Used Hsc 20 Linear for sale (30,507)

Condition: good (used), Year of construction: 2009, Universal machining center Machine type: DMG HSC 20 Linear Control: Heidenhain iTNC 530 Year: 2009 SPECIFICATIONS Travel X-Axis: 200 mm Y-Axis: 220 mm Z-Axis: 280 mm A-Axes: ,001 °) C-Axis: 360° - 0,001° Amount of controlled axes: 5 Spindle speeds: 42.000 rpm Tool: HSK-E32 Toolchanger Tool capacity: 32 NC-panning and rotary Table Gbedpfx Ahoz Rpc Ee Eew Table size: Ø 200 mm Max. Table Load: 15 kg speed of table: 150 1/min mm/min Equipment Internal cooling: 40 bar Auto. Power Off Automatisierung LM100 (EROWA ITS72, 5 Ebenen mit 9 Positionen); 10 kg maximale Handhabung Electronical handwheel Chip conveyor Caliper

Condition: like new (used), Year of construction: 2009, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, controller manufacturer: HEIDENHAIN iTNC530, workpiece weight (max.): 15 kg, table width: 200 mm, table length: 200 mm, spindle speed (min.): 42,000 rpm, Control CNC: HEIDENHAIN iTNC530 Axes X-axis travel mm: 200 Y-axis travel mm: 220 Z-axis travel mm: 280 C-axis degrees: 360º A-axis degrees: -15º max.130º Work Table Table dimensions mm: ø200 Maximum workpiece weight kg: 15 Spindle Spindle speed rpm: 42.000 Cooling Cooling through the spindle bar: 40 Tool System Tool holder: HSK-E32 Tool magazine slots: 60 Max. tool diameter mm: ø50 Max. tool length mm: 200 Chip-to-chip time s: 10 Equipment Automation LM100 (EROWA ITS72, 5 levels of 9 positions); 10 kg maximum manipulation Electronic handwheel Chip conveyor Infrared probe High-pressure pump NC rotary tilting table Rated power kVA: 40 Gjdsxpg H Hepfx Ah Esbw

Condition: good (used), Year of construction: 2008, operating hours: 7,360 h, functionality: fully functional, machine/vehicle number: 11790000557, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 280 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, spindle speed (max.): 42,000 rpm, DMG SAUER ULTRASONIC 20 Linear – 5-Axis CNC Machining Centre - Year: 2008 - Serial Number: 1179 000 0557 - CNC Control: Siemens SINUMERIK 840D Powerline - Number of Axes: 5 - Linear Drive Technology - Ultrasonic-Assisted Machining Technology - Made in Germany Working range - X-Axis Travel: 200 mm - Y-Axis Travel: 200 mm - Z-Axis Travel: 280 mm - A-Axis Swivel Range: approximately −5° to +130° - C-Axis Rotation: 360° - Rotary Table Diameter: approximately 190 mm - Maximum Table Load: approximately 10 kg - Rapid Traverse X/Y/Z: up to 40 m/min Spindle and tooling Gjds Aivw Ajpfx Ah Eobw - Maximum Spindle Speed: 42,000 rpm - Tool Holder: HSK-E32 - Ultrasonic Frequency: up to 30 kHz - Automatic Tool Changer: 24 positions - High-Pressure Through-Spindle Coolant - Ultrasonic and conventional HSC milling capability Equipment - Integrated A/C Swivel Rotary Table - Chillers and Cooling Units - Hydraulic Unit - Coolant Filtration System - Spindle and Linear-Drive Cooling - Manuals - Additional Machine Parts - Electrical Cabinet Cooling Electrical and dimensions - Electrical Supply: 230 V / 50–60 Hz - Approx. Main Machine Dimensions: 2,184 × 1,981 × 2,108 mm - Approx. Main Machine Weight: 3,800 kg - Approx. Total Shipment Weight with Auxiliary Units: 4,500 kg - Shipment: 7 packages Suitable applications Designed for high-precision machining of: - Ceramics - Glass and glass-ceramics - Carbide - Sapphire - Corundum - Silicon - Composite materials - Dental and medical components - Optical and precision components - Mould and tool manufacturing

Condition: like new (used), Year of construction: 2015, operating hours: 1,000 h, functionality: fully functional, Equipment: documentation/manual, DMG MORI / SAUER GmbH ULTRASONIC 20 Machine Data Control system Heidenhain Axes 5 (X / Y / Z / A / C) Travel ranges X / Y / Z 200 / 200 / 280 mm Spindle speed max. 42,000 rpm Tool holder HSK-E32 Tool magazine 24 Rotary table Ø 190 mm Table load capacity, center 10 kg A-axis -5° / +130° C-axis 360° Rapid traverse 40 m/min Footprint L × W × H 2,020 × 2,196 × 2,385 mm Fuse rating 63 A Feed drive X / Y / Z Synchronous linear motors Feed rate max. 40,000 mm/min Input resolution 0.001 mm C-axis speed max. 150 rpm Table clamping Pneumatic / mechanical Tool length max., from spindle nose 200 mm Tool diameter max., automatic tool changer 40 mm Compressed air supply 6–10 bar Air consumption without tool blowing 12 m³/h Additional consumption with continuous tool blowing 25 m³/h Gbjdpfxjz Tc Tvs Ah Ejw Connection, weight, and dimensions Electrical connection 400 V / 50–60 Hz Machine weight 3,900 kg Tool weight max., automatic tool changer 1 kg Total weight of magazine tools max. 24 kg Compressed air connection min. Ø 12 mm Equipment and scope of supply 15 tool holders and other related accessories as shown in the offer photos are included. Technical data is subject to change without notice. Errors and prior sale are reserved. The specifications and scope of supply agreed upon in the purchase contract shall be the basis.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1.302.981, overall weight: 280 kg, load capacity: 20 kg, arm reach: 1,813 mm, controller model: KR C4 NA UL, No minimum price – guaranteed sale to the highest bidder! The offer includes only the robot without the enclosure! The enclosure can be purchased separately for an additional €3,500! TECHNICAL DETAILS Payload: 20 kg Reach: 1,813 mm MACHINE DETAILS Controller: KR C4 NA UL Total weight: 280 kg Operating hours: approx. 500 hours EQUIPMENT Teach pendant (manual control) Safety enclosure with Siemens PLC 2 × SICK laser scanners 4 × Light curtains Gedj Aiu Tyspfx Ah Eobw

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Touch Probe BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Air Blast through spindle Gbjdpfx Ahjw Hxiws Esw Super Fine filter system c/w tooling ----- Clearance Sales -----

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: E 3907, turning length: 200 mm, spindle speed (max.): 10,000 rpm, overall weight: 2,300 kg, type of input current: three-phase, controller model: Mitsubishi Meldas, counter spindle speed (max.): 8,000 rpm, Long-turning lathe with FMB bar feeder! TECHNICAL DETAILS Turning diameter over bed: 20 mm Spindle bore: 24 mm Turning length: 200 mm Spindle speed: 20–10,000 rpm C-axis resolution: 0.001° Gbedpfs Ah Du Hsx Ah Esw Counter spindle / pick-off station Pick-off diameter: 20 mm Turning length: 80/600 mm Spindle speed: 200–8,000 rpm C-axis resolution: 0.001° Rapid traverse rates X/Y/Z: 32 m/min MACHINE DETAILS Control system: Mitsubishi Meldas Collet size: F25 (145E) Guide bushing: Neukomm T223 (22.001) Swivel angle of the tool block: 90° Driven tool positions: 3 Number of axes: 5 + 2 C-axes Total power requirement: 2.2/3.7 kW Dimensions & Weight Footprint: approx. 2.4 × 1.1 × 1.8 m plus loading magazine Machine weight: approx. 2.3 t EQUIPMENT CNC control system FMB 3-26 loading magazine Swiveling tool block with driven tools for radial and tangential machining Guide bushing by Neukomm Documentation On-board tools

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: AA2/002546, functionality: fully functional, travel distance X-axis: 7,033 mm, travel distance Y-axis: 1,940 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of milling spindles: 1 Number of controlled axes: 5 Spindle speed: max. 8,000 rpm Main motor power: 11 kW C-axis: Available Tool holder: HSK-F63 Gbsdpo Aidx Hsfx Ah Eow Table design: Cantilever table Table length: 5,200 mm Table width: 1,300 mm Working area X-axis: 6,350 mm Working area Y-axis: 1,300 mm Working area Z-axis: 200 mm Travel range X-axis: max. 7,033 mm Travel range Y-axis: max. 1,940 mm Travel range Z-axis: max. 475 mm Drilling tool: Available Motor power: 3 kW Horizontal drilling spindles: 6 Vertical drilling spindles: 10 Tool changer positions: 24 MACHINE DETAILS Vacuum pump: Becker VTLF 250 Year of manufacture: 2008 Main motor power: 5.5 kW Capacity: 300 m³/h Connection diameter: 70 mm Oil-free: Yes Voltage: 400 V Current consumption: 64 A Dimensions & Weight Dimensions (L x W x H): 10,300 x 2,450 x 2,800 mm Installed length: 11,000 mm Installed width: 3,900 mm Installed height: 3,000 mm Transport weight: 6,600 kg Transport packages: 1 EQUIPMENT Tools CE marking

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 20 mm, spindle motor power: 5,500 W, spindle speed (max.): 8,000 rpm, spindle bore: 25 mm, travel distance X-axis: 50 mm, travel distance Y-axis: 350 mm, type of input current: three-phase, bar passage: 20 mm, overall weight: 4,200 kg, spindle diameter: 20 mm, Equipment: documentation/manual, rotational speed infinitely variable, Steuerung: Fanuc 310i Hauptspindel Drehzahl: 10.000 U/min Leistung: 5,5 kW Drehmoment: 14 Nm Stangendurchlass: max. 20 mm C1-Achse: 0,001 Verfahrweg Z1-Achse: 80 mm Gegenspindel Bjjgsn8yaky Drehzahl: 10.000 U/min Leistung: 5,5 kW Drehmoment: 14 Nm C2-Achse: 0,001 Verfahrwege X2 / Z2-Achse: 240 / 300 mm Eilgang in X2 / Z2 Achse: 40 m/min Werkzeugträger I (X/Y) Technologie: Linearer Schlitten Innenbearbeitung: 6 Stationen Werkzeughalter: 20 mm Außenbearbeitung: 6 Stationen Werkzeughalter: 12 x 12 mm Angetriebene Werkzeugstationen: 5 Werkzeugantrieb: 3.450 / 6.000 U/min Werkzeugaufnahme: Spannzangenfutter, ESX 16 Verfahrwege in X/Y-Achse: 50/350 mm Eilgang in der X/Y-Achse: 40/30 m/min Stangenlader BOSS 332 E Gjdpfx Aozz I Dkjh Eobw Werkzeugträger II (Y) Technologie: Linearer Schlitten Innenbearbeitung: 4 Stationen Werkzeugaufnahme: 20 mm Außenbearbeitung: 4 Stationen Werkzeughalter: 12 x 12 mm Angetriebene Werkzeugstationen: 5 Werkzeugantrieb: 3.450 / 6.000 U/min Werkzeugaufnahme: Spannzange, ESX 16 Verfahrweg in Y2-Achse: 120 mm Eilgang in der Y2-Achse: 40 m/min DETAILS ZUR MASCHINE Gewicht: 4200 kg Angeschlossene Last: 30 kVA Betriebsspannung: 400 V / 50 Hz AUSRÜSTUNG Spänemanagement: Späneförderer Kühlmittelmanagement: Kühlmittelpumpe Weitere Ausstattung: Signallamp

Condition: excellent (used), Year of construction: 2011, DMG MORI HSC 55 linear Operating hours: 18,600 h Gjdpfxe Agp S Ue Ah Eobw spindle hours since replacement max. 1000 h NEW SPINDLE Control: Heidenhain iTNC530 Travel: X-450 mm, Y-600 mm, Z-400 mm A-axis: C-axis: 360 A-/C-axis speed: 110 U/min Express travel X/Y/Z: 80 m/min clamping surface: 400 x 400 mm max. table load: 200 kg Spindle speed: 20 - 28,000 RPM tool holder: HSK-A63 tool magazine: 120 seats Tool measurement: BLUM Laser probe: Yes Chip conveyor and internal coolant lubricant supply (IKZ): 40 bar

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning length: 508 mm, turning diameter: 330 mm, spindle speed (max.): 3,400 rpm, center width: 610 mm, TECHNICAL DETAILS Swing diameter: 330 mm Turning length: 508 mm Swing diameter over bed: 585 mm Swing diameter over cross slide: 241 mm Spindle speed: 3,400 rpm Bar diameter: 63 mm Distance between centers: 610 mm Travel in X-axis: 214.6 mm Travel in Z-axis: 508 mm Tool holder: VDI 40 MACHINE DETAILS Total power requirement: 15 kW Dimensions & Weight Gbodpfx Aj Ah H Itjh Ejw Dimensions: 2,800 × 1,800 × 1,800 mm Machine weight: approx. 4,100 kg EQUIPMENT Bar feeder Servo Bar 300, 1.5 m 3-jaw chuck Collet chuck Tailstock Various tool holders

Condition: used, Year of construction: 2008, Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, C-axis rotation range: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, power-on hours: 56612h, spindle operating hours: 21206h. The machine is located in the United Kingdom. Inspection possible by appointment. Godpjz R Uw Asfx Ah Eebw

Year of construction: 2006, condition: ready for operation (used), A DMG Mori 3-axis precision milling machine is available. Travel X/Y/Z: 200mm/200mm/190mm, speed: 40000rpm, feed: 30m/min, accuracy: 0.001mm. Machine dimensions X/Y/Z: approx. 1800mm/1550mm/1850mm, weight: approx. 2200kg, control: Siemens 840D, operating hours: 4979h, spindle hours: 1041h. The spindle was completely overhauled in 2023. An on-site inspection is possible. Gbjdevi N D Sspfx Ah Eew

Condition: used, Year of construction: 1996, machine/vehicle number: B 205, overall weight: 2,600 kg, tank capacity: 250 l, No minimum price – guaranteed sale to the highest bidder! Gjdj Akchiopfx Ah Eobw TECHNICAL DETAILS Dryer Type: continuous paddle dryer (flash dryer) Gross volume: approx. 250 l Trough diameter: 400 mm Inlet diameter: 100 mm Outlet: approx. 190 x 100 mm MACHINE DETAILS Drive Motor power: 15 kW Voltage: 380 V Dimensions and weight Space required: 3.8 x 1.7 m Overall height: 1.5 m Weight: 2,600 kg EQUIPMENT Double jacket Mounted on a frame

Year of construction: 2008, condition: used, overall weight: 120 kg, machine/vehicle number: 080137, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Temperature control unit Heating medium: Water Heating capacity: 27 kW Gedpfxe Akb S Ue Ah Eobw Electrical connection: 29 kVA Temperature: 90 °C MACHINE DETAILS Pump Motor power: 0.9 kW Voltage: 400 V Dimensions and weight Footprint: 1.1 x 0.4 m Overall height: 0.9 m Weight: 120 kg FEATURES Temperature controller Switch Mobile

Condition: used, machine/vehicle number: 76271002, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working area Gsdpfx Ahs Aa A Dyj Eobw Sheet width: 2,040 mm Sheet thickness: 1.2 mm Performance data Total power requirement: 2.5 kW Machine weight: approx. 2.0 t Dimensions Space required: approx. 3.0 × 1.6 × 1.7 m EQUIPMENT No information available regarding accessories.

Year of construction: 1969, condition: used, machine/vehicle number: 1054, General SKU: 213M066 Manufacturer: Brogli + Cie Basel Type: Multi Homo MH-20 C No.: 1054 Year of manufacture: 1969 Location: Barneveld Pressure Vacuum possible: ✔ Main features Material: Stainless steel Capacity: 20 Specified features - process vessel Closed stirred tank: "Vacuum processing vessel" (1x) Capacity: 20 liters (useful) Vessel dimensions: dia. 340x250mm, vessel mounted on wheels With lid: ✔ Outlet: dia. 20mm With double jacket: (with electric heating, 4000 Watt) With anchor stirrer: "scraper stirrer" With homogenizer: ✔ Material: Stainless steel 1.4404 (316L) With double jacket: ✔ General With switch: ✔ Footprint: 1.4x0.7 m Overall height: 1.4 m Weight: 380 kg Additional information Additional specifications: Vessel mounted on wheels Gbjdpfj Akbw Djx Ah Eew What you can expect from Foeth: all our machines are in working condition and offered at a reduced price compared to new machines. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: used, Year of construction: 1987, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: Universal surface grinder Year of Construction: 1987 Machine Weight: approx. 1.5 t Working Area Grinding Length: 520 mm Grinding Width: 160 mm Workpiece Height: 300 mm Clamping System Gbodpe Acg D Nofx Ah Ejw Electromagnetic clamping table: 520 × 160 mm Grinding Wheel Wheel Diameter: 230 mm Dimensions Length: approx. 1.5 m Width: approx. 1.8 m Height: approx. 1.6 m EQUIPMENT Rapid traverse in the Z-axis Hydraulic table drive External control cabinet Oil cooling for improved dimensional accuracy Coolant system

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol M+, spindle speed (max.): 7,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,660 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Gbjdj Ah H Ihspfx Ah Esw Table dimensions: 2,000 × 510 mm Table load capacity: max. 1,000 kg Spindle speed: 7,000 rpm Tool holder: SK 40 Tool magazine: 48 tool positions MACHINE DETAILS CNC control: Mazatrol M+ Machine weight: approx. 7,500 kg EQUIPMENT Chip conveyor: MAYFRAN 4th axis with rotary indexing table: Rotamatik RM 100

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, load capacity: 2,000 kg, lifting height: 4,750 mm, fork length: 1,200 mm, overall weight: 4,000 kg, No minimum price – guaranteed sale to the highest bidder! Gedps Ai Sh Tofx Ah Esbw Submitting a bid obligates you to collect the item within the specified timeframe, between December 8, 2026, and December 12, 2026! TECHNICAL DETAILS Rated load capacity: 2,000 kg Lifting height: up to 4,750 mm Fork length: up to 1,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 1,200 x 2,100 mm Machine weight: 4,000 kg EQUIPMENT Fork extensions: 2,000 mm External Reference: Steinbach & Holler - Lot 48

Condition: good (used), Year of construction: 2013, functionality: fully functional, Fanuc control system, tool extraction spindle, powered tools, Gbodpjzz H Dvjfx Ah Esw tool magazine.

Condition: used, Year of construction: 2013, turning diameter max. 20 mm turning length max. 80 mm control Fanuc 310is max. usable bar diameter 20 (25) mm inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C1: 360 ° inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C2: 360 ° x-axis 1: 50 / 2: 240 mm y-axis 1: 350 / 2: 120 mm z-axis 1: 80 / 2: 300 mm number of toolpositions 17 pos. inner processing 6 pos. outer processing 6 pos. driven statition 5 pos. Shank diameter 20 mm shaft cross cut 12 x 12 mm collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0.98 kW max. Torque 3x 4 / 2x 2,3 Nm number of toolpositions 13 pos. inner processing 4 Gbode Ahkfyjpfx Ah Eow outer processing 4 driven statition 5 pos Shank diameter 20 mm shaft cross cut 12 x 12 collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0,98 kW max. Torque 3x 4 / 2x 2,3 Nm rapid traverse ( X / Y / Z ) max. 40 m/min feed power max. 2,5 kN Accelaration max. 5 m/s² total power requirement 56 kVA weight of the machine ca. 4,8 t dimensions of the machine ca. 8,0 x 2,5 x 2,0 m CNC-Short-Lathe GILDEMEISTER - Sprint 20-8 - 8 Achsen ( 2x X / 2x Y / 2x Z / 2x C ) - Main- and Subspindle - Bar-Feeding-Magazine FMB turbo 3-36/ 3200A - Coolant System DELTATHERM

Condition: used, machine/vehicle number: 516223V00900, Year of construction: 2019, operating hours: 4,777 h, load capacity: 1,800 kg, lifting height: 4,500 mm, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 4,500 mm MACHINE DETAILS Mast design: Triplex mast with full free lift Drive type: Electric Battery year of manufacture: 2019 Battery voltage: 48 V Battery capacity: 625 Ah Measured idle voltage: 50.83 V Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,150 x 2,060 mm Own weight: 3,400 kg Service valid until: 10/2027 UVV inspection valid until: 10/2027 Operating hours: 4,777 h EQUIPMENT Former Still full-service unit Battery charger Fork positioner with side shift Side fall protection LED work light at the rear Orange warning light Comfort seat with lumbar support Seat heating Hydraulic valves: 3rd and 4th valve Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Gbedpfx Ahs Ahrcao Eew Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not done on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 219

Condition: used, machine/vehicle number: H2X392V01704, Year of construction: 2019, operating hours: 7,035 h, load capacity: 2,000 kg, lifting height: 4,250 mm, mast type: duplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,250 mm Load capacity: 2,000 kg Fork length: 1,200 mm MACHINE DETAILS Mast type: Duplex mast Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 4,100 x 1,200 x 2,777 mm Own weight: 3,740 kg Next service due in: 878 hours UVV certificate valid until: 03/2027 Operating hours: 7,035 hours EQUIPMENT Full cabin Heater Windshield wiper Road traffic lighting with turn signals LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat Lumbar support Seat heating Former Linde full-service unit Side shifter 3rd hydraulic valve: Available 4th additional hydraulic valve: Available, free for fork positioner All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Gbedj Ahraqopfx Ah Esw Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 216

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 460 mm, controller model: HEIDENHAIN ITNC 530, spindle speed (max.): 28,000 rpm, TECHNICAL DETAILS Number of axes: 5 Travel range, X-axis: 450 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 460 mm Swivel angle (A-axis): -10 / +110 ° Tool magazine Number of positions: 60 Maximum tool diameter: 80 mm Maximum tool length: 250 mm Maximum tool weight: 6 kg Tool holder and spindle Gsdpfozaqhqox Ah Ejbw Tool holder: HSK 63 Minimum spindle speed: 2 rpm Maximum spindle speed: 28,000 rpm MACHINE DETAILS Operating time according to counter: 94,552 h Operating hours according to counter: 24,219 h Connection voltage: 400 V Spindle power: 38 / 28 kW Total power consumption: 70 kVA Dimensions & Weight Dimensions (L x W x H): 3,210 x 2,930 x 2,900 mm Machine weight: approx. 9,500 kg