Used CNC punching and nibbling machines - travel distance 0-1999mm for sale (26)

Condition: ready for operation (used), Year of construction: 1998, punching force: 22 t, total height: 2,300 mm, sheet thickness (max.): 6 mm, overall weight: 13,800 kg, table width: 3,000 mm, table length: 1,500 mm, table load: 100 kg, controller manufacturer: TRUMPF, product length (max.): 6,900 mm, This TRUMPF TRUMATIC 500 was manufactured in 1998. It features a maximum punching force of 220 kN and can handle sheet thicknesses up to 6 mm. The machine accommodates workpieces up to 150 kg, with a working range of 3000 mm on the X-axis and 1500 mm on the Y-axis. Contact us for more information about this machine. • Maximum punching force: 220 kN (approx. 22 t) • X-axis working range: 3000 mm without repositioning • Y-axis working range: 1500 mm • Maximum sheet thickness (steel): 6 mm • Maximum punching diameter: 76.2 mm • Maximum workpiece weight: 150 kg • X-axis speed: up to 90 m/min • Y-axis speed: up to 60 m/min • Stroke rate: up to 900 strokes/min in nibbling mode • Power supply: 400 V / 50 Hz, three-phase • Connected electrical load: approx. 19 kVA • Required compressed air pressure: 6 bar The machine is in working condition. It includes a large set of punches, dies, and tool holders. Dimensions Dkedpfsx Uqzzox Am Sjn Machine Depth 6000 mm

Condition: ready for operation (used), Year of construction: 2005, punching force: 31 t, sheet thickness (max.): 6 mm, controller manufacturer: FAGOR, controller model: CNC 8070 Compact, CNC Punching Machine manufactured in 2005. This DANOBAT P1631 features a punching force of 30 tons and can handle a maximum sheet thickness of 6 mm. It includes an automatic loading system, servo-driven axes, and a hydraulic punching system. If you are looking to get high-quality punching capabilities, consider the DANOBAT P1631 machine we have for sale. Contact us for further details. • Machine features: • Servo-driven axes • Hydraulic punching system • Bosch hydraulic axis system • Sercos bus communication • Central lubrication system • Automatic indexing system • Scrap extraction system • Scrap suction unit • Optical safety barriers • Automatic clamps: 3 pcs • Sheet thickness measuring system • Encoder feedback on servo axes Dedpfxjzbt Ays Am Sskn • Axes: • X axis • Y axis • Y1 axis • T Punch axis • T Die axis • C Punch axis • C Die axis • U2 loading axis • V axis (hammer rotation) • Z3 axis (sorting axis vertical up/down movement) • U3 axis (sorting arm lateral movement) • V3 axis (sorting arm lateral movement) • W3 axis (sorting arm lateral movement) • X3 axis (sorting system translation axis) • Electrical data: • Voltage: 3x400V + PE • Frequency: 50/60 Hz • Main transformer: 30 kVA • 24V / 20A power supply Additional equipment • Automatic sheet loader (automatic loading system) • Automatic sheet elevator • Vacuum sheet handling system • Vacuum suction cups • Sheet separator blowing system • Ultrasonic height detector • Automatic centering system • OMRON inverter system • Electrical cabinet cooling fan

Condition: ready for operation (used), Year of construction: 2020, total height: 2,220 mm, overall weight: 14,000 kg, controller manufacturer: BOSCH, controller model: MTX, number of axes: 6, This 6-axis Baykal BPM-T 1525X30 was manufactured in 2020, featuring a robust 30-ton hydraulic punching force and a versatile tooling system with 20 stations and indexable tool holders. It supports a working range of 3000 × 1500 mm and rapid axis speeds (X: 100 m/min, Y: 80 m/min). Equipped with Bosch MTX CNC control and Lantek CAM software, it ensures precision and efficiency. If you are looking to get high-quality punching capabilities, consider the Baykal BPM-T 1525X30 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic Motor Power: 11 kW • Axes Drive Type (C1 and C2): Direct drive • Hydraulic Punching Force: 30 tons • Portable CNC Control Panel • Work Chute: Automatic system to take out cut parts • Mobile Storage Box for Cut Parts • Waste Box • Light Barriers Machine Benefits Technical Machine Benefits • Ce conformity • Maximum sheet thickness: 6. 4 mm • Maximum punching rate: 1 mm nibbling: 900 hits/min 25 mm nibbling: 580 hits/min • Maximum punching diameter (for 6. 4 mm thickness): 25 mm • Number of clamps: 3 • Tables: movable in y axis • Table height: 980 mm • Movable table: 1300 × 5200 mm with ball transfers Extra Information The machine is in excellent condition, has only a few hours of operation, and is like new. Control Unit Control: Bosch MTX Operating System: Windows Hard Disk: 150 GB Dkjdpfx Aezbiybsm Ssn CPU: 2 GHz RAM: 2 GB Data Transfer: USB stick memory Display: 12" TFT LCD color screen Movement Axes: 6 (X, Y, Z, C1, C2, T) Axis Speeds: X: 100 m/min Y: 80 m/min X + Y combined: 128 m/min C1 / C2 rotation: 300 rot/min T axis: 20 rot/min Repositioning: Available Positioning Accuracy: ±0.1 mm Repeatability: 0.04 mm CAM Nesting Software: Lantek Turret Tool Rotation: Indexable Multitools Support: Available (3 or 8 tools) Total Number of Tool Stations: 20 Indexable Tool Holders: Standard 4 (option up to 10) Tool Change Time (multitools): 0.3 s Maximum Tool Change Time (turret): 3 s Dimensions Machine Depth 6370 mm

Condition: good (used), Year of construction: 2017, operating hours: 48,888 h, functionality: fully functional, X Working area max.: 2000 mm (without repositioning) Y Working area max.: 1250 mm Operating hours: 48,888 hours Control system: Bosch PNC-P Machine - C-frame - Coordinate guidance - Linear magazine with 15 positions for clamping claws and tools - Hydraulic clamping claws (2 pieces) - Drives with maintenance-free three-phase motors - Repositioning device with programmable pressure plate - 1st stop pin (right inside) - Dividing slide Punching head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure plate position - Tool length compensation - Spray lubrication for the punch - Punch slug extraction - Forming function Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Operating panel with 15" TFT color screen - Integrated technology data - Teleservice interface via the internet - Automatic shutdown - Program management - Production plan Data transfer - USB interface - RJ45 network connection Dkjdpfx Ajza E Huem Sen Safety - CE marking - Multi-beam light curtains - Rapid shutdown of drives Extended standard equipment - Ball tables - Chip container - Initial oil filling - Additional clamping claw - Foot switch for start - Bulge detection - Vibration-damped installation - 5 RTC cassettes with die holders

Condition: used, Year of construction: 2001, gebraucht Dodpfx Amswirkge Sjkn 2001 9647 prompt, Zwischenverkauf v Italien 24400 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 1997, EUROMAC CX 1000 PRESSURE 30t TABLE DIMENSIONS: 1000χ2000mm MULTITOOL 6 POSITIONS DIAMETER Φ24 SHEET METAL THICKNESS 6MM IN TOP CONDITION WITH EXTRA TOOLS Dkodpfxencdvbj Am Sen MADE IN ITALY

Condition: like new (used), Year of construction: 2012, operating hours: 47 h, MACHINE WITH ONLY 47 working hours. Dkodsrcb Hqepfx Am Sjn Tested by ERMAKSAN FRANCE. COMPLETE DATA CAN BE FOUND IN DOCUMENTS FANUC CONTROL

Condition: used, Year of construction: 2012, y-axis 1.250 mm x-axis 1.300 mm Punching force 300 kN Overall size ca. 3,7 x 2,3 x 2,0 m weight ca. 7 t In our estimation, the machine is in like-new condition and can be inspected under power by appointment. - Includes various accessories Djdpfx Aey T Sb Hsm Sekn Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: ready for operation (used), Year of construction: 2013, punching force: 41 t, sheet thickness (max.): 16 mm, CNC punching machine manufactured in 2013. This EHRT Holecut 40-9 features an automatic infeeding system for materials up to 4.2 m long and gripper jaws accommodating material thickness from 3 to 15 mm. It supports up to 9 tools in storage and has a punching rate of 70 SPM. If you are looking to get high-quality punching capabilities, consider the EHRT Holecut 40-9 machine we have for sale. Contact us for further details. • Performance: • Up to 9 tools in storage • Axes acceleration: 3 m/s2 • Punching rate: 70 SPM • Material specification: • Automatic infeeding system for material up to 4.2 m length • Material gripper jaws for thickness 3–15 mm • System dimensions: • Length: 12 131 (whole line) • Width: 4 240 (Ehrt) • Software: • PowerCut 6.0 software • PowerCut 6.0 second license • PowerCut network licence Additional equipment • Infeed table (loading from the right side) • Output conveyor with pushing station (after marking) Dkjdpjy Tvxpefx Am Sjn • Marking station • Barcode printer

Condition: used, Year of construction: 1993, sheet width 1550 mm plate length 2525 mm plate thickness 6,4 mm Punching capacity 200 kN speed of positioning X 50 m/min speed of positioning Y 50 m/mih no. of strokes 200 / 400 Hub/min control MNC 32000 Dedsvh Ndpepfx Am Sokn ATC 22 Pos total power requirement 7,5 kW

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,003 h, This Finn-Power TRS 6 SUV was manufactured in 2003. A robust CNC punching and shearing machine, it features a punching force of 300kN and shearing force of 250kN. It includes a turret with 20 tool positions and optional a sheet metal storage capable of handling 40 pallets. Ideal for high-quality punching capabilities. Contact us for more information. Additional information Dkedpsx D H Dbofx Am Sjn • Punching Force: 300 kN • Shearing Force: 250 kN • Various spare parts • Weight: 22000 kg • Optional: Sheet Metal Storage: 40 pallets, 3000 x 1500 x 150 mm

Condition: ready for operation (used), Year of construction: 2001, punching force: 31 t, sheet thickness (max.): 5 mm, CNC punching machine manufactured in 2001. This Salvagnini S4-40 features a maximum sheet size of 4064 x 1524 mm and can process materials up to 5 mm thick, including mild steel and aluminum. It includes a versatile H-type punching head with multiple stations for efficient operation. If you are looking to get high-quality punching capabilities, consider the Salvagnini S4-40 machine we have for sale. Contact us for further details. • Punching head: H-type • 40 stations – 70 kN • 4 stations – 120 kN • 2 rotating stations – 120 kN • 2 lower embossing stations (tonnage to be confirmed) • Sheet capacity: • Maximum sheet size: 4064 x 1524 mm • Minimum finished part size: 250 x 80 mm • Material thickness capacity: • Mild steel (410 N/mm²): 3.5 mm • High strength steel (600 N/mm²): 2.0 mm • Aluminium (260 N/mm²): 5.0 mm • Stainless steel: 3.5 mm • Processable material strength: • 600 N/mm² at 2 mm thickness • 410 N/mm² at 3.5 mm thickness • 260 N/mm² at 5 mm thickness • Electrical data: • Voltage: 400 V • Frequency: 50 Hz • Installed power: 79 kVA • Nominal current: 114 A • Compressed air: 6–12 bar required pressure • Nominal punching force: approx. 300 kN / 30 tons (to be confirmed; exact official records/nameplate data not available) Dksdsy H I Atopfx Am Sjn • Recorded hours: 53,019 h (2025 service report) Additional equipment • Loader magazine: MD4015

Condition: ready for operation (used), Year of construction: 2002, This HONESS V250-3000 was manufactured in 2002. A profile punching machine for tubes and profiles, it features a self-centering product clamp and interchangeable clamping jaws for various tube types. It can handle tubes up to 100 mm wide and 80 mm high, with a maximum punching diameter of 40 mm. Ideal for high-speed punching with a carriage travel speed of 40 m/min. Contact us for more information about this machine. • Workpiece clamping: • Self-centering product clamp, gripping the tube from the outside • Interchangeable clamping jaws for different tube/profile types • Adjustable clamp position for accurate alignment • Workpiece dimensions: • Max product width (single-sided punching): 100 mm • Max product height (single-sided punching): 80 mm • Max product height for through holes: 60 mm • Max travel of product clamps: 3,100 mm • Minimum distance from tube end to first punchable hole: 30 mm Dsdpfx Aey Hrp Rsm Sjkn • Punching capacity: • Max punching diameter (as delivered, through holes): Ø40 mm • Punching station: Single vertical punching cylinder • Max punching force: 250 kN at 220 bar working pressure • Max vertical stroke of punching cylinder: 80 mm • Performance: • Max strokes per minute: Dependent on cylinder stroke setting and hole pitch • Clamp carriage travel speed: approx. 40 m/min • Positioning repeatability: ±0.1 mm • Machine size and range: • Punching machine working range: > 3.10 m • Support table length: 3.00 m

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, punching force: 30 t, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, overall weight: 6,950 kg, EUROMAC PUNCHING MACHINE MOD. 1250/30 – 2000 AUTOINDEX YEAR 2009 – CE – FULLY REFURBISHED, AS NEW. Maximum punching force: 300 kN Y-axis travel with multitool: 1300 mm Y-axis travel with single punch: 1250 mm X-axis travel: 1250 x 2000 mm Automatic repositioning: Up to 10,000 mm Punch stroke adjustment: from 0.1 to 31 mm Autoindex multitool stations: 5 Dedjy Dgrnjpfx Am Sekn Rotational speed: Programmable Y + X 1250 speed: 50 m/min Y + X 2000 speed: 60 m/min Positioning accuracy: +/- 0.1 mm Clamp opening: 11 mm Maximum strokes: 300 (1/min) Maximum sheet thickness: 10 mm Maximum punching diameter: 81 mm Installed power during operation: 7.5 kW Year: 2009 CE marked machine Overall dimensions: 2000 x 4000 x h 3350 mm Weight: 6950 kg

Condition: ready for operation (used), Year of construction: 1991, punching force: 15 t, overall weight: 4,300 kg, product length (max.): 3,800 mm, CNC punching machine manufactured in 1991. This TRUMPF TRUMATIC 120R features a punching force of 15 tons and a maximum punching diameter of 38 mm. It offers a working area of 1000 x 2000 mm with repositioning and includes a complete set of tools. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 120R machine we have for sale. Contact us for further details regarding this machine. • Maximum sheet thickness: 4 mm • Maximum punching diameter: 38 mm Dksdpeymz Rcjfx Am Sen • Working area without repositioning: 1000 x 1000 mm • Working area with one repositioning: 1000 x 2000 mm • X/Y axis speed: not specified • Rotation speed: 360 degrees per second (full rotation) • Maximum stroke rate: 340 strokes per minute • Control system: TRUMAGRAPH CC 200 • Automatic tool change: 9 tool stations • Power requirement: 15 kVA / 50 Hz • Documentation: Complete documentation included, together with machine history Additional equipment • Large set of tools • Two additional tables to extend the working area

Condition: excellent (used), Year of construction: 2018, operating hours: 1,600 h, functionality: fully functional, machine/vehicle number: 441, punching force: 28 t, total height: 2,020 mm, total width: 4,118 mm, total length: 4,042 mm, sheet thickness (max.): 6 mm, type of input current: three-phase, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, punching diameter: 105 mm, workpiece weight (max.): 200 kg, overall weight: 8,400 kg, table width: 1,250 mm, table length: 2,000 mm, input current: 35 A, input frequency: 50 Hz, power of the servo motor: 3,700 W, feed rate X-axis: 120 m/min, feed rate Y-axis: 75 m/min, space requirement width: 4,100 mm, space requirement length: 4,600 mm, space requirement height: 2,200 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,250 mm, positioning speed: 60 m/min, construction width: 4,118 mm, tool length: 30 mm, positioning accuracy: 0.05 mm, repeat accuracy: 0.025 mm, Equipment: safety light barrier, The Boschert Compact 1250 rotation machine is fully operational. Please contact us to arrange a viewing. Dkodpfxeww U T Hs Am Sjn

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Euromac hydraulic punching machine Type CX750/30/2000 Capacity 30 t Dkedpfx Asyxmhlsm Son Y-axis reach: 1000 mm X-axis reach: 2000 mm X-axis reach with repositioning up to 10,000 mm CNC control: Euromac Eurowin 6-station multitool + with 6-station die holder

Condition: used, Year of construction: 2018, GENERAL TECHNICAL DATA: Performance • Maximum speed: up to 400 m/min • Speed dependent on material properties and slitting conditions Web & Dimensions Working width: 40 – 400 mm Maximum web width: 400 – 450 mm Roll Specifications Maximum unwind roll diameter: 520 mm Maximum rewind roll diameter: 520 mm Maximum roll weight: 100 kg Core diameters: • Unwinding: 76 mm (3”), adapter 120 mm • Rewinding: 76 mm (3”), adapter 120 mm Materials • Paper • Aluminium • Laminates • Flexible films • Material thickness: - Films: 30 – 100 µm Electrical Data Main supply: 3 × 400 V, 50 Hz Dkedjyx Dc Tepfx Am Sjn Auxiliary voltage: 220 V AC / 24 V DC Installed power: approx. 8 kW Pneumatic Requirements • Air pressure: 6 bar Machine Features • Center winding system with contact rollers • Shaft winding system (expandable mandrels) • Reversible winding direction • Edge guiding system (FIFE with SE46C sensor) • Glue table with 2 independent clamping bars Cooling System • Electrical cabinet cooling: Water cooling (HÄWA) Noise Level • Sound level: < 75–80 dB Safety • Floor scanner • Side protection fence

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,724 h, total height: 2,252 mm, overall weight: 9,300 kg, product length (max.): 5,000 mm, This TRUMPF TRUPUNCH 3000 (S11) was manufactured in 2012. It features a Bosch Rexroth MTX CMP70 control, a maximum sheet format of 2,500 × 1,250 mm, and can handle sheet thicknesses up to 6.4 mm. The punching force reaches 180 kN, with a maximum workpiece weight of 160 kg. It includes a linear magazine with 20 stations and supports various roller tools. Consider the opportunity to buy this TRUMPF TRUPUNCH 3000 (S11) CNC punching machine. Contact us for more information. • X-axis speed: 90 m/min • Y-axis speed: 60 m/min • Simultaneous X/Y speed: 108 m/min • C-axis speed: 330 rpm • Max. punching force: 180 kN • Max. pressure foot force: 20 kN • Max. workpiece weight: 160 kg • Max. sheet thickness: 6.4 mm • Max. sheet format: 2500 × 1250 mm (with repositioning) • Electrical connected load: 18 kVA • Fuse protection: 35 A • Pneumatic connection: 7–14 bar • Compressed air consumption: 8–10 Nm³/h • Tapping • Filling level inspection • Multibend • Multitool Dedpfxjx Urcgj Am Sekn • Roller tools including cutting, pinching, folding, beading, knurling, deburring • Monitoring filling level • Hydraulic unit • Punch lubrication • Dimensions Machine Depth 6500 mm

Condition: like new (used), functionality: fully functional, punching force: 30 t, total length: 1,000 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Euromac Punching Machine Cx 1000/30, 30 Ton, CNC, Sheet Length 1000 mm, Maximum Thickness Standard Steel 6 mm. Used machine. Internal code: svr 405. Dsdpfeyv Hntsx Am Sekn

Year of construction: 2003, condition: good (used), Boschert EL500CNC Z TRUMPF quick tool change system Punching force: 280 kN (28 tons) Travel x- 1000 mm (repositioning up to 9999 mm) y- 580 mm punching arm throat: 730 mm Tooling system Trumpf Gr1-3(105mm) Labod 32040 graphic control / workshop programmable Max. Sheet thickness: 6 mm(jaw opening) Max. Lifting height: 90 mm up and down infinitely programmable. Punching slug extraction Table width left + right: 1100 mm each Table depth: 810 mm table height: 900 mm total width: 2582 mm total depth: 2800 mm total height: 2080 mm Dsdpfshr A Nvsx Am Sekn Driving power: 20 kVA Machine weight: 8.300 kg Hydraulic filling: 80 l Color: reseda green RAL6011/light gray RAL7035 Machine year 2003 Very well maintained condition with a lot of accessories Tool cabinet

Condition: used, Year of construction: 2011, EUROMAC MTX FLEX6 Dkedpfxeynkqzj Am Sjn

Condition: used, Year of construction: 1998, functionality: unexamined, punching force: 30 t, total height: 1,800 mm, total width: 2,800 mm, total length: 4,000 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Hydraulic punching press Euromac type CX 1000/30. Manufacturer: EUROMAC (Italy) - 1998. Specifications: - Single-station hydraulic punching machine - Press force: 30 t - Max. workable sheet in Y-X axis: 1000 mm x 10,000 mm (with repositioning) - Steel sheet thickness: 6 mm - Max. punch diameter, station D: 80 mm - 200 strokes per minute Number of sheet holders: 2 Dimensions (LxWxH): 4000x2800x1800 mm, Weight: 5230 kg, Drive: 7.5 kW Dksdpfx Asyi Uknsm Sen

Condition: used, Year of construction: 1997, sheet width 1015 mm plate length 1015 mm Dodpfx Amjuiz Iwo Sjkn plate thickness 6,0 mm Punching capacity 25 t punch diameter 88,9 mm total power requirement 16 kW weight of the machine ca. 12000 kg dimensions of the machine ca. 4000 x 2320 x 2300 mm Equipment: - Tool changer with 20 positions - FANUC Series O-P control - Foot pedal - Operating instructions (English)

Condition: used, Year of construction: 1982, functionality: fully functional, input voltage: 400 V, Amada Vela II – 30 Ton CNC Punching Machine (Thick Turret) For sale: Amada Vela II, a robust and reliable 30-ton CNC punching machine equipped with a Thick Turret system and bridge-frame construction. This machine is designed for demanding sheet-metal production, offering excellent stability, accuracy, and tooling capacity for both medium and high-volume manufacturing. Technical Specifications General Model: Amada Vela II Press Capacity: 30 tons Turret Style: Thick Turret Machine Control: FANUC CNC Frame Type: Bridge Frame Working Area & Capacity Maximum Traverse (X/Y): 1270 × 1270 mm Maximum Sheet Size with one reposition: 1270 × 2540 mm Maximum Material Thickness: 6.35 mm Maximum Material Weight: 100 kg Speed & Performance Maximum Hits per Minute: 350 Maximum Hits on 25 mm Centers: 220 Maximum Axis Speed: 50 m/min Turret Speed (bi-directional): 30 rpm Tooling Configuration (Thick Turret) A-Stations (12.7 mm): 24 pcs B-Stations (31.7 mm): 24 pcs C-Stations (50.8 mm): 4 pcs D-Stations (88.9 mm): 2 pcs E-Stations (114.3 mm): 2 pcs Total Tool Stations: 56 Power Requirements Press Motor: 3.7 kW Electrical Requirement: 15 kVA Air Requirement: 5.7 kg/cm² (approx. 5.6 bar) Air Consumption: 110 L/min Machine Weight: 14,500 kg Condition Dodpfxex Ei Tkj Am Sekn Machine is operational and suitable for production use. The thick-turret configuration provides wide tooling flexibility for a broad range of punching tasks. Pictures, videos, and transport quotations available. Note Verify all specifications with the seller.