Used Folding machines / bending brakes (motor-driven) over 4000mm for sale (54)

Condition: used, Year of construction: 1970, Sheet width: 6040 mm Sheet thickness: 2 mm Total power requirement: 10 kW Machine weight: approx. 7,000 kg Cobjwgkybjvm Tycsgt

Condition: used, Year of construction: 2006, Brake force 300 tons Working length 6100 mm Distance between uprights 4550 mm Throat depth 400 mm Punch stroke 320 mm Table width 220 mm Fast speed (0 – 100) mm/sec Cobvmjwhcyce Tycsgt Woriking speed (0 - 7) mm/sec Upstroke speed (0 – 90) mm/sec Hydraulic pressure (max) 255 bar Main electric motor 18,5 KW Length 7500 mm Width 2900 mm Height 3700 mm Weight (aproxim.) 32000 Κgr

Condition: used, cetisPV-GR / cetisPV GR / cetisPVGR, h.a.l.m. elektronik GmbH Network resistance Cebvsq S Uduem Tycegt Model: cetisPV-GR Condition: Used

Condition: good (used), Year of construction: 2006, machine/vehicle number: 2006-08, The machine will be repaired, tested, and cleaned by a specialist and will then be fully functional. A test run will be conducted. Sheet width: 6400 mm Steel sheet thickness: 1.5 mm Aluminum sheet thickness: 2.5 mm Stainless steel sheet thickness: 1.0 mm Backgauge: 1000 mm Thrust: 1050 mm Color: blue Total power requirement: 32 A Cgobvm Tyowd D S Sscet Space requirement: 8500 x 2100 x 1800 mm Machine weight: 5000 kg Upper beam stroke: 200 mm with roller shears Number of uprights: 5 Opening width: 200 mm Bending angle: 145 degrees

Condition: good (used), Year of construction: 1993, Folding bench for roll goods with manual roll shears 6m working length Cgobvoqbqmfsm Tycjt Material thickness up to 1.2 mm, aluminum up to 1.5 mm

Condition: like new (used), Year of construction: 2002, operating hours: 7,500 h, Functionality: fully functional, AMADA press brake retrofitted in 2025, like new, details below: Type: HFT 220-4 Capacity: 4000 x 220T Number of axes: 4 (Y1 Y2 X R) 2D graphics and USB drive Rapid traverse speed with light curtains: 100 mm/sec Backgauge: 650 mm to 1000 mm New full-length interpolation line Cgobvmewbnq Hj Tycjt CNC: CD2013 installed in 2025/04 by AMADA

Condition: used, Year of construction: 2004, sheet width 4000 mm Csbvmot Hw Hfe Tycsgt plate thickness 2,5 mm distance between columns 4060 mm total power requirement 3 kW weight of the machine ca. 5,5 t

Condition: good (used), Year of construction: 1999, Functionality: fully functional, bending angle: 140 °, sheet thickness steel (max.): 2 mm, working width: 6,000 mm, input voltage: 400 V, Key Features of the LSK HK-60 CNC: Sheet Length Capacity: 6,000 mm​ Sheet Thickness (EN10130): 1.5 mm​ Bending Angle Range: 0 – 135°​ Upper Beam Stroke: 0 – 140 mm​ Back Gauge Travel Distance: 5 – 1,250 mm​ Back Gauge Speed: 1 meter per 3 seconds​ The machine is equipped with a comprehensive work cycle that includes programmable bending angles, upper beam lifting heights, and back gauge positions. Standard functionalities encompass rounded corner bending and open hem pressing, with options for both manual and automatic operation modes. The control system operates on an industrial PC with a Windows Embedded operating system, providing a user-friendly interface for programming and operation Csbvev Urb Dsm Tycogt Verify the accuracy of the information with the seller

Condition: used, cetisPV-BI / cetisPV BI / cetisPVBI, h.a.l.m. elektronik GmbH Interface Box Cgebvmeq S T Ahs Tycst Model: cetisPV-BI Condition: Used

Condition: good (used), Year of construction: 2002, machine/vehicle number: 8432, Motorized shear, 5 stop fingers, laser protection The machine will be repaired, tested, and cleaned by a specialist and will then be fully functional. A test run will be performed. Sheet width: 6200 mm Steel sheet thickness: 1.5 mm Aluminum sheet thickness: 2.0 mm With backgauge Thrust: 1000 mm Color: blue Total power requirement: 3 kW Space required: 7350 x 1400 x 1860 mm Insertion depth: 1000 mm Machine weight: 2800 kg With roller shear Cgjbvmswa Nxij Tycjt Number of uprights: 5 Opening width: approx. 200 mm Bending angle: 145 degrees

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, sheet thickness (max.): 3 mm, working width: 4,020 mm, overall weight: 9,500 kg, bending length: 4,000 mm, TECHNICAL DETAILS Sheet width: 4,000 mm Sheet thickness: 3 mm Working width: 4,020 mm Cjbvmov Um Ewo Tycegt Bending capacity: 450 mm MACHINE DETAILS Space requirement: approx. 5,240 x 1,510 x 1,840 mm Machine weight: approx. 9.5 t EQUIPMENT - Electric backgauge 1,000 mm - Foot switch

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, bending angle: 142 °, sheet thickness (max.): 3 mm, working width: 1,000 mm, total length: 7,330 mm, total height: 1,850 mm, total width: 7,330 mm, overall weight: 5,300 kg, working length: 6,200 mm, bending length: 6,200 mm, space requirement width: 1,610 mm, space requirement length: 7,330 mm, space requirement height: 1,850 mm, insertion depth: 1,000 mm, height adjustment type: hydraulic, Equipment: documentation/manual, safety light barrier, Our Thalmann folding machine, as shown in the pictures, is for sale. It is currently still in operation, fully functional, and will be available starting mid-May. If you are interested, you are welcome to inspect and test it. Cebov Uhycovm Tycegt

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, machine/vehicle number: 6290, sheet thickness steel (max.): 3 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness (max.): 4 mm, working width: 6,200 mm, back gauge: 1,500 mm, working length: 6,200 mm, bending length: 6,200 mm, THALMANN THAKO: 6.2 m x 1,500 mm x 3.00 mm We are currently offering a "Thalmann Thako" for sale. The machine has been used very little and is in very good condition. As a 3 mm (steel) machine, the machine also features exceptionally high-quality features, including a 1,500 mm insertion depth. A rare opportunity to acquire a single-arm bending machine/swivel bending machine with this equipment at a (relatively) reasonable price. The following are the key facts: - Thalmann THAKO 30-6.2 M - 6,200 mm bending length - 1,500 mm insertion depth - 3 mm steel, 4 mm aluminum bending capacity - Controlled backgauge - Roller shear/cutting device - 6 columns Cebvm Tyjv Uckpocogt - Top condition, rarely used! The machine can be inspected live by appointment.

Condition: excellent (used), Year of construction: 2018, MODEL TD 150 Cgsbvm Tyev Rq E Tecjt MAXIMUM CAPACITY 1.50 mm (400 N/mm²) WORKING LENGTHS 6.4 m INCH DEPTH 1250 mm BEND BLADE WIDTH 10 mm + additional guide 10 mm MAX. BENDING ANGLE 143° BENDING ACCURACY ± 0.5 Working length 6400 mm Insertion depth 1250 mm Max. Clamping opening 120 mm Max. bending capacity: S = 20 mm 1.50 Bending capacity: S = 20 mm1.50 steel plate 400 N/mm² Max. Bending angle 1.5 mm - 140°/ 2 mm - 130° Bending capacity S = 20 mm 50% of bending capacity Bending accuracy +/- 0.5° (with the use of crowning) Bending speed 0° to 140° in 1.5 s / 140° - 0° in 1.5 s Clamp travel distance 15/25 mm - 1250 mm Number of grippers 5 units Maximum gripper opening 28 mm (standard) Variable depth stop speed up to 380 mm / s Stop tolerance range +/- 0.1 mm per set Repeat accuracy Electrical voltage 400 V / 50 Hz / 3 phases + E Total electrical power 18.5 kW Rated current / fuse protection / pump 32 A / 63 ccm Dimensions 8100 x 2250 x 2100 mm Weight 10,500 kg Compressed air connection 8 bar Ambient operating temperature 5° - 35

Condition: used, 3x4Ban(f) - 2x13W3(f) / 3x4Ban f 2x13W3 f / 3x4Banf2x13W3f, cetisPV-Adap / cetisPV Adap / cetisPVAdap, h.a.l.m. elektronik GmbH Interface-Box Cobvm Tyoq S Ufcecjgt Model: 3x4Ban(f) - 2x13W3(f) Type: cetisPV-Adap Condition: Used

Condition: good (used), Year of construction: 2002, machine/vehicle number: 02022-00, Hand shears, foot pedal, retractable sheet support The machine will be repaired, tested, and cleaned by a specialist and will then be fully functional. A test run will be performed. Sheet width/working Sheet width: 6020 mm Steel sheet thickness: 1.0 mm Aluminum sheet thickness: 1.5 mm Stainless steel sheet thickness: 0.6 mm Without backgauge Thrust: 1000 mm Color: blue Total power requirement: 16 A Cebvov Szuhem Tycogt Space requirement: 6800 x 1600 x 1700 mm Insertion depth: 1000 mm Machine weight: 2400 kg With roller shears Number of uprights: 4 Opening width: 200 mm Bending angle: 145 degrees

Condition: new, Year of construction: 2025, bending angle: 145 °, power: 3 kW (4.08 HP), Equipment: documentation/manual, Long folding machine (HKS-E 6m Easy) with motorized cutting system, 5 inch Touch screen and Easy programming software with 40 programms stoarage capacity. Working length: 6.100 mm Machine length: 7.000 mm Sheet metal thickness: 1,2mm (Al), 1,0 mm (Stahl) Stand number: 5 Cjbvm Tysrul A Ascsgt Machine weight: 2.500 kg Delviery time: 3 Months

Condition: like new (used), Year of construction: 1990, FEATURES Working length: 6 m Working thickness: 1.5 m Cgsbvjv Ipgqom Tycot Electric shear 6-fold program Manual stop stops Price on request

Condition: used, cetisPV-OU / cetisPV OU / cetisPVOU, h.a.l.m. elektronik GmbH Interface Box Cgsbveq S T Adsm Tycst Model: cetisPV-OU Condition: Used

Condition: good (used), Year of construction: 2014, machine/vehicle number: K14027/K24145, Used Jorns folding machine with the following features: • Reinforced version with additional column unit • Deep throat with motorized depth stop system 1250 mm, with 4 stop fingers • CNC touch graphic control on the swivel arm (control system upgrade to CP200) • CE-compliant safety with laser monitoring • RH Automatic material thickness adjustment • OV Manual upper beam pre-tensioning (crowning) • Laser-hardened tools (additional surface hardening) The machine has been regularly serviced by us and is in good condition. It is a reinforced version with an additional column unit, which enables high-precision bending results even at higher power levels. Furthermore, this version meets the requirements of processing steel of S320GD and S350GD quality, which is not possible with the standard version. This year, the machine was overhauled at the JORNS factory. The following services were performed during the overhaul: • All eight column units were completely replaced, and the clamping arms were reinforced according to the current design. • The control system was upgraded to the current CP200 control system. The machine received a new control cabinet (most of the electrical components were replaced) and a new CNC touchscreen operator terminal. • The DP was upgraded: Dynamic positioning and an electro-hydraulic measuring system were retrofitted. The machine is now state-of-the-art in terms of parallel closing and individual pre-tensioning (see the explanatory video in the equipment section). • Beam renovation: The upper beam and bending beam were removed. All three tools (lower beam, lower beam, and lower beam) were welded and reground (no damage to the tools). • Hydraulics checked and serviced. • Geometry checked: air gap of lower beam, bending beam, etc. were readjusted. • The machine was cleaned. The new price of a similarly equipped machine is approximately €300,000 plus VAT. Power: 6400 x 3.0 x mm, 4.0 mm aluminum, 2.0 mm stainless steel. Backgauge: 20 - 1250 mm. Color: anthracite. Total power requirement: 400 V. Insertion depth: 1250 mm. Upper beam stroke: 200 mm. Without roller shears. Number of columns: 8. Cgobvm Teuqbfysycjt The machine will be repaired, checked, and cleaned by a specialist. A test run will be performed.

Condition: new, Year of construction: 2025, Hydraulic bending machines HKS-CNC Profi are equipped with automatic scissors and a movable mass for moving sheet metal. CNC software enables the graphic design of profiles of various forms and sizes. A 21,5-inch industrial LCD touch-screen makes the programming even more manageable. Working length: 6.100 mm Machine length: 7.000 mm Cjbvm Tsuc Ua Hoycegt Sheet metal thickness: 1,5mm (Al), 1,25 mm (Stahl) Stand number: 6 Machine weight: 3.600 kg

Condition: used, cetisPV-BI, cetisPV-OU, h.a.l.m elektronik GmbH Germany halm-B-Interface, Interface Box Model: cetisPV-BI, cetisPV-OU Type: cetisPV-BI, cetisPV-OU, h.a.l.m elektronik GmbH Germany halm-B-Interface, Interface Box Cgsbvmeq S Tito Tycet Condition: Used

Condition: good (used), Year of construction: 2006, machine/vehicle number: 102-123, With CNC touchscreen graphic control, hydraulic material thickness adjustment, manual upper beam pre-tensioning, motor-driven depth stop + conical stop, motor-driven roller shear. The machine will be repaired, tested, and cleaned by a specialist and will then be fully functional. A test run will be performed. Sheet width: 4010 mm Steel sheet thickness: 2.0 mm Aluminum sheet thickness: 3.0 mm Stainless steel sheet thickness: 1.5 mm Backgauge: 30-1000 mm Thrust: 1165 mm Color: gray/blue Total power requirement: 5.5 kW Space requirement: 5500 x 2080 x 2100 mm Insert depth: 1165 mm Machine weight: 3800 kg Motor power: 5.5 kW Upper beam stroke: 180 mm Cgsbev I Ta Uevm Tycet with roller shears Number of columns: 4 Opening width: 180 mm Bending angle: 145 degrees

Condition: new, 70099689, cetisPV-XF-Tube-ZBO / cetisPV XF Tube ZBO / cetisPVXFTubeZBO, h.a.l.m. elektronik GmbH Xenon flash lamp Cetis PV-XF2 - New Model: 70099689 Type: cetisPV-XF-Tube-ZBO Condition: New Cobvm Tyjq S T U Tecsgt

Condition: used, cetisPV-XF2-P / cetisPV XF2 P / cetisPVXF2P, Power Unit U07 / PowerUnitU07, h.a.l.m. elektronik GmbH Xenon flasher power supply Cobeq S T D Rsvm Tycogt Model: cetisPV-XF2-P Type: Power Unit U07 Condition: Used