Section benders shaft diameter 0-30mm for sale
Your location was not identified (Edit)
|
5
50 mm
roll diameter 150 mm
revolutions per minute 10 U/min
voltage 400 V / 50 V
adjustment movement hydraulic up to 120 mm
motor speed 1400 U/min
total power requirement 1,5 kW
weight of the machine ca. 430 kg
Tlvmt3hi
dimensions of the machine ca. 1200 x 800 x 1750 mm more
|
|
1
new
Shaft diameter: 30Upper Roll Diameter: 148Bottom Roll Diameter: 118working speed: 2-4motor power: 0,7 - 0,85length: 600width: 800weight approx.: 220heigth: 1450
Technical specifications:
- Steel frame
- Two bottom rolls are powered
- Direct drive power system with gears
- Top roll is idle ( free turning )
- Hardened rolls
- Rolls shafts are special steel material hardened and ground
- Double speed motor
- Standard rolls
- Adjustable guide rolls
- Horizontal and vertical working position
Options... more
|
|
1
angle steel/side length siehe TD mm
double T-iron on the x-axis siehe TD mm
U-iron on the x-axis siehe TD mm
total power requirement kW
Nv3cj
weight of the machine ca. 0,6 t
dimensions of the machine ca. 1000 x 700 x 1380mm m more
|
|
3
angle steel/side length 40 x 40 x 5 mm
Bhn8mouk
U-iron on the x-axis 50 x 25 x 5 mm
roll diameter 98 - 148 mm
speeds of rolls 20 U/min
Speed Speed applicator roll 5 U/min
diameter of roll spindle taper 30 mm
total power requirement 1,1 kW
weight of the machine ca. 220 kg
dimensions of the machine ca. 1000 x 620 x 1400 mm more
|
|
5
Profile Bending machine
KB Türkei
Npey7
model MB 30
bottom shaft 30 mm
top shaft 35 mm
two rollers driven
with basement
capacity:
up to round tube 48 x 3,0 mm
flat material 50x10 mm
square tube 40x40x3,0 mm
weight 170 kg
motor 0,75 kw 400 Volt 50 Hz 3 ph. more
|
|
10
2020
new
Technical data:
-Type: HRB 30
-with foot pedal right/left rotation
-Horizontal and vertical working possible
-Electric
-High voltage current
-Weight approx. 300Kg
-shaft diameter 30 mm, 8er groove
-Hardened special steel shafts
-1 set of rollers
-Underrolls are driven
Dsixjuh
Other roller sets on request. more
|
|
6
bending angle max.: 180 °
working height: 1100 mm
operating voltage: 380 V
total power requirement: 6,2 kW
Weight approx.: 2,0 t
dimension machine [...]: 1,1x0,6x1,24 m
hydraulic profile bending machine
Gu3slw
- 2- foot control
- Hydraulic make Orstra Hydraulik
- angular precision adjustment 8° counterclock-and clockwise
- 1 set tools as accessory
Further tool tapers available on price request.
On sale as is, as described more
|
|
1
new
Shaft diameter: 30Upper Roll Diameter: 148Bottom Roll Diameter: 118working speed: 2-4motor power: 0,7 - 0,85length: 600width: 800weight approx.: 220heigth: 1450
Technical specifications:
- Steel frame
- Two bottom rolls are powered
- Direct drive power system with gears
- Top roll is idle ( free turning )
- Hardened rolls
- Rolls shafts are special steel material hardened and ground
- Double speed motor
- Standard rolls
- Adjustable guide rolls
- Horizontal and vertical working position
Options... more
|
|
1
angle steel/side length siehe TD mm
double T-iron on the x-axis siehe TD mm
Bhrrimu2oi
U-iron on the x-axis siehe TD mm
total power requirement kW
weight of the machine ca. 0,2 t
dimensions of the machine ca. 800 x 700 x 1200mm m more
|
|
1
50 mm
roll diameter 148 mm
13,6-27,2
engine output 2,2 kW
turning speed range - power take off spindle 13 U/min
dimensions of the machine ca. 750 x 1450 x 800 mm
Features:
2 rollers powered
settings readout on scale
easy reach emergency button
supplied with standard roller set
Bhoh7uil
optional: various roller sets (available on request) more
|
|
1
Ring Rolling machine ZOPF
- model ZB 30/3 MD
TECHNICAL SPECIFICATIONS:
- three driven shafts, smooth surface
- manual adjusting of the center roller
- working position horizontal and vertical (optional)
- digital readout
- shafts are supported by conical bearings
- slide bars on the slide-support are exchangeable
- shaft diameter: 20 mm
- roller diameter: 76-86 mm
- shaft rpm: 11 U/min
- voltage: 400V 50Hz 3Ph
- drivingmotor: 0,18 kW
- adjusting way: 35 mm
- weight: 85 kg
Mzu9r
- dimensions: 53... more
|
|
Right and left rotation via switch
Manual feed with digital display
Bgqczjx3cl
Various additional rollers
Shaft diameter: 30 mm
Wavelength: 75 mm
infeed path: 97 mm more
|
|
1
total power requirement 0,75 kW
weight of the machine ca. 0,22 t
Damgci2
dimensions of the machine ca. 530 x 670 x 630 m more
|
|
1
new
Shaft diameter: 30Upper Roll Diameter: 148Bottom Roll Diameter: 118working speed: 2-4motor power: 0,7 - 0,85length: 600width: 800weight approx.: 220heigth: 1450
Technical specifications:
- Steel frame
- Two bottom rolls are powered
- Direct drive power system with gears
- Top roll is idle ( free turning )
- Hardened rolls
- Rolls shafts are special steel material hardened and ground
- Double speed motor
- Standard rolls
- Adjustable guide rolls
- Horizontal and vertical working position
Options... more
|
|
1
- Roller inserts
- Foot switch
- L/R run
Baeeiivks8
- capacity round full Ø: 15 mm
- Capacity round Ø / wall thickness: 30 mm / 1.5 mm
- Capacity square / wall thickness: 30 x 30 mm / 1.5 mm
- Capacity flat profile: 10 x 30 mm
- Engine power: 1,1 kW
- voltage: 400 V
- Dimensions: 850 x 1260 x 620 mm
- Weight: 270 kg more
|
|
3
50 mm
roll diameter 150 mm
revolutions per minute 10 U/min
adjustments 120 mm
total power requirement 1,5 kW
weight of the machine ca. 430 kg
dimensions of the machine ca. 1,2 x 0,8 x 1,75 mm
The PB 50-3 H is a hydraulic profile bending machine: we produce
thisprofilebender in Europe and deliver it directly from our stock.
This hydraulic profile bending machine has a shaft diameter of 50 mm and 3
driven rolls. It is easy to switch between working with two or three driven
rolls via the gea... more
|
|
9
2019
new
Technical data:-Type: PB30 originating in Turkey-with foot pedal right/left rotation-2 speeds-Horizontal and vertical operation possible-Electric heavy current weight approx. 300kg shaft diameter 30 mm, 8-groove-hardened special steel shafts-1 set of hardened rolls-bottom rolls are drivenOn request also further roll sets.
Bfv8ohbueb more
|
|
3
|
|
4
Angle iron/leg length40 x 40 x 5 mmRound iron30 mmU-iron over x-axis50 x 25 x 5 mmRoller diameter - bore30 mmRoller diameter - tools118 - 148 mmSpeed20 rpmPower voltage400 V / 50 HzTotal power requirement0.75 kWMachine weight approx.0.250 tSpace requirement approx.0.6 x 0.6 x 1.4 m
Bfpsgsicox more
|
|
1
2015
new
Description:
Motor ring bending machines, horizontal and vertically can be used for profiles, pipes and solid material
heavy steel welded construction
horizontal and vertical work opportunity
lower roller directly, electrically powered
Rollers are hardened
Shafts made of special steel, hardened and polished
Delivery of top roller
Pte9dq
lateral leveling rollers, infinitely adjustable
2 driven rollers
Dvopju
powerful 400 V motor
Left / right rotation by means of foot pedal
Mobile control console... more
|
|
5
Profile Bending machine
Akbend
model APK 30
Dwciqe
bottom shaft 30 mm
top shaft 35 mm
two rollers driven
with basement
capacity:
up to round tube 48 x 3,0 mm
flat material 50x10 mm
square tube 40x40x3,0 mm
weight 170 kg
motor 0,75 kw 400 Volt 50 Hz 3 ph. more
|
|
5
50 mm
roll diameter 148 mm
revolutions per minute 13,6/27,2 U/min
total power requirement 1/1,4 kW
3ojke8o
weight of the machine ca. 420 kg
dimensions of the machine ca. 800x920x1450 mm more
|
|
9
new
|
|
3
Technical data:
-mot 2. driven rollers
-Manual. Delivery of the upper roller
-Shaft diameter 30 mm
-Shaft rotation 6 K rpm
Beprjwuk9x
-Roll diameter 132 mm
-Bending performance - flat steel 50 x 10 mm
-Square 30 mm
-Round tube 60 x 1.5 mm
-Drive 400 V / 0,75 kW
-with: - left / right - run - Standart-bending set for flat and angle material
-Weight approx. 200 kg
-Space requirement approx. B H 1200 x 1400 X 800 mm more
|
|
2
Description
-Manual or motor-driven ring bending machines, horizontal and vertically can be used for profiles, pipes and solid material
-for round bending of rectangular material
-sturdy construction, ground fixable
-Drive the two lower rollers with hand crank
-Hardened and ground rollers
-Corrugated steel, hardened and ground
-Delivery via upper roller
-motor execution
-horizontal and vertical work opportunity
-powerful 400Volt engine
-Left / right rotation by means of foot pedal
Technical da... more
|
|
4
OSTAS RING BENDING MACHINE
TYPE OPK-32
-Shaft diameter 30 mm
Bbwravdpkp
-Hardened special steel shafts
-1 set of hardened rolls
-Bottom rollers are driven
-Foot pedal
-Horizontal and vertical work
-Manual
-400V
PRICE is plus VAT
DUTCHMACH
Metal working machinery
ENSCHEDE - NETHERLANDS
(3 km from the German border) more
|
|
4
Ring Rolling Machine Zopf
- Model ZB 60 M without stand
- year of construction 2018
- motorized
- tw working rolls
- shaft diameter 30 mm
- including standard rolls
- bending capacity round tube up to 48 x 3,2 mm
- solid material up to 30 mm
- weight around 150 kg
Bd8pu0kwu0
- motor 0,75 kw 400 Volt 50 Hz 3 phase more
|
|
6
Akyapak Akbend ring APK 30 profile bending machine
Description •. base • horizontal-and vertical use • foot switch • standard rollers (divided) • foot switch • CE mark / conformity • operating instructions on German
Technical details
• Angle: 40 x 5 (500 d) mm
• I - steel - flat: 80 x 15 (d 700) mm
• I steel upright: 50 x 10 (800 d) mm
• Round material: 30.0 (d 700) mm
• Max size: 60 x 2 (1200 d) mm
• Square material: 50 x 30 x 3 mm
• Dimensions L W H: 670 x 530 x 1350 mm
• Weight: 185 kg
Nz8z7f... more
|
|
1
|
|
8
Technical data:
- 3 mot. driven rollers
- horizontal + vertical working position
- manual. Delivery of the upper roller
- Shaft diameter 20 mm
- Wave rotation 6 rpm
- Roll diameter 76 - 86 mm
- Bending power
- Flat steel 50 x 10 mm
- Square 30 mm
- Round tube 60 x 1.5 mm
- Drive 400 V / 0.18 kW
- with:
- E.- Foot button for right / left - run
- Digital display
- Pipe roll set plastic 18 mm
- Square roller sets 15 + 30 mm
- Machine table base
- Weight approx. 130 kg
Qw... more
|
|
1
|
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Sheet metal working
Dealer for Sheet metal working
