Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Milestone S 2040 Axis-Movement: X-Axis: 4.250 mm Y-Axis: 2.000 mm Z-Axis: 200 mm included options: - 1x §-axis cutting head - Height sensor with anticollisionsensor Hsdpfxswd Ih Ds Ag Djpa - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 45 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 5,6 ltr. / min

Condition: good (used), YEAR OF MANUFACTURE 1998 Hjdpfex H S T Nex Ag Depa

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, ROUNDO PAS-360 bending machine 4 roller bending machine CNC control ROUNDO WCN Hpodox H S Exopfx Ag Doa Max. width of rolled sheet metal 2500 mm, thickness 20 mm / in the attachment is a graph of pre-bending and rolling parameters/ Upper roller diameter 450 mm Number of rolls 4 pcs Possibility of creating and saving a rolling program for serial production Hydraulic roller drive Hardened rollers against abrasion

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Euromac hydraulic punching machine Model CX750/30 CNC Capacity: 30 t Y-axis reach: 1000 mm X-axis reach: 2000 mm Hedpfox Ey Uxsx Ag Depa X-axis reach with repositioning up to 10,000 mm Control: Euromac Eurowin 6-station multitool + 6-station die holder Table equipped with brush table

Condition: good (used), Year of construction: 2003, machine/vehicle number: 02263, Offer 25492 Technical Data Hpodpfxsx H R Rmo Ag Dsa - Upper and lower rollers driven, each roller hydraulically adjustable - Suitable for prebending and conical rolling, side supports can be swung out - Operation via separate control panel with digital actual value display - Max. working width: 2050 mm - Max. sheet thickness at 400 N/mm² without prebending: 8 mm - Max. sheet thickness at 400 N/mm² with prebending: 6 mm - Bending capacity refers to at least 3 × top roller diameter - Hardened rollers - Top roller diameter: 190 mm - Side roller diameter: 170 mm - Bottom roller diameter: 140 mm - Drive: 400 V / 3.0 kW - Required space: approx. W 3500 x H 1300 x D 1300 mm - Weight: approx. 3200 kg

Condition: good (used), functionality: fully functional, Year of construction: 1960, machine/vehicle number: G1 077, control type: manual, degree of automation: manual, actuation type: manual, controller manufacturer: peddinghaus, working width: 340 mm, cutting range flat at 90° (Y-axis): 120 mm, cutting range square steel at 90°: 50 mm, cutting range round steel at 45°: 55 mm, cutting range angle steel at 45° (Y-axis): 100 mm, sheet thickness (max.): 28 mm, working height: 800 mm, overall weight: 3,800 kg, total length: 1,000 mm, total width: 2,400 mm, total height: 2,400 mm, power: 7.5 kW (10.20 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: documentation/manual, electrical contact length stop, foot remote control, well-functioning machine with many tools Hpodpex H R Rajfx Ag Dja

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Milestone S 2040 Axis-Movement: X-Axis: 4.250 mm Y-Axis: 2.000 mm Z-Axis: 200 mm included options: - 1x 3-axis cutting head - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 45 kW Hsdpfx Agjp R Hrpo Depa Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 5,6 ltr. / min

Condition: good (used), Year of construction: 1996, control type: CNC control, pipe diameter (max.): 28 mm, Tube diameter: 4-28 mm Wall thickness: / mm Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Delivery rate: 4.5 l/min Max. bending angle +/-: 190° Nominal pressure: 250 bar Operating pressure: 3095 bar Delivery rate: 4.5 l/min Hpjdpfx Asx H R Hzog Doa Total power requirement: 1.5 kW Drive: Hydraulic cylinder and roller chain

Condition: excellent (used), Year of construction: 2001, overall weight: 1,530 kg, total length: 2,020 mm, total width: 980 mm, total height: 1,070 mm, 3 roll plate bender SCHRODER FASTI - 136 MACH-ID 9314 Make: SCHRODER FASTI Type: 136 Control: CR 80 SPS Year: 2001 Harned rolls Minimum work piece diameter 200 mm  Hpjdpfx Ajx Ew Iisg Dea Rolling 1,25 x top roll diameter Top and Bottem roll Driven Rolls 700 N/mm2 tensile strength CR-80 SPS Control Highlights of the CR 80 SPS controlThe CR 80 control offers a very comfortably and userfriendly programming. Depending on the program,it is possible to make variable radii without bendingmarks. The calculation of diameters when producingpipes is done automatically.The positioning of bending wheels, sheet feeding andback roll adjustment are frequency-controlled (only incombination with three-roll drive).Products e.g.: Pipes, silencers, triangles, squares Rolling width: 1040mm Rolling thickness 5x toproll Ø:6.5mm Top Roll Ø: 160mm Bottom Roll Ø: 160mm Side roll Ø: 160mm Length: 2020mm Width: 980mm Height: 1070mm Weight: 1530kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 4,100 mm, warranty duration: 12 months, controller model: CutLink, back gauge: 750 mm, control type: NC control, stroke rate (max.): 35 1/min, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, Demonstration machine motorized guillotine shear Producer CIDAN Hpjdpfx Agswxu S Ee Doa Year of manufacture 2023 Cutting length 4100 mm Sheet thicknesses 1.50 mm at 400 N/mm² Sheet thicknesses 0.60 mm at 700 N/mm² Sheet thickness 2.2 mm at 200 N/mm² Up to 35 strokes per minute Equipment: Touch control CutLink Backgauge range 5-750 mm Pneumatic sheet holding device forward depositing Sheet chute forward depositing (return to sender) Extendable table support range 800 mm LED cutting line lighting Machine is available in our showroom in A- 6800 Feldkirch Delivery time: immediately

Condition: good (used), Year of construction: 2009, machine/vehicle number: B 0702A0153, Offer 25506 Hjdpfsx H R A Aex Ag Dopa Technical Data: - Pressing force: 36 t - Working width: 1050 mm - Clearance between uprights: 830 mm - Installation height: 300 mm - Ram stroke: 110 mm - Throat depth: 290 mm - Drive: 400 V / 6 kW - Space requirement: approx. W 1850 x H 2400 x D 1350 mm - Weight: approx. 2600 kg - with: 6-axis control TRUMPF - Safety light curtain - Folding support table - Electric foot switch

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 150 mm, roller (top) diameter: 170 mm, side roll diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 1,500 kg, total length: 2,500 mm, total width: 800 mm, total height: 1,100 mm, power: 5 kW (6.80 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, PLATE ROLL 2000x6 mm SERGI 3ROLL INITIAL PINCH ASYMMETRIC 2050 X6 MM Hsdpex Ewa Ejfx Ag Djpa Rolls length 2050 mm -Top roll 170 mm -lower/Side rolls 150 mm -Power electric 5,5 Hp Capacity -plate width 2000 mm -plate thickness 6 mm with prepinch Configuration on the machine -Rollers surface hardened high strength -Central rolls driven electric rotation on gearunit -side roll electric run with prepinch Pinch roll position with handwheel Front open manual drop-end -Readout gauge of side bending roll -Foot-pedal electric rollers rotation back/forth -Joystick electric control of side roll -Safety installations with emergency stop.

Condition: new, "Properties: Bending radii: R10 to R200 (min. R= 1.8xD) (depending on the wall thickness, the material and the pipe diameter) Max. Bending speed: 2 rpm and 3.2 rpm without inverter Operation: NC soft-touch control panel in 8 different languages and foot pedal Number of programs: 30 per 9 bends Control: NC1 Bending direction: counterclockwise Effective length (available in different lengths as required): 1,5 / 3 / 4 / 6 m Dimensions (W x H x D): 1000 x 1500 x 3600 mm (length for 3 m version) Weight: approx. 600 kg (with 3m mandrel) NOTE: The price quoted refers to a length of 1.5 m. Other lengths available on request! Premature mandrel retraction Positioning and rotation with mechanical stops and precise digital display Pneumatic four-jaw chuck Performance: Hard copper and aluminum : 60 x 4 mm Steel tube : 60 x 3 mm Stainless steel : 60 x 2 mm Hedsuudrkjpfx Ag Dspa Scope of delivery: Machine Standard accessories (e.g. foot switch, operating instructions, 2 hex, 4 sets of chuck jaws, bending grease, 25 mm mandrel bar) Delivery without hydraulic oil"

Condition: good (used), Year of construction: 1987, control type: CNC control, bending force (max.): 1,250 t, throat depth: 770 mm, Press force 1250 t Bending length 15000 mm Upright spacing 10160 mm Control system CNC 10 graphics Throat depth 770 mm Table length 15000 mm Hpodpfex H R Dgsx Ag Dea Machine weight approx. 230 t Required space approx. 17000 x 5400 x 5900 mm Additional information: - Press force: 1,250 t - Bending length: 15,000 mm - Control: CNC 10 graphics - Number of controlled axes: at least 10 - Upright spacing: 10,160 mm - Throat depth: 770 mm - Table length: 15,000 mm - Dimensions: 17,000 mm x 5,400 mm x 5,900 mm - Weight: approx. 170 t Equipment: - Crowning device - CNC 10 graphic control - Hydraulic upper tool clamping - Multi-operator functionality - Increased speeds - Automatic, height-adjustable rear sheet gauge - Draw cushion device - Horn length on each side: 2,200 mm

Condition: refurbished (used), functionality: fully functional, Year of construction: 2020, operating hours: 10,000 h, control type: CNC control, degree of automation: semi-automatic, laser source manufacturer: MAX, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, table length: 4,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, fume extraction, nozzle changer, safety light barrier, Bodor S4020 machine from 2020, available for sale following cessation of operations. Hjdpfxjx H Nqxj Ag Dspa

Condition: good (used), Year of construction: 1987, number of straightening rollers: 13, working width: 2,000 mm, sheet thickness (max.): 10 mm, max. sheet width / max. sheet width: 2000 mm max. sheet thickness / max. sheet thickness( St 50): 10 mm min. sheethickness Blechdicke / min. sheet thickness: 3 mm Anzahl der Richtwalzen / number of straightening rollers: 13 Walzen / rollers Richtwalzendurchmesser / diameter of straihgtening rollers: 145 mm Richtgeschwindigkeit / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Mittenabstand der Richtwalzen / distance b/n rollers centers: 150 mm Stützwaldermesser / diameter of bottom rollers: 290 mm Anzahl der Stützwalzen / number of bottom rollers 21/24 Anzahl der Abstützungen( oben/unten): 3 /3 Hubgeschwindigkeit der Traverse / speed of adjustm. of traverse: 0,71 mm / sec Hubweg der Traverse / way of traverse: -18 mm to +42 mm max. Schwenkung der unteren Traverse / max. swivel of lower traverse: 8 mm Hauptantriebsmotor / power of main motor: 30 kW Gewicht der Maschine / weight of the machine: 32 t Hpjdpfxjx H R A No Ag Dsa

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, working width: 2,000 mm, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec Hedpfx Agsx H Rurs Dspa - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW Hpodpfjx H Rt Uox Ag Dja

Condition: good (used), Year of construction: 1990, number of straightening rollers: 19, working width: 750 mm, sheet thickness (max.): 12 mm, Year of manufacture / YOM: 1990/ 2023 Overhauled / Overhauled: 2023 Hsdpfx Agsx H Rt Is Depa Sheet width / Sheet width: Max. 750 mm Sheet thickness / Sheet thickness: approx. 0.5-12 mm Part length in direction of passage / Part length in direction of passage: min. approx. 100mm Feed rate / Feed rate: 2-20 m/min Number of straightening rolls / Number of straightening rolls: 19 pcs Diameter / diameter: 50mm Workpiece infeed height / Workpiece infeed height: 900mm Power requirement / Power requirement: 31kW

Condition: good (used), Year of construction: 2005, control type: CNC control, - Max. bending angle: +/- 180 + 10° - Tube feed length: 4100 mm - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm - Square tubes: 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec (advance) - Longitudinal feed speed: 450 mm/sec - Maximum bending radius: 125 mm Hpjdjx H Rthspfx Ag Dja - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic

Condition: good (used), Year of construction: 2008, control type: CNC control, Stainless steel tube diameter: up to 42 x 2.0 mm Steel tube diameter: up to 42 x 3.0 mm Max. bending angle: +/- 180 + 10° Section modulus: 4.1 ccm Operating pressure: 6 bar Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 6100 x 2300 x 1300 mm Hpsdpfx Aex H Rtbsg Dsa

Condition: good (used), Year of construction: 2001, Tube diameter 76.1 mm Max. tube feed length 4500 mm Max. bending radius 200 mm Machine weight approx. 1.7 t Required space approx. 6000 x 1000 x 1300 mm - Max. tube diameter: 76.1 mm - Max. tube feed length: 4500 mm - Max. bending radius: 200 mm - Bending direction: right - Electronic 1-axis control - 2-axis measuring system - Electronic display of torsion Hodpfx Agsx H Rrwe Dspa - Electronic display of longitudinal position - Torsion angle unit with stops - Early mandrel retraction - Automatic mandrel lubrication with micro-oil dosing Accessories: - Incl. bending tools 21.3 / 26.9 / 33.7 / 42.4 / 48.3 / 60.3 / 76.1 mm x 2D - Incl. various mandrels

Condition: good (used), control type: CNC control, controller manufacturer: Siemens, controller model: 840 D, pipe diameter (max.): 168 mm, Pipe diameter: 168.3 x 11 mm Pipe insertion length: 6000 mm Maximum bending radius: 700 mm Control system: Siemens 840 D Minimum bending radius: 80 mm Maximum bending angle +/-: 190 ° Connected load: 400 V / 50 Hz / 85 A Dimensions (L/W/H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t Hpedpfxjx H Rrqo Ag Dsa Additional information: - CNC control: CNC MMI Multicontrol 2000 - Control system NCU - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tooling is available: Pipe Ø 48.3 mm; Radius 105 mm Pipe Ø 60.3 mm; Radius 120 mm Pipe Ø 63.5 mm; Radius 150 mm Pipe Ø 76.1 mm; Radius 190 mm Pipe Ø 88.9 mm; Radius 222 mm Pipe Ø 114.3 mm; Radius 285 mm Pipe Ø 139.7 mm; Radius 350 mm Pipe Ø 141.3 mm; Radius 700 mm Pipe Ø 168.3 mm; Radius 420 mm A few mandrels have a direct engraved marking. These have the following specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following outside diameters of the mandrels were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package is valued at approximately €150,000.

Condition: good (used), Year of construction: 2000, Tube diameter: 76.1 mm Hedpfx Agjx H Rq Ts Dspa Tube insertion length: 4500 mm Max. bending radius: 200 mm Bending direction: right Machine weight approx.: 1.7 t Additional information Control: electronic 1-axis control

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Hsdpfxox H N Azs Ag Dspa Additional information - Specification - Back stop - Roll shelf