Used beveling machines / weld bevelers for sale (27)

Condition: used, Year of construction: 1978, functionality: fully functional, sheet width . mm plate thickness . mm serial number 20719 total power requirement . kW weight of the machine ca. 1,4 t Rcedoucgvaopfx Apdeh

Condition: excellent (used), Year of construction: 2014, total width: 12,000 mm, total length: 10,000 mm, total height: 6,000 mm, overall weight: 92,000 kg, Length:10000mm Width:12000mm Height:6000mm Rjdpfxszcva Ds Apdoch Weight:92000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2021, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, operating speed: 2,600 mm/s, Cutting machine CEVISA - CHP-12 MACH-ID 9406 Make: CEVISA Type: CHP-12 Year: 2021 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Rsdozcng Ajpfx Apdech Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2013, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, input voltage: 3,000 V, operating speed: 2,600 mm/s, Cutting machine CEVISA - CHP 12 MACH-ID 9404 Make: CEVISA Type: CHP 12 Year: 2013 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm Rodszcngcopfx Apdjch   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace   Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2011, functionality: fully functional, GERIMA Rodpfxstmrkro Apdsch - The beveling machine is specifically engineered for high-precision processing on both linear and non-linear edges, with full adaptability to varying sheet thicknesses and geometries. -Featuring an advanced Trace Tracking System, it intelligently detects and follows complex part contours—ensuring accurate, consistent, and efficient beveling, even on intricate components.

Condition: good (used), Year of construction: 2017, Manufacturer: MIBA Type: NC-Milling Machine Control: Siemens TOUCH Year of manufacture: 2017 Rcsdpswq Hwdofx Apdoh Z Axis 1100 mm X Axis 1310 mm C Axis Endless Working range stage 1: 4000 - 8500 mm Working range stage 2: 4000 - 11,500 mm Specifications Metric US Standard There are (still) no specifications for this machine. Dimensions (Estimate) Length 14400 mm Width 12000 mm Height 6000 mm Weight 24000 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 6125, We sell a used CEVISA beveling machine CHP-60G INV, MFG 2024, SN: 6125 60 mm bevel length; capability in one run: 28 mm bevel length; bevel finish: machined (milling head); adjustable bevel speed depending on the material; optimum beveling speed: 500 mm/min; continual plate fixing pressure system: 4 Bar; 3 feeding rollers always in contact with the plate; 1 roller positioned in the cut-off point to insure: - no vibration; no noise; -smooth and unchanging finish; portable milling machine; mobile and stable; adjustable working height with pneumatic lifting system; electronic bevel adjustment; display: high precision; built-in adjustable bevel angles from 15º to 70º * Nominal thickness: from 10 mm to 100 mm. Motor: three-phase; motor power: 5 CV – 3.8 kW; voltage: 220/380 V. 50 Hz; 250/440 V. 60 Hz; 32 A plug, cable diameter: 2.5 millimeters, maximum consumption of the machine: max. 15A. Electric box with: thermomagnetic switch trip +emergency stop button, net weight: 800 kg; works height: adjustable from 760 to 940 mm; built-in trolley; bevel blueprint; plate beveling: K, V, X, and Y bevels, bevel speed: 0,5 m/min, three-phase motor: three phases and earth. no neutral, motor power: 5 hp - 3.8 kW, air flow rate 200 l/min. Electrical box: with under-voltage trip, emergency stop button, magneto-thermal protection; net weight of the beveling machine: 800kg, working height: adjustable from 760 to 940 millimeters. Integrated carriage. Price: 28.000 Euro + VAT, negotiable, FCA Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. Rjdpfx Apsv Ef Ryjdoch We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 2014, Manufacturer: MIBA Type: LNF65 Control: SIEMENS 840D Year: 2014 Specifications Rcedpfswq Hqkox Apdjh Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: good (used), Year of construction: 2014, total width: 600 mm, total length: 1,000 mm, total height: 600 mm, Manufacturer: MIBA Rcjdpswq Hp Tefx Apdjh Type: RNF-65 Year: 2014 Milling cutter laser guided Working range 2000 - 8000 mm Designed for mobile use on a 3000 mm gauge Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) There are (currently) no dimensions for this machine. Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: ready for operation (used), functionality: fully functional, Material thickness: 3 – 35 mm Cutting speed: variable, max. 1.8 m/min Minimum material length at edge: 60 mm Maximum edge width: 12 mm (adjustable) Edge head motor power: 400 W Edge head: resharpenable Edge angles: 30°, 45°, 22.5°, 37.5°, 50° Rodpsyk U I Aefx Apdsch Dimensions: 470 x 294 x 523 mm Machine weight: 30 kg

Year of construction: 1998, condition: good (used), Manufacturer unknown Year of manufacture: unknown TRAV H/2830 The Aro Corporation, Model 78051BSN Technical specifications: Rjdpfsf Axiljx Apdjch Pneumatically operated For internal milling operations, 50-225mm Accessories as shown in the picture

Year of construction: 1988, condition: good (used), machine/vehicle number: 73480-08, Offer 22679 Technical data: - Maximum sheet thickness: 50 mm - Minimum straight edge: 3 mm - Adjustable bevel angle: 25 - 55° - Working speed: 1.5 - 3.1 m/min - Crane attachment bracket Rsdpfx Aekzhawopdoch - Drive: 400 V / 4 kW - Approximate space requirement: W 1400 x D 1200 x H 1950 mm - Approximate weight: 1500 kg

Condition: used, Technical details: plate thickness: 10 mm Rjdpfxeu Ngfqj Apdjch material thickness: 4,5 - 10 mm capacity in W: 2000 Watt voltage: 220 mit 4 Meter-Kabel V machine weight approx.: 18 kg dimensions of machine: L: 550 x B: 120 x H: 260 mm WELDING EDGE SHAPER - GRINDING MACHINE or PLATE SHAPER Hand tool Application: cutting and notching of plate-shaped workpieces Material thickness depends on material (max. 10mm) Tool = lower knife (die) and upper knife punch) optional with accessories As in the picture, for 200,00 Euro *

Condition: good (used), Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos Rodpfx Aox Ehf Nepdsch -Box dimensions: 460/355/H355 mm -Total weight: 29.4 kg

Condition: good (used), Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine with accessories -Type: SKF 20 -Power: 1.1 kW Rcjdsx Ea Ayepfx Apdjh -Accessories: see photos -Box dimensions: 460/355/H355 mm -Total weight: 33.2 kg

Condition: excellent (used), Beveling Machine Stock Number: 9283 Manufacturer: Trumpf Year of Manufacture: Type: 104-0 Machine Number: Max. bevel length (infinitely adjustable): Mild steel at 400 N/mm²: 10 mm Mild steel at 600 N/mm²: 8 mm Mild steel at 800 N/mm²: 5 mm Working Speed: 2 m/min Rated Power: 2 kW Rcodpfx Ajwfzzmjpdsh Stroke Rate at Rated Load: 370 / min Material Thicknesses Min/Max: 3 / 25 mm Weight: 16.5 kg

Condition: good (used), Year of construction: 2000, Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with adjustable speed Rjdpfxey Rt Aaj Apdjch -Depth adjustment: 0 - 7 mm -Drive: 0.75 kW -Adjustable speed: 0 - 6000 rpm -Angle: 45° -Accessories: Widia milling head -Dimensions: 650/560/H1190 mm -Weight: 94 kg

Year of construction: 2000, condition: good (used), Offered for sale from an insolvency proceeding is a tube end machining machine. Manufacturer unknown Model: ?? Rjdpfsfynfwox Apdjch Year of manufacture: ?? Machine number: ?? Technical data: Operated with compressed air Tube diameter up to 401 mm possible Accessories as shown in the picture

Condition: good (used), Year of construction: 1992, machine/vehicle number: 454106, Technical data: Rcsdpfx Apefg Uvdedeh Min. / max. material thickness 3 - 25.0 mm Max. bevel length, steel 400N/mm² 10 mm Max. bevel length, steel 600N/mm² 8 mm Max. bevel length, steel 800N/mm² 5 mm Working speed, approx. 2.5 m/min Stroke rate 400 1/min Drive 400 V / 2000 Watt Space requirement, approx. W 550 x D 200 x H 300 mm Weight, approx. 13 kg

Year of construction: 1995, condition: good (used), machine/vehicle number: 4202, Technical specifications: Rcjdped Af Shofx Apdoh - Plate thickness up to 6 - 40 mm - Minimum pipe bevel diameter: 100 mm - Maximum bevel in a single pass: 10 mm - Working speed: 2.6 m/min - Power supply: 400 V / 2.2 kW - Space requirement: approx. W 550 x D 500 x H 700 mm - Weight: approx. 65 kg

Condition: ready for operation (used), Cutting systems Rodpfx Asibil Uepdjch Müller Martini medium-format cutting unit

Condition: used, Weld beveller, weld bevel former, weld seam preparation, weld bevel forming machine, edge milling machine, edge milling machine, mobile milling machine -with: rail system -12x rails length: 1210 mm -Bevel length: max. 30 mm -max material thickness: 40 mm Rcedped Izt Refx Apdsh -with: electronic feed device electronically adjustable -Dimensions box: 1170/780/H510 mm -Weight: 320 kg

Condition: good (used), Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine Rcedod Nzgvopfx Apdeh -Edge milling: 0 - 3 mm -Drive: 0.45 kW -Angle: adjustable -Dimensions: 485/345/H250 mm -Weight: 18.2 kg

Condition: used, Welding edge former, edge former, edge beveling machine TRUMPF Beveling of steel plates for weld preparation Type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10 mm Bevel angle: 30° Rcedpfx Aodz Sq Eepdeh Power: 2000 watts Mains connection: 220 volts, 50 Hz - Equipped with a guide bracket for a 30° bevel angle - Resharpenable impact steel for high tool utilization - Set up for 20 mm sheet metal For beveling straight and curved edges with a minimum radius of 40 mm. For beveling edges on flat and curved workpieces, as well as tubes with an inner diameter of at least 80 mm. Weight: 14 kg

Condition: new, Year of construction: 2026, -Tfon Bevel Wizard® Linear. -Precision Beveling for Linear & Non-Linear Applications. -The TFON Bevel Wizard® Linear is a high-performance beveling solution designed to deliver exceptional accuracy on both straight and contoured sheet edges. Engineered with flexibility at its core, it features an advanced Trace Tracking System that automatically adjusts to variations in material thickness and geometry—ensuring precise and consistent edge processing even for complex parts. Rcjdpfxjrt Tpns Apdsh -Key Features 🔹 Advanced Trace Tracking System: Intelligently detects and adapts to diverse edge shapes and contours in real time. 🔹 Wide Beveling Range: Adjustable bevel angles from -30° to +80°, ideal for a broad range of applications. - Optimized for Large Workpieces: Capable of processing materials up to 12,000 mm in length and 100 mm in thickness. - Industrial-Grade Durability: Built to last with a solid 10,000 kg frame for long-term reliability. 🔹 Superior Surface Finish: Delivers a high-quality finish with a consistent Emery Band Rotation Speed of 30 m/min and a Ø135 mm contact wheel. -Technical Specifications: Beveling Angle Range: -30° to +80° -Material Thickness: 4 – 100 mm. -Minimum Material Width: 250 mm. Minimum Material Length: 250 mm Maximum Material Length: 12,000 mm Part Feed Speed: 1.5 – 5 m/min Part Completion Speed: 3 meters/day Maximum Part Indentation: Ø400 mm Emery Band Rotation Speed: 30 m/min Contact Wheel Diameter: Ø135 mm. Emery Band Drum Diameter: Ø400 mm. Machine Weight: 10,000 kg Engineered for precision. Built for performance. Designed for industrial excellence Tfon Bevel Wizard® Linear — Where Accuracy Meets Efficiency...