- Security light barriers
- 17 cartridges and die carrier
- 2 sheet clamps
- Full rotation of all tools
- NC-controlled, maintenance free three phase current drive
- automatic repositioning
- compensation of tool length variation
- part removal chute (500mm x 500mm) with 2 containers
- Good part box
- punching slug suction system
- Programmable spray tool lubrication with 2 containers
- Programmable stripper
- adaptive stroke-length control
- network connection RJ ...
Control system: Pentium
Maximum force (pressing): 30 t
Table length (X): 2520 mm
Table width (Y): 1900 mm
Maximum travel length X-axis: 1250 mm
Maximum travel length Y-axis: 1000 mm
Head stroke: 60 mm
Total power demand: 4 kW
Machine weight: 3850 kg
x-travel 450 mm
y-travel 400 mm
z-travel 320 mm
table load capacity - central/maximum 400 kg
tool adaptor SK40
tool adaptor 14 Stück
weight of the machine ca. 1,9 t
punching force 170 kN
sheet size 2.500 mm x 1.25 mm without resetting
wear resistant brush table 2.500 mm x 1.250 mm
max. sheet thickness 8 mm
max. punch diameter 89 mm
tool turret with 20 stations
18 Stationary tool holders
2+4 auto index tool holders
1 Multitool MT 24-8
Separate control panel next to the door
TwinCat drive control with IndraDrive
operation on Touch Screen Monitor
TulusLite user interface
Sheet metal housing with integrated safety device
Cutting force: 230 kN
Max. cutting diameter: 89 mm
Maximum material thickness: 8 mm
Maximum dimensions of machined material:
- x: 2530mm
- y: 1270mm
Starting in axes:
- x: 2584mm
- y: 1317mm
Max. pressure: 300 bar
Machine dimensions: 5,4mx5,6mx2,5m
Machine weight: 13 500 kg
K 1.7.2018: 31832 hours under the throat.
Machine in good technical condition, fully functional.
Maximum force (pressing): 20 t
Maximum thickness of the sheet metal: 6 mm
Maximum travel length X-axis: 2500 mm
Maximum travel length Y-axis: 1250 mm
Maximum table load (evenly distributed): 120 kg
Maximum punching speed (number of impacts per minute): 1100 1/min
Maximum marking speed (number of impacts per minute): 2800 1/min
Maximum stroke of the upper tool: 40 mm
Maximum feed rate in X-axis: 100 m/min
Maximum feed rate in Y-axis: 75 m/min
Accuracy of programming: -0.1 mm
Large format sheet metal working center/CNC punching nipple machine
Only about 19,800 operating hours!
With function forming and turning
Manufacturer: FINN POWER (now Prima Power)
Model: F6-25 SB V
Control: Siemens Sinumerik 840 D
Year of construction: 2000
Punching force: 300 kN
Max. material thickness: 8 mm
Number of tool stations: 20 pieces
Tooling system: Thick Turret
Max. tool diameter: 89 mm
Sheet size: Large format 3,000 x 1,500 mm
small parts flap, max. part size:200...
Maximum force (pressing): 300 kN
Working range without position: 1 270 x 2 080 mm
Working range with position: 1 250 x 3 000 mm
Reposition in X axis allows to process sheet metal up to dimension 3 000 x 1 250 mm. Maximum weight of sheet metal is 95 kg. 120 kg when moving only the X axis.
Maximum material thickness (sheet metal): 6.3 mm
Maximum weight of material (sheet metal): 49 kg
Maximum material thickness (flat bar): 10 mm
Maximum weight of material (flat bar): 100 kg
please only inquiries from Germany Postcode area: 2,3,4,5!
A new reinforced and even more massive frame, double motor in the Y-axis
Volume + 30% - Velocity + 30% - Acceleration +50
With the new punching machine STX Plus the C-frame block has been enlarged in width and height. This means that in future punching work will be even more stable and precise.
- later converted to a pincer machine
- can be used as slinging machine 3000/650 mm
- can be used as tong machine 1500/625 mm with 25 tons punching power - - the machine is optically and technically in a very good condition
- with standard accessories
- with programming instructions and circuit diagram
- incl. tool set and tool setting device
- Trumpf tool holder size 3:
- Punch needle: 2 x 3.0, 1 x 6.0/8.2/10 mm
- oblong punch: 2x 2.5x38, 1x 22.3x57.3 mm
- oblong die: 2 x...
Max. Cutting force 220 kN
connected load 29 kVA
Compressed air connection 7-14 bar
working area X+Y without setting back 2500 x 1250 mm
traversing range X -50 - +2550 mm
traversing range Y -7 - 1280 mm
max. sheet thickness 8 mm
active downholder power programmable in steps 4,5-20 kN
Max. Workpiece weight 200 kg
max. speed X-Axis 100 m/min
max. speed Y-axis 60 m/min
max. speed C-axis 330 rpm
simultaneous X+Y m/min
stroke sequence punching E-1 1200 1/min
stroke sequence signing 2800 1/min
Punch capacity: 20 Ton
Sheet thickness: 6,4 mm steel
Punching area: 2.500 x 1.500 mm
Punch. area with repositioning: 5.000 x 1.500 mm
X-axis travel: 2.552 mm
Y-axis travel: 1.550 mm
Positioning speed: 50 m/min.
Sheet clamps: 3 pcs.
Punch station: 20 positions, incl. 4 auto index stations
Auto index stations: 0° - 360° x 0.01° incr. punch upto Ø 88,9 mm
CNC control: LVD MNC 32000
- Large variety of tooling
- Safety light guard
- Vibration absorbers
- Documentation & M...
Boschert Combicut TWIN 1500 x 3000 CNC Z Rota Index Revo
TRUMPF quick tool change system
Plasma cutting head with Kjellberg 160i plasma source
punching force: 2x 280 kN (28 tons)
+ Suhner thread cutting and drilling head - M16
Travel: x- 3000 mm (repositioning up to 9999 mm)
y- 1550 mm
punching arm throat: 1850 mm
Tool system Trumpf Gr1-3(105mm)
Head 1 punching rotation (Trumpf system up to tool size 3) with
head 2 punching machines Revotool/Trumpf syste...
Boschert Combicut EL 1250 x 2500 CNC Z Rota IndexQuick tool change system TRUMPFPlasma cutting head with generally overhauled Kjellberg 160i Plasma sourcePunching force: 280 kN (28 tons)Traverse x- 2500 mm (repositioning up to 9999 mm) y- 1250 mmPunching arm unloading:1650 mmTool system Trumpf Gr1-3(105mm)Head 1 Rotation (up to tool size 3)) with Revotool Indexable Head 2 Plasma cutting control Labod 32060 Graphics control / workshop programmable incl. external programming workstation Metalix Ma...
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.