a control unit of the same brand. This machine works with a punching force 220 kN....
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch
-Shearing tool for channel steel: 120 mm
Hsl8b2f
-Type: 441215124901
-Type: 441215124902
-1x dimensions: 215/205/H30 mm
-1x dimensions: 210/220/H30 mm
-Weight: 19 kg
Amada Vipros 255.
Fanuc 18P control.
Year of manufacture 2001.
Bwypqbkzts
31 station turret.
200kn punch force.
light guards.
Machine is in excellent condition and has been maintained by Amada engineers from new.
punching cross section in mm²: 45 kp/mm²
table-size: 120x100 mm
throat: 80 mm
weight of the machine ca.: 15 kg
space requirements of the machine approx.: 0,3x0,2x0,95 m
Punching Press
Mxjmf
7
1. punching machine, manufacturer: INDUMASCH, type: IS 20-400, punching force: approx. 25t, incl. various punches, own weight: approx. 1.500 kg
Bwoavqkaqc
pressure 35,0 t
punching cross-cut in cmm 28,0 in 10,0 mm
stroke 72 p./min mm
throat 203 mm
stroke - stepless adjustable 24 mm
punching cross-cut in cmm 23,0 in 12,0 mm
total power requirement 1,5 kW
weight of the machine ca. 330 kg.
range L-W-H 750 x 350 x 1500 mm
** from a maintenance workshop
** very good condition (!!)
Furnishing:
- electric punch with rotary wedge coupling
- Smooth grain search device
- punching device
- die base
Bvl0xwlfjo
- underframe
- Connection cable with 16a plug
...
General Data
Measurements width 7500 MM
Measurements depth 2200 MM
Machine weight 9000 kg
Control Unit
Brand SIEMENS
Bvzmdas2tr
Model SINUMERIK
Main Drive
Punching force 250 kN
This Finn-Power RS 1000/38 Punching Machine was manufactured in the year 1993 in Finland. It has a record of 48001 working hours. This punching machine with angle shear, night train and separate output stations is operated through a SIEMENS SINUMERIK control unit. It can work with a punching force 250 kN.
Application ...
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch
-Shearing tool for U-steel: 100 mm
-Type: 441215124801
-Type: 441215124802
-1x dimensions: 215/205/H30 mm
-1x dimensions: 210/220/H30 mm
-Weight: 19 kg
Q3whapg
Type: VIPROS 367
Year of construction: 1992
Weight: 14.000 kg
Capacity: 30 t
Further data and videos of the machine are available on request.
Bwnym2v3uk
The machine is still in operation until week 37/2021.
A visit is possible after prior appointment.
Changes / errors in the technical data and subject to prior sale.
The MMV Group offers you especially for our products the right financing.
Calculate now with MMVfinrate easily online your desired monthly rate.
On request you will receive your pe...
punching pressure 16 t
plate thickness 8 mm
plate length max. 1250 mm
Benrnsdonm
sheet width - max. 1000 mm
engine output 13 kW
control Cadman CNC
voltage 400 V
weight of the machine ca. 8,3 t
dimensions of the machine ca. 3600 x 2300 x 2000 m
7
1. motor punching machine, manufacturer: PEDDINGHAUS, type: FORAX 25, machine number: 4220054879016, punching force: 25t, own weight: approx. 300 kg
I80n0bu9w
stamp capacity 2 - 63 mm
throat 110 / 200 mm
Various Destaco punching iron, some with accessories:
No. 1 & 2: Type 101-200, accessories: one punch + one die, technical data:
see picture, price per piece: 150,-
No. 3 & 4: Type 102-200, accessories: approx. 12 sets of punches and dies,
technical data: see picture, price per piece incl. accessories: 350,-
No. 5: Type 104-200, accessories: 2 punches and 3 dies, technical data: see
Picture, price: 350, -
No. 6 & 7: Type 103-200, accessories: appro...
Control Unit
Model AMNC-F
Main Drive
Punching force 200 KN
Movement
X-Axis Movement 5000 mm
Y-Axis Movement 1250 mm
This AMADA EM 2510NT Turret Punching Machine was manufactured in Japan in the year 2007. It is equipped with a AMNC-F control unit. This machine works with a punching force 200 kN.
Application Types
Punching
Btzchgresp
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch
-Shearing tool for square steel: 25/40/50 mm
-Shearing tool for round steel: 25/40/55 mm
-Type: 4412151064
-Type: 4412151063
-1x dimensions: 220/206/H30 mm
-1x dimensions: 215/205/H30 mm
-Weight: 16 kg
Ypnnmdqxa
pressure 20 t
table-size 1000 x 650 mm
stroke 40 mm
throat 400 mm
punch diameter max. 90 mm
plate thickness max. 6 mm
no. of strokes max. 200 Hub/min
total power requirement 4 kW
weight of the machine ca. 1,5 t
Cn30zll3
dimensions of machine L x W x H 1,41 x 1,1 x 1,6 m
Accessories: table extensions right and left side of table, each 500 x 150 mm;
stops on Y-axis with DRO ELGO Electric, tool cabinet with
various punches and dies
neu
ca. 8 Wochen ab Auftragse
Polen
6660
126.54
35 to
60 mm
27 mm
25x18 mm
5 s
13 mm
Ing02d2k
700 bar
379 mm
148 mm
335 mm
20 kg
MOBILE HYDRAULICS-POWERSTATION
Double action - fully automated process of punching and return
Wide range of hole diameters up to 27mm
Intelligent control system with inching and automatic load detection
Mode indicator light
Protection against accidental start-up
Wide range of special-shaped punches and dies
OPTIONAL:
Gantry punching station ...
8-fold row punching machine fabr. Hubert SCHULTE special machines Menden
machine no. 86023, year of construction 1987
technical data:
8 axially movable punching units, hydr. operated,
projection per punch 185 mm
table support surface per punch 200 x 280 mm
outside dimensions of the machine 6000 x 1400 x 1850 mm
with :
- 8 sep. hydr. aggregates make B&B, year 1987, order no. 78/1009,
flow rate 9 l/min, operating pressure 180 bar, capacity 30 l
- foot switch
- switch cabinet
used, in good condit...
PUNCHING FORCE: 30 ton
N. OF TOOL STATIONS: 15
MAX ADMITTED LOAD: 150 Kg
X-AXIS TRAVEL: 1550 mm
Y-AXIS TRAVEL: 1050 mm
STRIKES FOR MINUTE: 310-480
CONTROL UNIT: FANUC
WEIGHT: 8000 Kg
DIMENSIONS: 6000 x 4000 x 2450 mm
PRICE: To be defined
Phwsl
InStock
Control Unit
Model AMNC-F
Main Drive
Punching force 300 KN
Movement
X-Axis Movement 2540 mm
Y-Axis Movement 1000 mm
Bb8fkjwm
This AMADA EMK 345NT Turret Punching Machine was built in the year 2007 in Japan. It is operated through a AMNC-F control unit. This machine has a punching force 300 kN.
Application Types
Punching
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch
Dvaihe
-Shearing tool for U-steel: 65/80 mm
-Type: 441215124701
-Type: 441215124702
-1x dimensions: 215/205/H30 mm
-1x dimensions: 210/220/H30 mm
-Weight: 19 kg
pressure . t
punching cross-cut in cmm .
stroke . mm
total power requirement kW
E2kk9s2xw
weight of the machine ca. t
dimensions of the machine ca. m
neu
1
9440
Polen
6760
128.44
47 to
110 mm
27 mm
25x18 mm
8 s
Eq87etwn
16 mm
700 bar
479 mm
135 mm
388 mm
35 kg
MOBILE HYDRAULICS-POWERSTATION
Double action - fully automated process of punching and return
Wide range of hole diameters up to 27mm
Intelligent control system with inching and automatic load detection
Mode indicator light
Protection against accidental start-up
Wide range of special-shaped punches and dies
OPTIONAL:
Gantry punching station for increased pr...
Manual hole punching machine in almost new condition
Tooling system Trumpf
All Trumpf tools can be set up in the machine
sheet thickness from 0,5 to 10mm
28 tons punching force
for punching, stamping and forming 40mm stroke
Stroke height adjustable
Tool diameter 1mm - 105mm
Quick tool change 10 seconds
Easy handling
X and y stop system
Small stops for hole sequences
Hvon3ih
Machine with accessories to set up all different sizes.
The machine can be inspected and tested under power.
12 months warr...
WORKING AREA: 3050 x 1525 mm
PUNCHING FORCE: 30 ton
N. OF TOOL STATIONS: 45 ( 4 INDEX )
MAX ADMITTED LOAD: 150 Kg
X-AXIS TRAVEL: 3050 mm
Y-AXIS TRAVEL: 1875 mm
MAX PUNCHING THICKNESS: 3,2 mm
STRIKES FOR MINUTE: 300-560
LASER WORKING AREA: 2500 x 1525 mm
SOURCE: AF4000E ; 4000 W
CONTROL UNIT: FANUC 160i-LPB
WEIGHT: 29000 Kg
DIMENSIONS: 13000 x 6000 x 2350 mm
Bwmxthiv8i
NOTE: AUTOMATIC LOADING/UNOLOADING SYSTEM LKI300 mod.MP300EEM; FILTERING AND SUCTING UNIT SIDEROS mod.ECO4CT; THREADING UNIT
PRI...
Control Unit
Brand Bosch
Model Typ3
Main Drive
Punching force 180 kn
Number of axis 2
Movement
X-Axis Movement 1250 mm
Y-Axis Movement 1250 mm
Additional Equipment
2 clamping jaws
9 cassettes type 2000
2 workpiece magazines
Planer tables
Chip drawer
Disk drive
ToPs 2000 in machine control
Light barrier
This Trumpf Trumatic 2000 R Punching Machine was manufactured in the year 2000. It is operated through a Bosch Typ3 control unit. This 2 axis machine has a punching force of 180 kN. It present...
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch
-Shearing tool for U-steel: 80 mm
-Type: 441215124701
-Type: 441215124702
-1x dimensions: 215/205/H30 mm
-1x dimensions: 210/220/H30 mm
Mdkld
-Weight: 19 kg
max force: 30t
max sheet size: 3061x1528mm
max nibbling speed: 1000 1/min
Traversing speed X/Y: 108 m/min
working hours: 41.800
manufacturing year: 2000
Bwjwsd733v
Machinę is being sold together with set of tools and tool grinder
HiFocus Plasma 160A KJELLBERG
Trumpf Tooling System
Punching 28tons
X-Axis 2500mm
Y-Axis 1250mm
Automatic Repositioning of the clamps
2-Axis CN Control type Labod
1/2'' Clamping
Rotation / 8ways reavotool (Incl. Tools)
Fast Hydraulic
Suction
Bwezxwwnco
Suction for plasma "TEKA"
Balls in the table
Die Holder Size I & II
Stripper Holder Rotation
Hours: approx 9000
NC control Fanuc 0iP, 256 kB working memory
working area 1.250mm x 2.500mm without repositioning
punching force: 230 kN
Basic stroke function
2 clamping claws with central locking
14x stationary tool holders (2x A, 9x B, 2x C, 1x D)
1 piece tool stations Multitool MT 10-16
Pvqchq
2 pieces of rotatable tool holders (1x Bi, 1x Di)
Brush tables
Additional tables for max. sheet size (1.250mm x 2.500mm)
Air-cooled Oil cooler
NISSHINBO CNC Turret punch press
Type:MAP-1000
Year:1990
Pressing capacity:22t
Max. working range:1000x1260mm
RAM stroke length:32mm
Max. sheet thickness:6mm
Max. hole diameter:100mm
Max. table feeding speed:40
Hit rate:180hits/min
Nibbling frequency:280spm
Nr of turret stations:22/24
Power capacity:8kVA
With books
With very good tooling package
Bvfowj0jyz
Machine weight:12500kg
Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacture...
General Data
Measurements width 6760 mm
Measurements depth 6100 mm
Measurements height 2500 mm
Machine weight 13700 kg
Control Unit
Brand Siemens
Model Sinumerik 840 D
Ehx2yr9p
Main Drive
Punching force 220 kN
Maximum sheet thickness 8 mm
Movement
X-Axis Movement 2535 x 1280 mm
Max Material Thickness
Steel 8.0 mm
Stainless steel 8.0 mm
Aluminium 8.0 mm
Media
Main electronic connection 11.2 KW
Power consumption 0.7 KW (STANDBY)
Additional Equipment
Working Range 2500 x 1250 mm
Stable C-fram...
Punch holder, die holder, punching tool, punch, punching die, punching punch
Dphyvof
-Die cut size: 9 x 25 mm
-Groove between punch and scraper: 5 mm
-Dimensions: 200/140/H170 mm
-Weight: 12 kg
Fanuc cnc 18 P,
300 kn
area 1525 x 2030 mm
Itiamhd
CNC turret punching machine EMZ 3510 NT
Punching capacity 300 kN
Working area 1270×2500 mm (1270 × 5000 mm with one repositioning)
Bvjjug2avj
Servo-electric twin drive
Number of turret stations: 45 including 4 Auto-index stations
Operating time 46500 hours
OFFER 17402
H0dsznvh
Technical data:
- pressure capacity 250 KN
- punches e.g. up to 26 mm Ø in steel 6 mm
- or up to 13 mm Ø in steel 12 mm
- with special punch saddle up to 39 mm Ø in steel 4 mm
- up to 58 mm Ø in steel 2,5 mm
- Stroke rate 72 1/min
- Grain search device
- throat 200 mm
- installation height 280 mm
- drive 400 V / 1,5 kW
- Space requirement approx. W 800 x H 1250 x D 1000 mm
- Weight approx. 300 kg
Technical Data:
Table dimensions: 2.032 x 1.290 / 4.100 x 1.290 mm
Plate size on table: 3.000 x 1.500
Max. working force: 200 kN
Turret capacity: 28 tools
Max. tool size: 88.9 mm
CNC control: Fanuc P16
Dimensions LxWxH: 4.700 x 2.100 x 1.950
weight: 11.000 kg
Run time: 17.533
Buvouwc98u
10 tools included
The machine is hydraulic
General Data
Measurements width 23900 mm
Measurements depth 8800 mm
Measurements height 8405 mm
Control Unit
Brand Prima Power
Model CNC system
Main Drive
Laser power 3 kW
Laser type YLS-3000 IPG
Punching force 294.2 kn
Movement
X-Axis Movement 3144 mm
X-Axis Rapid Traverse 120 m/min.
Y-Axis Movement 1615 mm
Y-Axis Rapid Traverse 90 m/min.
Tools
Number of index 6 pcs
Max Material Thickness
Steel 8 mm
Stainless steel 8 mm
Aluminium 8 mm
Bsueaehtdt
Media
Main electronic connection 400 V / 50...
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch
-Shearing tool for channel steel: 50 mm
-Type: 440065124502
-Type: 440065124501
-1x dimensions: 136/130/H25 mm
-1x dimensions: 128/132/H25 mm
Gjlbkcnxi
-Weight: 6 kg
hydr.,
Bxc9l7w2
area 1830 x 1525 mm ( 3600 x 1525 mm )
Turret 58 stations max 114.3 mm
300 kn
CNC Fanuc 04-pC
LWH 4601 x 3778 x 2060 mm
weight 14000 kg
Stamping and punching machine X5
Producer: FINNPOWER
YP: 2006
Work surface ... 2530x1270mm
Nominal pressing force ... 25t
O8kvz
Axis X ... 2584mm
Y axis ... 1317mm
Max. Thickness of the cut material ... 8mm
Magazine locations ... 20
Control Fanuc ... Oi-PC
Machine weight ... 10500kg
L x W x H ... 7600x6980mm
The machine is in good condition and can be tested under power.
OFFER 20582
Technical data:
- Pressure capacity 250 KN
- punches e.g. up to 26 mm Ø in steel 6 mm
- or up to 13 mm Ø in steel 12 mm
- with special punch saddle up to 39 mm Ø in steel 4 mm
- up to 58 mm Ø in steel 2,5 mm
- Stroke rate 72 1/min
- Grain search device
- throat 200 mm
- installation height 280 mm
- drive 400 V / 1,5 kW
Bu90shu7ym
- Space requirement approx. W 650 x H 1550 x D 1100 mm
- Weight approx. 300 kg
sell pneumatic punch.
Fully functional
details see photos
PRIVATE SALE - ONLY BY COLLECTION
Jukjo8k
General Data
Measurements width 6500 mm
Measurements depth 6200 mm
Measurements height 2250 mm
Machine weight 7000 kg
Main Drive
Punching force 180 KN
Movement
X-Axis Movement 2500 mm
Y-Axis Movement 1250 mm
Workpiece
Workpiece weight 160 kg
Media
Main electronic connection 400V / 50Hz
Power consumption 18kVA
Additional Equipment
Adaptive calibration of the punch stroke
Deburring function and roller technology
Surface marking / embossing function
MultiBend function
Sorting trap for selectiv...
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch
Ypnn9f29c
-Shearing tool for T-steel: 120 x 70 mm
-Square: 25 mm
-Round: 27mm
-Type: 50305
-1x dimensions: 175/140/15 mm
-1x dimensions: 175/140/15 mm
-Weight: 5 kg
Used Punching presses 0-35t
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Morlock Motors official partner of Machineseeker and Truckscout24
Sell now on Machineseeker! Over 220,000 inquiries per month
10 valuable tricks for buying used machines online
Photo gallery: the 10 strongest forklift trucks in the world
Sample sales contract for used machines in nine languages
