Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 7,200 kg, Equipment: angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Hydraulic Guillotine Shear Make: EHT Model: TSS 6-30 Year: 2004 Bdodpfx Ajyyaprob Ija Technical Data Manufacturer: EHT Model: TSS 6-30 Year of Build: 2004 Working Length: 3050 mm Sheet Thickness: 6 mm Motor Power: 12 kW Oil Capacity: 250 L Dimensions: L 3.70 x W 2.45 m (plus back gauge arms 1m) x H 2.30 m Weight: 7.2 t Equipment • Angle back gauge • 2 support arms, laterally adjustable on linear guides • Automatic blade gap adjustment • Programmable rear gauge 10-1000 mm (pivotable) • Elgo P8721 controller • Pneumatic hold-up device with scrap chute • Sheet return to the front • Folding finger guard, 1000 mm • Cutting edge illumination • Adjustable cutting length • Rear-area safeguarding via light barrier All information provided without guarantee. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,089 h, pressing force: 102 t, stroke length: 300 mm, total height: 2,810 mm, overall weight: 6,400 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, product length (max.): 4,175 mm, number of axes: 6, This servo-electric SAFAN E-Brake 100-3100 press brake was manufactured in 2021. It offers a pressing force of 1000 kN and a bending length of 3060 mm. The machine is equipped with a CNC-controlled backgauge with X, R, Z1, and Z2 axes. If you are looking for high-quality bending performance, consider the SAFAN E-Brake 100-3100 that we have for sale. Contact us for more information • Throat depth: 590 mm • Control system: CNC – EC 20 • Upper beam stop time: < 92 ms • Safety distance (light curtain): ≥ 185 mm • Electrical supply: 3 × 400 V / 50–60 Hz / N / PE • Connected load: Max. 11 kW Additional equipment • Tools visible in the photos are not included but can be sold with the machine for an additional fee. Technical Specification Bdjdpfx Aboyx Txko Isa Bending Length 3060 mm Dimensions Machine Depth 2140 mm

Condition: new, Working width: 2540 mm Bending capacity (St42): 3.5 mm Bending angle adjustment from/to: 0 - 135° Adjustability of the bending beam: 25 mm Hydraulic motor drive power: 3.7 kW Weight, approx.: 3900 kg Dimensions LxWxH, approx.: 3850 x 1700 x 1860 mm The torsion-free, heavy machine body is designed for very high loads. This machine therefore guarantees a high and consistent quality of your bent products. The integrated tool holder makes it easy to change tools. This means that the AKB folding machine can be easily adapted to your future requirements. Model description: - MIKRA Bending Control positioning control type "M15S" (alternative control variants optionally available) Bjdpfeqa Ad Isx Ab Isda - Solid and torsion-free welded steel construction - Bending beam adjustment from 0 to 135 - Hydraulically driven upper and bending beam - Clamping pressure of the upper beam can be adjusted centrally from the front on both sides - Crowning of upper, lower and bending beam manually adjustable - Segmented upper beam / upper beam inclination 45° Scope of delivery: - Manual backgauge 600 mm - Tool set Segmented upper tool Lower beam rail Bending beam rail 25.0 mm - Manual gap adjustment - 3-way foot switch - Control valve for setting the hydraulic pressure from the front - Foot pedal with three functions, handle and emergency stop button - Light barrier - Oil filling - Documentation - CE

Condition: new, Working width: 2035 mm Bending capacity (St42): 6.5 mm Bending angle adjustment from/to: 0 - 135° Adjustability of the bending beam: 35 mm Hydraulic motor drive power: 7.4 kW Weight, approx.: 3710 kg Dimensions LxWxH, approx.: 3300 x 1550 x 1900 mm The torsion-free, heavy machine body is designed for very high loads. This machine therefore guarantees a high and consistent quality of your bent products. The integrated tool holder makes it easy to change tools. This means that the AKB folding machine can be easily adapted to your future requirements. Model description: - MIKRA Bending Control positioning control type "M15S" (alternative control variants optionally available) - Solid and torsion-free welded steel construction - Bending beam adjustment from 0 to 135 - Hydraulically driven upper and bending beam - Clamping pressure of the upper beam can be adjusted centrally from the front on both sides - Crowning of upper, lower and bending beam manually adjustable - Segmented upper beam / upper beam inclination 45° Scope of delivery: - Manual backgauge 600 mm - Tool set Segmented upper tool Lower beam rail Bending beam rail 25.0 mm - Manual gap adjustment - 3-way foot switch - Control valve for setting the hydraulic pressure from the front - Foot pedal with three functions, handle and emergency stop button - Light barrier Bdjdpfx Asqa Aa Isb Ija - Oil filling - Documentation - CE

Condition: new, Working width: 4010 mm Bending capacity (St42): 2.0 mm Bending angle adjustment from/to: 0 - 135° Adjustability of the bending beam: 25 mm Hydraulic motor drive power: 2.2 kW Weight, approx.: 5000 kg Dimensions LxWxH, approx.: 5600 x 1750 x 2050 mm The torsion-free, heavy machine body is designed for very high loads. This machine therefore guarantees a high and consistent quality of your bent products. The integrated tool holder makes it easy to change tools. This means that the AKB folding machine can be easily adapted to your future requirements. Model description: - MIKRA Bending Control positioning control type "M15S" (alternative control variants optionally available) - Solid and torsion-free welded steel construction - Bending beam adjustment from 0 to 135 - Hydraulically driven upper and bending beam - Clamping pressure of the upper beam can be adjusted centrally from the front on both sides - Crowning of upper, lower and bending beam manually adjustable - Segmented upper beam / upper beam inclination 45° Scope of delivery: - Manual backgauge 600 mm - Tool set: Segmented upper tool Lower beam rail Bending beam rail 25.0 mm - Manual gap adjustment - 3-way foot switch - Control valve for setting the hydraulic pressure from the front Bdedpfxjp Dufzj Ab Ija - Foot pedal with three functions, handle and emergency stop button - Light barrier - Oil filling - Documentation - CE

Condition: new, Working width: 2540 mm Bending capacity (St42): 4.5 mm Bending angle adjustment from/to: 0 - 135° Adjustability of the bending beam: 30 mm Hydraulic motor drive power: 5.5 kW Weight, approx.: 5100 kg Dimensions LxWxH, approx.: 3900 x 1700 x 1900 mm Model description: - MIKRA Bending Control positioning control type "M15S" (alternative control variants optionally available) - Solid and torsion-free welded steel construction - Bending beam adjustment from 0 to 135 - Hydraulically driven upper and bending beam - Clamping pressure of the upper beam can be adjusted centrally from the front on both sides - Crowning of upper, lower and bending beam manually adjustable - Segmented upper beam / upper beam inclination 45° Scope of delivery: - Manual backgauge 600 mm - Tool set Segmented upper tool Lower beam rail Bending beam rail 25.0 mm - Manual gap adjustment - 3-way foot switch - Control valve for setting the hydraulic pressure from the front - Foot pedal with three functions, handle and emergency stop button - Light barrier - Oil filling Bsdpfxep Eb Dke Ab Ijda - Documentation - CE

Condition: excellent (used), Year of construction: 2006, Sheetlength: 3100 mm Bedpfsn Smtqjx Ab Isda Cutting capacity: 6 mm Backgauge reach: 750 mm Featured with: - 3 Sheetsupports frontside - Access protection backside - Footpedal Motor power: 11 kW Machine LxWxH: 3750 x 2350 x 1850 mm Machine weight: 5500 kg

Year of construction: 2000, condition: good (used), Distance between centres: 1200 mm Centre height: 135 mm Suitable for: - Scrollbending - Torsioning Bdsdpfxott Ncpo Ab Iea - Ornamental iron curlings - Bending hooks, circles and ovals Featured with: - Various bending forms - Various bending accessories - User Manual Country of origin: Spain Motor power: 2 HP Machine LxWxH: 186 x 55 x 126 cm Machine weight: 400 kg

Condition: good (used), functionality: fully functional, pipe diameter (max.): 28 mm, bending angle (max.): 180 °, bending force (max.): 7 t, overall weight: 250 kg, Bendingcapacity: 3/8" - 2" Bending angle: 180° Revolverbending: 6-fold Attached bendingtool: Ø 28 mm Country of origin: The Netherlands Motor power: 3 kW Bdsdpfx Abswzchye Iea Machine weight: 250 kg Machine LxWxH: 1.000 x 800 x 950 mm

Condition: excellent (used), Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Bjdpfxon Smq Ij Ab Isda Revolver-adjustment: 12-positions Mandrellength: 4500 mm Sets of bendingdies: - Ø 22 mm - Ø 25 mm - Ø 48 mm Featured with: - 3 Mandrels - Mandrel retraction unit - Footpedal - Bendingspeed controller Country of origin: The Netherlands Motor power: 7,5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg

Condition: good (used), functionality: fully functional, Year of construction: 1998, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, back gauge: 1,000 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 18,400 kg, total length: 4,400 mm, total width: 2,350 mm, total height: 2,250 mm, cutting length (max.): 4,100 mm, Equipment: finger protection, safety light barrier, Cuttinglength: 4.100 mm Cutting thickness: 13 mm Back gauge: 1.000 mm Bsdpfewc Sahsx Ab Ioda Control: Darley Delem Featured with: - Sheetsupporters frontside 4000 mm - Footpedal - Material conveyor - Extra sets knives - Documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 440 x 235 x 225 cm Machine weight: 18.400 kg

Condition: good (used), punching force: 70 t, Punchingpower: 70 Ton Punching capacity: Ø 28 in 20 mm steel Throat: 300 mm Cuttingcapacity: 130 x 130 x 13 mm angle steel 90º 450 x 15 mm flatsteel 45 mm round bars Notching: 100 x 13 mm Featured with: - Elektric stop 1000 mm - Various tooling and accesories - 2 Cylinder machine Country of origin: Spain Bjdpfxouby Sle Ab Isda Motor power: 7,5 kW Machine LxWxH: 2000 x 1200 x 2000 mm Machine weight: 2000 kg

Condition: good (used), functionality: fully functional, pressing force: 110 t, working width: 3,100 mm, back gauge: 1,500 mm, distance between stands: 2,550 mm, Bending capacity: 110 Ton Bending length: 3.100 mm Distance between columns: 2.550 mm Back gauge: 1.500 mm Stroke length: 150 mm Throat: 250 mm Bsdpfx Abowi N T Eo Isda Rapid approach speed: 100 mm/sec. Bending speed: 8 mm/sec. Return speed: 65 mm/sec. Controller: ESA Kvara S630 Touch Featured with: - Foot pedal - Various tool sets - Light screen security Merlino - Controls renewed in 2018 Country of origin: The Netherlands Motor power: 7,5 kW Machine LxWxH: 320 x 160 x 244 cm Machine weight: 8.700 kg

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Bdodpfx Abeydpxve Ija Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: excellent (used), Year of construction: 2001, plate thickness 6 mm pressure 3 kW Bodpfxoyx Itis Ab Isda blade length 200 mm table dimension - longitudinal 1000 mm table dimension - cross 860 mm stroke of worktool slide 60 Hub/min angle adjustable from - to 30 - 140 Grad total power requirement 3 kW weight of the machine ca. 1050 kg dimensions of the machine ca. 1000 x 1300 x 1350 mm

Condition: good (used), Year of construction: 2002, LVD work height max. 900 mm ALPHA 1012 Control CADMAN CNC punching pressure 16 t plate thickness 8 mm plate length 1250 mm plate width 1000 mm total power requirement 13 kW weight of the machine ca. 8,3 t Bjdpfx Aeyx Itcsb Ioda dimensions of the machine ca. 3600 x 2300 x 2000 mm

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Bdedpfxjd Hxx As Ab Ija Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volts, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screws - SICK safety light curtain at the front as reach-in protection - 3 material support arms with ball transfers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Very robust machine with extremely solid construction Machine footprint (L x W x H): 4650 x 2610 x 3200 mm Machine weight: 27,000 kg Transport dimensions (base machine) (L x W x H): 4650 x 2610 x 3200 mm Transport dimensions (additional) (L x W x H): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, test cuts possible. Currently, the hold-down devices are being resealed; the resulting price adjustment will be made in the coming days.

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Bjdpfxeif Sg Se Ab Isda Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1250 mm thickness at "Niro-steel" 0.80 mm VA plate width at 30 kg/mm 2.00 mm ALU plate thickness 1.25 mm ST daylight opening 100 mm bending angle max. 135 ° height OW 100 mm total power requirement manuell weight of the machine ca. 350 kg. dimensions of the machine ca. 1715 x 750 x 1400 mm Exhibition machine from 2025 only 1x machine in stock special price on request Bedpfxoxabmpj Ab Ijda Features: - robust, manual folding machine - split upper, lower and rear tool * Height of upper tool = 100 mm * Teilung 100/100/100/100/100/100/100/100/100/70/60/50/40/30/100 * Left right with horn tool - Top tool with quick-change system - Quick foot clamping - Angle fence - lockable - Manual back gauge 500 mm - Machine can be moved (rollers) - Accessory box - rear

Condition: used, Year of construction: 1986, material width 500 mm coil weight 2 x 2,0 t material thickness 1,0 - 6,0 mm coil internal diameter 350 - 420 mm coil external diameter 1600 mm no. of straightening rolls 9 straightening roll diameter 50 mm number of draw-in rolls 2 speed 0 - 40 m/min material thickness at 500 mm material width 3,5 mm power requirement 17,5 kW Dimensions (WxDxH) 2,3 x 4,2 x 2,4 m - Straightening machine RM 5050.4/9 with infinitely variable drive, supporting rolls Bdjdpfjyx Ilxox Ab Ioa - Double decoiler AH 2000/2/M with auxiliary drive, manual centralized expansion, pneumatic snubber roll, interchangeable jaws to widen the inner diameter +130 mm can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1994, material width 800 mm coil weight 3,5 t coil internal diameter 460 - 530 mm coil external diameter 1400 mm Bjdsyx Ikzjpfx Ab Ieda power requirement 2,2 kW Weight 1,9 t Dimensions (WxDxH) 1,6 x 2,2 x 2,6 m with hydraulic auxiliary drive, pneumatic lag brake, hydraulic centralized expansion, hydraulic snubber roll

Condition: used, Year of construction: 1997, material width 300 mm coil weight 2 x 1,25 t material thickness 0,4 - 1,2 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm no. of straightening rolls 9 straightening roll diameter 30 mm number of draw-in rolls 2 roll diameter 30 mm speed 3 - 30 m/min feed length 0 - 9999,9 mm power requirement 3,0 + 2,5 kW weight of decoiler 0,7 t dimensions decoiler (WxDxH) 2,1 x 1,4 x 1,5 mm weight of straightening machine 0,45 t dimensions straightener (WxDxH) 1,5 x 0,8 x 1,1 mm weight of the feeder 0,4 t dimensions feeder (WxDxH) 1,2 x 0,8 x 1,1 mm Universal straightening machine SC 12-FQ Bdodpeyx Iknsfx Ab Ija with infinitely variable drive double decoiler 2352 B-FPS WITHOUT drive, with hydraulic expansion, pneumatic lag brake electronic roll feed WAV-RDS-2Z, modell 1082 B with AC-Servomotor, pneumatic intermediate lifting of the rolls

Condition: used, Year of construction: 1991, pressure 4 t throat 200 mm stroke 9,5 mm no. of strokes 280 - 1400 /min distance table/ram, max. stroke up, adjustment up 215 mm Bdedpfx Absyx Ikbs Ija table surface area 320 x 160 mm Table height above floor 940 mm ram surface 140 x 75 mm ram adjustment 20 mm diameter of blanks - 600 mm no. of flutes 6 - 120 material thickness 1,0 mm distance between mid parts spindle and mid ram 15 - 250 mm power requirement 3,0 kW Weight 4,30 kg dimensions of the machine (WxDxH) 1,2 x 2,2 x 2,0 m with infinitely variable drive (Stöber), pneumatic clutch-brake combination (Ortlinghaus), manual ram adjustment, pneumatic clamping of the blanks, automatic stripping device, manually adjustable table plate, manual adjustment of the punching radius, fully automated centralized oil lubrication, noise cancelling cabinet

Condition: used, Year of construction: 1997, material width 820 mm coil weight 7,5 t material thickness 0,8 - 5,0 mm coil internal diameter 470 - 520 mm coil external diameter 1600 mm material cross-cut 1600 mm² no. of straightening rolls 7 straightening roll diameter 50 mm number of draw-in rolls 2 speed 0 - 40 m/min Decoiler HH 7500.1 with: - hydraulic expansion and automatic re-tensioning - material centre adjustment - adjustable pneumatic disc brake - counter-holder with quick clamping - circular guard ring - fixed coil loading chair Insertion aid consisting of: - snubber roll (driven) - infeed wedge - hold-down roll Bodpfxjyx Ih To Ab Ioda Straightening machine BRM 50/820.7 with: - automatic circular oil lubrication of the cardan shafts - torque-dependent overload protection - motoric roller cassette adjustment with digital display - quick-change device of the cardan shafts - quick-change device of the straightening rolls Transfer table + ultrasonic control BÜU-5 with: - loop control via ultrasonic sensor (analogue) - strip sag monitoring (min/max) - strip end monitoring

Condition: used, Year of construction: 1987, material width 120 mm material thickness 0,2 - 4,0 mm no. of straightening rolls 19 straightening roll diameter 24 mm material cross-cut 2 - 120 mm² 40 mm bending speed 5 - 25 m/min power requirement 2,5 kW weight 0,85 t dimensions (WxDxH) 1,2 x 1,7 x 1,6 SPECIAL DEAL as is where is, IN NEED OF OVERHAUL WITHOUT putting into operation / WITHOUT additional work Bdjdpfxjynmpaj Ab Ija free loaded to truck