Machine weight 100000 kg
Stamping force 8000 kN
Outer length 2500 mm
Outer width 1700 mm
This LOIRE SAFE Edim 800 Stamping Machine was manufactured in Spain in 1996. It can work with a stamping force of 8000 kN, stroke of 1600 mm, and comes with a table of 2500 x 1700 mm.
Copying and coordinate nibbling machine make TRUMPF type CN 701, machine # 1118
horizontal projection 1550 mm
working area 1250 x 1300 mm
1250 x 2000 mm
smallest circular cut-out with copying nibbles 12 mm
smallest circular diameter with inner round guide
with shearing 56 mm
smallest round diameter with inner round guide
65 mm for nibbling
infinitely variable stroke rates 350-1400 H/min
working height 1020 mm
drive power 2,2 kW
outer dimensions approx. 2900 x 950 x 21...
sheet width 1300 mm
plate length 1000 mm
plate thickness 6 mm
punching force max. 75 kN
stroke 11 mm
Required air-pressure 6 bar
throat 1000 mm
weight of the machine ca. 2,6 t
dimensions of the machine ca. 2450 x 950 x 2080 mm
Hand punch, hand punch, eccentric punch, hand lever punch, spindle punch, hole punch
-Stamp diameter: up to 10 mm
-Material thickness up to: 6 mm
-Strength up to: 450 N/mm²
-Dimensions: 210/110/H1170 mm
-Weight: 11.5 kg
Hydraulic punching machine
Fab. Boschert Typ. ECCO-LINE 750
Very good condition, year 2011
Type: ECCO-LINE 750
Year of manufacture: 2011
Max. sheet thickness: 12,7 mm
Max. punching force: 28 t
Max. stroke sequence: 100 strokes / min
Max. Punching diameter Ø: 105 mm or any shape within 105 mm / 74 mm
Optional 92 x 92 mm
Tool change time: 15 sec. man.
Punching accuracy: with scales + - 0,2 mm
with digital display + - 0,1 mm
dimensions: 3400 x 1580 x 1600 mm
Guillotine Boschert EL500
Tools Gr.III = diameter 105 mm
Punching power: 280 kN (28 tons)
Punching arm fully extended 560 mm
Side stop 1000 mm right/left
Extended stroke 90 mm also for profiled material suitable
Total weight 2700 kg
Punching machine (40 tons) incl. tools
Type: hole punching machines
Model: PL 150 Digital
Punching power: 40 tons
Reach: 850 mm
Table left side: 1.700 mm
Table right side: 3.200 mm
incl. lots of tools (Trumpf system):
round: 4,5 - 70 mm
square: 10 - 51 mm
ready for your test
Controlled stop defective
Location: Southern Germany
Availability: on demand
Punching pressure: 100 to
ram stroke: 200 mm
ram surface: 1000 x 800 mm
Adjustment travel for fixed stop: 133 mm
installation height: 450 mm
column passage in front: 1060 mm
column passage sideways: 400 mm
table surface: 1000 x 800 mm
table height: 850 mm
table recess: 300 x 650 mm
T-slots in table: 18 H 11
T-slots in ram: 18 H 11
Rapid feed speed set value 350 mm/sec.; actual value 384 mm/sec.
Pressing speed set value 21-33,8 mm/sec.; actual value 35 mm/sec.
A used punch is sold. For the year of manufacture is unfortunately no information available. The machine is fully functional and has lots of punches and dies. The tool cabinet is not included in the offer, only the tools themselves.
with Trumpf tool system, manual tool change, tools with PU scrapers, including numerous round, square, oblong hole and cutting dies, including tool presetter, the fence rails are manually using a embedded in the table scale at the table set and clamped, the hub is triggered via foot pedal fully hydraulic
Machine repaired by a qualified technician, tested, clean and is fully functional. Test run is performed
Steel thickness: 6,0 mm
Punching pressure: 200 kN
Total power c...
Guillotine Boschert EL300
AMADA tool system
tool station D diameter 88.9 mm
New tool adapter A / B / C station
Punching power: 280 kN (28 tons)
Punching arm RADIUS 350 mm
Side stop 500 mm right/left
Depth gauge with digital display
Page attacks new,
Weight 2300 kg
Punching pressure: 30 to
max. sheet thickness: 10,0 mm
stroke: 120 mm
punching diameter max.: 105 mm
table size: 1050 x 835 mm
throat: 560 mm
motor power: 4 kW
dimensions (length x width x height): approx. 1100 x 1200 x 1700 mm
Machine weight: approx. 2,5 to
Die cassettes: 5 pcs.
die holder system BOSCHERT: 4 pcs.
Positioning rings: 4 pcs.
Round punches in different sizes with dies: 77 pcs.
Square punches in different sizes with dies: 14 pcs.
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this website are subject to change and non-binding!
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not assume liability for the content of linked external websites.