Used Profile bending machines - intake diameter 51-70mm for sale (23)

Condition: used, Shaft diameter: 60 mm, Profile bending machine with many accessories and many rollers (also for round tubes). Ujjqhro9Uz Shaft diameter 60mm 3 driven rollers Hydraulic adjustment of the upper roller Adjustable rollers Sturdy design Weight approx. 1400kg

Condition: used, Year of construction: 1970, angle steel/side length 90 x 90 x 9 mm Dpkfuf double T-iron on the x-axis I 80 mm U-iron on the x-axis U 65 mm flat iron St. 52 - flat 160 x 25 mm diameter min. 450 mm flat iron St. 52 - upend 80 x 15 mm diameter min. 700 mm square bar steel 45 x 45 mm bending speed 5 + 10 mm/min total power requirement 7,5 kW weight of the machine ca. 2,3 t

Condition: new, Year of construction: 2024, Shaft diameter: 70 mm, CNC-controlled profile and tube bending machine for demanding and precise bending work with hollow profiles and tubes. Regardless of the material, our machines can bend aluminum - steel / stainless steel - various plastics such as PVC - window profiles (depending on the application) with repeat accuracy. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models in the REPANDUS series work with a fixed upper roller and two movable lower rollers - this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-damping cast steel Shaft diameter of the top and bottom rollers Ø 70 mm Shafts made of special steel - hardened and ground Bending force 190 kN Pzauz3Ojpv Largest surmountable moment of resistance with standard rollers W = 35 cm³ Smallest possible bending radius with standard rollers 120 mm Roll speeds 1 to 15.6 rpm Drive power roller drive 4 kW Drive power hydraulic unit 4 kW Weight approx. 1050 kg CNC control - High-end CNC control based on Windows® 10 with TFT color monitor. Our special software works with special algorithms for the control and regulation of three to five CNC axes in connection with profile and tube bending work. Automatic calculation of 150 roller speeds and 500 positioning speeds of the bottom rollers. Automatic work cycle The workpieces can be bent in one or more passes. Up to 36 different consecutive radii can be bent on one bar of material.

Condition: used, pressure 50 t throat 610 mm hole diameter in sheet thickness 30 / 15 mm connected load 5,5 kW stroke 60 mm 1510 x 660 mm weight of the machine ca. 1,9 t Bmaa2Tokbsm dimensions of the machine ca. 1,5 x 1,55 x 1,9 m ith a wide range of accessories See pictures

Condition: new, Year of construction: 2023, Ring Rolling machine Zopf profile bending machine model ZB 100/3 H - with NC control - three driven shafts - hydraulic adjustment of center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw Ivo7Koqow - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 800 kg NC control unit: two axes controlled touch screen memorize of 1000 programs interpolation

Condition: new, Year of construction: 2024, Shaft diameter: 60 mm, Overall weight: 1,000 kg, Total length: 1,200 mm, Total width: 850 mm, Total height: 1,200 mm, Warranty duration: 12 months, Power: 3 kW (4.08 HP), Equipment: Emergency Stop, MODEL HPK 65 Top shaft diameter Ømm 60 Bottom shaft diameter Ømm 50 Roller diameter Ømm 180 Operating speed m/min 5 Engine power kW 3 Length mm 1200 Width mm 850 Height kg 1200 Weight mm 1000 Isvmd7M Steel construction welded body Three waltz ball driven Hardened and ground shafts Hardened standard rolls Horizontal and vertical working position Movable control panel 3-way movable side rests Precision bending with brake motor Digital indicators (2 pcs)

Condition: new, Year of construction: 2024, Metallkraft PRM 60 FH Hydraulic Ring Bending Machine Can be used horizontally and vertically for profiles, pipes and solid material. Heavy welded steel construction Horizontal and vertical working possibility Hydraulic feed of the upper roller Digital display for infeed roller All 3 rolls driven and hardened Lateral straightening rolls, infinitely adjustable Separate control panel with foot control Special accessories: Tube bending rolls Angle bending rolls Special straightening rolls Profile bending rolls Plastic rolls for soft materials TECHNICAL DATA: Length (product) approx. 1000mm width/depth (product) ca. 1400mm height (product) approx. 1650mm Weight (net) approx. 950kg Bending capacity see data sheet Power drive motor 1,5kW Supply voltage 400V Mains frequency 50Hz Shaft diameter top 215mm Shaft diameter bottom 215mm roller diameter top 60mm roller diameter bottom 60mm Speed 4m/min Hydraulic pressure 16t SCOPE OF SUPPLY: Standard bending rolls mobile foot pedal for left-right rotation with emergency stop straightening rolls digital display for infeed roller Hint: Please specify material type to be processed when ordering! NC control Art. No. 3880163: Only possible ex works 3Vx8J3T0P Optionally the machine can be equipped with bending rolls especially for your needs Also untypical sizes can be made on request

Condition: new, Shaft diameter: 180Upper Roll Diameter: 60Bottom Roll Diameter: 50working speed: 5motor power: 3length: 1200width: 850heigth: 1200weight approx.: 1000 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900 T7Xifvv2         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine Cjuyvfy0A -Replacement rollers -Tool for: Ø 35 mm pipe -Outside: Ø 200 mm -Bore: 49mm -Quantity: 4 rolls available -Price: complete -Weight: 44kg

Condition: new, 75 (800) mm 60 (750) mm L-beam 80 x 80 x 8 (800) mm T - beam - web outwards 100 x 11 (1000) mm Axis diameter 80 mm work speed 6,0 m/min Tool diameter 242 mm total power requirement 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1,5 x 1,05 x 1,4 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers Bloqijvp3V - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device

Condition: new, Year of construction: 2023, Ring Rolling machine Zopf profile bending machine model ZB 100/2 H - two driven shafts - hydraulic adjustment of center roller - digital readout with memory - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 720 kg Gvclbc

Condition: new, Year of construction: 2024, Shaft diameter: 60 mm, Overall weight: 910 kg, Power: 2.2 kW (2.99 HP), Equipment: Emergency Stop, STANDARD ACCESSORIES Steel welded construction frame 3 rolls are motorized driven Hardened shafts from special steel material Top roll hydraulic moveable up-down Horizontal and vertical working position Standard rolls Bmxm3Gffzs Guide rolls Brake motor equipped for the precision bending Mobile control panel Model HPK 60 Shaft Diameter Ømm 60 Bottom Rolls Diameter Ømm 215 Upper Rolls Diameter Ømm 215 Working Speed m/min 4 Motor Power kW/V 2.2/380 Dimensions (L X W X H) mm 1500x900x1700 Weight kg 910

Condition: new, angular steel - leg outwards -- mm double T-iron on the x-axis -- mm U-iron on the x-axis -- mm 50 mm 150 mm throat 120 mm total power requirement 1,5 kW weight of the machine ca. 0,36 t dimensions of the machine ca. 1,1 x 0,8 x 1,4 m Exhibition machine NEW, year of construction: 2021 The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel. The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine. - Manual adjustment of the top roller with a handwheel Bu0Nripqxz - Vertical and horizontal work possibility - 3 driven rollers - Supplied with a standard roller set - Foot pedal

Condition: new, Shaft diameter: 60Upper Roll Diameter: 215Bottom Roll Diameter: 215high performance hydraulic: 16working speed: 4motor power: 1,5length: 1000width: 1400heigth: 1650weight approx.: 950 Technical specifications: - Steel welded construction frame - 3 Rolls are motor driven - Hardened shafts from special steel material - Top roll hydraulic moveable up-down - Horizontal and vertical working position - Standard rolls - Guide rolls - Brake motor equipped for the precision bending - Mobile control panel Options: - Digital Readout EURO 700,-- - NC Unit EURO 7.000,-- - Angle Lateral Guide Rolls EURO 1.400,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength H3Ykeh2J3          

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine -Spare roles -Outer diameter: 200 mm Std7Kw -for: 35 mm pipe -Bore: 49 mm -Dimension: Ø 200 x 81 mm -Weight: 11 kg

Condition: new, 50 (500) mm 45 (500) mm L-beam 80 x 80 x 8 (800) mm T - beam - web outwards 80 x 9 (800) mm Axis diameter 60 mm Hclkqm9As work speed 5,0 m/min Tool diameter 195 mm total power requirement 3 kW weight of the machine ca. 1,0 t dimensions of the machine ca. 1,2 x 0,9 x 1,2 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device

Condition: new, Year of construction: 2024, Ring Rolling machine Zopf profile bending machine model ZB 100/3 H - three driven shafts - hydraulic adjustment of center roller - digital readout with memory - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw Dgk28B9 - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 800 kg

Year of construction: 2021, Condition: new, OSTAS PROFILE ROLLER TYPE OPK-65 - Axle diameter 60 mm - Lower two rollers are moved hydraulically - Three rollers driven - 2 Digital readouts - Brake motor - Horizontal/vertical use Ytgi8K - Mobile control panel - Emergency stop - Documentations - 400V CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Condition: new, Ostas profile ring bending machine OPK 65 Technical specifications: - tool holder, shaft: 60mm - tool: 175mm - working speed: 5m/min Nylkh - Engine: 3kw - Dimensions L-W-H: 900x1250x1200mm - weight: 1080kg - 3 rollers driven - Hardened standard rollers - Hardened and ground tool holder, shaft - Mobile control panel - Horizontal and vertical working position - Side angle guide rollers - Digital displays (2pcs.) - Brake motor - According to CE-Norm

Condition: new, angle iron / side length: 60 x 60 x 6double T-iron over x-axis: UPN 80 UNP 30U-iron over x-axis: UPN 65 UPN 30total power requirements: 3weight approx.: 1,4messurements (LxWxH): 1200 x 1100 x 800 Gouu3Ev

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Profile bending tool: 5 pieces -Profile measure: see photos Yqnosqkc -Socket: Ø 35 mm -Price: complete -Dimensions: 240/290/H210 mm -Weight: 28.7 kg

Year of construction: 1994, Condition: excellent (used), Technical data: Special machine for the production of pipe coils hydraulically adjustable rollers bending moment: 50 cm/3 bending diameter: 500 - 3500 mm bending length: 3000 mm NC control: ROUNDO Dimensions (length x width): approx. 5500 x 1700 mm Weight: approx. 9,5 to accessories: various roller sets condition: the machine is in very good condition Hlg2Xewh The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: as good as new (ex-display), Year of construction: 2023, bending machine model HB 60 - two roller driven - digital readout with memory - standard roller set knurled - horizontal and vertikal Yrjazk HS-Code: 8462 2998