Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, Punching force 500 kN Max. Punching capacity Ø 27 in 13 mm throat depth 130 mm Motor power 3.0 kW Stroke rate with 20 mm stroke 25/min Maximum stroke 30 mm Lodsy T N Uqopfx Ac Ieab Weight 295 kg

Condition: new, Year of construction: 2024, The machine is equipped with 5 workstations: • Punching station • Flat steel shear • Angle steel shear • Notching station • Bar steel shear (round and square) Technical Data Strokes per minute at 20 mm stroke: 37 /min Throat depth: 500 mm Punching force: 550 kN Hole diameter and thickness up to max.: 40×10 mm or 20x20 mm Flat steel up to max.: 300×15 or 200×20 mm Angle steel 90° up to max.: 130x130x13 mm Angle steel 45° up to max.: 70x70x7 mm Bar steel up to max.: 40 mm Square steel up to max.: 40 mm Laodjy T N Ukjpfx Ac Ijb Notching up to max.: 10 mm

Condition: as good as new (ex-display), Year of construction: 2026, Strokes per minute with 15 mm stroke 34 /min. Punching force 500 kN Hole diameter and thickness up to max. 27x13 or 20x18 mm Flat steel (2 inclinations) up to max. 350x10 mm Flat steel (5 inclination) up to max. 350x15 mm 90 degree angle steel up to max. 80x80x8 mm Bar steel up to max. 35 mm Square steel up to max. 30 mm Notching up to max. 10 mm Lsdpoy T N Udofx Ac Isab Bending capacity: Fixture up to max. 100x10 mm Motor power 3.0 kW Net weight 950 kg Gross weight 1150 kg

Condition: as good as new (ex-display), Year of construction: 2024, Technical data Laodpjy T N T Tjfx Ac Ijb Strokes per minute with 15 mm stroke: 24 /min Punching force: 450 kN Motor power: 2.2 kW Hole diameter and thickness up to max.: 27×13 mm Flat steel up to max.: 300 x10/ 200×13 mm Angle steel 90 degrees up to max.: 80x80x8 mm Angled steel 45 degrees up to max.: 60x60x6 mm Notching up to max.: 7 mm Machine weight: 760 kg

Condition: as good as new (ex-display), Year of construction: 2026, Incl. control for entering the bending angle. Strokes per minute with 15 mm stroke 34 /min. Punching force 500 kN Hole diameter and thickness up to max. 27x13 or 20x18 mm Flat steel (2 inclinations) up to max. 350x10 mm Flat steel (5 inclination) up to max. 350x15 mm 90 degree angle steel up to max. 80x80x8 mm Bar steel up to max. 35 mm Square steel up to max. 30 mm Lsdpfoy T N T Hex Ac Isab Notching up to max. 10 mm Bending capacity: Fixture up to max. 100x10 mm Motor power 3.0 kW Net weight 950 kg Gross weight 1150 kg

Condition: new, Year of construction: 2026, The machine has 5 workstations: • Punching station • Flat bar shear • Angle bar shear Ljdpfx Asy T N Tyjc Ijab • Notching station • Bar steel shear (round and square) Technical data Strokes per minute with 20 mm stroke: 40 /min Throat depth 500 mm Punching force 800 kN Hole diameter and thickness up to max. 40×14 mm Flat steel up to max. 450×15 or 300×20 mm Angle steel 90 degrees up to max. 152x152x13 mm Angle steel 45 degrees up to max. 70x70x7 mm Bar steel up to max. 45 mm Square steel up to max. 45 mm Notching up to max. 12 mm

Condition: new, Year of construction: 2026, functionality: fully functional, ALMI AL-U for zinc spout in pipes with outer diameter from Ø22 to Ø76 mm Pipe notch for zinc spout in pipes with outside diameters diameter from Ø22 to Ø76 mm for cutting out vent slots from round and rectangular metal pipes from rectangular metal pipes from 22 mm outer diameter Easy to attach to the wall Wall thickness max. 3 mm steel, 2.5 mm VA, weight 7 kg Ljdpfxey T N S Ae Ac Ieab

Condition: new, Year of construction: 2026, functionality: fully functional, ALMI pipe notcher AL2 for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Pipe notcher for pipes with outer diameter Lodpfx Acey T N Sve Ijab Ø48.3 (1 1/2″) and Ø60.3 (2") mm Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 15 kg

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL1 for pipes with an outer diameter of Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Pipe notcher for pipes with outer diameter Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 8 kg Laodpjy T N Spefx Ac Ijb

Condition: ready for operation (used), Year of construction: 2011, Offered is a tube laser cutting machine. Processing length X: 6500mm, workpiece diameter max.: 220mm, laser power: 3500W, beam source: CO2, power-on hours: 48817h, laser beam hours: 9403h, RF tube: renewed 01/2023. Equipped with bundle loader, unloading station, extraction system, cooling unit, annual manufacturer maintenance documented. Weight: approx. 9000kg, overall dimensions X/Y/Z: approx. 10500mm/4600mm/2200mm. Inspection possible by arrangement. Ljdsy T N Htopfx Ac Ijab

Condition: good (used), Year of construction: 1994, functionality: unexamined, We are offering a press brake from the manufacturer LVD for sale. Technical specifications: Laodpfx Asy T N A Usc Isb - Working length 3000 mm - Press force 135 tons - Weight 7.7 tons A large number of tools are included with the machine.

Condition: excellent (used), Year of construction: 2010, Technical data: Working width: 6500 mm Maximum bending capacity: 10.0 mm Maximum bending angle: 7.0 mm CNC control Diameter of upper roller: 420 mm Diameter of side rollers: 315 mm Diameter of central lower roller: 400 mm Conical bending unit by angling the two side rollers Mobile control panel with digital display Hydraulic folding supports CE marking Motor power: 22 kW Dimensions (length x width x height): approx. 9200 x 2350 x 1900 mm Weight: approx. 39 tons Optional equipment: Side bending aid Swiveling bending aid on top Condition: Very good condition, little used Operating hours: 100 hours The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty. Lsdpsx Iitijfx Ac Ioab

Condition: ready for operation (used), ERCOLINA TOPBENDER with 2-axis positioning system / 3 meters -CE marking -Pipe capacity 60mm -Bending radius R10-R300 -Bending angle 0-180 degrees -Motor power 1.5 KW -Bending speed 1.25-1.5 revolutions/min -Includes 2-axis positioning system / 3 meters Lodpfx Aey T Namec Isab -2 sets of tooling with sliding shoe R100-1-1/4 & R67-25mm -Foot switch -Documentation Dimensions: L x W x H (base machine) 0.7 x 0.9 x 1.4 meters / Total weight 220 kg Errors and omissions excepted.

Condition: ready for operation (used), Notching machine, COMACA Type 130/3mm -CE marking -Well-maintained original condition Lajdpfx Ajy T I Ngsc Iob -Cutting angle 90 degrees -Work table 600x460mm -Cutting capacity 130mm -Cutting capacity 3mm / sheet thickness -Stroke rate 50-60 strokes per minute -Work table with T-slots/scale/adjustable angle stops -Foot pedal -Safety device Dimensions: L x W x H 0.7 x 0.7 x 1.3 meters / Weight 250 kg Errors and omissions excepted.

Condition: excellent (used), You are bidding on: a high-quality plate shear and bending brake from a very good and well-known manufacturer – Schechtl. Features of the machine: Plate shear HT 200 Capacity: 1.25mm steel, aluminum, etc. Cutting length: slightly over 2m (blade in top condition, see photos; original lettering still present, which may fade after frequent cutting) Back gauge Light bar with LED for cut line illumination Adjustable front support Bending brake KS – Capacity: 1mm steel, aluminum, up to approx. 1.5mm Bending length: slightly over 2m Foot pedal Optional: back gauge or beading tool Attachment rail Round dies and other dies According to §25a UStG The machines are in good used condition and are ready for immediate use; they come from a private collection. Laedpfsy T H Nxox Ac Isb Important! Optionally, you can find and purchase many machines and machine accessories in our shop, such as various dies, back gauges – everything related to sheet metal and steel processing, including bending brakes, plate shears, drilling machines, slitting and profiling machines, accessories (beading equipment, round dies for gutter production, back stops, etc.), and other hand tools and spare parts from many top manufacturers. I am always available to answer your questions. You will receive an invoice according to §25a UStG, which includes the value-added tax – differential taxation. Free loading is possible – weight approx. 750 kg and 650 kg. Inspection and testing are possible and recommended after scheduling an appointment by phone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Bending brake KS 260504 & HT 260505

Condition: good (used), Year of construction: 1996, control type: NC control, Tube diameter: 4-28 mm Wall thickness: / mm Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Lsdpfx Aoy T H I Ijc Ijab Delivery rate: 4.5 l/min Max. bending angle +/-: 190° Nominal pressure: 250 bar Operating pressure: 3095 bar Delivery rate: 4.5 l/min Total power requirement: 1.5 kW Drive: Hydraulic cylinder and roller chain

Condition: good (used), Year of construction: 1987, Press force 1250 t Bending length 15000 mm Upright spacing 10160 mm Control system CNC 10 graphics Throat depth 770 mm Table length 15000 mm Machine weight approx. 230 t Required space approx. 17000 x 5400 x 5900 mm Additional information: - Press force: 1,250 t - Bending length: 15,000 mm - Control: CNC 10 graphics - Number of controlled axes: at least 10 - Upright spacing: 10,160 mm - Throat depth: 770 mm - Table length: 15,000 mm - Dimensions: 17,000 mm x 5,400 mm x 5,900 mm - Weight: approx. 170 t Ljdpfey T H Hdjx Ac Ioab Equipment: - Crowning device - CNC 10 graphic control - Hydraulic upper tool clamping - Multi-operator functionality - Increased speeds - Automatic, height-adjustable rear sheet gauge - Draw cushion device - Horn length on each side: 2,200 mm

Condition: good (used), Year of construction: 1991, 3-roll plate bending machine Plate width: 3000 mm Plate thickness: 20 mm Pre-bending: 16 mm Top roll diameter: 380 mm Laodpfx Aey T H E Hsc Iob Side roll diameter: 340 mm

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Lajdpfxoy T H Ege Ac Ieb Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm Ledpjy T H D Aofx Ac Ieab - Max. tilting of lower traverse: 8 mm

Condition: good (used), Year of construction: 2005, control type: CNC control, Tube diameter: 30 mm Wall thickness: 2 mm Max. bending angle: +/- 180 + 10 ° Tube insertion length: 4100 mm - Round steel tube up to 30 x 2.2 mm² Lsdey T H Dpepfx Ac Isab - Round stainless steel tube up to 30 x 1.5 mm - Square tubes 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec. (feed) - Longitudinal feed speed: 450 mm/sec. - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Laedpfey T H Axjx Ac Iob Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Laodpfsyw Rzajx Ac Ieb Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: new, Year of construction: 2024, Bending capacity: 60t Bending length: 1250 mm Distance between uprights (mm): 1050 Material thickness: 7.5 mm Laedpfxod E If Sj Ac Isb Stroke length (mm): 265 Throat depth: 410 mm Installation height: 530 mm Operating speed Y (mm/sec.): 10 Motor power (kW): 7.5 Operating speed X (mm/sec.): 250 Length (mm): 2300 Width (mm): 1550 Height (mm): 2750 Weight (kg): 3,100 Standard equipment: Y1, Y2, X, R (4 axes) X = 650 mm X, R Control unit: DURMA DT15 European clamping system 60 mm die holder (only for European dies) Throat depth: 410 mm Backgauge: Siemens DC servo-driven, linear guide & ball screw system Protective cover Special accessories: European upper tool P97.75.R08 (one in segmented design) European lower tool M.460R.85 (one in segmented design) DURMA quick clamping system CE with manual F.AKAS II M -FPSC-B-C + safety cover & switch Other machines are available for demonstration at our Staufenberg location. Further information available upon request.

Condition: as good as new (ex-display), Year of construction: 2024, Machine dimensions: - (L x W x H) 9,350 mm x 2800 mm x 2300 mm, length with filter 5300 mm. Technical details: - Max. Sheet size: 3,048 x 1,524 Max. - Max. Sheet weight: 200 kg/m² -Laser power (IPG): 6 kW -Travel distance Z - axis: 125 mm -Max. Synchronization speed (X-Y): 141 m/min. -Max. Acceleration (X-Y): 10 m/s² - Positioning accuracy: ±0.05 mm - Repeat accuracy: ±0.05 mm Lajdpfxed N Rfdj Ac Isb Basic equipment: -Control: Siemens Sinumerik 840 D - Laser head: Precitec light Cutter F 125 Focus - Sheet position detection and measuring system -Positioning laser diode -Automatic plate changer -Automatic nozzle cleaner -Central lubrication unit - Chip tray - Software: Lantek, or Metalix Cad/Cam software with autonesting - Remote control: Remote maintenance Laser cutting options: - Pierceline (piercing settings) -Focusline - Plasmaline -Fastline - Flyline Options include: - Tower with 10 pallet positions - Automatic chip conveyor - Integrated camera (post-production of parts, micro-joints) - Air dryer - Auto. Nozzle Changer (automatic nozzle changer) - Inside camera