sheet width 1600 mm
plate thickness 6 - 20 mm
no. of strokes 1-15 Hub/min
Number of Straightening rolls 11
straightening feed 10 m/min
straightening roll diameter 160 mm
adjustment 10- 40 mm
coil weight 35 t
total power requirement 115 kW
Bt3rxen8yt
weight of the machine ca. 85 t
dimensions of the machine ca. 25 x 5 x 3 m
Line consists out of double sided cone decoiler, leveling machine UBR 1600 x 20
and a Steiner shearing machine with 1800 x 25 mm capacity. Line works
automatically.
More technical data on requestDecoiler REITER
Year of construction 2006
Original price of the entire system EURO 288.200, -
SPEZIALL PRICE EURO 145.000,--
Coil width 1,250 mm
Coil outside diameter 1,300 mm
Coil inside diameter 508 mm
Cutting length 7,000 mm
Sheet thickness of 0.4 is 1.5 mm
Maximum coil weight 2000 kg
Material steel Rm max. 400 N / mm²
CU, Al, stainless steel
Uncoiler for metal bands rider
6 pcs. CNC controlled
Type ABH 125-6f
Max. Width of the coil 1270 mm
Max. Wei...
sheet width: 1500 mm
plate thickness: 1 mm
no. of strokes: Hub/min
control: Ducter 1500
total power requirement: 2,0 kW
CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears
Shears:
- cutting length 1500 mm
- sheet thickness approx. 1.0 mm
- operation via control panel and foot control
- manual operation / automatic
- table size 1530 x 400 mm
- Rear end stop: adjustment range 1300 mm
- Size: LxWxH: 1600 x 2.0 x 1350 mm
Straightening system:
- stand width 1585mm
- Tab...
neu
ca. 12 Wochen ab Auftrags
Spanien
65300
1194.99
1250 mm
2 Stk.
4.5 kW
20 m/min
3000 kg
CNC control with touch screen
2 pairs of knives with longitudinal division
Epjiq9az
Drive via servo motor
2 feed rollers
5 straightening rolls
Decoiler 3 tons
Feed table
Cut-to-length shear
sheet width ca. 10 mm - ca. 400 mm mm
plate thickness 0,30 - 2,0 mm
strip width min/max
total power requirement kW
weight of the machine ca. 6,5 t
dimensions of the machine ca. m
Make Schmitz
Year of manufacture 1969
Thicknesses from approx. 0.30 mm to approx. 2 mm
Widths from approx. 10 mm to approx. 400 mm
Ring inside 300/400/500 mm
Ring outside max. 1000 mm
Decoiler
Reel
Knife set 2 mm to 6 mm wide
Intermediate rings 1 mm to 50 mm
Dividers
Separating plate
Timbers 3 mm to 50 mm
Daob8jl
sheet width 1600 mm
plate thickness 6 - 20 mm
no. of strokes 1-15 Hub/min
Number of Straightening rolls 11
straightening feed 10 m/min
straightening roll diameter 160 mm
Bhjg9aq23x
adjustment 10- 40 mm
coil weight 35 t
total power requirement 115 kW
weight of the machine ca. 85 t
dimensions of the machine ca. 25 x 5 x 3 m
Line consists out of double sided cone decoiler, leveling machine UBR 1600 x 20
and a Steiner shearing machine with 1800 x 25 mm capacity. Line works
automatically.
sheet width / mm
plate thickness / mm
no. of strokes / Hub/min
total power requirement / kW
weight of the machine ca. / t
dimensions of the machine ca. / m
DESCRIPTION
Automatic loading and unloading system
P83vi7
Automatic cutting gap adjustment
Flying guillotine shears
Air float board stacker
Hydraulic & Mechanic Precision Corrective Leveler Configurations
Max strength
Slight trace: 4 mm
Middle track: 6 mm
Heavy track: 25 mm
Max width
Light track: 2400 mm
Middle track: 2400 mm
Heavy tr...
material thickness 0,5 - 3,0 mm
3,0 - 5,5 to.
Bftze7vs2r
decoiler
Edge LCA(W) 1000 line - slitting and cut to lenght line
utomatic lines for coil processing. Machine decoils the metal sheet of thickness from 0.4 to 3 [mm], the coil weight up to 8 000 [kg] and width up to 1.25 [m].
Configuration depends on the customer's specififcation.
The line realize following processes: decoiling, straightening, optionally[slitting/ hole punching], cutting to length, transverse profiling, foiling, stacking on the conveyor belt or stationary table.
Line is dedicated for ...
neu
ca. 12 Wochen ab Auftrags
Spanien
193000
1500 mm
2 mm
20 m/min
15000 kg
decoiler 15 ton
coil transfer trolley
hydraulic hold-down arm
pneumatic feed table
feed guide
7 straightening rolls
Bwwwvqd933
3 quickly adjustable pairs of knives for longitudinal division
cut-to-length shear
drive via servo motor
Technical data:
Revision in 2012
Coils max. width: 250 - 1500 mm
coil thickness: 0,50 - 6,00 mm
max. coil weight: 30 to
diameter coil inside double decoiler: 508 - 610 - 750 mm
diameter coil outside double decoiler: 800 - 1800 mm
Diameter coil inside double decoiler: 508 mm
Speed: 0 - 150 m/min.
Working direction: right to left
Plant consisting of:
Coil loading pallet truck
Double decoiler
Pressure roller and straightening unit with coil table and shears
fixed motorized shear with eccentric bush...
scrap winder (bundle)
Buagtbbhey
strip width: max. 50 mm
strip thickness: max. 4 mm
chamber dimension: Ø 800 x 750 mm
sheet width / mm
plate thickness / mm
cutting speed / m/min
500 mpm
Gpq2nmhfa
DESCRIPTION
Automatic loading and unloading of the coils
Tool for the automatic loading of tools
Hydra-Lock outboard locking system
Automatic feed unit
Programmable spacer positioning
Automatic reel packaging
This is a new machine based on your interests
will be.
with the following equipment:
- automatic adjustment of the splitting blades
- automatic 3-roll straightening machine
- automatic adjustment of the straightening rolls according to material
- swivel straightening machine, straightening in both directions up/down possible
- W-Lan connection for Teamviewer
- with 5 pairs of blades for steel
- pneumatic sheet width adjustment
- Speed max.30 mtr./min. adjustable with potentiometer
- with guillotine shears for cross section
Ctrtofnde
- with SPS touch...
Manufacturer - Cams Shefield
Year - 1987
Bskma8miez
Speed - up to 80 m/min.
Width of sheet - 1250 mm
Thicknes - up to 6 mm
Coiler capacity - 12 tons
Used Grandini cutting line mod. 1,500 x 2 mm:
- 4 top rollers
- 7 rollers (n. 3 upper rollers + n. 4 lower rollers)
- circular shears 3 pairs of blades
- electronic punching (optionals: in assembly)
Mgi0tjjr
- CN new in assembly
- mechanical shear
Delivery: April 2021
Technical data:
Coils max. width: 1000 mm
coil thickness: 0,5 - 2,5 mm
max. coil weight: 10 to
diameter coil inside: 508 / 610 mm
number of straightening rolls: 7 pcs.
diameter of straightening rolls: 120 mm
Diameter rubber rolls: 200 mm
Number of knives: 8 pair
Claoistg
Diameter cutting rollers: 150 mm
Diameter knives: 300 mm
Crested scissors
Recoiler
Coils max. width: 10 - 1000 mm
coil thickness: 3,0 mm
max. coil weight: 10 to
diameter coil inside: 490 - 520 mm
Turnstile
working speed: 50 m/mi...
for aluminium
Co7flk
strip width: max. 1.050 mm
strip thickness: 10 - 20 mic
sheet width / mm
plate thickness / mm
no. of strokes / Hub/min
total power requirement / kW
weight of the machine ca. / t
dimensions of the machine ca. / m
DESCRIPTION
Automatic loading and unloading system
Automatic cutting gap adjustment
Flying guillotine shears
Air float board stacker
Hydraulic & Mechanic Precision Corrective Leveler Configurations
Max strength
Bt8w7x9nm0
Slight trace: 4 mm
Middle track: 6 mm
Heavy track: 25 mm
Max width
Light track: 2400 mm
Middle track: 2400 mm
Heav...
400 - 1250 mm x 0.75 mm, 1.0 mm aluminium, the X-Cut machine not only cuts straight strips lengthwise and crosswise, the automated bevel cut opens up many new possibilities to cut the different surfaces quickly and accurately.
Advantages:
- saves up to 90% of time
- up to 60 degree angle adjustment in both directions
- Intuitive operation through touch screen and calculation aids
- Thanks to optimized software, cuts of trapezoidal surfaces are possible,
triangular surfaces and other surfaces ...
OCEVI STRAIGHTENING & CUT TO LENTH LINE
MANUFACTURER: OCEVISTOCK NUMBER : 13125
BRAND: ITALIAN
BOUGHT/ORDERED: 1994CONDITION VERY GOOD 100% OPERABLE WITHOUT ANY PROBLEM
POWER(kW): 111
LENGTH(m): 38.2
MAX WIDTH(m): 7.71
PRODUCT:
HOT AND COLD ROLLED FLAT STEEL
QUALITY: S235JR and S275JR ac. to EN 10025:2004
COLD ROLLED FLAT STEEL
Benfsf0urt
HOT/COLD DIPPED GALVANISED FLAT STEEL
QUALITY: Z100,Z140 & Z350
THICKNESS RANGE(mm): 0.4 up to 3
LENGTH RANGE(mm): up to 7500
COIL WIDTH(mm): up to 1500
Technical Details :
- Year - 2000
- Thickness - max. 2,00 mm
- Sheet width - 1250 mm
- 12 Rollers
Bd3m8vwxbb
- Decoiler capacity - 10 tons
Coil car
Bgnrmstjbh
American Steel Line
With hydraulic power pack
Table Hydraulic lifting and rotating
Hydraulically moveable on rails
The offer is directed exclusively to traders in the sense of § 14 BGB
strip width: 1.650 mm
strip thickness: 0,4 - 6 mm
No. of slits/strip thickness: 20/1,5 mm, 7/6 mm
reference material (tensile strength): 420 N/mm²
Lrkatok8w
coil weight: max. 25 t
coil ID: 508/610/750 mm
coil OD: max. 1.800 mm
The line never used.The line is in disassembly condition
The photos are examples
Specifications Min. Max.
Thickness (mm) 3.00 15.00
Width (mm) 500 2000
Length (mm) 350 12000
Input Coil Weight (ton)(max.) 30 tons
Input Coil Outer Diameter (mm) 720(min) 2200(max)
Input Coil Inner Diameter (mm) 480(min) 800(max)
Speed of Line (m/min) 30 m/min
Front Straightening Pinchroll 66 kw Motor
Leveller (Hydraulic) 115+115 =230 Kw Two Motors
Leveller Roll Diameter 135 (max)
Leveller Roll Number 13 (...
SLITTING LINE
Brand - Fred Cams (UK)
Width - 800 - 1500 mm
Tickness - 0,50 - 3,00 mm
Coil car - 20 tons
Year - 1975.
Partially reconditioned.
Please see more details on PHOTO.
N3879
Cut-to-length line consisting of:
Double cone decoiler:
Coils max. width: 1600 mm
max. coil weight: 35 to
Straightener:
Manufacturer: GOTHA UBR 1600 x 20 mm
Number of rolls: 11 pcs.
Scissors:
Manufacturer: STEINER 1800 x 25 mm
Technical data:
plate width: 1600 mm
sheet thickness: 6 - 20 mm
Stroke rate: 1 - 15 strokes/min.
Standard speed: 10 m/min.
Straightening roller diameter: 160 mm
Adjustment: 10 - 40 mm
Coil weight: 35 to
Engine power: 115 kW
Total weight: approx. 85 to
Space requirement: ap...
Technical Details :
- Brand Name - LDM
- Max. Speed - 60m /min.
- Coils Weight - 15 tons
- Strip Thickness - 0,8 - 4,0 mm
Bbkmnbmmgq
- Sheet with - Max 1500 mm
- Power - 150 kw
A compact machine for the decoiling, straightening, slitting, and cutting of rolls of zinc, copper, steel, aluminium, stainless steel, and other metals. Fully welded steel construction, compact design with electronic controls.
Standard version
- Straightening unit with 4 rolls and 2 vulcanised feeding rolls, gear driven
- PLC-control: easily programmable with 4 program lines for length and quantity
- Controls on left or right side
- Length measuring with wheel and encoder
- Stable mechanical gu...
slitting line with round-off machine
G0sg27f
strip width: 105 - 280 mm
strip thickness: 0,5 - 6 mm
coil weight: 5 t
coil ID: 508 mm
Technical Details :
- Sheet thickness - 0,5 - 2,0 mm
Njtbd
- Sheet width - 1320 mm
- Decoiler capacity - 10 tons
- Speed - 60m/min.
strip width: 1.040 mm
strip thickness: 0,2 - 0,8 mm
coil weight: 11 t
Bjqyi8gj
coil ID: 150/400/600 mm
Straightening and Cut to length machine
Manufacturer OCEVI, Italy
Manufactured 1994
Stock list Nr 1396
Condition Very good
Power (kW) 405.66
LENGTH(m) 42.5
Max. Width (m): 9.26
Application
Bgnswtjcju
THICKNESS RANGE(mm): 2 up to 14
LENGTH RANGE(mm): up to 14000
COIL WIDTH(mm): 175 up to 2000 Material
Material HOT ROLLED FLAT STEEL QUALITY: S235JR & S355J2 ac. to EN 10025:2004
COLD ROLLED FLAT STEEL
HOT/COLD DIPPED GALVANISED FLAT STEEL QUALITY: Z100,Z140 & Z350
HOT ROLLED FLAT STEEL WITH SURFACE...
design: eccentric
strip width: max. 830 mm
Bte8kfswf3
strip thickness 0,75 - 6 mm
OCEVI STRAIGHTENING & CUT TO LENTH LINE
- POWER(kW): 111
- LENGTH(m): 38.2
- MAX WIDTH(m): 7.71
- PRODUCT: HOT AND COLD ROLLED FLAT STEEL
QUALITY: S235JR and S275JR ac. to EN 10025:2004
COLD ROLLED FLAT STEEL
HOT/COLD DIPPED GALVANISED FLAT STEEL
QUALITY: Z100,Z140 & Z350
- THICKNESS RANGE(mm): 0.4 up to 3
- LENGTH RANGE(mm): up to 7500
Gv0zrw
- COIL WIDTH(mm): up to 1500
design: rotary shear
strip width: 500 - 1.650 mm
Bte8bhpnm8
strip thickness 0,3 - 2 mm
TECHNICAL DETAILS :
– Speed – 95 m / min.
Bgzopwfp99
– Max. Thickness – 6 mm
– Max. Hardness of sheet metal – 700 N/mm2
– Max. width of Sheet – 1850 mm
– Year – 1997
– Pay of capacity – 12 tons
strip width: 500 - 1.600 mm
O30fj
strip thickness: 0,6 - 3 mm
coil weight: 7,5 t
mandrel Ø: 508/610 mm
strip width 500 – 1.300 mm
Lrmk0dd0p
strip thickness 0,5 – 2 mm
reference material (tensile strength) 500 N/mm²
coil weight max. 15 t
coil-dia max. 1.800 mm
plate length 400 – 4.500 mm
speed max. 60 m/min
sheet width 500 – 1.600 mm
sheet length max. 4.500 mm
stacking weight max. 3 t
stacking height (with pallet) max. 500 mm
speed max. 40 m/min.
Cv99p3xs
5 t, Coil ID 508 mm
Cczooha
1.500 x 0,5 - 3 mm
5 t, Coil ID 508 mm
50 - 750 x 0,4 - 6 mm
Powzjkahk
sheet width 500 – 2.050 mm
sheet thickness 2 – 12 mm
Ciysy3u
sheet length 1.000 – 8.000 mm
stacking weight max. 8 t
stacking height 400 mm
strip width: 300 – 2.000 mm
Mu78rc
strip thickness: 0,5 – 3 (4) mm
reference material (tensile strength): 550 N/mm²
coil weight: max. 30 t
coil ID: 508/610 mm
coil OD: max. 2.000 mm
strip width: 500 – 2.050 mm
strip thickness: 12 mm
Glywzsfz3
section shear with pinch roll unit for corrugated sheet
Lfcah
blade length 1.400 mm
profile width approx. 1.000 mm
profile height approx. 160 mm
strip width 1.600 mm
strip thickness 0,3 - 3 mm
reference material (tensile strength) 420 N/mm²
speed 68 m/min. at 6.000 mm plate length
Lu3fy2ofy
23 m/min. at 400 mm plate length
strip width (recoiled) 500 – 1.600 mm
strip thickness 0,5 – 3 mm
reference material (strength) 500 N/mm²
coil weight max. 20 t
coil inner-Ø 508/610 mm
coil-outer-Ø 1.800 mm
plate length 500 – 6.000 mm
stacking weight max. 5 t
Q2dlqnpl
speed 35 m/min
working direction left - right
strip width: 600 - 1.600 mm
Btezl7skzj
strip thickness: 0,4 – 2 mm
edge trimming width: 5 - 60 mm
speed: approx. 60 m/min
banding line for slitting line
5 t, coil OD 2.000 mm
Btezgr7fqx
30 - 640 x 0,4 - 3 mm
Used Longitudinal/transverse pitch plants
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Photo gallery: The World's 10 biggest excavators
Morlock Motors official partner of Machineseeker and Truckscout24
10 valuable tricks for buying used machines online
How to receive 100% of our e-mails
Sample sales contract for used machines in nine languages
