Condition: excellent (used), Year of construction: 2011, operating hours: 32,000 h, operating speed: 9 mm/s, reverse speed: 90 mm/s, overall weight: 26,000 kg, pressing force: 400 t, table length: 4,100 mm, Equipment: CE marking, safety light barrier, High-Quality Used Bystronic XPERT 400x4100 CNC Hydraulic Press Brake For Sale Overview Available for immediate acquisition is a premium, Swiss-manufactured Bystronic XPERT 400x4100 CNC Hydraulic Press Brake. This down-stroke bending and folding machine is in exceptional condition, meticulously maintained, and fully prepared for heavy-duty precision fabrication. Bljdpfx Aszl D Efoknep Key Technical Specifications: Manufacturer: Bystronic Model: XPERT 400X4100 Bending Capacity: 400 Ton Bed Length: 4100 mm (4.1 Metres) Total; 4 axis - 2 axis back gauge Configuration: Extended daylight and extended stroke for versatile, large-capacity component handling Condition and Maintenance: Status: Excellent operational condition ("Very Clean") and in full working order. Service History: This machine has been fully serviced directly by Bystronic UK, ensuring adherence to original manufacturer standards and peak performance reliability. Control System: Equipped with a modern, high-precision Swiss-made Bystronic MMC Control for streamlined programming and operation.

Condition: used, Year of construction: 2002, For sale: a professional hydraulic guillotine, AMADA PROMECAM GX 630, manufactured in 2002. Reliable industrial guillotine shears designed for precise sheet metal cutting. Maximum cutting length: 3050 mm, steel thickness: up to 6 mm. The machine is connected and fully operational; it can be inspected, tested, and trial cuts can be performed. New cutting blades were replaced approximately two years ago. The guillotine cuts accurately and cleanly. Key Information: Manufacturer: AMADA PROMECAM Model: GX 630 Year of Manufacture: 2002 Serial Number: C020110 Working Length: 3050 mm Max. Steel Thickness: 6 mm Cutting Force: 197 kN Power: 5.5 kW / 7.5 HP Power Supply: 400–415 V / 50 Hz Current: 16 A NC Control and Back Gauge Bsdpfx Akjz A Amgsnslp The machine is equipped with an AMADA NC controller, allowing the operator to set the required cutting dimension and the number of cuts. The programmable back gauge, up to 1000 mm, automatically adjusts to the required position, making it convenient to perform repetitive cuts of the same size. Equipment: AMADA NC control system Programmable back gauge up to 1000 mm Hydraulic sheet clamping system Adjustable blade gap according to the thickness of the sheet being cut Front table extension for large sheets Front sheet support Foot pedal control New cutting blades, replaced approximately 2 years ago The machine is connected and fully operational; it can be inspected and tested. If you have any further questions, please do not hesitate to ask.

Condition: good (used), Year of construction: 2005, Used 2-meter CNC press brake from Amada Bodpj Aazxcsfx Aknolp Type: HFP 20 50 Capacity: 2050 x 50 tons Y1, Y2, X1, X1, R1, R2, Z1 and Z2 CNC controlled WILA NS hydraulic upper and lower clamping system Automatic Akas Fiessler safety system Year of manufacture: 2005 New computer in the control cabinet

Condition: good (used), Year of construction: 2008, Used 3-meter E Brake by Safan Type: E Brake 100 3100 TS1 Bjdpfxj Aazxie Aknelp Capacity: 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Wila hydraulic top clamp Adjustable crowning Year of manufacture: 2008

Condition: good (used), Year of construction: 2015, machine/vehicle number: 3131151803, Offer 26255 Bsdpj Af Igxsfx Aknslp Technical specifications: - max. working width 1350 mm - max. cutting capacity St 40 3 mm - cutting angle 2.30° - motorized back gauge 20 - 750 mm - sheet metal lifting, pneumatically assisted - rear guard with light curtain - front angle stop + support arms - stroke rate depending on cutting length up to 42 strokes/min - pneumatic connection 6 bar - drive 400 V / 7.5 kW - table height approx. 850 mm - electric foot pedal - space requirement including back gauge and rear guard, without front support arms - approx. W 1950 x H 1250 x D 1950 mm - weight approx. 1800 kg

Condition: new, functionality: fully functional, Year of construction: 2026, oil tank capacity: 90 l, overall weight: 1,800 kg, total length: 1,900 mm, total width: 1,350 mm, total height: 1,850 mm, power: 4 kW (5.44 HP), input voltage: 400 V, pressing force: 40 t, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, CNC PRESS BRAKE 40 t × 1320 mm – NEW, 2026 – IN STOCK 2-axis (Y + X) hydraulic press brake with touchscreen CNC control Compact, accurate hydraulic CNC press brake with 400 kN (40 t) pressing force and a 1320 mm working table. Built for sheet-metal workshops that need repeatable bends, a fast set-up and a small footprint. The machine has passed the manufacturer's final inspection (report dated 9 October 2026, result OK). KEY FEATURES • MTP-3212 touchscreen CNC controller with 2 controlled axes: Y (ram / bending depth) and X (motorised back gauge) • Back gauge with 500 mm travel, 0.1 mm positioning accuracy, driven by a ball screw (Taiwan SHAC) • Repeat positioning accuracy of the ram: 0.1 mm • Rexroth hydraulic system, American hydraulic pump and Parker seals • Siemens main motor, Schneider electrical components • Quick-clamp system for the upper tools, standard punch • Foot pedal with emergency stop SAFETY (CE) • Light curtain protection at the front • Full-size rear door with power-off when opened Bljdpfsyr N E Esx Aknsp • Large protective guards on both sides • Emergency stop on the control panel and on the foot switch • Electrical cabinet wired to CE standard TECHNICAL DATA • Nominal force: 400 kN (40 t) • Working table length: 1320 mm • Distance between uprights: 950 mm • Throat depth: 200 mm • Ram stroke: 90 mm • Open height: 300 mm • Controlled axes: 2 (Y, X) • Back gauge stroke: 500 mm, accuracy 0.1 mm, max. speed 100 mm/s • Ram speed: rapid 60 mm/s, working 15 mm/s, return 60 mm/s • Main motor: 4 kW • Voltage: 400 V, 3 phase, 50 Hz • Dimensions (L × W × H): approx. 1900 × 1350 × 1850 mm • Weight: 1800 kg (per nameplate) • Year of manufacture: 2026, new machine TERMS Available immediately from stock in our warehouse in Sokołów Podlaski. Price 8 900 EUR net (excl. VAT), EXW Sokołów Podlaski. 12 months warranty on parts. Documentation and operating manual included. Transport to any European destination – delivery quote on request.

Condition: excellent (used), Year of construction: 2015, Model Amada HFE MK2 5012 50 tons x 1250 , 4 axis CNC Press Brake Year 2015 Tonnage 50 tonnes Max. Bend Length 1250 mm Stroke Length 150 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 55L Motor Power 6KW Weight 2550 Kg guarding Erwin Sick machine mounted light screen,side and rear interlocked fencing Dimensions Machine Length 2000 mm Machine Depth 2300 mm Machine Height 2300 mm Distance Between Side Frames 1035mm Bodjyym Hkspfx Aknslp Beam width 60 mm Table height 960 mm Open Height 370 mm Throat Depth 100 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: M961287, overall weight: 17,000 kg, Herber 127 CNC in very good condition. The control system has been upgraded to "WinBoHerber". Bedpfxe Aax Uzj Aknjlp Year of manufacture: 1996 Capacity: Ø 127 x 5 mm Radius: min./max. 80/400 mm Bending speed / repeatability: 40°/s; ±0.1° Mandrel length: 4,000 mm Weight: 16,000 kg Machine dimensions: 7.0 x 2.2 x 1.8 m Motor: 40 kW Longitudinal feed: 900 mm/s Tolerance range: 0.05–0.1°/mm Tools are also included in the scope of delivery. Ø 50, radius 101.6 mm, folding smoother. On request, we also offer installation and training.

Condition: used, Year of construction: 1995, Max. bending capacity: 300 kN (30t) Pressure adjustable from 0-300 kN Bleds Aaz U Depfx Aknep Tool height: 300 mm Biegleistung:140 x 20 mm at V125; 200 x 18 (19) mm at V200 Automatic and manual mode possible Miscellaneous accessories and operating manual Weight: approx. 700 kg

Condition: used, sheet width 3100 mm Beds Aa A Hhjpfx Aknjlp plate thickness 6 mm stroke 160 mm rear stop 1000 mm total power requirement 5,5 kW machine weight ab. 6.500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, stroke length: 215 mm, reverse speed: 150 mm/s, pressing force: 150 t, table length: 4,100 mm, Equipment: CE marking, safety light barrier, 1 used, High quality fully serviced Bystronic Beyeler 4metre cnc pressbrake for sale Machine Specifications Manufacturer: Bystronic Beyeler Model: PR 150 (Pressure Reference) Year of Manufacture: 2006 Tonnage Capacity: 150 Tons Bending Length: 4100 mm (4 Metres) Hydraulic tool clamping CNC Control System: Cybelec Modeva Control Total Axis Configuration: 7-Axis (Back gauge: X, X1, R, Z1, Z2 + Beam: Y1, Y2) Key Features & Maintenance Advanced Crowning: Equipped with a hydraulic crowning system to ensure precise bending accuracy across the entire 4-metre bed length. Complete with tooling package as per photos Bjdpfezpxt Eex Aknolp Civil Work Savings: Free-standing design that requires no pit floor excavation, simplifying installation and relocation. Certified Service History: Fully serviced and maintained directly by Bystronic UK, ensuring optimal operational efficiency and reliability. Condition: High-quality, used, and fully serviced condition.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: PB11032, stroke length: 250 mm, throat depth: 400 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table height: 850 mm, oil tank capacity: 400 l, overall weight: 8,000 kg, total length: 3,500 mm, total width: 1,900 mm, total height: 2,600 mm, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 25 A, input frequency: 50 Hz, pressing force: 110 t, clearance between the columns: 2,600 mm, distance table to ram: 2,700 mm, ram plate length: 3,200 mm, ram plate width: 1,700 mm, table length: 3,200 mm, table width: 300 mm, type of input current: three-phase, Equipment: CE marking, safety light barrier, European technician service, installation, training Blodsz H Skvjpfx Aknjp No. Name Parameter Unit 1 Nominal force 1100 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2600 mm 5 Stroke 200 mm Dsc Arxfey U Hmgem Iswa 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 8+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA66T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, stroke length: 200 mm, pressing force: 100 t, Equipment: CE marking, safety light barrier, For Sale: Bystronic Xact 100 CNC Press Brake (3.1m x 100T) Available immediately: A exceptionally clean, well-maintained Bystronic Xact 100 CNC Press Brake (2012 Model). This free-standing, down-stroking machine offers precision 4-axis bending with automated crowning, making it an excellent addition to any precision fabrication facility. Detailed technical specifications and machine configurations can be verified through the Bystronic Official Group Website. Machine Overview & Configuration Control system: Equipped with a Cybelec DNC 880S Control unit. Axis configuration: 4-Axis control plus crowning (Y1, Y2, X, R + Manual Z). Safety systems: Integrated Fiessler Laser Guards for optimal operator protection. Guarding package: Features full rear sliding screen guards and side guards. Wandering foot pedal/pedestal controls. Technical Specifications Parameter Measurement Bending Capacity1000 kN (100 Tonne) Working Length3100 mm Distance Between Frames2550 mm Throat Depth400 mm Maximum Stroke200 mm Rapid Approach Speed100 mm/s Working Speed1 – 10 mm/s Bsdpfx Akszta A Aenolp Return Speed95 mm/s Overall Weight9000 kg Machine Identity Manufacturer: Bystronic Model: Xact 100Year of Manufacture: 2012 (Model Year 2012)

Condition: good (used), functionality: fully functional, Year of construction: 2003, Key parameters: Manufacturer: TRUMPF Maschinen Austria GmbH & Co.KG Model: TrumaBend V170 Year of manufacture: 2003 Pressing force: 1700 kN (170 tons) Max. bending length (working length): 4,080 mm Throat width (distance between side frames): 3,680 mm Max. stroke: 365 mm Stand clearance (cut-out): 410 mm Electrical and hydraulic parameters: Supply voltage: 3x400 V Frequency: 50 Hz Rated current: 46.3 A Total power consumption: 32.0 kVA Max. operating pressure: 340 bar Oil tank capacity: approx. 95 liters Hydraulic cylinder diameter: 190 mm Machine dimensions and weight: Total weight: approx. 18,000 kg Bledpfxs Acm E Ho Aknjp External machine dimensions (W x D x H): approx. 5,000 x 2,210 x 3,100 mm. The machine is offered without tooling.

Condition: used, Year of construction: 2014, pressure 170 t Bodpfx Ako Advb Hjnelp chamfer lenght 3050 mm distance between columns 2550 mm column arm 405 mm stroke of ram 400 mm distance between table / ram 320-720 mm feed down max. 220 mm/sec feed bending max. 10 mm/sec feed up max. 220 mm/sec connected load 27 kVA total power requirement 18,5 kW weight of the machine ca. 13.600 kg

Condition: good (used), Equipment: documentation/manual, emergency stop, foot remote control, swiveling upper roller, – Capacity: 1020 x 1 mm – Roller length: 1020 mm – Diameter of upper roller: 50 mm – Diameter of lower roller: 55 mm – Diameter of rear roller: 60 mm – Foot pedal operation Bodpfx Akj Af Ap Tjnslp – Emergency stop switch – Documentation – 400V

Condition: used, functionality: fully functional, Year of construction: 1976, control type: manual, degree of automation: manual, actuation type: electric, working width: 600 mm, sheet thickness (max.): 3 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness copper (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 3 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 5 bar, pressure (min.): 4 bar, pressure (max.): 5.5 bar, overall weight: 4,500 kg, total length: 3,000 mm, total width: 2,200 mm, total height: 1,800 mm, Equipment: centralized greasing system, MINO GIOVANI BATTISTA Circular Shears for Cutting Steel Sheets 600 mm x 3 mm – used Coil Slitting Line – MINO GIOVANI BATTISTA + Strip Straightener MINO GIOVANI BATTISTA Max. sheet thickness: 3 mm Max. cutting width: 600 mm Knife sets (more than 50 pieces) Inner coil diameter: 400–550 mm Outer diameter: up to 1,500 mm Max. coil weight: up to 5 tons Decoiler and recoiler with spacers Technical Data Drive type: electric Working width: 600 mm Max. sheet thickness: 3 mm Max. steel thickness: 3 mm Bledpfx Akjyn Shzjnop Power: 22 kW (29.91 HP) Connection voltage: 380 V Frequency: 50 Hz Total weight: 4,500 kg Total length: 3,000 mm Total width: 2,000 mm Total height: 1,800 mm Equipment • Centralized lubrication system • Pneumatic coil removal from decoiler • The machine is powered and currently installed in production Included Free of Charge Along with the circular shears, we provide a sheet metal cold rolling machine free of charge for achieving tight thickness tolerances. MINO GIOVANI BATTISTA – Rolling Machine Model: LAS Power: 6 kW Weight: 4,500 kg Cold rolling machine (for tight tolerances) Max. material width: 130 mm Max. material thickness: 3 mm Decoiler, belt-driven power transmission Prices Circular shears: EUR 11,000 Rolling machine: EUR 3,500 The rolling machine is included in the package at no extra charge, as it was used together with the line. Disassembly and loading costs: EUR 1,800 Delivery Terms Parity: EXW 10290 Zaprešić – Croatia Loading space length: 6 m Width: 2.2 m Total weight approx.: 9 tons Prices are net of VAT – reverse charge Delivery Time The machine is available 10–15 days after payment. The fixed loading date must be announced at least 7 days in advance for organizing forklift and crane.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, table width: 1,300 mm, travel distance X-axis: 2,550 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 3,500 kg, door opening width: 2,600 mm, door opening height: 1,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 3kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as is first-class service. Blodpsxa Ahnofx Aknop Please also note our attractive leasing/hire purchase offers. - Machine without automatic exchange table - very space-saving - extremely energy-efficient cutting system - requires only approx. 4 x 4.0 meters of installation space - 3kW laser source from MaxPhotonics (G5) suitable for aluminum - Top quality, arrange a viewing now! Cutting of steel sheet up to 22mm Cutting of stainless steel sheet up to 10mm Cutting of aluminum sheet up to 10mm Cutting of brass sheet up to 6mm - Travel range 1260 x 2550mm (for medium format) - Machine control in German - Safety light curtain for maximum operator protection - Extensive collision protection measures for the cutting head - Large laser protection window for observing the cutting process - 3-gas switching (compressed air, nitrogen, oxygen) - Extensive cutting parameter file - incl. nesting module - very easy to operate - powerful laser cooler - Machine control in German - German service and spare parts supply - powerful laser cooler - Filter extraction system available as an option (5.5kW with frequency converter for pleasantly quiet operation) The following options are also available: - Automatic nozzle changer (optional) - Automatic nozzle centering (optional) - Raw material detection and part nesting via CypVision camera system (optional) - Import of 3D files (.stp) and unfolding (optional) - Direct import of SolidWork, SolidEdge, Inventor, etc. (optional) - Nesting, calculation, scrap plate management, etc. (optional) - ERP system can be combined with all your other sheet metal processing machines (optional) Leasing or hire purchase is possible via our financing partner. Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Length: 4.0m Height: 2.3m Width: 4.0m Total weight: approx. 3500kg Do you need a different laser power, table shape or table size? No problem. I will gladly create a suitable offer. e.g. 2kW machine from 29,990 euros Are you not sure which laser power is suitable for your application? Of course, I will carry out cutting tests according to your requirements. There are many possibilities here.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 97700 € 1846.53 € 2550 mm 15 mm 15 mm 13 mm 12 mm 12 mm 10 mm 270 mm 270 mm Bledpfx Akeypbp Djnep 230 mm 50 mm 1155 mm 15 kW 4760 mm 1660 mm 1155 mm 8950 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 107000 € 2022.3 € 3100 mm 13 mm 12 mm 8 mm 13 mm 10 mm 10 mm 8 mm 270 mm 270 mm 230 mm 50 mm Bjdjypbqhspfx Aknjlp 1155 mm 15 kW 5310 mm 1660 mm 1590 mm 10050 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 50500 € 954.45 € Blodpfewiqxcex Aknjp 3100 mm 10 mm 6 mm 50 mm 13 1/min 1.5 ° 16 22 to 1000 mm 200 mm/s 22 kW 200 l 2 Stk. 865 mm 580 mm 3515 mm 4200 mm 2250 mm 3600 mm 2100 mm 9300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules WE HAVE MORE THAN 850 REFERENCES!

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 62500 € 1181.25 € 40 to 1250 mm Y1 / Y2 / X und R Achse 200 mm 1050 mm 250 mm 440 mm servomotorischer Spindela 115 mm/s 10 mm/s 115 mm/s 650 mm 250 mm 1000 mm 7.2 kW 1950 mm 1450 mm 2650 mm 3600 kg servomotorized spindle drive Blsdpfoynm Ayjx Aknjp 4 axes (Y1, Y2, X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws quick release upper tool clamping upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components OPTIONAL EQUIPMENT (PRICES ON REQUEST): Z1/Z2-axes CNC control DELEM DA-66S or DA-69S

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 112500 € 2126.25 € 3100 mm 16 mm 16 mm 13 mm 16 mm 14 mm 12 mm 300 mm 300 mm 240 mm 50 mm 1140 mm Bledpfxoynm Hfo Aknsp 18.5 kW 5310 mm 1660 mm 1140 mm 11100 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, operating hours: 300 h, machine/vehicle number: C15_20250015, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, pressing force: 44 t, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Bjdpfx As Ad Acdoknelp Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, operating hours: 300 h, machine/vehicle number: C15_20250016, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, pressing force: 44 t, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Bjdpfe Ad Acksx Aknolp Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!