Punching Press

MUBEA MIW 400

Condition: used, Pressing force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm at the flat bar shear With pipe shear clamp on the bar shear Foot switch for lift release Kdjdpjw Im Shofx Ahbsu support table on the stamping side Quick-change device Great condition Range of tools included in the price

Condition: new, Year of construction: 2024, 1050 mm 5.5 mm 5.0 mm Kedpfjq Sz Ahsx Ahbsdu roll diameter 130 / 195 mm 2.2 kW 1050 kg 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: ready for operation (used), Year of construction: 2018, The UniTower is suitable to store bars or extrusions as well as sheet metal, plates, Euro pallets or boxes. Pallets: Dimensions X/Y/Z: 3000mm/1500mm/90mm, payload per pallet: 1500kg, number of storage spaces: 86 pieces. Payload: 15kN, occupancy rate: 90%. Total dimensions without stations X/Y/Z: approx. 9000mm/6000mm/5800mm. On-site inspection is possible. Kjdpsxv Au Tjfx Ahbsdu

Condition: new, Fastech 3-Roll Round Bending Machine FRS 1250 x 140 Technical Specifications: Special equipment included in the price: hardened rollers motorized rear roller adjustment motorized lower roller adjustment 2 x digital display Sheet metal width 1250 mm Sheet metal thickness 5.5 mm max. Sheet metal thickness for pre-bending 5.0 mm Roller length 1250 mm Roller diameter 140 mm Kdodohzq Dxspfx Ahbeu Smallest bending diameter 210 mm Weight 1365 kg Dimensions L-W-H 2020 x 900 x 1200 mm Motor: 2.2 kW Equipment: Top and bottom rollers electrically driven Top roller can be pivoted outwards Conical bending device Asymmetrical roller arrangement Self-braking main motor Separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Kodpjxlqxfefx Ahbsdu Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: good (used), Year of construction: 1997, High-speed EDM drilling machine, KOTON Type: EDM-KTH-202A.. In good condition with cooling and filter unit. Machine documentation available. Kdsdewmn Szepfx Ahbsu See data sheet for specifications.

Condition: new, Cesurbend 3-roll round bending machine MRS 1050 x 110 Technical specifications: Kjdpehrdiuefx Ahbjdu Special equipment included in the price: motorized adjustment of the lower roll hardened rolls motorized adjustment of the rear roll digital display Sheet metal width 1050 mm Sheet metal thickness 5.0 mm max. Sheet metal thickness 4.0 mm for pre-bending Roll length 1050 mm Roll diameter 110 mm Weight 1080 kg Dimensions L-W-H 1820 x 850 x 1150 mm Motor: 2.2 kW Equipment: Top and bottom roll driven electrically Top roll can be pivoted outwards Conical bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel safety cable CE marking

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, number of rollers: 3, overall weight: 5,000 kg, Equipment: documentation/manual, Profile Bending Machine PARMIGIANI Mod. MERCORI – M. Used. Three-roll horizontal profile bending machine. Immediately available while stocks last. Visualized adjustment control. Supplied complete with tooling for bending flat bars and tubes. New electrical cabinet. User and maintenance manual included. Bending capacity: angle 120 x 120 x 12: min. Ø 1200 mm; U 160 vertical: min. Ø 1000 mm; Flat bar vertical 140 x 40: min. Ø 1000 mm; Flat bar horizontal 120 x 30: min. Ø 1600 mm; Tube 4″: min. Ø 1200 mm. Weight: 5000 kg. Motor power: 380 V, 12 Hp. Kodpfx Ajyxwdwshbodu

Condition: ready for operation (used), punching pressure 45.0 t punch diameter 22 in 15.0 mm punch diameter 38 in 8.0 mm round bar steel 30.0 mm square edge steel 25.0 L-beam 100 x 10.0 mm shear: flat material 300 x 12.0 mm adjustment of stroke 0 - 55 mm work height max. 940 / 1140 mm strokes per minute 34 punch diameter max. 110 mm voltage 400 V total power requirement 4.5 kW weight 1245 kg dimensions 1520 x 590 x 1700 mm In good condition (!!) New price ~ 13.000 Euro Special price upon request Features: - Robust electro-hydraulic profile steel shear - With multiple workstations: * Punching station * Flat steel shear * Angle/profile steel shear * Notching station - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch Kdjdpfxoxaat Uj Ahbou - Central lubrication system - Connection cable + connector

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm distance between columns 3100 mm down holder 14 Stück no. of strokes 18 Hub/min oil volume 150 ltr. cutting angle 1,2 ° Kdodpfoxabzgsx Ahbou control CYBELEC CybTouch total power requirement 11,0 kW weight 6300 kg range L-W-H 4.000 x 2.100 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device (monoblock)