Used laser cutting machines over 4000mm (x-travel) for sale (95)

Condition: used, Year of construction: 2022, Well-maintained Bystronic BySmart Fiber 4020 12 kW fiber laser cutting machine with a large-format 4,000 × 2,000 mm table. Equipped with the intuitive ByVision Cutting control system and suitable for high-speed, high-precision processing of steel, stainless steel, aluminum, brass and copper. Machine can be inspected under power by appointment. Additional pictures, videos and technical documentation available upon request. Key Specifications - Working area: 4,120 × 2,110 mm - Sheet size: 4,000 × 2,000 mm - Max. positioning speed: 140 m/min - Max. workpiece weight: 1,900 kg - ByVision Cutting touchscreen control - V2 laser cutting head - Incl. nozzle changer, beamshaper, detection eye en mixgas - Prepared for connection to an N₂ nitrogen generator Cutting Capacity - Mild Steel: up to 25 mm - Stainless Steel: up to 30 mm - Aluminum: up to 30 mm - Brass: up to 15 mm Fodezz A Nzepfx Ah Ejgi - Copper: up to 12 mm Machine Information - Operating hours: 11,650 h - Cutting hours: 3,900 h - Year of Manufacture: 2022 - Condition: Very good - Location: Eastern Germany - REC Care service contract, 2x annually Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! * Working area: 4,120 × 2,110 mm * Sheet size: 4,000 × 2,000 mm * Max. positioning speed: 140 m/min * Max. workpiece weight: 1,900 kg * Year of Manufacture: 2022 * Condition: Very good * Cutting hours: 3,900 h * Operating hours: 11,650 h * Location: Eastern Germany

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 200 h, machine/vehicle number: 2509328, laser source manufacturer: Raycus 12,0 KW, laser power: 12,000 W, overall weight: 27,750 kg, Equipment: CE marking, documentation/manual, dust extraction, emergency stop, nozzle changer, safety light barrier, HEZINGER LaserLine HLC 2060 – 12 kW – Year of manufacture 2025 – only approx. 200 operating hours For sale is a virtually new HEZINGER LaserLine HLC 2060 fiber laser cutting system, year of manufacture 2025, with a powerful 12 kW Raycus laser source. The system has been used very little – according to the operator, approximately 200 production/operating hours – and is currently connected and ready for demonstration in 56736 Kottenheim (Germany). Fodpfx Aho Ahzcxs Ejgi Technical data / equipment: • Cutting area: 6,100 × 2,000 mm • Laser power: 12 kW • Laser source: Raycus • Cutting head: RayTools BM115 • CNC-controlled exchange table • Table load max. 4,000 kg • Axis speed up to 150 m/min • Acceleration up to 4 g • Automatic 8-position nozzle changer • Laser beam camera • Automatic nozzle cleaning and head calibration • Automatic sheet metal correction • Bomaksan filter/extraction system • Scrap conveyor with side outlet • S&A laser cooler • Libellula Wizard • Remote control • CE version Machine dimensions approx. 16,725 × 5,020 × 2,600 mm, machine weight approx. 27,750 kg. These data correspond to the manufacturer's documents. 435814a5-b20b-4a55-b672-8590139… The system offers an interesting alternative to a new order, especially for companies that require a high-performance 12 kW laser cutting system in the large format of 6 × 2 m in the short term. Inspection and demonstration under production conditions are possible by appointment. Location: 56736 Kottenheim, Germany Availability: short-term Technical specifications based on manufacturer's documents or operator's information. Subject to errors and prior sale.

Condition: good (used), functionality: fully functional, Year of construction: 2018, table length: 4,000 mm, table width: 2,000 mm, overall weight: 6,140 kg, total length: 5,900 mm, total width: 2,900 mm, total height: 2,350 mm, Equipment: CE marking, documentation/manual, Bystronic Bytrans Extended 4020 automated loading and unloading system, dismantled by a specialist company from a Bystronic laser system. The automation system was installed on a Laser Bysprint Fiber 4020. Manuals are included with the supply. Fgjde Ah Hpbjpfx Ah Esi

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: K990424, type of input current: three-phase, type of cooling: air, overall weight: 600 kg, total length: 15,000 mm, total width: 10,000 mm, total height: 2,000 mm, Equipment: CE marking, documentation/manual, emergency stop, Laser Bystronic BTL 4020 – Professional sheet metal cutting equipment Fortza.ro is offering for sale a Bystronic BTL 4020 laser, professional equipment designed for sheet metal cutting, with a cutting capacity of up to 15 mm thickness. The machine also offers the possibility of cutting tubes with a diameter of up to 140 mm, as well as an automatic sheet loading system, to streamline the work process. Condition: Functional Manufacturer: Bystronic Laser AG, CH-3362 Niederönz, Switzerland Model: BTL 4020 Year of manufacture: 2018 Order number (Job No.): K990424 Equipment number (Machine No.): 1214 Country of origin: Switzerland Technical specifications Maximum sheet metal cutting thickness: 15 mm Maximum diameter for tube cutting: 140 mm Automatic sheet loading: Yes Power supply: 3 × 400 V, three-phase Frequency: 50 Hz Electrical power: 80 kW Maximum current: 125 A Maximum current of the largest consumer: 63 A Marking: CE – complies with European standards Total weight: 600 kg Fodpfjz H Uihox Ah Ejgi

Condition: used, Year of construction: 2023, For Sale: Mazak OPTIPLEX 4020 FIBER III Fiber Laser Cutting Machine Offered for sale is a Mazak OPTIPLEX 4020 FIBER III, manufactured in 2023 and built by the renowned Japanese machine tool manufacturer Yamazaki Mazak Corporation. This modern fiber laser cutting system combines high productivity, precision, and reliability, making it suitable for a wide range of sheet metal processing applications. Technical Data - Manufacturer: Yamazaki Mazak Corporation - Model: OPTIPLEX 4020 FIBER III - Machine Type: Fiber Laser Cutting Machine - Year: 2023 - Machine Weight: Approx. 5,300 kg - Origin: Japan - Cutting hours : 2592h - Operating hours : 5110h Technical Specifications - Working Area: 4,000 x 2,000 mm - Laser Technology: Fiber Laser - CNC Control: Mazatrol Preview G / Smart Factory compatible - Automatic Focus Cutting Head Fjdpfx Ahez Ia Ulj Eegi - High-Speed Linear Drives - Intelligent Nozzle Change System - Automatic Cutting Condition Optimization - Energy-Efficient Fiber Laser Source - Advanced Collision Protection - Integrated Process Monitoring Availability: Immediately Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! * Manufacturer: Yamazaki Mazak Corporation * Model: OPTIPLEX 4020 FIBER III * Machine Type: Fiber Laser Cutting Machine * Year: 2023 * Machine Weight: Approx. 5,300 kg * Working Area: 4,000 x 2,000 mm * Laser Technology: Fiber Laser AVAILABILITY: IMMEDIATELY * Cutting hours: 2592h

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, laser type: diode laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 10 h, laser power: 24,000 W, warranty duration: 6 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, safety light barrier, Standard Equipment Machine - Work area: 4000 x 2000 mm - Enclosed machine frame - Longitudinal conveyor belt - Motion unit for highly precise machining - Gantry drive in combination with linear direct drives - Cooling unit for machine and laser (water-air) - Work area lighting - Positioning laser diode - Spray device - Automatic nozzle cleaning - Integrated control cabinets - Integrated cabinet - Enclosed beam guidance via laser light cable (LLC) - Machine status indicator - Machine for ambient temperatures up to 45 °C - Transport and assembly device TRUMPF Laser - Excitation via pump diodes - Laser power control Cutting Head - Universal cutting head with fully adaptive lens system - Protective glass - Online condition monitoring of the protective glass - Dynamic Focus Control - Automatic nozzle centering Control System - Fast re-production - SINUMERIK control system - Ergonomic control panel with 21.5″ wide- screen multi-touch color display - Integrated technology data - Automatic shutdown - Programmable gas selection for pressure/cutting - Microweld - Remote support interface - Production plan - Multi-sheet processing - Condition Guide - Cutting Guide Functions - AdjustLine - BrightLine fiber - Smart Nozzle Automation - DetectLine - Drop&Cut - Integrated camera 1 for process monitoring - ControlLine - FlyLine - PierceLine - PlasmaLine - High-speed cutting package - High-speed cutting package Eco - Copper cutting package - Brass cutting package Data Transfer - USB interface - RJ-45 network interface - Online Update Manager Safety - CE marking and EC Machine Directive - Light barriers - Multi-chamber extraction system - Electric roll-up roof - Machine enclosure with certified viewing window door on the right and left Extended Standard Equipment - Compact dust collector - Support strips made of structural steel - Automatic pallet changer in longitudinal direction (standard/heavy-duty) Fgsdpfxs Afxu Sj Ah Esi - Nanojoints - Smart Rerun Extended Machine Equipment Extended Laser Equipment - External solid-state laser TruDisk 24001 with BrightLine fiber - Separate laser power supply Additional Cutting Packages - High-speed cutting package Eco - Sheet thickness extension cutting package Extended Machine Equipment - Machine for ambient temperatures up to 45 °C - Prefilter for gases N2 + O2

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser hours: 6,900 h, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, power: 10 kW (13.60 HP), year of last overhaul: 2024, working range: 4,020 mm, Equipment: cooling unit, documentation/manual, safety light barrier, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series with the following features: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic exchange table • Fully automatic drilling spindle HSK 63 • High-performance Donaldson DFPRO 6 filter system with 7.5 kW Technical data: Machine designation: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Fjdpsvw Tdlofx Ah Eegi Drives: maintenance-free Panasonic AC servo motors Traverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Positioning speed of the Z-axis: 18 m/min Travel range of the Z-axis: 150 mm Acceleration of the Z-axis: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90 % Laser cutting head EX-TRABEAM® Pro Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical data: Drilling from/to: Ø 4 mm - Ø 30 mm Threading from/to: M5 - M20 max. material thickness: up to 25 mm* Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Automatic measurement of drilling tools Pneumatic clamping device Brush for removing drilling chips Donaldson® filter system DFPRO 6 Cyclopeel Fan power: 7.5 kW Volume flow: 4,500 m³/h Asper Nesting® | Automatic nesting software With Witt gas mixer Machine was always operated with a maintenance and support contract.

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 20,141 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 10 mm, input voltage: 400 V, compressed air connection: 7 bar, overall weight: 15,000 kg, total length: 12,000 mm, total width: 6,000 mm, total height: 2,000 mm, workpiece length (max.): 4,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 75 mm, space requirement height: 2,000 mm, space requirement length: 12,000 mm, space requirement width: 6,000 mm, working range: 4,150 mm, Manufacturer: Trumpf Model: Trumatic 4030 Beam operating hours: 20,141 h Last service: May 2025 Length: approx. 12 m Width: approx. 6 m Height: approx. 2 m Power: 4 kW X-axis travel: 4,150 mm Y-axis travel: 2,140 mm Z-axis travel: 117 mm Max. material thickness: Steel: 20 mm Fgjdew Tt Nwepfx Ah Eoi Stainless steel: 12 mm Aluminium: 10 mm Year of manufacture: 2006 Connected load: 88 kVA Condition: Good - Everything works For further questions, please call or send an email. Loadmaster is not included Available from 01.10.2025

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser type: CO₂ laser, laser power: 2,700 W, X working range max.: 6500 mm Y working range max.: 200 mm Laser power: 2700 watts Control system: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TruFlow 2000, high-frequency powered, cooling unit - Drives: Maintenance-free three-phase AC servomotors - NitroLine high-pressure cutting - Fast processing with SprintLine - Cutting gas pressure setting programmable Fgjds Ahkc Tjpfx Ah Eei - Laser cutting head with 5’’ lens - Cutting head quick-change system - Laser power control - Laser logbook function - Automatic shutdown - Work area lighting - Control system Sinumerik 840D: Open control system based on PC, easy operation, online help, diagnostic function, maintenance logbook, technology data, remote service, 3.5’’ floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, beam guidance completely enclosed and ventilated, compact dust collector, protective cabin - Unloading station PRS 3001 with brush table - Clamping jaw set D 20-85mm and D 85-150mm Optional equipment: + 2000 on Laser TruFlow 2700 + SeamLine Tube + LoadMaster Tube 6.5 m with bundle trough + Unloading station 6m with belt table + Focus line

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 22,500 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Rofin, laser source model: DC 025, laser power: 2,500 W, pipe diameter (max.): 140 mm, pipe length (max.): 8,500 mm, table length: 8,500 mm, working length: 8,500 mm, travel distance X-axis: 8,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 95 mm, workpiece weight (max.): 4,000 kg, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 10,000 kg, total length: 17,536 mm, total width: 4,604 mm, total height: 2,237 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, 2006 BLM Adige LT712D Tube Laser Machine Manufacturer: BLM Adige Machine Model: LT712D Laser: Rofin Sinar series DC K 2.5kW Laser source. Year: 2006 Infeed: 8,500mm Outfeed: 6,500mm Condition: Very Good Fedpjx Ddagefx Ah Esgi Hours: 22,500hrs Availablility: Immediately This 2006 BLM Adige LT712D is a high-performance CNC tube laser cutting system designed for precision processing of mild steel, stainless steel, and aluminium tube profiles. Known for its reliability and accuracy, the LT712D is one of the most capable mid-range tube laser platforms, delivering clean, repeatable cuts with full automation from loading to unloading. With only 22,500 operating hours, this machine is in very good condition and has been maintained to OEM standards. It offers exceptional value for fabrication companies, structural steel specialists, subcontractors and manufacturers looking for a high-precision tube laser with proven durability. ⭐ Key Machine Specifications Working Capacity & Tube Dimensions Minimum tube length: 3,200 mm Maximum tube length: 8,500 mm Round tube diameter: Ø12 – Ø140 mm Square tube: 12 – 120 mm side dimension Rectangular / flat-oval: up to 170 mm circumscribed circle, min. side 10 mm, max. side 140–150 mm Max bar weight: Linear: 15 kg/m Total (L=8500 loader): 130 kg Machine Dimensions & Weight System footprint (L=8500 version): 17,536 × 4,604 × 2,237 mm (complete system) 13,595 × 4,604 × 2,237 mm (machine body) Machine weight: approx.10000 daN (= 10 tonnes) Laser, CNC & Automation CNC Control: Siemens Sinumerik 840D Laser Source: Rofin DC-K Series Cutting Head: Autofocus head with capacitance sensor + collision protection Working Axes: X travel: 8,500 mm Y travel: 400 mm Z travel: 95 mm A-axis: spindle rotation A1-axis: steady rest rotation V-axis: Bar support on the machining line (90mm) W-axis: Unload piece support (85mm) X1-axis: steady rest travel (610 mm) Loader & Unloader Automatic bundle loader with alignment, measuring & singularisation system Scimitar-style tube transfer system for smooth transition to machining line CNC-controlled tube support system with 5 active support groups Intelligent cut-piece unloader with conveyor belt for short parts up to 300 mm Extraction & Cooling Systems Fume extraction: 2,000 m³/hr with high-efficiency filtration system Cooling: MTA TAE 121 chiller, 260-litre cooling circuit reserve Hydraulics: 25-litre tank, 25 L/min pump, 70 bar system pressure 🟢 Condition & Availability Year: 2006 Hours: 22,500 (very low for a tube laser) Condition: Very Good – well maintained, clean, fully operational Availability: February–March 2026 Includes: Full machine, loader, unloader, chiller, documentation supplied. Why the LT712D Is a Top Choice The BLM Adige LT series is widely regarded as the benchmark for tube laser systems. This LT712D stands out thanks to: ✔ Exceptional tube cutting accuracy ✔ Reliable automatic loading & unloading ✔ High-quality Rofin laser source ✔ Full CNC control of every movement ✔ Capability to handle a wide range of profiles ✔ Heavy-duty industrial build quality (10 tonnes of rigidity) For fabricators looking to increase productivity, quality, and automation, the LT712D is an ideal investment. Notes: *Specifications are given in good faith but not guaranteed*

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 5,666 h, laser hours: 5,666 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 12 mm, positioning speed: 100 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 3,280 kg, power: 6,000 kW (8,157.72 HP), overall weight: 27,700 kg, total length: 22,450 mm, total width: 6,670 mm, total height: 2,565 mm, working range: 20,248,100 mm, Equipment: cooling unit, It is a machine with low operating hours and no faults. All its parts are original, and its maintenance has been performed by the authorized service center. Fgedpfswpii Tox Ah Eji

Condition: good (used), functionality: fully functional, Year of construction: 2006, AMADA LC-2415 ALPHA IV NT 2.5 kW Specification Details Manufacturer: AMADA Model: LC-2415 ALPHA IV NT Fede Abrlpjpfx Ah Eogi Year of Manufacture: 2006 Condition: Used Machine Type: CNC CO₂ Laser Cutting Machine Laser Power: 2.5 kW Laser Type: CO₂ laser Laser Oscillator: FANUC AF2000i-C / AF2000E-LU2.5 CNC Control: AMNC-F / FANUC Total Operating Hours: 25,729 h Working Range – X Axis: 2,520 mm Working Range – Y Axis: 1,550 mm Working Range – Z Axis: 300 mm Maximum Processing Dimensions: 5,040 × 1,550 mm with one repositioning Maximum Table Load: 330 kg Maximum Cutting Speed: 20 m/min Maximum Positioning Speed – X/Y: 80 m/min Maximum Positioning Speed – Z: 60 m/min Positioning Accuracy: ±0.01 mm / 500 mm Repeat Positioning Accuracy: ±0.005 mm Maximum Sheet Thickness – Mild Steel: Up to 12 mm* Maximum Sheet Thickness – Stainless Steel: Up to 6 mm* Maximum Sheet Thickness – Aluminium: Up to 6 mm* Drive System: AC servo motors Number of Controlled Axes: 3 (X, Y, Z) Laser Wavelength: 10.6 μm Laser Beam Mode: TEM₀₀ equivalent Beam Divergence: < 2 mrad Laser Stability: ±1% Cutting Speed: 0–20 m/min Assist Gas Connections: 3 Automatic Gas Pressure Control: Yes Automatic Focus Adjustment: Yes Automatic Sheet Repositioning: Yes Automatic Sheet Loading/Unloading: Depending on configuration Cutting Head: HS-2003 Adaptive Optics: ActiveCut High-Pressure Cutting System: CleanCut Specification Details Aluminium Cutting System: ALUCUT Extraction System: Included / depending on configuration Cooling Unit: Included Power Supply: 400 V / 50 Hz / 3-phase Compressed Air Requirement: Approx. 250 l/min at 6 bar Machine Length: 5,745 mm Machine Width: 2,630 mm Machine Height: Approx. 2,150–2,275 mm* Machine Weight: Approx. 7,500 kg Laser Class: Class 1 during intended operation * - The actual maximum sheet thickness that can be processed depends on the material, its quality and processing conditions.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Operating hours: 28,000 h Fgodpfxoy Rnb Ds Ah Esi

Condition: good (used), Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Control: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: Fgodpfx Aj Ahi Trjh Eei + Upgraded to Laser TruFlow 3200 + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Operating hours: approx. 3,000 h Fedpfx Asy Nl U Seh Ejgi

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, laser power: 6,000 W, CNC laser cutting machine TruLaser 3040 Fiber (L50) 6000 Watt X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 115 mm Fedpfx Aez Rl Eieh Eogi Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 20 mm Sheet metal thickness copper max.: 8 mm Standard equipment Standard features Machine - Closed machine frame - Integrated cabinet with roller shutter - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLC) - Cooling unit - Integrated control cabinets with internal lighting - Automatic sheet metal changer in longitudinal direction - 19" touch color screen - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk 3001 with one LLC output - Excitation via pump diodes - Laser power control Cutting head - Universal cutting head - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet metal edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - TruTops Laser via network access - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - FastLine - FlyLine - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust collection system - Machine enclosure, certified viewing window, door on the right - Sliding roof - Nozzle changer - CoolLine

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. Fodozg D I Ajpfx Ah Eogi NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes.

Condition: ready for operation (used), Year of construction: 2024, laser power: 20,000 W, travel distance X-axis: 9,050 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 120 mm, number of axes: 6, This 6-axis CUTLITE PENTA PLUS LM 9030 was manufactured in 2024. It features a powerful 20,000 W RAYCUS fiber laser with an impressive X-axis working range of 9,050 mm and Y-axis working range of 3,050 mm. The machine includes advanced capabilities such as a BEVEL autofocus cutting head and a double pallet system. If you are looking to get high-quality cutting capabilities, consider the CUTLITE PENTA PLUS LM 9030 fiber laser cutting machine. Contact us for further details. • Laser source: RAYCUS Fiber Laser • Working range: • BEVEL working area: 8,500 × 2,500 mm • Dynamics: • Maximum speed: 140 m/min • Maximum acceleration: 2.5 G • Precision: • Mechanical accuracy: ±0.05 mm / 500 mm • Position repeatability: ±0.02 mm • Cutting head / axes: • BEVEL autofocus cutting head • B/C-axis rotation range: ±45° • Non-contact capacitive sensor • Automatic focus adjustment Fgodpfoz I Rlhex Ah Eoi • Maximum assist-gas pressure: 20 bar • Automatic nozzle cleaning and capacitive sensor calibration • Control: • CNC: D.Electron Florenz Z32 • Machine supervision: Smart Manager 6 • Industrial PC with Windows 11 • 22" Full HD touchscreen • Connectivity: Ethernet, USB 3.0, Wi‑Fi • Industry 4.0 / MES integration capability • Installation requirements: • Power supply: 400 V • Recommended compressed-air pressure: 10 bar • Assist gases: Oxygen / Nitrogen / Air Additional equipment • Automatic LIFT pallet changer • Double pallet system • Chiller • Compressed-air filter • Internal monitoring camera • Standard fume extraction system • Automatic assist-gas change • Automatic sheet recognition • Lantek post processor for BEVEL cutting • Full-table protective enclosure

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, Bystar 4025 NT 80 for sale C02 laser 4.4kW Bylaer resonator Fjdjzw Em Iepfx Ah Ejgi Fully operational and can be seen in production Machine includes Dust extraction and chiller Also included is an additional Bylaser 4400 (4.4kW) Perimeter light guards The machine is unique in that it has two 8000mm change over tables that feed the 4025 machine, two extension work areas at each end of the machine as can be seen in the pictures allowing an 8000mm cutting area. Please feel free to contact if you require any additional information, currently in production but will be available for decommission in November due arrival of new machine.

Condition: good (used), Year of construction: 2013, laser cutter: TruLaser 3040 Machine type: CO2 Laser Year: 2013 Software: TRUMPF CNC basierend auf SINUMERIK 840D sl Working hours: Strahl 31.822 h h Working hours: Laser 62.603 h h SPECIFICATIONS Fgsdpfx Ahezi Arfs Eei laser: TRUFLOW 4000 laser capacity: 4.000 W W Travel X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 115 mm Max. workpiece weight: 1.700 kg Genauigkeit Maximale Positionsstreubreite Ps max: +/-0.03 mm Positionsabweichung Pa: +/-0.05 mm Kleinstes programmierbares Wegmaß: 0.001 mm max. Sheet Thinkness Steel : 20 mm Stainless steel : 15 mm Aluminum : 10 mm Lasergasverbrauch HE (4.6): 13 l/h CO2 (4.5): 1 l/h N2 (5): 6 l/h Anschlussleistung Maschine: 62 kVA Anschlussleistung Kühlaggregat: 26 kVA Req. space (LxBxH): 12 x 5,3 x 2,2 m Weight: 14.500 kg Equipment geschlossener Maschinenrahmen Palettenwechlser LiftMaster Längsförderband Lichtschranken Bedienpult mit Touchscreen Leider können wir hierfür keine Dienstlesitungen anbieten

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,500 h, laser power: 6,000 W, travel distance X-axis: 4,064 mm, travel distance Y-axis: 2,032 mm, travel distance Z-axis: 100 mm, number of axes: 3, This 3-axis Salvagnini L3-4020 fiber laser cutting machine was manufactured in 2017. It features a powerful 6.0 kW solid-state fiber laser source, with a maximum working range of 4064 mm in the X-axis and 2032 mm in the Y-axis. The machine includes advanced automation components for efficient material handling and cutting. If you are looking to get high-quality sheet metal cutting capabilities, consider the Salvagnini L3-4020 machine we have for sale. Contact us for further details. • Height adjustment: 980 mm • Table load: 1250 kg • Laser Cutting Head: Patented "Dry Cooling" focusing head with auto-focus 210 mm lens and capacitance anti-collision profiling • Main electronic connection: 400 V / 50 Hz • Power consumption: 27 kWh • Year of Order Confirmation: 2017 • Machine Type: Fiber Laser Cutting Machine • Application Type: Sheet Metal Cutting • Maximum Axis Acceleration (X / Y): 1.5 g / 2.0 g • Material Cutting Capacity (Maximum Thicknesses): Mild Steel 25 mm, Stainless Steel 20 mm, Aluminum 20 mm, Copper 8 mm, Brass 8 mm Fgodpfx Ahezk D Hmj Eoi • MTW4020.V5 Five-position storing module (Max capacity 3000 kg per tray) • Motorized Scissor Table (Max capacity 3000 kg) • Connection for automatic sheet loading and unloading (Unloading comb matrix) • Extra bay lengthened main automation structure • LTS4020 Tray supporting station with leafing magnets • MCL40 Cartesian Manipulator / Stacker with dual rotating gripping devices (Max part capacity: 65 kg single / 130 kg dual) • MCL Magnet kit (10 magnets total for picking up perforated or small parts) • TCV4020 Stacking Scissor Table (Max capacity 5000 kg, 1000 mm stroke) • CCVT40 Motorized Carriage (Short side mobile, max capacity 5000 kg) • PPC4020 Gantry Mobile Carriage & PMC4020 short-side mobile carriage • APC2 Adaptive Process Control (Double-channel sensor reading piercing spectrum and cutting losses) • AVS Artificial Vision System (HD camera for parts referenced program generation from dxf/dwg) • ANC Automatic Nozzle Change (8-position nozzle carrier with integrated cleaning brush) • GF Interchangeable grids with mild steel slats & CRS Scrap collection bins • ASF Fume Extraction unit with high-efficiency filtering sleeves, pneumatic cleaning, and integrated spark trap

Condition: ready for operation (used), Year of construction: 2014, operating hours: 35,000 h, laser power: 6,000 W, travel distance X-axis: 4,090 mm, overall weight: 24,500 kg, total width: 7,700 mm, total height: 2,400 mm, product length (max.): 15,000 mm, number of axes: 3, CO2 laser cutting machine manufactured in 2014. This Bystronic ByAutonom 4020 features a powerful ByLaser 6000 with a cutting range of 4090 mm x 2060 mm x 80 mm. It has a maximum workpiece weight of 1580 kg and can handle sheet thicknesses of up to 25 mm for steel and stainless steel. If you are looking to get high-quality cutting capabilities, consider the Bystronic ByAutonom 4020 machine we have for sale. Contact us for further details. - Cutting Range X-axis: 4,090 mm- Nominal Sheet Size X-axis: 4,000 mm- Cutting Range Y-axis: 2,060 mm- Cutting Range Z-axis: 80 mm- Max. Positioning Speed Parallel X/Y: 120 m/min- Max. Positioning Speed Simultaneous: 169 m/min- Max. Axis Acceleration: 30 m/s²- Cutting Hours: Approx. 14,500 hours- Overall System Length (L): Approx. 15,000 mm- Overall System Width (W): Approx. 7,700 mm- Overall System Height (H): Approx. 2,400 mm- Max. Workpiece Weight: 1,580 kg- Max. Sheet Thickness Steel: 25 mm- Max. Sheet Thickness Stainless Steel: 25 mm- Max. Sheet Thickness Aluminium: 15 mm- Wavelength: 10.6 µm- Laser Source Weight: 2,050 kg- Laser Source Dimensions (L x W x H): 2,850 mm x 1,150 mm x 2,100 mm- Table Exchange Time: 35 s- Cutting Lenses / Focal Lengths: 5", 7.5", 9"- Total Power Consumption (with extraction, chiller): 78 kW- Electrical Connection Machine: 3x400V / 3x480V, 50/60 Hz, Max. Power 73 kVA (125 AT)- Chiller Unit: ef cooling WKL560 (Refrigerant R407c, 18 kg, 3x400/480V, 40 kVA, Weight 1,050 kg, Dimensions 2,550 x 1,000 x 2,000 mm)- Laser Gas (Premix): He/N2/CO2, Normalmix consumption 12 Nl/h, Fastmix consumption 120 Nl/h- Cutting Gas: Oxygen (12 bar) / Nitrogen (25 bar)- Compressed Air: 9 bar dynamic, max. consumption 4.5 Nm³/h (machine) + 3 Nm³/h (dust collector) Fgedpfx Ahez Nh Sio Eji

Condition: new, Year of construction: 2025, Laser power: 30000 Watt Working range laser: 8000 x 2500 x 150 mm positioning speed X/Y/Z: 200 m / min simultanious: 280 m / min Max. workpiece weight: 15000 kg Max. steel: 50 mm Max. stainless steel: 40 mm Max. aluminium: 35 mm Max. copper: 20 mm Max. brass: 20 mm Length: 20200 mm Width: 4150 mm Height: 2620 mm Machine weight: 32500 kg Fgedsxra Rwjpfx Ah Eei

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, laser power: 6,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 550 mm, pipe length (max.): 12,000 mm, working length: 12,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, ACME Tube and Profile Laser System – 3-Chuck System with 45° Laser Head The ACME tube and profile laser system is a powerful CNC fiber laser cutting machine designed for high-precision processing of tubes and profiles across a wide range of sizes and applications. Technical Features and Specifications 3-Chuck System (all chucks traversable) For maximum flexibility, precise material handling, and virtually waste-free production (zero-tail cutting). Vertical linear guides Robust machine construction ensures high stability, accuracy, and vibration damping, even with large workpieces. Processing Diameters (optionally available): Ø 280 mm Ø 360 mm Ø 550 mm Laser Power Options: 3 kW 6 kW 12 kW Maximum Processing Length: Up to 12,000 mm (12 meters) for long stock and industrial applications Fedpfxsy Ixvyj Ah Eogi 45° Laser Cutting Head Enables miter cuts and complex cutting geometries without additional post-processing. Automation & Material Handling Semi-automatic loading and unloading system Efficient material infeed and removal to minimize setup times and manual intervention. Integrated small parts conveyor Clean separation and automatic discharge of finished parts and remnants. Quality & Safety Components from renowned international manufacturers High-quality laser sources and cutting heads from Max Photonics and Boci CE-compliant machine design in accordance with EU machinery directives Key Advantages at a Glance High precision for complex tube and profile geometries Efficient production through semi-automatic handling Flexible configuration for various material diameters and power options Reduced material waste through optimized chuck technology

Condition: ready for operation (used), Year of construction: 2008, laser power: 3,200 W, travel distance X-axis: 7,100 mm, number of axes: 4, This 4-axis TRUMPF TruLaser Tube 5000 was manufactured in 2008. It features a powerful CO₂ laser source with a laser power of 3.2 kW and a maximum X-axis travel of 7,100 mm. The machine includes an automatic bar loading and unloading system, enhancing efficiency. If you are looking to get high-quality tube cutting capabilities, consider the TRUMPF TruLaser Tube 5000 machine we have for sale. Contact us for further details. Fgodpfx Ahs Ad Ib Es Eei • Max. tube diameter: Ø159 mm • Current status: Under power • Inspection/test: Available for visit and testing • Maintenance: Maintenance carried out by TRUMPF Italia • Known technical issue: Weld seam detection/control not working Additional equipment • Automatic bar loading system • Automatic loading length: 2,000–6,500 mm • Maximum loadable bar length: 7,100 mm • Automatic unloading system • Unloading support length: 4,500 mm