Used Punch presses with over 91t punching force for sale (22)

Condition: good (used), Year of construction: 2006, Pressing force 100 t Diameter 40 mm Bwehxyhljq Auatsbjl throat depth 760 mm Total power 8.5 kW Weight 3,600 kg

Condition: good (used), Year of construction: 2012, Functionality: fully functional, For sale: 1 piece used hole punch Manufacturer: Geka Bwshxeuihvzsyhlbel type: Puma 110 2HI Punching force: 110t incl. documentation Dimensions see type plate Machine can be inspected in our warehouse in 09599 Freiberg.

Condition: used, Year of construction: 2004, Technical details: throat: 510 mm working pressure: 250 bar Punching capacity: 1000 kN t round bar steel: bis Ø 65 x 12 und bis Ø 90 x 8,5 mm electr. connected load: 400V / 50Hz total power requirement: 7,5 kW weight of the machine ca.: ges. 2,6 t dimension machine xH: 1,9 x 1,0 x 2,1 m dimensions L x W x H: Wkz.-Schrank: 0,7 x 0,35 x 0,9 m hydraulic section steel shear Heavy-duty, robust electro-hydraulic hole punch with large throat depth -Punching device: punch holder with punch quick-change device up to Ø 31 mm, stripper size L: 360 x W: 300 mm -Punching table: LxW: 360 x 300 mm, punching support 360 x 300 mm with adjustment device and die holder Ø 50 x 25 mm (equipped with die Ø 16 mm) Number of strokes: Bohxju Ick Teyhlbowl -with 10 mm stroke = up to 45 strokes/min. -with 30 mm stroke = up to 22 strokes/min. -with 50 mm stroke = up to 14 strokes/min. Punching stroke: min. 10 mm and max. 50 mm Stroke length and stroke position adjustable Equipped with punch Ø 16 mm Foot switch The punching capacities refer to a material strength of 400 N/mm². Accessories: Various punching tools Punches and dies i.D. *

Condition: good (used), overall weight: 4,500 kg, throat depth: 750 mm, punching force: 140 t, ram stroke: 100 mm, Punching machine Peddinghaus Bshxyhovlpxbolbjwl type : Hydraulic 1400 N

Condition: good (used), Year of construction: 1990, machine/vehicle number: 0167690255832, Offer 23137 Technical data: - Pressure output 1000 KN - punches holes e.g. up to 40 mm Ø in steel 22 mm - or with special punching device up to 150 mm Ø in steel 4.0 mm - Stroke continuously adjustable from 0 to 70 mm Bshxjv Inztsyhlbjwl - Stroke rate at 20 mm travel up to 40 1/min - Throat depth 760 mm - Installation height 240 mm - Working height 1040 mm - Drive 400 V / 8.5 kW - Space requirement approx. W 750 x H 1900 x D 1750 mm - Weight approx. 1650 kg - with: - E.- foot switch - Punching device,

Condition: new, Year of construction: 2025, throat depth: 550 mm, punching force: 120 t, stroke distance: 40 mm, table width: 500 mm, power: 15 kW (20.39 HP), table length: 660 mm, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS SHEET METAL DRILLING PRESSES GENERAL FEATURES-EDP SERIES  Steel construction body, Bwehxyhjvyubdelbjl  Body and welded parts will be stress relieved with vibration.  Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Ram supported by 4 slides  Parts such as ram, connecting rod, steel casting, GS52  Dual axis servo driver  Connecting rod interior will be bronze, (Zr14)  Ratchet apparatus table-ram adjustment  Speed control unit  Automatic central lubrication,  PLC application and touch screen -DELTA  Electrical switchgear materials SIEMENS-SCHNEIDER TYPE SHEET METAL DRILLING PRESS BODY Capacity 120 tons Driver Size 1250 / 2500 mm Stroke (fixed) 40 mm Stroke Number/Minute 100 pcs /min / spm Ram Adjustment 100 mm Wall Distance 2500 a / mm Throat Opening 550 b / mm Table Ram Distance 380 c / mm Machine Depth Approx. 6000 d / mm Machine Height Approx. 3600 e / mm Machine Width Approx. 4000 g / mm Driver Height 920 h.i / mm Table Size 500 / 660 j.k / mm Table Hole Size 100 / 420 l.m / mm Ram Size 250 / 470 n / mm Mold Clamping Housing Diameter 55 mm Required Space for Machine Approx. 4000 / 7000 mm Motor Power 15 + 1.5 + 0.75 kW

Condition: used, Year of construction: 1981, pressure 100 t punching cross-cut in cmm -- stroke 100 mm throat 510 mm work height max. 1100 mm Twist power 31 Durchm. in 25 mm channels - flange 100-400 mm Number of ventilators 80-400 mm 100-400 mm 100-550 mm punch stroke bei 20 mm Hub: 60 p.Min sheet thickness max. bei Luftbiegung: 10 mm total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,7 x 0,9 x 2,3 m Machine dealer with own stock of 1600 m². Bwshxyhsvgnnqolbsl

Condition: good (used), Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg Bwshxyeik Sl Hohlbel

Condition: reconditioned (used), punching force: 100 t, sheet thickness steel (max.): 40 mm, Mubea / Muhr and Bender hole punching machine VP1000 - Hydraulic hole punch with CNC coordinate table - 5-punch tool with quick-change system and automatic punch selection Bshxyevl Hx Eehlbjwl - Punching force: 100 tons - Throat: 620 mm - Stroke: 60 mm - Punches up to: Ø 40 in 20 mm Ø 10 in 30 mm - Max. plate size: 1200 x 750 mm - Max. plate thickness: 40 mm - Travel speed 21 m/min Special tools and devices on request. Trade-in of used machines. Delivery possible throughout Europe.

Condition: used, Grindermak 150-06 Grindermak 150-06 New Punch press tool grinder based on the Amada Togu CNC grinder Grindermak 150 06 / For sale Table Stroke/movement 180mm Distance between table and wheel (max) 230mm Z movement 0,0001-20mm Cutting wheel Diameter (max) 150mm Bwshxyjfuakcehlbol Cutting wheel rotation 3400 D/dk Cutting wheel power 1,1kw-3000 D/dk Stroke engine (z) 400W Complete with touch screen. In stock. Amada Togu / Trumpf quick sharp type grinder / Quick grind / Quick set / Quick load/

Year of construction: 1976, Condition: good (used), machine/vehicle number: 42073743776003, Offer 20366 Technical data: - Pressure capacity 100 t - stroke infinitely variable 10 - 100 mm - stroke rate 34 - 80 1/min - throat 510 mm - installation height 500 mm - drive 380 V / 15 kW - punching e.g. up to 31 mm Ø in steel 25 mm - with special punch saddle e.g. up to 58 mm Ø in steel 13 mm - e.g. up to 90 mm Ø in steel 8,5 mm Behxyhlsklyzxjbowl - space requirement approx. W 1200 x H 2550 x D 2100 mm - Weight approx. 3700 kg - No tools or punching saddles available

Condition: new, Year of construction: 2025, throat depth: 600 mm, punching force: 150 t, stroke distance: 40 mm, table width: 550 mm, power: 18.5 kW (25.15 HP), table length: 700 mm, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS SHEET METAL DRILLING PRESSES GENERAL FEATURES-EDP SERIES  Steel construction body,  Body and welded parts will be stress relieved with vibration.  Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Ram supported by 4 slides  Parts such as ram, connecting rod, steel casting, GS52  Dual axis servo driver  Connecting rod interior will be bronze, (Zr14)  Ratchet apparatus table-ram adjustment  Speed control unit  Automatic central lubrication,  PLC application and touch screen -DELTA  Electrical switchgear materials SIEMENS-SCHNEIDER TYPE SHEET METAL DRILLING PRESS BODY Capacity 150 tons Driver Size 1250 / 2500 mm Stroke (fixed) 40 mm Stroke Number/Minute 100 pcs /min / spm Ram Adjustment 120 mm Wall Distance 2500 a / mm Throat Opening 600 b / mm Table Ram Distance 400 c / mm Machine Depth Approx. 6000 d / mm Machine Height Approx. 2600 e / mm Machine Width Approx. 4000 g / mm Driver Height 920 h.i / mm Table Size 550 / 700 j.k / mm Table Hole Size 100 / 420 l.m / mm Ram Size 290 / 500 n / mm Bwohevyuamoxyhlbjl Mold Clamping Housing Diameter 55 mm Required Space for Machine Approx. 4000 / 7000 mm Motor Power 18.5 + 2 + 1.5 kW Weight 13,000 kg

Condition: used, Year of construction: 1985, machine/vehicle number: 4209774385003, pressure:140 t stroke:12.100 mm Bwehxyerqiupehlbjl no. of strokes:12-38 Hub/min table width:800x 600 mm work height max.:1130 mm U-steel:100-400 mm I-beam:100-400 mm total power requirement:11 kW dimensions of the machine ca.:2200 x 1500 x 2800 mm weight of the machine ca.:4500 kg

Year of construction: 1975, Condition: used, Mechanical punch with a punching force of 1000kN. Tool holder for stamps up to 90 mm can be mounted on request. A large assortment of punches and matrices is included. Bwjhxsf Nwqaeyhlbjl

Condition: used, pressure 100 t punching cross-cut in cmm Ø 31 in 25 mm stroke 10 - 50 mm column arm 510 mm work height max. 1100 mm no. of strokes 14 - 45 Hub/min punch diameter max. Ø 90.0 mm oil volume 103 l total power requirement 7.5 kW weight of the machine ca. 2400 kg. range L-W-H 1750 x 1020 x 2050 mm maintained condition (!!) New price without accessories approx. 25.000 euros Bshxot Ev Swsyhlbjwl Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual

Condition: used, Automatic High Quality Grinding Automatic High Quality Grinding Machine Type : Other All punch operators know the importance of tool maintenance on part quality and tool life. The AMADA TOGU is the solution; an automatic tool grinder design specifically for high quality grinding of sheet metal tooling. Bjhxyhofuai Uolbewl Unmanned operation Simple operator control Quick, reliable grinding of all standard tooling Supplied with jigs for shear angle grinding Restores tooling to optimum condition resulting in high quality parts Enables regular regrinding to maximise tool life USED AMADA AUTOMATIC TOOL GRINDER MODEL TOGU-III MACHINE SPECIFICATIONS Model ……………. TOGU-III Max. Diameter Tool Size ……………. 6.30 Max. Grinding …………… .039” Main Axis Motor …………… 2 H.P. 2 P Main Axis Rotation Speed ………….. 3000R.P.M. (60Hz) Main Axis Travel …………… 9.45” Main Axis Feed Motor …………….. DC Servo Motor (0.05 H.P.) Main Axis Feed Speed-High ………… 23.6 I.P.M. Main Axis Feed Speed-Middle ………. 2.36 I.P.M. Main Axis Feed Speed-Low …………. 0.002 I.P.M. Table Motor ……………. 0.134 H.P. 4P Table Rotation Speed …………… 72 R.P.M. (60Hz) Cooling Water Pump Motor ………….. 0.08 H.P. 2P Cooling Water Pump Flow …………… 0.9 CFM (60 Hz) Machine Weight …………….. 1,058 lbs Power Supply …………….. AC220V 3 Phase 2.5 kVA (Transformer Used Outside 220v Area) Air Supply …………… 60 C.F.M. Grinding Wheel …………….. CBN 5.31 Benefits: Fast and Easy to Use Fully automated machine Unmanned grinding cycle Easy operation – load ᐳ inputᐳ start Programmable re-grind amount High Quality Finish Automatic feed of wheel prevents tool burn Automatic grinding wheel dress indication Excellent surface finish Safe Unique safety locking system ensures operator safety Visual operation/standby indication Coolant and Filtration System Automatic coolant application prevents tool burn High quality finish maintained by filtration of coolant liquid

Year of construction: 1968, Condition: used, Peddinghaus hole punch year of construction '68 Bwshxjccqwljyhlbsl Hole punch 225 B 100 GJ128 special model - large delivery With many accessories

Condition: new, Year of construction: 2025, throat depth: 650 mm, punching force: 200 t, stroke distance: 40 mm, table width: 620 mm, power: 22 kW (29.91 HP), table length: 790 mm, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS SHEET METAL DRILLING PRESSES GENERAL FEATURES-EDP SERIES  Steel construction body, Bshjvyuagsxyhlbswl  Body and welded parts will be stress relieved with vibration.  Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Ram supported by 4 slides  Parts such as ram, connecting rod, steel casting, GS52  Dual axis servo driver  Connecting rod interior will be bronze, (Zr14)  Ratchet apparatus table-ram adjustment  Speed control unit  Automatic central lubrication,  PLC application and touch screen -DELTA  Electrical switchgear materials SIEMENS-SCHNEIDER TYPE SHEET METAL DRILLING PRESS BODY Capacity 200 tons Driver Size 1250 / 2500 mm Stroke (fixed) 40 mm Stroke Number/Minute 80 pcs /min / spm Ram Adjustment 120 mm Wall Distance 2500 a / mm Throat Opening 650 b / mm Table Ram Distance 420 c / mm Machine Depth Approx. 6000 d / mm Machine Height Approx. 2900 e / mm Machine Width Approx. 4000 g / mm Driver Height 1000 h.i / mm Table Size 620 / 790 j.k / mm Table Hole Size 100 / 420 l.m / mm Ram Size 350 / 620 n / mm Mold Clamping Housing Diameter 55 mm Required Space for Machine Approx. 4100 / 7000 mm Motor Power 22 + 2 + 1.5 kW Weight 19,000 kg

Condition: excellent (used), Year of construction: 1996, Excentrical press: Capacity: 100 ton Clutch: airclutch Behxyshtiwhshlbowl Gooseneck depth: 340 mm Slide adjustment: 10 > 130 mm Command: 400 mm Max distance plate -- slider: 300 mm Dimensions of the table: 950 x 630 mm Dia of passage in the table: 200 mm Dimension sole of the coul. (L x W): 560 x 320 mm Variable stroke: 10 > 130 mm Motor power: 8.5kW Length G -- D: 1500 mm Width Front -- Rear: 2380 mm Height: 2800mm Weight: 9.5 ton

Year of construction: 1997, Condition: used, punching force: 1000 kN mass: 2400 kg Bohxyheizuhpelbowl Punches e.g. a 40 mm hole in 20 mm steel Stroke triggering via foot switch Including viewfinder for center punching and setting up Assortment of tools is included in the price

Condition: new, Year of construction: 2025, throat depth: 650 mm, punching force: 300 t, stroke distance: 40 mm, table width: 1,020 mm, power: 22 kW (29.91 HP), table length: 700 mm, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS SHEET METAL DRILLING PRESSES GENERAL FEATURES-EDP SERIES  Steel construction body,  Body and welded parts will be stress relieved with vibration.  Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Ram supported by 4 slides  Parts such as ram, connecting rod, steel casting, GS52  Dual axis servo driver  Connecting rod interior will be bronze, (Zr14)  Ratchet apparatus table-ram adjustment  Speed control unit  Automatic central lubrication,  PLC application and touch screen -DELTA  Electrical switchgear materials SIEMENS-SCHNEIDER TYPE SHEET METAL DRILLING PRESS BODY Capacity 300 tons Driver Size 1250 / 2500 mm Stroke (fixed) 40 mm Stroke Number/Minute 80 pcs /min / spm Ram Adjustment 120 mm Wall Distance 2500 a / mm Throat Opening 650 b / mm Table Ram Distance 420 c / mm Machine Depth Approx. 7500 d / mm Machine Height Approx. 3000 e / mm Machine Width Approx. 4500 g / mm Driver Height 1000 h.i / mm Bshxyhsvyt U Nelbowl Table Size 700 / 1020 j.k / mm Table Hole Size 100 / 420 l.m / mm Ram Size 350 / 620 n / mm Mold Clamping Housing Diameter 55 mm Required Space for Machine Approx. 4100 / 7000 mm Motor Power 22 + 2 + 1.5 kW Weight 27,500 kg

Condition: new, Year of construction: 2024, punching force: 115 t, power: 11 kW (14.96 HP), PLACE OF PRODUCTION : TURKEY WARRANTY PERIOD : 12 MONTHS DELIVERY DATE : YOUR QUESTION DELIVERY METHOD : EXW BURSA/TURKEY STANDARD FEATURES : - 12 separate hydraulic pistons and 2 separate foot controls for two people to work at the same time - 2Adjustable piston stroke distance for faster work - 3Central lubrication system - 4Backrest with electric switch - 5Working lamp - 65 separate workstations on the same body: 6.1 - Ø26 mm punch and matrix and standard drilling tools 6.2 - Full round and full square material cutting knife set 6.3 - Angle cutting knife set 6.4 - Blade and sheet metal cutting knives 6.5 - U-notching knife set TECHNICAL SPECIFICATIONS : Drilling force115 t Bwshxyhlevfynmsbsl Extension355 mm Stroke80 mm Strokes per min. (with 20 mm stroke)25Sheet thickness (max.))Ø 34 x 26 mm Working height935 mm Cutting capacity600 x 15 mm380 x 25 mm Steel angle 45° (1 foot)80 x 80 x 10 mmSteel angle 90°150 x 150 x 150 x 16 mm Blade length610 mmRound55 mmSquare50 mm Material thickness13 mm Width2,040 mmDepth950 mm Engine power11.0 Kw Mains voltage400 V50 Hz Height2,180 mm Weight2,920 kg