Used Press brakes with 150-199t bending force for sale (179)

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, pressing force: 152 t, working length: 3,100 mm, Valid until 10/2025 TECHNICAL DETAILS Press force: max. 1,500 kN Working length: max. 3,100 mm Diameter: 690 mm Upper beam stroke: max. 300 mm Speeds Upper beam drop speed: 100 mm/s Upper beam pressing speed: 10 mm/s Upper beam return speed: 100 mm/s Backgauge Backgauge range: 600 mm Number of backgauge axes: 6 Compressed air Compressed air consumption for sheet thickness measurement: 0.0002 m³/min at 6 bar MACHINE DETAILS Length: 4,360 mm Width: 2,120 mm Height: 2,885 mm Weight: 12,800 kg Mains voltage: 3 x 400V/50/60Hz/N/PE Slow-blow fuse: 63 A Ceb Ha D Sswffkxo Iegt Power consumption: 22 kW EQUIPMENT - Hydraulic tool clamping (top/bottom) - CNC-controlled bending aid - Safety light curtain - Sheet thickness measurement

Condition: used, Year of construction: 1986, Bending length 3600 mm Cjb Ha Dov Hy U Nj S Iogt Max. pressure 175 ton Length of stroke 400 mm Working radius in frames 300 mm Controlled on 4 axis (Y1-Y2-X-R) Controlled crowning Control: Cybelec ModEva 10 S Equipped with: Pneumatic clamping of upper & lower tools Various tools (7-12-16-24-32 mm) lower tools & 4 pcs. upper tools

Condition: used, Year of construction: 2006, pressure 175 t chamfer lenght 3550 mm distance between columns 3050 mm throat 405 mm stroke 400 mm ram stroke speed 140 mm/sec working feed 10 mm/sec return speed 180 mm/sec work height max. 900 mm oil volume 350 l Control CYBELEC ModEva 10S total power requirement 25,5 kW weight of the machine ca. 13800 kg dimensions 5980 x 3590 x 3220 mm Furnishing: - DELEM CNC control DA65 - controlled axes: Y1 + Y2 + X + R - Electric crowning device WILA, controlled via CNC - Electric back stop, travel range 600 mm - hydr. Upper tool holder WILA - hydr. WILA lower tool holder - front laser protection device FIESSLER - 5x manually adjustable stop fingers, foldable - 2x front support arms “sliding system” Cgsb Ha Dowgn Dqs S Ist - side + back protection device - Hand and foot controls - Operation manual ?

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. Cjb Ha Dsvxipgs S Ijgt R upward and downward axis of the register. Z1 and Z2 axes of the movement to the right and left of the stops. X1 or relative X which is the axis of the movement forward and backward of a single stop. 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis.

Condition: used, Year of construction: 2000, pressure 170 t Ceb Haswglllo D S Isgt chamfer lenght 4100 mm distance between columns 3750 mm Stroke beam 215 mm 380 mm 350 mm Quick speed,inspeed 120 mm/sec bendingspeed 0-10 mm/sec opening speed 120 mm/sec X-axes 600 mm 200 mm Z1+Z2 axes controlled by cnc 0.-3600 mm Number of working hours 29150 h length 4800 mm width 2200 mm height 2650 mm weight 16450 kg total power requirement 25 kW weight of the machine ca. 16,5 t dimensions of the machine ca. 5x2,5x3 m

Condition: ready for operation (used), Year of construction: 2022, operating hours: 6,700 h, General Data Measurements width 4150 mm Measurements depth 2020 mm Measurements height 3165 mm Machine weight 15000 kg Cgsb Ha D Sswgf Exj Ijt Control Unit Brand AMADA Model AMNC3i Main Drive Pressing force 1700 kN Bending length 3110 mm Number of axis 10 Media Power consumption 26 kVa Additional Equipment Electronic handwheel for interactive programming Foot switch with panic-stop function Digipro angle measuring system with infrared data transmission This Amada HG-1703 Bending machine was manufactured in the year 2022 in France and has 6700 production hours. It is equipped with an AMADA AMNC3i control unit and has 10 axis. The machine has a pressing force of 1700 kN and bending length of 3110 mm. Application Types Bending

Condition: used, Year of construction: 2000, total height: 2,400 mm, total width: 2,200 mm, total length: 3,500 mm, Weight: 11.000 kg Price: On request Controlled axes: Y1-Y2 + X-R-Z1-Z2 + I+Crowning Wila Hydraulic clamping Angle-measurement - Distance between columns: 2800mm - Number of axes: 6 - Throat depth: 410mm - Back gauge: 1 - Power: 130.0ton - Max. working width: 3050mm - Year: 2000 - Documentation available: Yes - CE mark available: Yes - Serial number: 885669 - Control: CNC - Transport dimensions: 3500mm x 2200mm x 2400mm (l x w x h) - Transport weight [kg]: 11000kg Csb Ha D Sjwf Uxlo Iogt - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 2021, Outstanding Bystronic press brake from 2021 including a large set of bending tools. Can be viewed under power upon appointment in France and available for immediate purchase. Full technical description and options in the attached document. Maximum stroke: 450 mm Working length: 3,100 mm Maximum pressure force: 1,500 kN Machine weight: 13,200 kg Csb Ha Dowf I Ere S Isgt Operating hours: 6800h

Condition: used, Year of construction: 2003, Pressure 225 t Bending length 4050 mm Column width 3550 mm Control system: CYBELEC DNC 1200PS ECO Oil volume 400 l Total power requirement 22 kW Csb Haev Uz Hce D S Isgt Machine weight approx. 18,100 kg Accessories/Equipment: - 2 bending aids in front of the machine - Light barrier in front of the machine - Foot switch - CYBELEC DNC 1200PS ECO - Parking space for bending aids on the left - 2 stop fingers - Crowning - Die shift - EHT tool holder top and bottom - Controlled axes: y1, y2, x, R, z1, z2 - Set of bending tools

Condition: good (used), Year of construction: 1999, operating hours: 10,500 h, Functionality: fully functional, machine/vehicle number: HFBO1033R990221, Approx. 10,450 operating hours year of manufacture 1999 S/N HFBO 10 33 R990221 400 V // 50 Hz // 9 kW max. pressing force: 1,000 kN max. stroke: 200 mm stopping time: 60 ms stopping distance: 6 mm Cgebowg Sa Aj Ha D S Ist Machine comes with accessories. Condition: Good and ready for re installation.

Year of construction: 2022, Condition: new, immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - max. bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T controller - WILA upper tool clamp - 60mm table with 13.5mm x 22mm slot for insert dies Cgjb Hasiwfp Ts D S Iot - 2 front support arms sliding on linear guide - CE Fiessler Akas IIF light barrier - 24 months warranty - Commissioning, training

Condition: excellent (used), Year of construction: 1997, Functionality: fully functional, total height: 2,705 mm, back gauge travel distance Z-axis: 1,000 mm, back gauge travel distance R-axis: 90 mm, installation height: 427 mm, pressing force: 150 t, total width: 2,040 mm, total length: 4,730 mm, throat depth: 300 mm, overall weight: 12,500 kg, operating speed: 11 mm/s, distance between stands: 3,050 mm, bending length: 3,550 mm, retraction speed: 110 mm/s, throat depth of stand: 300 mm, type of input current: three-phase, travel distance X-axis: 1,000 mm, travel distance Y-axis: 5 mm, working length: 3,550 mm, stroke distance: 200 mm, input voltage: 380 V, throat depth in side stand: 300 mm, working height: 940 mm, power of the servo motor: 18 W, tool mount: 3,550 mm, working width: 3,550 mm, working stroke: 200 mm, travel distance R-axis: 90 mm, Delem DA 58e control system Including a comprehensive package of segmented upper and lower tools, Hydraulic upper tool clamping, mechanical lower tool clamping Ceb Ha D Ssvlv E Us Iegt Height-adjustable support table

Condition: good (used), Year of construction: 2001, Press force: 175 tons Cjb Ha Dowfftto S Isgt Bending length: 3050 mm Machine no longer powered

Condition: good (used), Year of construction: 1988, Press brake with a maximum press force of 110 tons Maximum press length: 3100 mm Csb Hjwgv U Dja D S Isgt Hydraulic motor: 7.5 kW

Condition: good (used), Year of construction: 2003, pressing force: 160 t, overall weight: 14,000 kg, Pressure 160 t folding length 3050 mm column width 2550 mm Cob Hasp R Hcwj D S Isgt Control CYBELEC VisiTouch Pac ram stroke 300 mm weight 14000 kg

Condition: used, knife sets for a press brake total 3 sets of upper knives (total 12 knives of 835mm long) 2 sets of lower knives. (total 8 dies of 835mm long) 1 x divisible upper beam 1 x bending block set Cgsbewgppze Ha D S Iot the mentioned price of €3500 is for the entire lot together. for the dimensions of the mounting for the upper knife see image

Condition: new, Year of construction: 2023, operating hours: 0 h, new IMMEDIATELY available CNC press brake YAWEI PBC50/2050-4C - Pressing force: 500KN - max. bending length: 2050mm - Year of construction 2023 Cgsb Ha D Soqgcrns Iet - CNC controlled hydraulic crowning - Cybelec VISITOUCH 19T control - WILA hydraulic upper tool clamping - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with Fiessler AKAS II - 12 months warranty - Commissioning, training

Condition: used, Year of construction: 2013, pressure 175 t chamfer lenght 3050 mm distance between columns 2600 mm Cjbsv Az Txj Ha D S Isgt column arm 410 mm ajustment speed 120 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec stroke 265 mm dayligth 530 mm table height 900 mm oil volume 200 ltr. control DNC 880 S total power requirement 18.5 kW weight of the machine ca. 11250 kg. range L-W-H 4570 x 2360 x 2900 mm good condition (!!) current new price approx. 85.000 euros special price on request - in checked condition - machine video - ?v=ro3z_gjfDLU Equipment: - electro-hydraulic CNC press brake - two synchronized cylinders with "HIGH PERFORMANCE" hydraulic components - with CYBELEC CNC control - "DNC 880S" * 2D graphic display for display and multiple simulation * graphic 2D programming * easy handling * automatic bending sequence calculation and collision detection * large product and tool library * automatic tonnage calculation (pressure) - swiveling operation, front right - CNC controlled axes: Y1 + Y2 + X + R + CNC crowning - upper beam with solid, self-lubricating four-way guide - CNC electro-motorized back stop (X axis) * with 2x manual adjustable stop finger * Adjustment range up to max. 650 mm - CNC electro-motor height adjustment of the rear stop (R axis) * Adjustment range up to max. 250 mm - CNC electro-motor table camber - AMADA/PROMECAM upper tool clamp * incl. split upper tool set - AMADA/PROMECAM lower tool holder, incl. die shoe * incl. split 1-V die (V=20 mm) - FIESSLER LASER safety device at the front - 2x front, movable support arms ("Sliding" system) - side safety device (swinging doors) - rear safety device (swinging door) - 1x freely movable foot switch - large hydraulic oil tank to keep the operating temperature low - original operating instructions

Condition: used, Year of construction: 1992, Functionality: fully functional, total height: 3,852,626 mm, AMADA PRESS BRAKE HFBO Csb Howdw Ugoa D S Iogt 4M125T YEAR 1992 MACHINES DISCONNECTED SOLD AS IS WITHOUT WARRANTY

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: 210860, installation height: 480 mm, pressing force: 150 t, bending length: 3,050 mm, stroke distance: 280 mm, TECHNICAL DETAILS Bending length: max. 3,050 mm Stroke: max. 280 mm Installation height: max. 480 mm Press force: max. 1,500 kN Oil volume: 400 l Control type: UN9D1APSE MACHINE DETAILS Cobjwgcfio Ha D S Isgt Current type: 3-phase Frequency: 50 Hz Operating voltage: 400 V Control voltage: AC 230/24 V Rated current: 45 A Rated current of the main fuse: 80 A Power of the main motor: 18.5 kW EQUIPMENT - Various special tools

Condition: good (used), Year of construction: 2010, Pressure 135 t folding length 3050 mm Control system CYBELEC DNC 880S Machine weight approx. 7500 kg Equipment - Controlled axes: Y1, Y2, X, R - 1 set of upper and lower tools - AMADA tool holder - crowning Cgeb Ha Djt N Rh Us S Iet - 2x support arms - foot switch - 2x side safety doors - laser safe - 4x manually adjustable stop fingers

Condition: new, total height: 2,600 mm, back gauge: 600 mm, pressing force: 160 t, total width: 2,000 mm, total length: 4,100 mm, throat depth: 450 mm, overall weight: 10,000 kg, operating speed: 10 mm/s, distance between stands: 2,600 mm, table height: 220 mm, bending length: 3,200 mm, warranty duration: 12 months, Equipment: safety light barrier, No. Name Parameter Unit 1 Nominal force 1600 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm Csb Haewcyb He D S Iegt 4 Distance between vertical 2600 mm 5 Stroke 200 mm 6 Equipping die height 500 mm 7 Throat depth 450 mm 8 Control axes 8+1 Axes Y1, Y2, X, R+V, Z1,Z2 9 Y axis working speed Quick down 180 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1446r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4100 mm Width 2000 mm Height 2600 mm 16 Weight(Approximate) 10000 Kg

Condition: good (used), Year of construction: 1995, Pressure 150 t folding length 4050 mm Cgeb Ha D Sog T S Auj Iet column width 3550 mm Control CYBELEC ModEva Pac throat 350 mm distance table / ram 430 mm Table width 250 mm Total power requirement 18,5 kW machine weight approx. 14.500 kg space requirement approx. 4400x2100x3300 mm only available from April 2022

Condition: good (used), Year of construction: 2008, Pressure 175 t Folding length 3550 mm Stroke max. 410 mm Weight 14,500 kg Machine height 3200 mm Cybelec Modea 10 S control system Operating hours: 23,712 h Cgob Ha D Sory U Auo Iet controlled axes: y1,y2,X,R,Z1,Z2,crowning Wila tool holder hydraulic upper and lower tool clamping Cybelec Modeva 10 S control system 2x material support arm Lasersafe Fissler 2x man. Stop fingers Two-hand-foot operation Die displacement

Year of construction: 1993, Condition: good (used), Pressure 150 t Cjb Ha Djgz S S So S Iogt folding length 3550 mm column width 3050 mm Control Cybelec DNC 880S stroke 700 mm throat 350 mm machine weight approx. 15.000 kg machine height 3.900 mm Accessories/equipment: - Bending aid in front of the machine - Parking space for bending aid - 3 pieces stop fingers