Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. Ijdpfxox Uyzqe Ah Nstb 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2018, Serial number: 4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20805 Specifications: 2018 model Engine hours: Approx. 3500 Hammer hours: Approx. 19000 Weight: 11,100 kg Iodpfx Aowvzrmsh Notb Chassis (see pictures) Belt width: 25 cm Total width: 220 cm Rod shifter New depth gauge Vacuum cleaner Winch Service history 2 track guides are being replaced before sale Ready for delivery Description:Well maintained Sandvik DINO 400 Drilling Rig.The rig is from 2018 and has had approximately 3500 engine hours.Equipped with rod changer and new depth gauge.Ready for delivery. Own weight: 11100 Model: Dino DC400RI

Condition: used, Year of construction: 2012, Serial number: 120705xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21979 Specifications: - 2012 model - Hours: Owner is uncertain - Double key - Deutz Engine - Water tank - Undercarriage (see pictures) - Washer - Comes with drilling equipment, 3 hammers - 4-10 inch holes - Services have been done myself - Ready for delivery Itedpfx Asx Dhakjh Nob Own weight: Model: 2012 Gemsa Brønnborerigg

Condition: used, Year of construction: 1986, Serial number: 606xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21730 Spesifikasjoner:  1986 modell Motortimer: ca 3000 6 sylindret Dutch motor Skiftet motor   HLR 438l hammer  Vernebur  Understell (se bilder)  Maskin bredde: 231 cm  Vinsj  Itsdpexu A N Uefx Ah Neb Støvsuger  Lys  Video  Leveringsklar      Beskrivelse: Vi har en 1986 Tamrock DHA400 Borerigg m/ HLR 438L hammer for salg.  Riggen fungere, men feil og mangler kan forekomme og noe påkost må regnes med da den er ifra 1986. Leveringsklar. Own weight: 1 Engine hours: 3000 Model: DHA400 Borerigg m/ HLR 438L hammer

Condition: used, Year of construction: 2004, Serial number: EKJ0043xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21885 Specifications: - 2004 (2012) model - Hours: Approx. 600 - Weight: 6200 kg - Chassis from 2004 - The rest is from 2012 - Drilling equipment is not included - 2 engines can be included as parts - Ready for delivery Description: The rig burned down and then everything was replaced in 2012. The chassis is from 2004, but the rest has been replaced. The job was done by Epiroc. The machine is ready for delivery. Own weight: 6200 Itjdpfx Asxy Eyash Njb Engine hours: 600 Model: 2004 (2012) Welldrill 3050CR Borerigg

Condition: used, Year of construction: 1989, Please contact ATS Norway for more information Please provide reference number upon request: 21250 Itedpfsw Ucm Ujx Ah Neb Specifications: 1989 model Hours: 5520 Hammer is working Needs a new battery Winch and vacuum are working according to the owner Ready for delivery. Own weight: Engine hours: 5520 Model: 712HC-01

Condition: used, Year of construction: 2019, Serial number: 5xxxx Please contact ATS Norway for more information Itjdpfx Ahsw Rag Do Nob Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer is good. Work lights Thread greasing system Radio Air conditioning Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer has been repacked newly.Ready for delivery.

Condition: used, Year of construction: 2014, Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21943 Specifications: Year model: 2014 Engine hours: approx. 6000 Power: 105 kW Weight: 11,000 kg Undercarriage (see photos) Remote control Winch Track width: approx. 25 cm Machine width: approx. 220 cm Newly overhauled engine Newly overhauled hammer, used approx. 20 hours after overhaul Stage 4 engine Screen backlight is slightly weak Description:Sandvik Dino DC400RI drilling rig from 2014.Both the engine and the hammer have been overhauled. The engine has run approx. 1000 hours since the overhaul, while the hammer has only been used for a couple of weeks.Some minor leakage/sweating.Can be delivered at short notice.See video. Own weight: 11000 Engine hours: 6000 Iodpox Anauefx Ah Njtb Model: Dino DC400RI Borerigg. Overhalt motor og hammer SE VIDEO

Condition: used, Year of construction: 1996, Serial number: 8xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21912 Specifications: 1996 model 1848 hours (I'm a little worried) 564 stroke hours 82 kW Weight: 8160 Machine width: 230 cm Winch Directional instrument Boart HD125 hammer Chassis Diesel heater Videos Ready for delivery Description: We have a 1996 Nemek 503 TXI drilling rig w/ low hours for its age for sale. Errors and defects may occur as the rig is from 1996. But the owner says it works as it should. Ijdpsxz N Ahofx Ah Nstb It has few hours on the engine and hammer in relation to its age. Ready for delivery Own weight: 8160 Engine hours: 1848 Model: 503 TXI borerigg m/ lite timer i forhold til alder

Condition: used, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 21854 Specifications: 2019 model About 7135 hours (will give a little) Stroke hours: 3432 hours Compressor time: 5292 hours Chassis (see pictures) CME grinder Water mist Leica GPS Recently serviced Carousel Vacuum cleaner Rod shifter Automatic drilling Protective cage Winch Air conditioning/ac Radio Itsdjxypt Repfx Ah Nob Remote control Light Ready for delivery   Description: We have a 2019 DX800i drilling rig w/ water mist and Leica GPS for sale. All services and maintenance have been carried out continuously and the rig is in good condition according to the owner. The rig has recently undergone new service. Ready for delivery Engine hours: 7135

Condition: excellent (used), functionality: fully functional, power: 125 kW (169.95 HP), emission class: euro5, Year of construction: 2019, operating hours: 4,500 h, Conrad Boxer 200 drilling rig with desanding unit Advanced wash drilling system, ideal for clay soils and geothermal applications. Includes 150 meters of drill pipes. The machine is equipped with a custom sand separation unit that efficiently separates clay and water, optimizing the drilling process. Hydraulically driven crawler chassis with rubber-vulcanised track shoes, track width 400 mm. Self-supporting welded steel subframe with stabilizing cylinders. Iveco NEF 45 ENT diesel engine, approx. 125 kW. Fully equipped hydraulic system with stainless steel reservoir. Modem installation for remote diagnostics. Radio remote control for travel and drilling functions. Fixed control panel with lockable enclosure. Hydraulically folding mast for 4 m drill rods. Mast translation system with 400 mm stroke. Vertical hydraulic feed system. Drill carriage and guide rail system. 4-inch hydraulic drill head Conrad T-4-5-600. Hydraulic tilting system. Weight compensator for drill rod protection. Hose and cable management system. Hydraulic top clamp. Hydraulic flushing pump. Prepared for displacement pump installation. Hydraulic piston pump. 3-inch water circuit with flow meter. Flow control valve. Hydraulic breakout clamp. Drill rod storage cassette. Pipe handling manipulator. Ijdpfsx Uyukjx Ah Notb Automatic lubrication system.

Condition: good (used), Drill bit, step chisel, drill bit for well drilling, core drill, core drilling machine, diamond drill bit, drill bit for well drilling machine -Drill bit: diamond core bit Ø 142 mm -Hole: Ø 125 mm Iedsxd Sd Hspfx Ah Njtb -Dimensions: see photos -Dimensions: Ø 142 x 175 mm -Weight: 3.9 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Stamp: for Herrenknecht tunneling -Piston diameter: approx. 140 mm -Piston rod: Ø 115 mm -Stroke: 310 mm -Max. Stamp pressure: 500 bar Iodpfxjcgf Rzs Ah Notb -universal: applicable -Number: 3x cylinders available -Price: per piece -Dimensions: 168/200/H550 mm -Weight: 82 kg/piece

Condition: good (used), diamond core drilling machine -Drill stand Iodpfsdpvwwsx Ah Notb -vacuum pump -Core drill: Ø 202 mm (picture) -Machine dimensions: 500 x 370 x H1070 mm -Weight: 53 kg

Condition: good (used), Control container, control cabinet Iodpfsb A Su Dsx Ah Netb -Control cabinet for tunnel boring -comes from the company Lemme Berlin -for bentonite pumps -Control panel -PLC control -Dimensions: 600/350/H1320 mm -Weight: 60 kg

Condition: good (used), Core bit, step chisel, core bit for well construction, core drill, core drilling machine, diamond core bit, core bit for well drilling machine -Drill bit: 3 pieces drill holder plus 1 piece extension adapter -Dimensions: see photos -Delivery/Price: complete -Transport dimensions: 250/250/H280 mm Iedpfx Ahjvmyrus Njtb -Weight: 27.3 kg

Condition: used, Filling system, filling machine, filling station, table filling machine, filling machine, liquid filling machine, filler, dosing computer terminal -Manufacturer: Hilger u. Kern Dopag, dosing computer terminal -Type: ZM 9310-1-0 -Voltage: 230V 50Hz 1A -Connection cable: see photos -Dimensions: 535/330/H170mm Itodpfoumpnbox Ah Njb -Weight: 9.6 kg

Condition: good (used), diamond core drilling machine -Drill stand -vacuum pump -Water pump reservoir -Core drill bits: Ø 15/20/3x 25/3x 28/32/40 mm Itsdpfsb A H U Asx Ah Nob

Condition: used, Oil filter system, oil cleaning system, oil transfer system, hydraulic unit, hydraulic pump, hydraulic pump, hydraulic test pump Itedpfod Scprsx Ah Njb -Operating pressure: max. 420 bar -Dimensions: 140/68/H245 mm -Weight: 2.3 kg

Condition: good (used), Core drill, core drill, diamond core bit, drill bit -Core drill: Ø 1x50/1x63/1x68/12x90/5x100/1x81/3x80/2x65/1x120/1x130 mm -Quick-change chuck: SDS Max -Weight: 42 kg Itjdpfx Ajb A I U Ajh Nsb

Condition: good (used), portable oxygen breathing apparatus for tunnel boring -for: Herrenkecht tunnel boring machine -System-No: 009-07-06 -in: 2x aluminum cases -various hoses Itodpfx Asb A Ibzsh Nob -Transport weight: 100 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Stamp: for Herrenknecht tunnel boring -Piston diameter: approx. 150 mm Itodpsb A Rcusfx Ah Neb -Piston rod: Ø 110 mm -Stroke: 700 mm -Usable: universal -Number: 2 cylinders available Price: per piece -Dimensions: 950 x 300 mm -Weight: 150 kg/piece

Condition: good (used), Diamond core drilling machine, core drilling machine -3x: drill stand Itjdpfxeb A Idyo Ah Nob -Max. Drilling capacity: Ø 60 mm -drilling depth: max. 400 mm -Drive: 1050 W -Speeds: 1500/3000 rpm -Core drill: Ø 18/24/29 mm -Sale: only complete -Weight: 70 kg

Condition: good (used), Core drill, crown drill, masonry drill, core drilling machine, diamond core bit, drill bit Itedpfx Ahob A Sm Aj Njb -Core drill bit: Ø 150 mm -Drill bit length: 470 mm -Quick-change mount -Weight: 5 kg

Condition: excellent (used), operation weight: 21,000 kg, Year of construction: 2008, operating hours: 16,850 h, Equipment: air conditioning, Sandvik DP1100 Year : 2008 operation hours: 16.850 hrs Hammer hours: 8.180 hrs ROPS Ijdpfjx Nh Tdox Ah Notb Airco Back drive camera incl. drill rods 1 × drill hammer CAT engine CE U/C : 60-70% good operation weight : 21 to