Condition: excellent (used), Year of construction: 2016, operating hours: 2,133 h, functionality: fully functional, working range: 4,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, table length: 4,000 mm, pump pressure: 4,000 bar, INTERMAC Primus 184 Metalworking machine, 3 axes, 4000 x 2000 mm (4000 x 1860 mm effective cutting area), year 2016. Operating hours: 2133. PC upgraded in 2022 with SSD replacing the hard drive. Maintenance performed as per schedule, plus seal/gasket and BFT pump replacement by BFT technician in 2022 (not recorded in the list). Machine is fully operational, and video of the machine in operation can be provided. The machine can be inspected at our client’s facility in the Veneto area. Itedpoyvh Afsfx Ahvsd

Condition: new, functionality: fully functional, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bochu (FSCUT), controller model: FSCUT 2000 + Tube system, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus RFL-C6000 (6 kW), laser power: 6,000 W, laser wavelength: 1,064 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 10 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 850 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 30 m/min, cutting speed: 60,000 mm/min, positioning speed: 120 m/min, workpiece weight (max.): 900 kg, input voltage: 380 V, type of input current: three-phase, type of cooling: water, overall weight: 8,500 kg, total length: 9,000 mm, total width: 4,500 mm, total height: 2,300 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, Description Itjdpeyvhm Rofx Ahvjd Fiber laser cutting machine FT62 with 6 kW power designed for cutting sheet metal as well as tubes and profiles. The machine is equipped with a 1500 × 3000 mm working table and a tube cutting module for tubes up to 6000 mm in length. Tube diameter range is Ø20–Ø220 mm and square profiles from 20 × 20 to 220 × 220 mm. The machine uses a Raycus 6 kW laser source, WSX cutting head and FSCUT CNC control system (Bochu). Thanks to Inovance servo drives, precision linear guides and rack drive, the machine ensures positioning accuracy of ±0.03 mm and repeatability of ±0.02 mm. The machine features a full protective enclosure, exchange working table, smoke extraction system, Tongfei 6 kW water chiller and 80 kVA voltage stabilizer. Maximum positioning speed is 120,000 mm/min. Technical specification Parameter Value Model FT62 Laser power 6 kW Laser type Fiber laser Laser source Raycus Cutting head WSX Control system FSCUT (Bochu) Working area 1500 × 3000 mm Max tube length 6000 mm Tube diameter Ø20 – Ø220 mm Square profiles 20 × 20 – 220 × 220 mm X axis travel 3000 mm Y axis travel 1500 mm Positioning speed 120,000 mm/min Positioning accuracy ±0.03 mm Repeatability ±0.02 mm Cooling Tongfei 6 kW chiller Power supply 380 V / 50 Hz Construction full enclosure + exchange table Dust extraction smoke extraction system Voltage stabilizer 80 kVA Certification CE Optional equipment Option Price Industrial dust collector 7.5 kW approx. 39,000 PLN Tubest software (tube cutting) approx. 12,200 PLN Cypnest software (nesting) approx. 4,600 PLN Rotary unit left/right change approx. 1500 USD The machine can be configured according to the customer’s requirements. Laser power can be adjusted to individual needs: 3 kW, 6 kW, 12 kW.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: C070024, control type: CNC control, actuation type: hydraulic, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, back gauge: 1,000 mm, Equipment: type plate available, AMADA Model GX 11 840 8 mm x 4050 HYDRAULIC Year of manufacture: 2007 Programmable CNC shear Steel thickness: 8 mm Stainless steel thickness: 6 mm Aluminum thickness: 10 mm Cutting length: 4050 mm Motorized backgauge: 1000 mm Pneumatic sheet support Side gauge: 1.5 m Iedpfoyvhnbsx Ahvetd Serial number: C070024 Hydraulic hold-down Automatic blade gap adjustment Automatic variable cutting angle adjustment Shadow line indicator – standard Central lubrication – standard Stroke counter – standard Adjustable stroke Motor: 16 kW Weight: 11,530 kg Spare blades

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: manual, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 5 mm, bending angle (max.): 180 °, input voltage: 400 V, input frequency: 50 Hz, Equipment: emergency stop, It is a machine from 2018 and we used very little. We can bend pipe from 18 mm - 60 mm Machine cost new 2018 was ca 45.000,00 EUR and tools was ca 55.000,00 so total was EUR 100.000,00 Iedpeyvhl Hefx Ahvetd

Condition: ready for operation (used), Year of construction: 1991, Immediately available ex works: CNC press brake Amada Promecan Model HFBO 125/40 Year of manufacture: 1991 Control system renewed in 2024 Delem DA 58 control Pressing force: 125 t Working length: 4200 mm Iodpfxoyvg Uye Ahvotd Frame gap: 2700 mm Throat depth: 410 mm Stroke: 180 mm Drive: 11 kW Working speed: 8 mm/s Weight: 10 t Many tools included Price: EUR 10,500— plus VAT, ex works

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Universal profile steel shear with punch station Peddinghaus Type 210 / 16 Year of manufacture: 1977 Press force: 60 t Punch: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90°: 130 x 13 mm L profile 45°: 100 x 11 mm T profile 90°: 130 x 15 mm T profile 45°: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Priced at €1,750 plus VAT ex location Isdpfsyvg Utsx Ahvotd

Condition: ready for operation (used), Year of construction: 1992, Hydraulic Section Steel Shear Peddinghaus Hydraulic machine with 5 stations for punching, notching, shearing flat steel, angle steel, and solid material; punch actuation by hand lever; section steel shear operated by foot switch. Punch depth: 510 mm Pressing force: 60 t Throat depth: 510 mm Shearing capacity: 500 x 12 or 400 x 16 mm Punch diameter: 27 mm in 17 mm Punch diameter: 39 mm in 12 mm Round steel: 45 mm Square steel: 40 mm Isdpfx Ahsyvg Umjvstd Angle steel: 120 x 13 mm Flat steel: 500 x 12 mm Drive: 7.5 kW Oil capacity: 80 liters Weight: 3 t Price: EUR 3,750 plus VAT, ex works

Condition: ready for operation (used), Year of construction: 1978, Available immediately from location: LVD Hydraulic Guillotine Shear Type MVS 62/4 Year of manufacture 1978 Cutting length 6200 mm Material thickness 4.0 mm Digital backgauge 750 mm Drive 12.5 kW Ijdpfxeyvg Uge Ahvetd Weight 7500 kg Price: €5,500 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1981, Immediately available ex-location: Hydraulic Guillotine Shear Köllschen Type BSH 2000/12.5 Year of manufacture: 1981 Cutting length: 2050 mm Material thickness: up to 12.5 mm Electric backgauge: from 5 to 1000 mm Drive power: 15 kW Weight: 11 t At a price of EUR 3,750 plus VAT ex location Isdpjyvg Uaofx Ahvstd

Condition: used, Year of construction: 1986, L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm Itjdst D Nz Ajpfx Ahvod shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: new, bending length: 2100sheet thickness: 45prebending: 35Upper Roll Diameter: 430Side Roll: 390motor: 30messurements (LxWxH): 5200 x 2200 x 2500weight approx.: 19000 Technical specifications: - Hardened and polished rolls Itodpfoytyy Nsx Ahved - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered

Condition: used, Year of construction: 2011, Sheet metal guillotine HANS SCHROEDER MASCHINENBAU GmbH 529-40/6.5 Isdpsyvfu Djfx Ahvjtd

Condition: ready for operation (used), total length: 9,000 mm, total width: 4,300 mm, total height: 3,050 mm, empty load weight: 190,000 kg, top side rolls hydraulicaly driven 110 HP on top roll Extra top roll included, dia 660 mm Hardened rolls treated with 50-NI-CR-No 7 Clamping force: 1000 ton Conical bending Electro mechanical control Max open between rolls: 205 mm Foundation needed: 10 500 x 5300 x 2400 mm Itjdoytyrlopfx Ahvsd Number of rolls: 4 Roll capacity cold: 3100 x 125 mm Roll capacity warm: 3100 x 180 mm Type: hydraulic Roll dia upside: 850 mm Dia under roll - side rolls: 850 mm - 720 mm Driven rolls: 3 driven rolls Power needed: 230 HP total

Condition: ready for operation (used), controller manufacturer: 2D Touch, throat depth: 1,255 mm, installation height: 1,600 mm, operating speed: 9 mm/s, reverse speed: 85 mm/s, total length: 16,835 mm, total width: 5,695 mm, travel distance Z-axis: 900 mm, empty load weight: 370,000 kg, load capacity: 2,000,000 kg, passage width: 12,470 mm, table width: 800 mm, 9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunen Capacity: 2000 ton x 14 meter Ijdpeytyp Rsfx Ahvotd Backgauge: CNC Locking speed: 77 mm/sec Electric motor (power): 2x 90 kW Height: 6750 mm (above floorlevel) Bending length: 14 000 mm

Condition: ready for operation (used), controller manufacturer: AMNC-PC Touch, throat depth: 420 mm, installation height: 470 mm, operating speed: 10 mm/s, total length: 5,840 mm, total width: 3,000 mm, total height: 2,900 mm, power: 9 kW (12.24 HP), travel distance Z-axis: 200 mm, empty load weight: 11,300 kg, passage width: 3,760 mm, table width: 180 mm, 7 assen: Y1 / Y2 / X / X2 / Z1 / Z2 / R Amadabombeertafel met Digipro-optie: CNC-buighoekmeetsysteem Sick laserbeveiliging aan de voorkant Plooimessen in een gereedschapskast: • 00300 – 60° - R6.0 2x 835 • 04706 – 88° - R0.6 4x 835 • 05206 – 88° - R0.6 10, 15, 20, 40, 50, 100R, 100L, 200, 300 • Z24511 – 45° - 0,37° 4x 835 • Z24512 – 45° - 0,37° 415 Ijdpfx Aoytyqbshvetd • Z24513 – 45° - 0,37° 10, 15, 20, 40, 50, 100L, 200, 300 • 45308 – 88° - R0.8 10, 15, 20, 40, 50, 100R, 100L, 125, 138, 200, 270, 300, 310, 370, 835 Buigmatrijzen in een gereedschapskast: • 07900 – 88° - V20 4x 835 • 07980 – 88° - V20 10, 15, 20, 40, 50, 100, 200, 400 • 07700 – 88° - V16 4x 835 • 07780 – 88° - V16 10, 15, 20, 40, 50, 200, 400 • T12451 5x 835 • 129001 5x 835 Capacity: 130 ton x 4100 mm Backgauge: CNC Locking speed: 200 mm/sec

Condition: ready for operation (used), throat depth: 600 mm, installation height: 600 mm, operating speed: 7 mm/s, reverse speed: 46 mm/s, travel distance Z-axis: 300 mm, passage width: 5,050 mm, table width: 300 mm, Twee kantbanken van 6 meter kunnen samenwerken om materiaal van 12 meter te buigen. Kantbanken kunnen volledig worden gedemonteerd, zodat ze in containers kunnen worden vervoerd. Capacity: 1200 ton x 12 meter Backgauge: CNC Iodpfx Ajytyqnjhvstd Locking speed: 80 mm/sec Electric motor (power): 2x 44 kW Weight: 124 ton (2x 62 ton)

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2752, throat depth: 315 mm, sheet thickness (max.): 2 mm, overall weight: 480 kg, Equipment: emergency stop, We offer this used Prinzing SME 80/3P beading & flanging machine, year of manufacture 2006. Manufacturer: Prinzing Itedpjyvd Ucjfx Ahvjd Model: SME 80/3P Year of manufacture: 2006 Condition: used Category ID: 1051 Type ID: 949 Machine type: beading & flanging machine Powered adjustment of the upper roller Motorized drive, single-stage, two-stage or infinitely variable Program start via foot switch PLC control All tools for rounding and beading are included If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, Used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Laser TrueFlow 2000 with laser power: 100-2,000 watts Ijdpfxjwkd Efj Ahvotd NC operating hours: 41,804 Resonator hours: 14,466 Beam-on hours: 2,054 Y-axis: 1,300 mm Additional equipment: various tools Recently installed new parts: Conversion to TASC5 laser control (01/2025) Control panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Condition: ready for operation (used), Year of construction: 2014, overall weight: 6,100 kg, cutting length (max.): 2,500 mm, CNC shearing machine manufactured in 2014. This DERATECH Practica CNC features a maximum cutting length of 2500 mm and can handle a maximum sheet thickness of 6 mm. Weighing 6100 kg, this machine is designed for durability and efficiency. If you are looking to get high-quality shearing capabilities, consider the DERATECH Practica CNC machine we have for sale. Contact us for further details. • Voltage: 3 × 400 V Iedpsytqfiofx Ahvjtd • Power: 7.5 kW • Frequency: 50 Hz • Maximum sheet thickness: 6 mm • CE marking: CE

Condition: good (used), functionality: fully functional, Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Control: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 Itodpfx Ajytpimshvjd + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line

Year of construction: 1991, condition: ready for operation (used), Working width: 4040mm, max. sheet thickness steel/stainless steel: 5mm/3mm, back gauge: 1000mm, weight: approx. 7000kg, control system: Elgo, working hours: approx. 22051h. An on-site inspection is possible. Ijdpfx Aeyu T Ebehvotd

Condition: used, functionality: fully functional, Year of construction: 2006, roller (top) diameter: 420 mm, roller length: 3,000 mm, sheet thickness (max.): 60 mm, sheet thickness steel (max.): 60 mm, number of digital displays: 1, Equipment: centralized greasing system, cone bending device, emergency stop, hardened rollers, swiveling upper roller, We are offering this used Birlik sheet metal rolling machine, year of manufacture 2006. Itodpfeyu Tm Sox Ahvsd If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Used special-purpose plant, built by ECKOLD (Special machine with superstructure for punch rivet brackets) Custom-built as a component feeder. Pictures of the components and motors. Motor brand: Behncke, 5.5 kW Rated power: 8.5 kW Hydraulic unit brand: FluTec, year 1999 Itodpfx Ahjyu S S Hsved

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 24,184 h, machine/vehicle number: A0230A1546, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser hours: 24,184 h, laser power: 5,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 12 mm, table length: 3,000 mm, table width: 1,500 mm, Equipment: CE marking, cooling unit, documentation/manual, The machine has been serviced by TRUMPF under a maintenance contract. The machine can be inspected in operation in Budapest, and prompt collection is possible. Ijdoyu S Ihopfx Ahvotd

Condition: new, Fully automated roof tile profiling machines available in various sizes and designs. Our range includes over 60 roof tile patterns. Delivery time and machine configuration are determined individually for each order. Please contact us for further information and technical documentation. Ijdpeyu Sz Iofx Ahvjtd