I - beam section - flat steel 140 x 140 x 13 mm
I-beam section - upend 120 x 120 x 13 mm
L-beam 130 x 130 x 12 mm
round bar steel 85 mm
bending capacity - flat iron 125 25 mm
flat steel 65 x 65 mm
Pcn9v
including various rollers
angle iron / side length: 80 x 80 x 8double T-iron over x-axis: IPN 120 IPN 80U-iron over x-axis: UPN 140total power requirements: 4weight approx.: 1700messurements (LxWxH): 1.450 x 1.000 x 1.400
Bdf3amz8r8
tube diameter max. 3" Zoll
wall strength 3 mm
pressure 16 t
weight of the machine ca. 45 Kg
Puo8iy
dimensions 0,8 x 0,6 x m
0,65 x 0,60 x 0,20 m
Bending machine ZOPF
ZB 140/3 H 2
- compl. with standard roller set,
- digital readout for left and right axis
- hydraulic side guides
- three smooth driven rollers
- planetary movement of bending rolls
- working with both vertical and horizontal shafts
- built according to the CE rules
- bending capacity steel up to 110x25 mm
-shaft diameter 110 mm
-Rolls diameter 350 mm
-working speed 5 m/min
Bdnmytf2vz
-installed power 7,5 kw
-weight 2950 kg
-module max Wcm3 157
-400 Volt 50 Hz. 3 ph.
Flat bar 250 x 40 mm Flat bar on edge 160 x 20 mm Square 80 x 80 mm Round (solid) 90 mm dia. Angle bar 120 x 120 x 13 mm UPN 300 (internal) Tube 140 x 3,5 mm
Control: PQ 10
Hydraulic drive on 3 rolls Hydraulic adjustment of support rolls Horizontal/vertical
Bl2xe8eyhv
Equipped with: 2 set of tube bending rolls 1 set of universal rolls Special equipment for bending HE profiles Machine appears as new, and has only been running 20 hours.
bending angle max.: °
work height max.: 1100 mm
voltage: 380 / 50 V
total power requirement: ca. 15,1 kW
weight of the machine ca.: 4,5 t
dimensions electric cabinet LxWxH: 1,2 x 0,64 x 1,4 m
dimension machine xH: 1,5 x 1,6 x 1,3 m
Osfyp
Machine is currently in technical department!
The machine works on two gear stages: 0-4 rpm and 0-6.5 rpm.
- 1x bending roller and 2x drive rollers
- Bending roller vertical adjustment 140mm, profile 70 x 25mm
- 2x support rollers ( right/left ), 45 ° positio...
I - beam section - flat steel 300 x 50 / 1000 mm
I-beam section - upend 150 x 40 / 1500 mm
L-beam 160 x 160 x 19 / 2500 mm
roll diameter bis 500 mm
double T-iron on the x-axis 1360/1800 mm
U-iron on the x-axis U 400 mm
min. dia. 2300 mm
65 x 10 mm
min. dia. 2000 mm
angular steel - leg inwards 140 x 15 mm
min. dia. 1500 mm
93 x 93 x / 1000 mm
roll speed 4,5 x 9 m/min.
Bnblcnb8hl
0 400 mm
shaft diameter 120/230 mm
total power requirement 22 kW
weight of the machine ca. 13 t
range L-W-H 3 x 2,3...
angle steel/side length 130 x 12 / Ø 1800 mm
double T-iron on the x-axis 300 mm
U-iron on the x-axis 300 mm
flat iron St. 52 - upend 140 x 30 mm
diameter 1400 mm
flat iron St. 52 - flat 220 X 50 mm
diameter 1000 mm
tube diameter 139,7 x 7,1 mm
diameter 1500 mm
double T-iron on the x-axis HEA 300 mm
diameter 1400 mm
bending speed 0 - 5 m/min
section modulus 100 qmm
roll diameter max ca. 540 mm
total power requirement 22 kW
weight of the machine ca. 8,5 t
Cocztaia
dimensions of the machine ca. 2,5...
Ringbending machine
Podyiaw9
Akyapak APK 101
technical information See photo
Profile bending roll hydraulic - HEB SECTION ROLL HARD WAY
shaft size 290 mm
Rolls size 670 mm
Planetary configuration with pre-bending - 3 rolls power driven hydraulic with axial gear unit independent
Hydraulic power unit self enclosed 2 x 30 Kw electric motors
4 x hydraulic power pumps
Adjustable rolls to seat and bend the different shape of profiles.
Lateral arms correctors left/right side control hydraulic in 3 direction, +add-on double rollers for angle bending leg...
Shaft diameter: 110- 100roll diameter: 315
3 driven rolls (hydromotor and planetary gear)
strong welded steel construction
lower rolls hydr. adjustable
Bxcub9v0
digital read-out for lower rolls positions
plane rolls
lateral rolls (forward-backward hydraulic, rest manual)
horizontal and vertical operation
double foot pedal for- and backward drive
machine and equipment according to the CE regulations
Technical specifications:
Performances:
flat steel vertical position:100x25 mm / 1.500 mm; 40x1...
Technical data:
2 rollers hydraulically adjustable
3 rollers driven
shaft diameter: 130 mm
roller diameter: 410 mm
lateral hydr. controlled arm correctors left and right
machine can work vertical or horizontal
bending capacity flat steel: 120 x 30 mm
bending capacity angle steel: 130 x 130 x 15 mm
motor power: 18 kW
mobile control panel with digital display
dimensions (length x width x height): approx. 2150 x 2100 x 2100 mm
weight: approx. 7 to
Pgg79
The seller is not liable for writing or data ...
I-beam section - flat steel 220 bei Dm 1200 mm
I-beam section - upend - mm
angular steel - leg outwards 110x110x14 bei Dm 1000 mm
angular steel - leg inwards 80x80x10 bei Dm 1000 mm
flat steel flat 100 x 20 bei Dm 1000 mm
T-steel / side out 120x120x13 bei Dm 1200 mm
U-iron on the x-axis 22 bei Dm 1200 mm
pipes 102 x 6 bei Dm 900 mm
round material 75 bei Dm 700 mm
square material 60 x 60 bei Dm 600 mm
bending speed 3,5 m/min
No. - Rolls 3
Drive 7,5 kW
shaft diameter 125/135 mm
weight 6,4 t
dimen...
Hydraulic side roll support
Optical readout position side rolls
Roll set for UPN 140
Roll set for T 120
Roll set for L 120
Roll set for Square 70 x 70
Horizontal and vertical:H + V
3cnkxlg
Shaft Ø: 120mm
Number of rolls: 3
Horizontal: Yes
Vertical: Yes
Resistance moment: 60CM³
Capacity flat: 130 x 20 x R 1200 mm
Capacity Tube: 114,3 x 7,1 x R 1000 Ø x mm
Capacity bar: 70 x 70 x R 600 mm
Capacity HEA-Profile: 120 x 58 x R 3200 mm
Working speed: 3500 + 7000...
Profile bending machine make SAF type CS 60 H
Machine # 050E - 906 Year of construction 2000
Technical data:
Bending capacity square steel 35 x 35 mm
Bending capacity round steel 40 mm
shaft diameter 50 mm
Shaft speed 8 rpm.
Bod8n9akdb
Roll diameter 167 mm
Roller drive 3 kW
Hydraulic drive. infeed 1,1 kW
Total drive power 5,5 kW
Weight approx. 587 kg
Machine dimensions L x W x H 780 x 1340 x 1450 mm
with
- hydraulic feed
- 3 driven rollers
- lower roller axle distance adjustable in 3 positions
-...
4 roll section bending machine matriculation year 2020
Bv8skxpdjl
4ROLL DUAL PREPINCH
-shafts Ø 190 mm
-Rollers size 570 mm
Hydraulic power unit self enclosed 30 Hp electric power
Voltage 3 ph Vac 400 / 50
Weight 14 Ton
---
Capacity max.
Angle 180 mm
Bar on edge 170 mm
full iron square 105 mm
T section 160 mm
Channel 260 mm
HEB 260 mm
Tube 219 mm
Linear guideways technology with double pre-pinch
4 rolls driven hydraulic with axial gear unit each shaft.
Set of rollers fo...
Shaft diameter: 140- 120roll diameter: 380
3 driven rolls (hydromotor and planetary gear)
strong welded steel construction
lower rolls hydr. adjustable
digital read-out for lower rolls positions
plane rolls
lateral rolls (forward-backward hydraulic, rest manual)
horizontal and vertical operation
double foot pedal for- and backward drive
machine and equipment according to the CE regulations
Iqgz7bz
Technical specifications:
Performances:
flat steel vertical position:120x25 mm / 1.300 mm; 50x1...
Technical data:
2 rollers hydraulically adjustable
3 rollers driven
Bending force of the machine: 180 tons
Roll diameter: 610 mm
Roll diameter side rolls: 520 mm
Power main motor: 50 KW
dimensions (length x width x height): 2500 x 2500 x 3500 mm
B87aysis
Weight: approx. 15,5 to
The seller is not liable for writing or data transmission errors. The machine is in optics, technology and wear according to the age; used machines are sold without any warranty.
Profile steel bending machine
Manufacturer: Herkules
Type: BO 232 K/1
Year of manufacture: 1994
suitable for the following profiles:
Square steel
70x70 mm minimum diameter 800 mm
75x75 mm minimum diameter 800 mm
80x80 mm minimum diameter 900 mm
85x85 mm minimum diameter 1500 mm
Fleldpxh
90x90 mm minimum diameter 2500 mm
Flat steel bent on edge
120x40 mm minimum diameter 1.000 mm
120x50 mm minimum diameter 1.500 mm
120x60 mm minimum diameter 4.000 mm
150x30 mm minimum diameter 2.000 mm
150x40 mm ...
pyramidal straightening machine with 450 rol diameter
Brpqknrcid
Flange ext. ø 309mm, thickness 18mm (material iron)
Flange ext. ø 360mm, thickness 35mm (material iron)
Flange ext. ø 330mm, thickness 35mm (material iron)
Flange ext. ø 170mm (material teflon)
Flange ext. ø 309mm, thickness 18mm (material iron)
Flange ext. ø 360mm, thickness 35mm (material iron)
Flange ext. ø 330mm, thickness 35mm (material iron)
Flange ext. ø 170mm (material teflon)
Horizontal and vertical:Horizontal
Shaft Ø...
bending machine model HB 80
- manufacturer KB
- two roller driven
- digital readout with memory
- standard roller set knurled
- horizontal and vertikal
- main motor 4 kw
- hydraulic motor 4 kw
- shaft diameter 80 mm
- workingspeed 4,5 rpm
- bending capacity round tube 100x3,0 mm mild steel
- flat iron 100x15 mm
- solid 60 mm
Bd8zhzfzna
- weight 1650 kg
- 400 volt 50 Hz 3 phase
HS-Code: 8462 2998
Profile bending roll Parmigiani - Model Planet 40 year 2002 - Output shafts size 175 mm
Planetary 3 configuration with pre-bending - 3 rolls driven hydraulic with axial gear unit each
Hydraulic power unit self enclosed. Machine reversible can work with shafts vertical/horizontal
Universal set of rollers 9 pieces - Size of the rollers 470 mm
Special set of rolls for pipes 2”-3”-4”-5”-6”-8” x 3 pieces each size.
Lateral arms correctors left/right side control hydra...
Shaft diameter: 80roll diameter: 245
3 motor driven rolls
strong welded steel construction
lower rolls hydr. adjustable
digital read-out for lower rolls positions on seperate control panel
lateral rolls adjustable in 3 axes
horizontal and vertical operation
for- and backward drive
machine and equipment according to the CE regulations
Njtbx
Technical specifications:
shaft diameter:80 mmroll diameter:245 mmdriven roll:3motor power:5 kWspeed:6 m/ding capacities (section / min. diameter):
flat s...
Technical data:
2 rollers hydraulically adjustable
3 rollers driven
shaft diameter: 150 mm
roller diameter: 475 mm
lateral hydr. controlled arm correctors on the left and right side
machine can work vertically or horizontally
engine power: 18,5 kW
mobile control panel with digital display
dimensions (length x width x height): approx. 2250 x 2700 x 2300 mm
Btwherfwq2
weight: approx. 12,5 to
The seller is not liable for writing or data transmission errors. The machine is in optics, technology and ...
Rollers diameter: Ø110 - Ø100
Engine power: 11 Kw
Rotating speed: 9m/sec
Height: 1650
Width: 1340
Length: 1750
Weight: 3360
Standard accessories:
Tkoldx7f
- CE
- mechanical lateral supports (Z-U-C axis)
- hydraulic up and down movement of the top roller
- top roller with digital display
- 1 set of hardened and ground rollers of special steel
- hardened lateral supports
- horizontal working possible
- vertical working possible
- all rollers driven by motor & gearbox
- electrical and hydraulic pro...
Horizontal and vertical:Horizontal
Shaft Ø: 105mm
Number of rolls: 3
Stroke X-Axis: 300mm
Capacity Tube: 60 x R 1000 Ø x mm
Capacity T-Profile: 80 x 80 x 8 x R 1000 mm
Capacity HEA-Profile: 140 x R 2500 mm
Working speed: 1000 - 24000 mm/min.
Length: 1.500 mm
Width: 1.200 mm
Height: 1.400 mm
D8hplfp
Weight: 1.700 kg
set universal rolls
set pipe rolls
BC 25 control system
Please Note: The information on this page has been obtained to the best of ou...
For sale is the pictured profile bending machine incl. accessories. The machine runs perfectly and can be inspected under power.
The shaft diameter is 80 mm.
Btr8xmps2e
Section bending roll shafts Ø 140 mm
working shafts vertical and horizontal
-3 rolls driven with axial gear unit and hydraulic motor each shaft independent
Rotation hydraulic synchronized -overload hydraulic safety protection-
-Set of rolls D400mm interchangeable 9 pieces to seat and bend the various shape of profiles -
- side straighteners hydraulic operated in 3 directions,
-double heads rollers for angle bending leg-in/ leg-out.
-Centralized control panel with -CNC controller winme progra...
MG AR 360 hydraulic bending machine.
Used, 2011.
Number of rollers 3
Shaft diameter 200 mm
Capacity :
Traction bending hard side HEB 500 -INP 600
Fe9b0oj
angle200mm - T300mm - flat iron bar 300X80mm - square iron bar 200mm
pipe bending up to 508 mm -20"-UNP 500 mm
Mobile control console on wheels with electric joysticks for manual operation and digital position reading
Length x width x height 4700 × 4900 × 2900 mm
Weight 60000 kg
Technical data:
2 rollers hydr. adjustable
3 driven rollers
shaft length: 400 mm
roller diameter: 490 mm
Btpiuylr8j
motor power: 22 kW
mobile control panel with digital display
working height: approx. 130 mm
dimensions (length x width x height): approx. 2600 x 2950 x 2050 mm
weight: approx. 8,5 to
The seller is not liable for writing or data transmission errors. The machine is in optics, technique and wear according to the age; used machines are sold without any warranty.
Tube and profile bending machines
Shafts Ø 120 mm
Rollers Ø 390 mm
Bending speed 4 m/min
optimal adaptation to a wide range of profiles due to a modular standard roller system
3-fold hydraulic drive
Dxzf7u
hardened rolls and shafts
adjustable overload protection
hydraulic feed of the lower rolls with digital display
with hydraulically adjustable straightening rollers
horizontal or vertical processing possible
hydraulic components from renowned manufacturers
working range
shafts Ø 120 mm
rollers ...
Shaft Ø: 200mm
Bslteuwvib
Number of rolls: 3
Stroke X-Axis: 700mm
Capacity flat: 120 x 50 x 2000 mm
Capacity Tube: 133 x 6,0 mm mm
Capacity bar: 80 x 80 x 2000 mm
Capacity T-Profile: 120 x R 1500 mm
Capacity HEA-Profile:320 x R 1600 mm
Working speed: 4500 - 9000 mm
Adjustment siderolls:550
Length: 3.000 mm
Width: 2.500 mm
Height: 2.500 mm
Weight: 5.100 kg
Please Note: The information on this page has been obtained to the best of our ability and bel...
Profile steel bending machine make HERKULES type BO 230 K / 2
Machine # 83067 Year of construction 1983
technical data:
L-steel - leg to the outside max. 90 x 9 mm
smallest diameter approx. 1200 mm
minimum profile 40 x 5 mm
smallest diameter approx. 350 mm
L-steel - leg inwards max. 75 x 10 mm
smallest diameter approx. 1200 mm
minimum profile 35 x 5 mm
smallest diameter approx. 700 mm
T-steel - web to the outside max. T 90
smallest diameter approx. 1200 mm
T-steel web inwards max. T 80
smallest ...
-Section bending roll shafts output 200 MM
SERTOM ITALY
weight of the machine 20 Ton.
Dimension 2,2 x 2,7 mtr x H 3,1 mtr
Configuration
-3 rolls power hydraulic driven - size of the rolls 570 mm
-set of rolls interchangeable -adjustable
-hydraulic traction tool H-BEAM HARD WAY ROLLING
IPE- HARDWAY ROLLING
-Lateral correctors left/right side hydraulic motorized
-Control panel console movable on wheels with electric joysticks manual bending with digital position readout.
-...
Shaft diameters 80-100-80mm
Hydraulicly adjustable
Digital readout
Incl: set of steel rollers ø 60mm
E9g8rhhj0
Plastic rollers± ø30-46-65-76mm
Several disks and spacers
Calendering rollers length :
mm 1500.
Diameter of rollers :
mm 100.
Calendering thickness :
Bnbcejzfjl
mm 3.
Tube and profile bending machines
Shafts Ø 80 mm
Rollers Ø 245 mm
Bending speed 4,2 m/min
optimal adaptation to a wide range of profiles due to a modular standard roll system
3 motor driven rolls
hardened rolls and shafts
adjustable overload protection
Bs9qfoagbr
hydraulic feed of the lower rolls with digital display
hydraulically adjustable straightening rolls available as an option
horizontal or vertical processing possible
hydraulic components from renowned manufacturers
working range
shafts ...
- Make : PBT Swiss
- Type : 25
- Age : 2014
- Capacity X axis : 27 t
- Number driven roll : 3 x
- Working Speed : 1 – 24 M/min.
- Torq moment : 1.600 Nm
Brr9s3ym8c
- Shaft Ø : 105 mm
- Stroke : 265 mm
- Max. roll height : 300 mm
- Hydraulic power X axis: 3,0 kW
- Power all 3 driven rolls: 1,1 kW
- Dimensions
- Length : 1.500
- Width : 1.200
- Height : 1.400
- Weight : 1.200 Kg
- Ø 60 x Ø 1.000
- T 80 (80 / 8) x Ø 1.000
- iPE 120 x Ø 1.000
- HEB 140 x...
Profile steel bending machine make HERKULES type BO 230 K / 2
Machine # 80258 Year of construction 1981
Technical data:
L-Steel
leg to the outside max. 90 x 9 mm
smallest diameter approx. 1200 mm
Minimum profile 40 x 5 mm
smallest diameter approx. 350 mm
L-steel
leg to the inside max. 75 x 10 mm
smallest diameter approx. 1200 mm
Minimum profile 35 x 5 mm
smallest diameter approx. 700 mm
T-steel
Bar to the outside max. T 90
smallest diameter approx. 1200 mm
T-steel
web inwards max. T 80
smallest ...
Profile bending machine
Make Schäfer
Bhbm0wu7nn
Type SPVS 25-100
with digital display
with one universal standard roller set
Shaft diameter 120 mm
hydraulic roller feeder
hydraulic roll feed
with different rollers for bending tubes
operable from the control panel
Machine can be set up for either horizontal or vertical bending.
Bending capacity : maximum resistance moment of the profiles to be bent
25 cm/3
11 kw
380 volts
Weight 5,9 to.
4-roller hydraulic profile bending machine
Hezinger-BendingLine, model HR4P, model HR4P090
Shaft diameter 90 mm
Roll diameter 260 mm
Motor output 5.5 kW
Maximum rolling speed 6 RPM
Machines dimensions 1,700 x 1.450 x 1,200 mm
Machines weight 2,800 kg
Bending performance HR4P080:
Flat steel upright: 30 x 10 mm with Ø 300 mm
80 x 20 mm to Ø 800 mm
100 x 10 mm to Ø 2000 mm
Flat steel flat: 60 x 5 mm with Ø 300 mm
125 x 25 mm for Ø 600 mm
Rectangle solid material: 15 x 15 mm to Ø 380 mm
45 x 45 mm a...
ELEKTRISCHE PROFILBIEGEMASCHINE F 15
- 01-08-002
Lieferzeit: sofort
Nummer: 01-08-002
Hersteller: Profilbiegemaschine
Yr9aao
Typ: F 15
MASCHINENDATEN
Baujahr: ca. 1975
L x B x H: ca. 800 x 600 x 1000 mm
Gewicht: ca. 150 kg
Guter Allgemeinzustand
Maschine hat Bruch im Maschinenkörper, dieses wurde fachmännisch repariert, Maschine voll funktionsfähig
TECHNISCHE DATEN
Steuerung: konventionell
Max. Biegeleistung (Stahl): ca. 150 x 10 mm
Max. Biegeleistung (Edelstahl): ca. 150 x 5 mm
Anzahl d...
Technical data:
2 rollers hydr. adjustable
2 support rollers hydr. adjustable
Biq7eayn0v
3 rollers driven
shank diameter: 100 mm
Roll diameter: 300 mm
Engine power: 7,5 kW
mobile control panel
Dimensions (length x width x height): 1500 x 1800 x 1400 mm
Weight: approx. 3,5 to
The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear and tear according to its age; used machines are sold without any warranty.
Specifications
US Standard Metric
Horizontal and vertical
H + V
Shaft Ø
120 mm
Number of rolls
3
Resistance moment
56 CM³
Capacity flat
125 x 20 x 1300 mm
Capacity Tube
115 x 1200 mm
Capacity bar
65 x 65 x 1000 mm
Capacity T-Profile
120 x 120 x 13 x 1200 mm
Capacity HEA-Profile
UNP 240 x 1800 mm
Working speed
6,6 / 6,5 M/Min mm
Dimensions
Cfzq8asg
Length
1.830 mm
Width
1.540 mm
Height
1.600 mm
Downloads
Specifications
Horizontal and vertical: H + V
Shaft Ø: 120mm
Number of rolls: 3
Resista...
section modulus: 40-70 W/cm3
roll shafts diameter: 105 mm
Roller outer diameter: 310 mm
Electrical power: 15 HP
rolling speed: 7 m/min
E8viiovmo
Price on request.
Machine is delivered with commissioning and training in German.
We are DAVI trade and service partner for North, West and East Germany.
Technical data:
-mot 2. driven roller - MOT. Delivery of the Middle roller
-Shaft diameter 75 mm
-Shaft length approx. 200 mm
-Roller height adjustment screw without removing
-Work speed 5 + 10 m / min
-Bending performance - l and T - iron exterior at R 1200 mm 90 x 9 mm
-L - iron inside the R 1200 mm 75 x 10 mm
-I 1000 mm I flat R 160 mm
-U - iron legs outward R 1000 mm U 140 mm
-U - iron thighs inward R 1200 mm U 140 mm
-Flat iron flat R 450 mm 160 x 25 mm
Xd222ruhb
-Flat iron upright R 700 8...
4-roller hydraulic profile bending machine
Hezinger-BendingLine, model HR4P, model HR4P090
Shaft diameter 90 mm
Roll diameter 260 mm
Motor output 5.5 kW
Maximum rolling speed 6 RPM
Machines dimensions 1,700 x 1.450 x 1,200 mm
Machines weight 2,800 kg
Bending performance HR4P080:
Ikiaghf
Flat steel upright: 30 x 10 mm with Ø 300 mm
80 x 20 mm to Ø 800 mm
100 x 10 mm to Ø 2000 mm
Flat steel flat: 60 x 5 mm with Ø 300 mm
125 x 25 mm for Ø 600 mm
Rectangle solid material: 15 x 15 mm to Ø 380 mm
45 x...
Profile Bending Machine
ZOPF
- Model ZB 110/3 H
TECHNICAL SPECIFICATIONS:
Fe7cz2b
- three driven shafts, smooth surface
- hydraulic adjusting of the center roller
- working position horizontal and vertical
- digital readout with memory
- shafts are supported by conical bearings
- slide bars on the slide-support are exchangeable
- shaft diameter: 80 mm
- roller diameter: 260 mm
- shaft rpm: 7 U/min
- voltage: 400V 50Hz 3Ph
- drivingmotor: 2,2 kW
- motor for hydraulic: 1,5 kW
- hydraulic pressure...
Technical data:
2 rollers hydraulically adjustable
3 rollers driven
Bngozvaw3x
Bending moment: 48 cm/3
Roll diameter: 360 mm
Power main engine: 7,5 KW
Machine can work horizontally or vertically
Dimensions (length x width x height): 2.0 x 1.3 x 1.9 m
Weight: approx. 5,5 to
Accessories:
various roles
The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear and tear according to its age; used machines are sold without any warranty.
OSTAS PROFILE ROLLER
TYPE OPK-85
- Axle diameter 80 mm
- Lower two rollers are moved hydraulically
- Three rollers driven
- 2 Speeds
- 2 Digital readouts
- Brake motor
- Horizontal/vertical use
- Mobile control panel
- Emergency stop
- Documentations
Brnzgnrode
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
Used Section benders shaft diameter over 71mm
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
10 valuable tricks for buying used machines online
Photo gallery: the 10 strongest forklift trucks in the world
Olympic Games: Machineseeker sponsors Team Germany
Sell now on Machineseeker! Over 220,000 inquiries per month
Photo gallery: The World's 10 biggest excavators
