Condition: good (used), Year of construction: 2005, sheet width 2560 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2600 mm down holder 15 Stück no. of strokes max. 24 Hub/min oil volume 120 ltr. cutting angle 1.6 ° back stop - adjustable 750 mm Control PRG 911-1 Number of working hours ca. 370 h total power requirement 11.0 kW weight 4700 kg range L-W-H 3190 x 2100 x 1560 mm with only approx. 370 operating hours (!) Features: - Robust electro-hydraulic oscillating shear - Digital position display for electric backgauge * Backgauge travel X = 750 mm * Backgauge with backlash-free ball screw * Travel speed 100 mm/sec - 1x sturdy side stop * With T-slot, flip-stop, and millimeter scale Bledpezh N U Refx Adrsi - 2x sturdy front support arms - Electric cutting length limiter * Cutting length limiter to increase strokes per minute - Manual cutting gap adjustment * centrally operated on the left side stand - front support plates - front finger/interference guard - jog mode with push buttons on the control panel - protective guard = safety device behind the machine - operating instructions (PDF)

Condition: new, Year of construction: 2019, sheet width 1050 mm Bjdszh N Uwopfx Adrjli plate thickness 4,0 mm roll diameter 110 mm total power requirement 2,2 kw

Condition: used, material width max. 700 mm Bedpfx Ajzh N T Todrsli max. 1 mm Cutting capacity structural steel max. 1 mm Cutting capacity aluminum max. 1 mm Cutting capacity stainless steel max. 0,5 mm max. 1 mm max. 1,5 mm weight of the machine ca. ca. 150 kg dimensions 1200 x 400 x 1200 mm

Condition: new, engine 2,8 KW weight of the machine ca. 320 kg Bedpfx Ajy H N Nzedrjli dimensions of the machine ca. 86 x 90 x 85 cm

Condition: used, Year of construction: 2006, pressure 135 t chamfer lenght 2550 mm distance between columns 2050 mm control CYBELEC ModEva 10 S dayligth 570 (EHT) mm total power requirement 25 kW weight of the machine ca. 11.000 kg Machine: - Sturdy machine frame constructed as a fully welded all-steel structure - Pressure beam with high bending strength - Electrohydraulic top drive via proportional valves - Modern block hydraulic system Optional equipment: - Increase in installation height and stroke by 150 mm each - Backgauge system 2 - 2 axes, R-axis adjustment 150 mm - 2 x additional stop fingers 2/4-axes, however, offset by 20 mm - CNC holding device - Distance from the bending line to the holding device approx. 240 mm Bodoy D T S Ispfx Adreli - EHT quick-clamping device for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering - EHT lower tool clamping, mounting width 55 mm, pneumatic - Hardened insert strip for EHT lower tool clamping 55 mm / 90 mm - Die shift CNC-controlled, infinitely variable - CNC crowning device in the table (table width min. 110 mm) without tool clamping - SICK V4000 safety device - 2 x bending aids, max. 1500 N - 2 x 2 support rails for bending aid with 14 mm T-slot and scale - 2 x table extensions for bending aid - Parking position on right and left, short

Condition: used, pressure 40 t Blsdpjyv Nuijfx Adrei throat 175 mm work height max. 1055 mm stroke 30 mm sheet thickness - max. 8 mm total power requirement 4 kW weight of the machine ca. 1020 kg dimensions 910 x 670 x 1930 mm

Condition: new, sheet width 1550 mm plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm Blodpfx Ajyvvrhodrji weight 1265 kg dimensions 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: new, L-beam 50x5 mm square material 50x40x3 mm Bjdpfx Adeyvvnisrjli I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm tube diameter Ø 70x2 mm roll diameter 155 mm bending speed 4,3 m/min Shaft diameter 50 mm total power requirement 1,5 kW weight 400 kg dimensions 830x730x1350 mm Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Bedpjzh I Iiefx Adroli Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: used, functionality: fully functional, Year of construction: 2003, Hydraulic plate shear Manufacturer: GASPARINI, Type: CO 3006 Year of manufacture: 2003 Bedpfjzh Id Rox Adreli Technical data Manufacturer: GASPARINI Type: CO 3006 Year of manufacture: 2003 Sheet width: 3050 mm Stand distance: 3200 mm Overhang: 510 mm Sheet thickness: 6 / 8 mm ST / VA 4 mm Rear back gauge: 750 mm Cutting angle: 0.5 - 2.5° Power: 7.5 kW Machine weight: approx. 9 t Dimensions: approx. L 3.65 x W 2.2 (plus support arms) x H 1.9 m Equipment • Controlled rear back gauge 1000 mm, can be swiveled upwards • Control system DELEM DAC150 • Ball rollers in the support table • Foldable finger guard • Front angle back gauge + support arm • Central cutting clearance adjustment • Automatic cutting angle adjustment • Pneumatic hold-down device • Cutting edge lighting • Rear guard with side protection grilles • Spare blades All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2005, Used 3.6-meter CNC press brake by Ermaksan Type: AP 3600 x 200 Capacity: 3600 x 200 tons Elgo NC control system 1 set of tooling Bljdezh Icyopfx Adroi Year of manufacture: 2005

Condition: used, Year of construction: 2017, Used 3-meter press brake from Safan Type: E Brake 100 3100 Capacity: 3100 x 100 tons Bjdpezh Ibvsfx Adroli Y1, Y2, X, Xdelta, R, Z1, and Z2 are CNC-controlled E Control Hydraulic WILA top clamping system 1 set of complete tooling Year of manufacture: 2017

Condition: ready for operation (used), Year of construction: 2017, operating hours: 14,429 h, controller manufacturer: AMADA, controller model: AMNC 3i, laser power: 3,500 W, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, overall weight: 7,700 kg, total width: 5,745 mm, total height: 2,271 mm, product length (max.): 2,630 mm, number of axes: 3, This 3-axis AMADA LC2415 Alpha 5 was manufactured in 2017. It features a maximum processing area of 5,040 × 1,550 mm and a powerful 3,500 W CO₂ laser, capable of cutting mild steel and stainless steel up to 10 mm thick. The machine has a maximum simultaneous feed rate of 114 m/min and can handle workpieces weighing up to 330 kg. If you are looking to get high-quality cutting capabilities, consider the AMADA LC2415 Alpha 5 CO₂ laser cutting machine. Contact us for further details. • Control: AMNC 3i • Controlled axes: X, Y, Z (three axes controlled simultaneously) • Maximum processing area: 5,040 × 1,550 mm (with one reposition) Bljdpfxszh Hydo Adrsi • Maximum simultaneous feed rate (X/Y): 114 m/min • Repeatable positioning accuracy: ±0.01 mm • Maximum workpiece weight: 330 kg • Processing surface height: 820 mm • Work chute size: 550 × 1,750 mm • Laser resonator: AF3500i-C • Laser type: Fast axial flow, high-frequency discharge excitation CO₂ laser • Wavelength: 10.6 µm • Maximum cutting thickness: • Mild steel: 10 mm • Stainless steel: 10 mm • Aluminum: 8 mm Additional equipment • MP300 Automatic Sheet Loading System

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Completely new resonator available at the end of 2025 with 6,000 watts + New laser cutting head (investment approx. EUR 190,000 in 2025) Immediately available - inspection possible Manufacturer: Bystronic Model: BySprint fiber 3015 Year of manufacture: 2022 / new resonator and cutting head in 2025 Sheet metal format: Max. format, 4,000 x 2,000 mm Operating hours: After upgrade at the end of 2025: approx. 1,400 operating hours, approx. 550 cutting hours Before upgrade until 2025: approx. 17,700 operating hours, approx. 7,500 cutting hours SPECIAL EQUIPMENT: - Cut Control Fiber - Part and cross conveyors in the cutting area Blodpfxjzh E Ugo Adrsi - Dust extraction system with 200-liter drum adapter - Upgrade in 2025: 6,000-watt fiber laser with new cutting head Standard equipment: BySprint Fiber 4020 Pallet changer system with 2 pallets Closed enclosure/roof Scrap conveyor with rollers CNC control and cabinet Touchscreen with user interface for ByVision Operation and comfort Maintenance Messenger Restart Manager System Manager Handheld operating device ByHand Cutting parameter assistant Uninterruptible power supply (UPS) Cutting bridge OPC interface cutting Cutting head Piercing Jet ByPos Fiber Detection Eye Nozzle cleaning Scanning Fiber laser sources Tank heater Tropicalization Interface to automation/handling Cooler Operator protection in the cutting area Operator protection in the loading/unloading area Voltage 400V / 50Hz Compressed air (machine incl. laser source and cooler) Material specification Part tolerances and cut surface quality Cutting gas supply and cutter quality TECHNICAL DATA: Maximum positioning speed parallel to the axes X/Y: 100 m/min Maximum positioning speed simultaneously: 140 m/min Positioning deviation Pa (VDI/DGQ 3441): +/- 0.1 mm Positioning scatter Ps (VDI/DGQ 3441): +/- 0.05 mm Edge detection accuracy: +/- 0.5 mm Maximum workpiece weight: 1580 kg Table change time: 35 seconds Laser power: 6,000 watts Maximum sheet metal thickness: Steel: 30 mm Stainless steel: 25 mm Aluminum: 20 mm Brass: 15 mm Copper: 15 mm Machine weight (without extraction, cooler): approx. 15,000 kg Machine dimensions, approx.: 13,743 mm length, 6,670 mm width, 2,565 mm height This used machine can be inspected under production conditions. All information is without guarantee - sale is made excluding any guarantees or warranties. Subject to prior sale.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Sheet width: 3000 mm Sheet length: 1500 mm Sheet thickness: 8 mm Workpiece weight: 200 kg Punching force max.: 220 kN Total power requirement: 9.5 kW Space requirement approx.: 7395 x 6540 x 2072 mm Equipment: Punch head: - Hydraulic single-tool chuck with 360° rotation - Manually adjustable clamping force - Programmable clamp (active/passive/re-positioning) - Spray lubrication for punch - Stroke counter for punch - Level monitoring for threading and tool lubrication Control system: - Open control system based on Sinumerik 840 D - 12" TFT color display - Teleservice via internet - Automatic shutdown Data transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Dual light curtains - Rapid shutdown of hydraulics - Bulge detection Programming: - TruTops Punch via network access 1 x MultiTool function 1 x MultiShear function 1 x Thread forming function 1 x Deburring and rolling technology 1 x SoftPunch function 4 x individually openable clamping jaws 4 x height-adjustable clamping jaws 1 x Re-positioning cylinder 1 x Sensor for stripper (included in rest material-free processing) Bjdpfsy Sak Tox Adrsli - GripMaster - Rest material grippers with sensor technology - Shear lift table 400 mm - Tilting rest material pallet 3000 x 1500 mm - SheetMaster - Operating hours: 65,000 h

Condition: ready for operation (used), Year of construction: 2012, laser power: 4,000 W, travel distance X-axis: 3,000 mm, number of axes: 3, This 3-axis Mazak Optiplex 3015 was manufactured in 2012. It features a powerful 4 kW resonator and can accommodate a maximum sheet size of 3000 x 1500 mm. If you are looking to get high-quality laser cutting capabilities, consider the Mazak Optiplex 3015 CO2 laser cutting machine we have for sale. Contact us for further details. Bledpfxjzh E Aqs Adrei • Resonator power: 4 kW • Max sheet size: 3000 x 1500 mm

Condition: not inspected (used), functionality: limited functionality, Promecam Press Brake 100 t / 2,000 mm – Uninspected For sale is a used Promecam press brake with a pressing force of 100 tons and a working length of 2,000 mm. Bledpjzhx E Sofx Adroi The machine is sold as is, without inspection, commissioning, or any guarantees regarding its current condition. Technical Data Manufacturer: Promecam Pressing force: 100 t Working length: 2,000 mm Operating voltage: 400 V Hydraulic drive MB control Manual and automatic operating modes X, Y, and R axes Condition The machine is in used condition, with normal signs of wear and tear consistent with its age. The following functions have been verified: Control starts Hydraulic pump runs X-axis moves Known defects: Y-axis is currently not functioning R-axis is currently not functioning Further functional testing or adjustment has not been performed. Scope of supply Machine as shown in the picture No tools included

Condition: used, Year of construction: 1963, total length: 2,000 mm, total width: 800 mm, total height: 1,400 mm, Empty weight: 1.000 kg - Year: 1963 - Documentation available: No - CE certificate present: No - Serial number: H2111 - Drive system: Conventional - Number of rolls [pcs.]: 3 - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 1550 - Transport dimensions: 2000mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bsdpfxozhw Dts Adreli Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2022, Bystronic ByBend Smart Hydraulic press brake Serial number: BYBEND22335SE Bljdpfoy U I Rysx Adrji Year of manufacture: 10/2022 Maximum pressing force: 2250 kN Working length: 4100 mm Maximum stroke: 300 mm Machine weight: 16,500 kg Equipment: Tools

Condition: like new (used), Year of construction: 2022, Bystronic XACT Smart 160/3100 Hydraulic Press Brake Manufacturer: Bystronic Model: XACT Smart 160/3100 Bledpey U I Tbofx Adrsi Serial number: XACT 22040SE Year of manufacture: 02/2022 Technical specifications: Maximum pressing force: 1600 kN Maximum working length: 3100 mm Maximum stroke: 200 mm Rapid traverse speed: 140 mm/s Working speed: 1–10 mm/s Return speed: 115 mm/s Machine weight: 10,500 kg

Condition: like new (used), Year of construction: 2021, pressing force: 225 t, Bystronic Xact Smart 225/4100 – Hydraulic press brake Manufacturer: Bystronic Model: Xact Smart 225/4100 Serial number: XACT21278SE Year of manufacture: 08/2021 Technical data: Maximum pressing force: 2250 kN Maximum working length: 4100 mm Maximum stroke: 200 mm Bjdpfxey U I R To Adreli Rapid traverse speed: 140 mm/s Working speed: 1–10 mm/s Return speed: 115 mm/s Machine weight: 15,000 kg Equipment: Tools

Condition: used, functionality: fully functional, Year of construction: 2009, control type: PLC-controlled, Hydraulic plate shear Manufacturer: DURMA, Type: SB 3013 NT Year of manufacture: 2009 Technical data Manufacturer: DURMA Type: SB 3013 NT Year of manufacture: 2009 Cutting length: 3100 mm Sheet thickness: 13 mm Stroke: 130 mm Bodpjzhwfwsfx Adrsli Stroke rate: max. 13/min. Dimensions: approx. L 4.25 x W 2.40 x H 2.40 m Weight: approx. 12 t Equipment • Controlled back gauge up to 1000 mm, can be pivoted out of the way • Angle gauge • Safety light curtain for the rear of the machine • Central cutting gap adjustment • Foldable finger guard 1000 mm • Siemens PLC control • Ball rollers in the support table All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: like new (used), Year of construction: 2022, pressing force: 80 t, Bystronic Xpress 80/2100 Hydraulic Press Brake Manufacturer: Bystronic Model: Xpress 80/2100 Serial Number: Xpress 22334EU Year of Manufacture: 10/2022 Technical Data: Maximum Press Force: 800 kN Maximum Working Length: 2100 mm Maximum Stroke: 200 mm Blsdpfx Aey U I Tuedrsi Machine Weight: 6000 kg

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m dimension control panel: 0,85x0,68x1,65 m fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 accessories: - div. single and add-on parts Bljdeu Ibukopfx Adrsi *

Year of construction: 2015, operating hours: 2,677 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, number of axes: 3, This 3-axis punch press for profiles PARS HMP SIRIUS PLUS -3000/3-L1 was manufactured in 2015. It features a maximum section dimension of 110 x 110 mm and can handle wall thicknesses up to 8 mm. The machine offers a punching speed of 1 hole/s and is capable of punching 2 sections simultaneously with its 2-row design. If you are looking to get high-quality punching capabilities, consider the PARS HMP SIRIUS PLUS -3000/3-L1 punch press for profiles we have for sale. Contact us for further details. • Punching speed: 1 hole/s (including shift to next position) • Max. section dimensions: 110 x 110 mm • Wall thickness: up to 8 mm • Shear cylinder force: 17 t / 30 t • Section length: 3 m • Number of punching axes: 1–6 (holes in X–Y–Z system) • Number of punching rows: 1–2 (2-row machine punches 2 sections simultaneously) • Main axis drive: linear motor or rotary servo motor • Expanding adapter for internal section support (deformation-free punching) • Automatic mechanical centering of the section at the shear point • Micro-lubrication only at the shear point Bodpfxezhv Tts Adroli