Condition: used, Year of construction: 1989, pressure 50 t chamfer lenght 2085 mm distance between columns 1690 mm stroke 105 mm throat 400 mm table height 960 mm total power requirement 6,5 kW weight of the machine ca. 3.450 kg dimensions of the machine ca. 2500x1800x2200 mm Duodpfx Aszip I Tjayow The machine is expressly sold defect as a source of spare parts

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2 x 2,0 t material thickness 0,4 - 3,0 mm coil internal diameter 460 - 530 mm coil external diameter 1500 mm material cross-cut 1200 mm² no. of straightening rolls 9 straightening roll diameter 30 mm speed 0 - 40 m/min power requirement 15,0 kW Weight 4,6 t Dimensions (WxDxH) 2,5 x 3,3 x 2,0 m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion Dusdpfxoy Rurvo Aayow - coil loop control via ultrasound

Condition: used, Year of construction: 1997, material width 300 mm coil weight 2 x 1,25 t Dujdpfsyx Iknsx Aayjw material thickness 0,4 - 1,2 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm no. of straightening rolls 9 straightening roll diameter 30 mm number of draw-in rolls 2 roll diameter 30 mm speed 3 - 30 m/min feed length 0 - 9999,9 mm power requirement 3,0 + 2,5 kW weight of decoiler 0,7 t dimensions decoiler (WxDxH) 2,1 x 1,4 x 1,5 mm weight of straightening machine 0,45 t dimensions straightener (WxDxH) 1,5 x 0,8 x 1,1 mm weight of the feeder 0,4 t dimensions feeder (WxDxH) 1,2 x 0,8 x 1,1 mm Universal straightening machine SC 12-FQ with infinitely variable drive double decoiler 2352 B-FPS WITHOUT drive, with hydraulic expansion, pneumatic lag brake electronic roll feed WAV-RDS-2Z, modell 1082 B with AC-Servomotor, pneumatic intermediate lifting of the rolls

Condition: used, Year of construction: 1987, material width 120 mm material thickness 0,2 - 4,0 mm no. of straightening rolls 19 straightening roll diameter 24 mm material cross-cut 2 - 120 mm² 40 mm Duedsynmpaspfx Aayow bending speed 5 - 25 m/min power requirement 2,5 kW weight 0,85 t dimensions (WxDxH) 1,2 x 1,7 x 1,6 SPECIAL DEAL as is where is, IN NEED OF OVERHAUL WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm Duodpfswc U Izox Aaysw speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2 x 2,0 t material thickness 0,4 - 3,0 mm coil internal diameter 460 - 530 mm coil external diameter 1500 mm Dujdpfjv Svaxjx Aayew material cross-cut 1200 mm² no. of straightening rolls 9 straightening roll diameter 30 mm speed 0 - 40 m/min power requirement 15,0 kW Weight 5,2 t Dimensions (WxDxH) 2,15 x 4,5 x 2,85 m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound

Condition: used, Year of construction: 1976, material width 400 mm coil weight 3,0 t coil internal diameter 460 - 560 mm coil external diameter 1500 mm material thickness 0,6 - 3,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm number of draw-in rolls 2 x 120 mm power capacity 5,0 + 1,5 kW dimensions decoiler (WxDxH) 2,5 x 1,4 x 2,4 m Djdevzxq Eepfx Aayouw weight decoiler 1,8 t dimensions straightener (WxDxH) 1,2 x 1,5 x 2,4 m weight straightener 1,3 t Straightening machine (type RS 67-04 / 0) with geared motor, driven lower straightening rolls, straightening rolls hardened and polished, straightening rolls individually manually adjustable, pneumatic intermediate lifting of the in-feed rolls, roller basket, coil loop control Decoiler (type BA 1-04/030) not driven, with lag break, manual centralized expansion, hydraulic snubber roll, lateral movement, hydraulic lifting table

Condition: used, Year of construction: 1984, material width 250 mm material thickness 0,2 - 2,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm run-in height 1250 mm speed 5 - 30 m/min power requirement 2,2 + 1,3 kW Weight 0,65 t dimensions (WxDxH) 1,05 x 1,25 x 1,5 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work Duodpfjvuk Sbjx Aayow free loaded to truck

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge coil loop control via ultrasonic Dusdpfx Ajvuugijayew cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Condition: used, Year of construction: 1996, material width 500 mm coil weight 2,5 t material thickness 0,2 - 3,0 mm coil internal diameter 480 - 530 mm coil external diameter 1300 mm material cross-cut 1000 mm² no. of straightening rolls 10 straightening roll diameter 80 mm Duedpfx Aaovut Rasyjw number of draw-in rolls 2 roll diameter 120 mm speed 20 m/min power requirement 4,0 + 1,1 kW weight of straightening machine 2,3 t dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm weight of decoiler 0,95 t dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm Straightening machine BRMS 4/500/10 with infinitely variable drive Decoiler BSH 3-500 with main motor for fix speed, ausiliary drive (declutchable), pneumatic snubber roll coil loop control via light guard video at seller's site before dismantling available

Condition: used, Year of construction: 1985, material width 500 mm coil weight 1,0 t material thickness 0,4 - 5,0 mm coil internal diameter 420 - 520 mm coil external diameter 1200 mm material cross-cut 1500 mm² no. of straightening rolls 9 number of draw-in rolls 2 Dodpfx Aaovut Hzeyouw speed 0 - 80 m/min Weight 1,70 t Dimensions (WxDxH) 2,7 x 1,3 x 1,9 m Weight 1,35 t dimensions 2,2 x 1,2 x 2,0 m Straightening machine with infinitely variable drive, intermediate lifting of the inlet rolls, hydraulic threading wedge Decoiler with auxiliary drive, hydraulic centralized expansion, snubber roll

Condition: used, Year of construction: 1994, material width 500 mm coil weight 3,0 t material thickness 0,2 - 2,5 mm coil internal diameter 470 - 530 mm coil external diameter 1400 mm no. of straightening rolls 9 straightening roll diameter 40 mm number of inlet and outlet rolls 4 material cross-cut 1200 mm² speed 1,5 - 30 m/min dimensions decoiler (WxDxH) 1,9 x 0,6 x 1,7 m weight decoiler 1,1 t dimensions straightener (WxDxH) 3,3 x 1,3 x 2,7 m weight straightener 3,0 t Dedpfx Aaevut Eqsyeuw - Straightening machine RYD 40 x 500 with infinitely variable drive (driven lower straightening rolls), straightening rolls individually adjustable by motor, supporting rolls, outlet roller basket - Decoiler DY 500 x 3000 with hydraulic auxiliary drive, pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, hydraulic insertion aid, hydraulic coil lifting device - coil loop control

Condition: used, Year of construction: 1971, material width 300 mm coil weight 2,0 t material thickness 1,0 - 5,0 mm coil internal diameter 440 - 520 mm coil external diameter 1320 mm no. of straightening rolls 6 straightening roll diameter 70 mm number of draw-in rolls 2 diameter of draw-in rolls 70 mm Dusdevut Dtspfx Aayew power requirement 1,1 kW weight of decoiler 2,0 t dimensions decoiler (WxDxH) 2,0 x 2,0 x 1,7 mm weight of straightening machine 1,3 t dimensions straightener (WxDxH) 2,7 x 1,3 x 2,4 mm Straightening machine RM-S 300 with infinitely variable drive, pneumatic intermittent lifting, hydraulic inlet table, bending roll, alligator opening, coil loop control Decoiler H 2 with auxiliary drive, pneumatic snubber roll, hydraulic expansion, manually shiftable

Condition: used, Tank rotating device, roll rotating device, welding rotating device, boiler rotating device Tank rotating device for welding pipes and tanks Manufacturer: PH Maschinenbau Type: PH-RBA 30000-SO AT01H424 Year of manufacture: 2002 Load capacity of the rotating device: 30 tons Rotational speed: 0 to 2 m/min Tank diameter: 500 - 7000 mm Roll spacing: 100 to 2500 mm Center distance between rolls: 500 to 2950 mm Roll diameter: 400 mm Roll width: 540 mm Motor power: 2 x 0.55 kW Power connection: 230 volts, 50 Hz - Infinitely variable speed adjustment via SEW frequency inverter - Cable remote control - Right and left rotation - Both roll pairs are driven - Rolls with 4 rubber tires each - Manual adjustment of the roll spacing via trapezoidal screw spindle - Rail-mounted chassis with drive, steel cast wheels with smooth roll surface Space requirement L x W x H: 3750 x 2100 x 1200 mm Weight: 3.2 t Good condition Dujdszin A Aepfx Aayew

Condition: good (used), overall weight: 13,000 kg, total width: 2,200 mm, total length: 8,000 mm, total height: 3,300 mm, Flanging and dishing machine BOLDRINI - RIBO 20HY/4000 BOLDRINI RIBO 20HY/4000 Hydraulic Flanging & Dishing Machine. Capacity up to Ø 4,000 mm. Suitable for manufacturing dished ends, pressure vessel heads and tank bottoms. Length:8000mm Width:2200mm Height:3300mm Weight:13000kg Dodpfxjzil H Ej Aayjuw Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2013, punching force: 31 t, sheet thickness (max.): 3 mm, travel distance X-axis: 1,250 mm, travel distance Z-axis: 1,300 mm, number of axes: 2, CNC punching machine manufactured in 2013. This Euromac MTX FLEX 12 hybrid features a maximum punching force of 30 tons and an X-axis stroke of 1250 mm. The Y-axis stroke is 1300 mm for multi-tool setups and 1250 mm for single-tool configurations. If you are looking to get high-quality punching capabilities, consider the Euromac MTX FLEX 12 hybrid machine we have for sale. Contact us for further details. Dujdpfx Aozil H Sjayow • Y-axis stroke: 1300 mm (multi-tool) / 1250 mm (single-tool)

Condition: good (used), Year of construction: 1999, functionality: fully functional, Pressing force: 220 kN Sheet metal thickness – max.: 8 mm Travel distance – x: 3000 mm Travel distance – y: 1500 mm Positioning speed, X-axis: 90 m/min Positioning speed, Y-axis: 60 m/min Positioning speed, simulation: 108 m/min Positioning speed, rotary axis: 360 °/sec Punching diameter: 76.2 mm Djdpfx Aaszil Dkeyjuw Workpiece weight: 150 kg Smallest programmable path dimension: 0.01 mm or 0.01° Tool stations: 15 pieces Tool change time: 1.5 - 6.5 sec Machine weight, approx.: 11,050 kg Dimensions: 6400 x 5800 x 2100 mm including setup cassettes including tool cabinet with tools including Quick-Set

Condition: good (used), functionality: fully functional, Year of construction: 2000, Motorized Swivel Bending Machine Manufacturer: HERA, Type: SM4 2500 x 6mm Year of manufacture: 2000 Technical data Duedpozilw Defx Aayjw Manufacturer: HERA Type: SM 4 Year of manufacture: 2000 Capacity: 2520 x 6 mm Upper die stroke: 450 mm Lower die adjustment: max. 80 mm Bending die adjustment: max. 100 mm Swivel range: 135° Connection value: 5.5 kW / 7.5 kW Operating voltage: 400 V / 50 Hz Control voltage: 230 V Dimensions: approx. L 3.90 x W 2.60 x H 1.85 m Weight: 6.7 t Equipment • Controlled back gauge 10-1000mm • Siemens S7/Simatic OP7 control system • Motorized bending die adjustment • Rail for die mounting H 95mm, L = 2,500mm, segmented • Clamping rail • Bending rails 20mm, 40mm The machine is in good condition. It comes from the workshop of a correctional facility. All information is without guarantee. An inspection while the machine is running is possible at any time in our showroom.

Condition: used, Year of construction: 1998, functionality: fully functional, Punching force: 165 kN Working area: 2070 x 1280 mm Sheet metal thickness: 6.4 mm Control system: CC 220 Workpiece weight: 150 kg Dujdpozilz Aofx Aayow Punching diameter: 76.2 mm X-axis: 80 m/min Y-axis: 55 m/min Machine weight, approx.: 8000 kg

Condition: good (used), overall weight: 42,000 kg, total width: 2,800 mm, total length: 12,400 mm, total height: 5,100 mm, BOLDRINI RIBO 30HY/6000 – Flanging & Dishing Machine Manufacturer: BOLDRINI (Italy) Dsdpfjzilu Aox Aayeuw Model: RIBO 30HY/6000 Type: Hydraulic Flanging & Dishing Machine Max. workpiece diameter: 6,000 mm Maximum plate thickness: 30 mm (cold forming) Year: 2002 Application: Dishing and flanging of tank heads, pressure vessel ends and dished ends. Length:12400mm Width:2800mm Height:5100mm Weight:42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, punching force: 20 t, sheet thickness steel (max.): 6 mm, punching diameter: 105 mm, workpiece length (max.): 1,000 mm, workpiece width (max.): 2,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Punching force: 20 t Sheet metal thickness (steel, max.): 6 mm Max. sheet metal dimensions: 1,000 mm x 2,500 mm Punching force: 200 kN Max. punching diameter: 105 mm Max. sheet metal thickness: 6 mm Max. stroke rate: 180 strokes/min Dodpozkvpasfx Aayjuw MACHINE DETAILS Mains voltage: 3 x 400 V / 50 Hz Connected load: 10 kVA Control voltage: 24 / 230 V Required fuse rating: 3 x 20 A

Condition: good (used), Year of construction: 2014, operating hours: 5,722 h, functionality: fully functional, machine/vehicle number: 379, punching force: 28 t, sheet thickness steel (max.): 6 mm, working range: 2,080 mm, punching diameter: 105 mm, workpiece weight (max.): 200 kg, overall weight: 9,200 kg, lifting height: 90 mm, input voltage: 400 V, repeat accuracy: 0.03 mm, For sale: a Boschert Compact 1000 Rotation, manufactured in 2014, serial number 379, located in Königsdorf/Bavaria (south of Munich). CNC punching/nibbling machine for sheet metal processing: – Punching force 28 t (280 kN) – Trumpf tool system (sizes 1–3, up to Ø 105 mm) – Rotating head: all tools can be rotated 360° continuously – Boschert CNC 32050 control with TFT operating panel, DXF import – Working area 1060 × 2080 mm, repositioning for long sheets – Sheet metal thickness up to 6 mm steel Meter readings taken directly from the control panel (photo in the advertisement): Dedpozkviaefx Aayouw – Machine running: 5,722 hours – Hydraulics running: only 1,285 hours – Stroke counter: 2.3 million strokes The machine has been used little and is currently operational – inspection with demonstration is possible on short notice after arranging an appointment. Video will be provided later. Tool inventory and documentation available upon request. Dismantling and loading will be carried out by the buyer or by arrangement. Payment must be made before collection. Sale as seen, excluding any warranty. Export possible. Quick and straightforward transaction – please include a callback number with your inquiry.

Condition: ready for operation (used), functionality: fully functional, sheet thickness (max.): 6 mm, GATTI SHEARING MACHINE 2000 X 6 MODEL 20/6 USED MACHINE INTERNAL CODE: SVR 375 Duedpfozkvafjx Aayow

Condition: used, Year of construction: 1993, 3 Rollers Bending Machine ZOPF TRENNJAEGER RS 302 ME Year of construction: 1993 Capacity: 1/4'' to 1 1/2'' - Ø 10 mm to Ø 60 mm Rectangular tube 50 x 30 x 3 Square tube 40 x 40 x 3 (see description on photo) Delivered with: 1 set of rollers 1'' - 6/4'' - 1 1/4'' + various (see photos) Voltage: 380 V Dusdpfx Aaezku Ibeyew Dimensions (L x W x H): 1000 x 1000 x 1600 mm Weight: approx 200 kg

Condition: used, Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Dujdpfx Aaezku Hwoyew Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T