Maximum sheet thickness: 6 mm steel
Adjustable angle: 30 ° - 135 °
mass: about 1,300 kg
Susbzs
Motorized angle adjustment from 30-135 ° Stroke release via foot switch Single stroke or double stroke adjustable via selector switch
plate thickness 6 mm
thickness at "Niro-steel" 4 mm
blade length 250 x 250 mm
table: 1000 x 700 mm
stroke of worktool slide 48 Hub/min
cutting angle 30 -130 °
total power requirement 4,4 kW
weight of the machine ca. 1,25 t
Btoiirdinu
Electric 380 Volt
Foot switch
Squaring arm 2 x
Hydraulic notching machine with adjustable angle, additional hold-down at the
front and NEW upper blades.
Machine dealer with own stock of 2500 m².
plate thickness 6,0 mm ST
angle adjustable from - to 30 - 140 Grad
no. of strokes 50 Hub/min
Bsbib7orzd
table: 950 x 1030 mm
blade length 220 x 220 mm
total power requirement 4,0 kW
weight 1.250 kg
range L-W-H 1300 x 950 x 1450 mm
** from a university of applied sciences - good condition (!!)
Furnishing:
- Multi machine with 2 work stations
* 1 x notching, 1 x punching / rectangular notching station
- Angle adjustment 30 - 140 degrees
- Handwheels for angle adjustment
- large work table
- 2x...
Euromag corner notcher
Model : Multi 220/6
Capacity : 220 x 6 mm.
O37vz
With ajustable angel
We sell an Auklinker with adjustable angle in serviceable condition.
Table dimension: 1000x800 mm
blade length: 200 mm
Cutting capacity: 6mm in steel /4mm in stainless steel
cutting head stepless: 30-135 degrees
motor: 4 kW
strokes/min: 60
weight: 1100 kg
New upper knives for 30° cuts
Fvzghxnzi
Documentation available
messurements (LxWxH): 1,10 x 1,15 x 1.40weight approx.: 1,150total power requirements: 4sheet thickness: 6 mm
Eqb78wd
Maximum sheet thickness of steel: 6 mm
Maximum sheet thickness in stainless steel: 4 mm
Blade length: 200 mm
Adjustable angle: 30-135 degrees
Table: 800x1000 mm
Fae2gfswe
Power: 5.5 kW
Dimensions: 1000x1600x1560 mm
Weight: 1230
plate thickness 6 mm
Cutting thickness max. At (60 kg / mm²) 4,5 mm
work table: 950 x 890 mm
cutting length 225 mm
hole punching capacity max. 30 x 3,5 mm
special punch capacity max. 40 x 2 mm
throat at punch max. 285 mm
strokes/minute 35
total power requirement 3 kW
weight of the machine ca. 960 kg
dimensions of the machine ca. 0,95 x 1 x 1,15 m
Foot pedal
B79ymiya
Sheet waste slide
Position angles ( 2 pieces )
with engraved protractor and stop bars
Brass scales in the table
1 set ...
plate thickness 6,0 mm ST
plate thickness 4,0 mm VA
table-size 1200 x 900 mm
blade length 250 x 250 mm
strokes per minute 45 min
adjustable Winkel 30° - 135° mm
work height max. 1050 mm
engine output 4,0 kW
Bp0dxl90ha
weight of the machine ca. 1.300 kg
range L-W-H 1200 x 1350 x 1600 mm
Technical data:
- Cutting length up to 200 mm
- Cutting thickness - steel with 400N/mm² strength 6 mm
- stainless steel with 600 N/mm² strength 4 mm
- infinitely variable cutting angle adjustment 30 - 120 °
- pneumatically clamped
- automatic cutting gap adjustment
- locking stops left + right 300 mm each
- table support surface 1000 x 800 mm
- with T-slots and depth stops
- table height approx. 900 mm
- depth stops
Brwredo0cn
- drive 400 V / 4 kW
- E - foot switch
- space requirement appr...
Technical data:
Blade length: 220 mm
Cutting capacity for steel St40: 6,0 mm
Cutting capacity for stainless steel: 4,0 mm
cutting capacity for aluminium: 7,0 mm
variable adjustable angle: 30° - 140°
working height: 940 mm
CE-mark
foot switch
Brorpl0zat
dimensions (length x width x height): approx.960 x 1050 x 1350 mm
Weight: approx. 1 ton
The seller is not liable for writing or data transmission errors. The machine is in optics, technology and wear according to the age; used machines are sold wi...
EUROMAC notching machine various models like:
200-6; 220-6; 220-6 Multi
further info see documents PDF
Bpxqxc9z3p
please only inquiries from Germany PLZ-area: 2,3,4,5!
Baykal notcher 200x6
With adjustable angle
Uzmnrqlv
2 T - slots in the table 30° - 140
2 side stops with scale and groove for attachable backgauge
Adjustable cutting depth
Knife for stainless steel built-in
Bo7lyk28ud
Foot control
Selector switch for use in simple step or step-by-step
2 mechanical hold-down devices
Cutting gap adjustment automatic
Knife length (mm) 220
Cutting capacity R = 42Kg/mm2 6,5
Cutting capacity: R = 60Kg/mm2 5
Strokes/minute: at max. length 50
Strokes/minute: with 50 mm cut 80
Working height (mm) 900
Oil tank capacity 35
...
plate thickness 6,0 mm ST
plate thickness 4,0 mm VA
table-size 1200 x 780 mm
blade length 205 x 205 mm
strokes per minute 60 min
engine output 4,0 kW
weight of the machine ca. 1.200 kg
dimensions of the machine ca. 1000 x 1200 mm
Furnishing:
- hydraulic notching machine
Vbyutxxz
- with adjustable angle, hand wheels for adjustment
- digital display
- 2x stop rulers
- foot switch
Angle adjustment: 30° - 135
blade length: 200 mm
cutting capacity max. steel: 6 mm
cutting capacity max. stainless steel: 4 mm
table dimensions: 1000 x 800 mm
Equipment:
- Foot switch
Gwvwjo
- two new work lights
- Depth stops with scale and angle adjustment
Angle adjustable hydraulic notching machine Imac
Type: AM-VA- 200/6
adjustable knife cutting head 30-140 degrees
200 mm knife length
6 mm cutting capacity / steel
4 mm cutting capacity / VA steel
Hydraulic knife clamping
4 T-slots
5-fold readability of the measuring tapes
2 sheet metal hold-down devices
Ready for operation; incl. hydraulic oil filling
Technical data :
Oiofh
Engine power : 3 kW
Dimensions: Table (W x D) 1000 x 935 mm
Dimensions: 1000x1300x1100 mm
Weight: 970 Kg
Ausklinkmaschine, wenig gebraucht
Notching machine , lessly used
Typ/type: VA 200/ 4
Baujahr / yom: 1995
Hersteller / make: KEMPFLE
Arbeitstischgröße/ table size: 1000 x 800 mm
Leistung:/ capacity: 4 mm / bei Stahl / steel 400 Nm/mm^2
3 mm bei Edelstahl / stainless steel 600Nm/mm^2
Messerlänge/ length of cutter blades: 205 mm
Anzahl Hüber/ strokes: 60 per minute
Schneidkopf/ cutter head: 30...135 ° ( stufenlos )
I8b2ac92g
Gewicht / weight: 1,15 ...
A notching machine is offered:
Motor power 4 KW, punching force approx: 25t, max. sheet thickness: 6 mm, punch diameter approx. 90 mm,
Nspqr
Station 1:
variable angle from 30 to 120 degree infiniteley adjustable
Befrssgxg7
200 x 200 x 6 mm mild steelSt 45
200 x 200 x 4 mm stainless steel
Station 2:
fixed angle 90°
150 x 150 x 4 mm mild steelSt 45
150 x 150 x 3 mm stainless steel
Self locking stops 500 mm
large machine table with additional T-slots and scales
The notching machine will be technical checked and broken parts changed. We grant a 6 months used machinery warranty on all notching machines which have been technical checked...
Notching machine with variable angle
UN 2006
- angle: 30 - 140°
- Engine: 4 kW
- Power (empty): 66 dBA
- Power (charged): 77 dBA
- cutting capacity: 6-4mm
- height: 1300mm
- width: 1050mm
- Length: 900
- Pressure: 210 3045 PSl bar
- weight: 950kg
Your advantages with Haak and Kraft
- Personal contact person at Haak und Kraft
- Friendly information by e-mail and telephone
Bjlopeydut
- Uncomplicated purchase procedure
- Trade-in of used machines possible
- Mediation of individual financing ...
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
How to receive 100% of our e-mails
Photo gallery: the 10 strongest forklift trucks in the world
Sell now on Machineseeker! Over 220,000 inquiries per month
10 valuable tricks for buying used machines online
Morlock Motors official partner of Machineseeker and Truckscout24
