Used band straightening machines for sale (30)

Condition: used, Roll guiding device WITELS-ALBERT Berlin, type ER 7 Guiding roller width: 30 mm Guiding roller diameter: 30 mm Belt cross-section: approx. 1.5 x 10 mm or 0.5 x 25 mm - Individual adjustment for the 3 upper guiding rollers via wing nut and lock nut - Quick-release mechanism via eccentric lever for the 4 lower guiding rollers Bledpfx Adezczvdorsi - 2 pre-forming guiding rollers, Ø 32 x 13 mm, mounted with a 90° offset - For guiding strip steel, last used for a belt cross-section of approx. 1.5 x 10 mm Space required L x W x H: 250 x 100 x 150 mm Weight: 5 kg Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, AXA ELECTRO-HYDRAULIC PRESS WITH MOVING CYLINDER. Capacity: 150 tons. Dual automatic speed with rapid traverse. Special electrical panel with fast/slow switch for one-hand operation. Moving cylinder with 816 mm traverse stroke. Internal daylight from shoulder to shoulder: 1500 mm. Ram stroke: 300 mm. No. 01 AXA PM150/15 ELECTRO-HYDRAULIC PRESS WITH MOVING PISTON – NEW CONDITION “CE” MARKED. -DUAL AUTOMATIC SPEED WITH RAPID TRAVERSE. -COMPLETE WITH A SPECIAL ELECTRICAL PANEL FOR FAST/SLOW SWITCH FOR ONE-HAND OPERATION. -TECHNICAL DATA SHEET ATTACHED. -Applied force: 150 tons -Cylinder stroke: 300 mm -Internal daylight: 1504 mm -Approach speed (rapid traverse): 1450 mm/minute -Working speed (slow): 105 mm/minute -Cylinder ram stroke: 300 mm -Cylinder ram diameter: 110 mm -Stem diameter: M30 -Tank capacity: 50 liters -Max. pressure: 350 bar -Voltage: 400 V, Frequency: 50-60 Hz -Power: 3 kW motor -Max. current consumption: 7.3 A -Weight: 1500 kg GALTECH distributors. • 2MP block. • No. 2 VIVOIL external gear unidirectional pumps. One for rapid approach and return (calibrated at 20 bar), and one with adjustable pressure controlled by a handwheel to set the required power. • Maximum pressure valve with mechanical lock to prevent overpressure. • Standard pressure gauge to display the applied force. • INTECH electrical panel certified according to current regulations and with independent CE marking. Bedpfxelruhde Adreli

Condition: excellent (used), 13 rolls, Ø 150 mm strip width: 600 - 2.000 mm strip thickness: 6 - 15 mm design: 4 hi cassette Bodpfxsv S Ad De Adreli

Year of construction: 1980, condition: used, strip width 120 - 300 mm strip thickness 1 - 5 mm Blodpfx Aolil Epedroi reference material (tensile strength) 800 N/mm²

Year of construction: 1992, condition: good (used), 21 rolls, Ø 80 mm strip width: 500 - 1.650 mm strip thickness: 1 - 5 mm Bsdpfx Aog Iirnedrsli

Condition: good (used), 5 rolls, Ø 100 mm Bedpfxegq D Acs Adrsli strip width: 50 - 530 mm strip thickness: max. 5 mm

Year of construction: 1990, condition: good (used), 8 rolls, Ø 53 mm strip width: 50 - 320 mm strip thickness: 0,4 - 3 mm Bljdpfxsgq D Are Adroi

Year of construction: 1978, condition: good (used), 17 rolls, Ø 66 mm Bodjbifp Ujpfx Adrsli strip width: max. 1.650 mm strip thickness: max. 3,5 mm

Year of construction: 1975, condition: good (used), 23 rolls, Ø 18 mm strip width: max. 60 mm strip thickness: 0,2 - 0,8 mm Blodpsbif Egefx Adrsi

Year of construction: 1984, condition: good (used), 21 rolls, Ø 60 mm strip width: max. 1.250 mm strip thickness: 0,6 - 4 mm Bsdpfxjrrl Uj Adroli

Year of construction: 1972, condition: good (used), 23 rolls, Ø 16 mm Bodpjbif Dyjfx Adrjli strip width: 170 mm strip thickness: 0,2 - 1,3 mm

Year of construction: 1980, condition: good (used), 5 (7) rolls, Ø 160 mm Bljdpfodnztwsx Adrji strip width: max. 1.750 mm strip thickness: 0,4 - 3 mm

Year of construction: 1987, condition: excellent (used), strip width 160 - 1.050 mm strip thickness 0,4 – 3 mm Bjdpfx Aelil Ausdroli strip cross section 2.500 mm² reference material (tensile strength) 420 N/mm²

Year of construction: 1975, condition: good (used), 13 rolls, Ø 152 mm Bjdpsg Iii Aefx Adrjli strip width: 500 - 2.000 mm strip thickness: max. 12 mm

Year of construction: 1975, condition: good (used), 11 rolls, Ø 130 mm Blodpodnztkofx Adrji strip width: max. 1.900 mm strip thickness: max. 10 mm

Year of construction: 1980, condition: good (used), 17 rolls, Ø 90 mm Bedpfx Adsdnzvdereli strip width: 50 - 200 (250) mm strip thickness: 2 - 10 mm

Year of construction: 1965, condition: good (used), 23 rolls, Ø 18 mm Blsdpfx Aobif Ekjdrei strip width: max. 50 mm strip thickness: 0,1 - 0,5 mm

Condition: good (used), 17 rolls, Ø 54 mm Bjdpfsbifryjx Adrjli strip width: max. 1.450 mm strip thickness: max. 2,5 mm

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Bjdpfjxw Rcuex Adrsli Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: excellent (used), Year of construction: 2006, number of straightening rollers: 19, straightening roller diameter: 55 mm, working width: 1,600 mm, strip width: max. 1.600 mm strip thickness: 0,4 - 3 mm design: 6 hi/cassette Bodpfxey Nxv Nj Adrsli No. of levelling rolls: 19 levelling roll Ø: 55 mm intermediate roll Ø: 30 mm

Condition: used, Year of construction: 1988, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm Blsdpfslil Ewex Adrsi strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² coil weight max. 4 t coil-dia max. 1.500 mm

Condition: new, Year of construction: 2025, Technical Data / Equipment Straightener: R65/360 • Strip width 30 - 360 mm Bledpfxjwhfxzs Adrsi • Strip thickness from-to 0.6 - 4.0 mm • Strip thickness throughput: max. 4.00 mm • Max. straightening cross-section: 800 mm2 at R02=350 Nmm2 or 150 x 4 mm • Straightening speed: 2 - 20 m/min • Number of straightening rollers: 7 • Straightening roller diameter: 65 mm • Number of draw rollers: 2 • Draw roller diameter: 65 mm • Motor power: 2.2 kW/3x400V RK machine body with a very stable and torsion-free welded construction RZ straightening and draw rollers, made of high-quality steel, surface-hardened and finely ground mounted in maintenance-free roller bearings AG drive, via spur gear motor with Double chain drive EM self-regulating drive, via frequency converter, with WM position measuring system, belt loop control for self-regulating drive, with ultrasonic sensor and sensor in the belt loop RZ straightening roller adjustment, individually manually adjustable and readable via dial gauges RO discharge roller cage, fixed with a radius for 3 mm material thickness PZ pneumatic tension roller adjustment, operated from the control panel BSF-ze belt side guide, manually adjustable centrically and eccentrically by 25 mm SS-2 interface to the press:

Condition: used, functionality: fully functional, Durmazlar HAP 3080 Plate Bending Machine. Strength: 80 T Folding length: 3000 mm Distance between uprights: 2520 mm CNC: Durma Throat: 350 mm Bledpjv R Ikysfx Adrei Vertical stroke: 135 mm Working speed: 8 mm/s Axis number: 3 Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2001, 25 rolls, Ø 32 mm Bedpjycub Hsfx Adroli strip width: max. 2.000 mm strip thickness: max. 1,5 mm speed: max. 40 m/min working direction: any

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, number of straightening rollers: 9, roller diameter: 36 mm, plate width: 400 mm, number of feed rollers: 2, Double decoiler with straightening machine. Strip thickness: 2.5 mm. Strip width: 400 mm. Coil diameter: up to 1700 mm. Weight per side: 2000 kg. Control system: S7 – Year of manufacture: 2017. Switch cabinet platform is not included in the price. Bodpfjxiyytox Adreli