Condition: used, Year of construction: 1988, sheet width 3100 mm plate thickness 13 mm distance between columns 3150 mm back stop - adjustable ja mm connected load 33 kW weight of the machine ca. 16,0 t dimensions 4,0 x 2,3 x 2,25 m Hydraulic shearing machine with -back gauge with positioning control Delret Tqigjh N Nhout -adjustable cutting gap -adjustable cutting angle -illuminated cutting area -3 sets of spare knifes -modernized to Siemens S7

Condition: used, Year of construction: 1997, sheet width 1290 mm plate thickness 2.0 mm Sheet thickness / Pre-Bending 2.0 mm roll length 1290 mm speed ca. 4.0 m/min roll diam. toproll 82.0 mm roll diam. bottom roll 82.0 mm Roller diameter / side roller 82.0 work height max. ca. 850 mm total power requirement 2.0 kW weight 440 kg range L-W-H 1950 x 550 x 960 mm From a maintenance workshop Good condition (!!) Universal machine for medium to high production loads, suitable for most applications. Motor-driven with cambered rollers mounted in needle bearings. The upper and lower rollers are adjusted via a handwheel and worm gear. The upper and lower rollers are driven by a worm gear. The entire drive is housed on one side of the machine, resulting in a remarkably compact design. Features: Duolrh N Njv Uccfohjt - Robust motorized roll bending machine for single and series production - Asymmetrical roller arrangement - Electrically driven upper and lower rollers - Manually adjustable upper roller - Manual lower roller adjustment via handwheel * Adjustment range approx. 25.0 mm - Manual side roller adjustment via handwheel * Including analog position indicator * Adjustment range approx. 55.0 mm - Including conical bending device - 1x double foot switch for left and right operation

Condition: like new (used), Year of construction: 2013, cutting length 1060 mm cutting angle 2 ° no. of strokes 50 Hub/min engine output 4,0 kW weight of the machine ca. 0,67 t Motorised guillotine shears type 165.03 Technical data: Duolrheua Iulo N Nhot Working width (cutting length): 1060 mm Max. sheet thickness to be cut: 2.5 mm at 400 N/mm² Machine stroke rate approx.: 50/min Cutting angle: 2° Opening width hold-down device: 5 mm Factory setting cutting gap 0.1 mm - Digital display for backgauge - Front table support - Operating instructions available

Condition: good (used), Year of construction: 1997, operating hours: 30,000 h, Functionality: fully functional, machine/vehicle number: 5820387, punching force: 30 t, total height: 2,000 mm, total width: 5,000 mm, total length: 15,000 mm, sheet thickness steel (max.): 8 mm, working range: 3,000 mm, type of input current: three-phase, travel distance X-axis: 2,500 mm, Amada VIPROS 358 KING + LKI L III 250 automatic loader + PR III automatic unloader + noise protection cover . It can work complete automatic , also sorting your parts on the pallet . The machine was verry well mentained , we bought this machine and did not finish installation because we bought a new machine . The machine has SICK light barriers and original protection fences . Duolsvb Dn Aorh N Nhst For more informations please contact me . CNC AMADAN 04 P-C N. 2 pneumatic punches Brush table for low noise operation & scratch free processing Device for automatic repositioning of the sheet metal Air Blow automatic tool lubrication

Condition: new, Horizontal bending machine Fastech FP 20 Description - Pressure: 20t - Stroke: 185mm - Max. tool height: 200mm - Flat bar over high edge: 200 x 12mm - Working speed: 10,0mm/sec - Return speed: 10,0mm/sec - working height: 930mm - table: 480 x 1060mm - total power requirement: 2,2kW - Motor: 400 Volt 50Hz - weight: 530kg - dimension L-W-H: 1150 x 480 x 1200mm - Oil capacity: 12,0l Equipment: - Hydraulic horizontal bending machine - Solid working surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x set of tools - Double foot switch Djlrh N Nefg Evdehsut

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, Amada CNC-controlled punch-nibbling machine, type Vipros 368 KING equipped with MP 300 M and PR 300 loading and unloading systems Delov Ubgvorh N Nhsut The machine is in very good condition and available from week 17

Condition: good (used), Hydraulic Notching Machine (used) Manufacturer: Apollo Type: TF 230 Blade length: 230 mm x 230 mm Dueljwb Scyorh N Nhet Cutting capacity: 6 mm mild steel Cutting capacity: 4 mm stainless steel Strokes per minute: 95 Table size: 1000 x 710 mm Cutting angle: 90 degrees Drive power: 4.4 kW Weight: approx. 1000 kg Space requirement: L 1100 mm, W 1000 mm, H 1500 mm 2 angle stops Foot switch Operating manual The machine is in very good condition and ready for immediate use. Forklift available, free on truck Favourable shipping available Machine location: 59510 Lippetal

Condition: new, Year of construction: 2025, Functionality: fully functional, The EVO is the latest innovation in sheet metal processing. It is equipped with numerous innovative and patented features that increase your production capacity and productivity, while offering the lowest total cost of ownership. The high-quality components used in this machine, as well as the latest version of the BENDtronic® control system, which is installed as standard on all EVO machines, are particular highlights. HAEUSLER EVO 21015 4-Roll Bending Machine / Roll Bending Machine Manufacturer: Haeusler Dslov Uac Ajrh N Nhout Type: EVO 21015 4-Roll Bending Machine / Roll Bending Machine Origin: Germany / Switzerland Condition: NEW, Display Machine Availability: 12-14 weeks Capacity: Working width 2100 mm Rolling capacity 12 mm Pre-bending capacity 9 mm Standard Equipment: • Variable swing arm adjustment of the side rollers VSA® • HAEUSLER Hybrid Drive System HHDS® • Movable 21.5" touchscreen control panel including high-end BENDtronic® control • Continuously adjustable rotation speed between 0 and 8 m/min • Machine prepared for remote maintenance • Electromechanical holding system for the rotation of the upper roller • Automatic pressure adjustment of the lower roller • Automatic pressure compensation of the Bottom roll cylinders: Standard cooling system for ambient temperatures up to 35°C • Automated axis optimization • Automatic hydraulic shutdown for roll positioning • Ultra-compact design to reduce or even eliminate foundation costs • Safety ripcord Optional equipment: • Two-roll drive for the top and bottom rolls • Cone bending device for bending conical workpieces • Advanced cooling system for ambient temperatures up to 45°C • Top support for easier bending of large diameters • Side support for assisting with bending of large diameters • Gas pressure accumulator for calibrating previously welded cylinders • BendIT-Office workstation software • Autonomous bending • Machine prepared for quick top roll changes • Interchangeable top rolls with different diameters for bending small-diameter sections • Hardened rolls for bending black and stainless material • Infeed roller conveyor for easy sheet feeding into the machine • Centering device for the infeed roller conveyor, for automatic centering of sheets before bending Not the right machine? As a Haeusler representative, we can customize and offer you the machine you need. Don't hesitate to contact us.

Year of construction: 1998, Condition: good (used), Manufacturer: LIV Delrh N Nji D Dxyjhjut load capacity: 2x2t maximum plate width: 310 coil inner diameter: 380-460 mm max. reel outer diameter: 1200 mm

Condition: good (used), Year of construction: 1993, machine/vehicle number: 308, For one-sided loading and unloading, with a large stop plate and brake. The machine will be repaired, tested, and cleaned by a specialist and will then be fully functional. A test run will be performed. Sheet width: 1000 mm Duelrh Nsv T Tl Ie Nhot Coil weight: 1000 kg Color: blue/yellow Machine weight approx.: 350 kg Space required: 800 x 1800 x 1400 mm Coil width: 1000 mm Clamping range up to: 510 mm Load capacity: 1000 kg

Condition: new, Fastech 3-roll round bending machine FRS-S 2050 x 190 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment motorized bottom roll adjustment 2 x digital display sheet width 2050 mm sheet thickness 7,0 mm max. Delrhjhzq D Us N Nhout sheet thickness 6,0 mm bending roll length 2050 mm roll diameter 190 mm smallest bending diameter 285 mm weight 2.695 kg dimension L-W-H 3600 x 1100 x 1200 mm Motor:4 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operation panel safety line values apply to St-37 / 240 N/mm² CE mark

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, loading capacity: max. 3.000 Kg. Duoljtzwxwsrh N Nhot table diameter: 1.600 mm strip metal width: max. 150 mm

Condition: good (used), load capacity: 200 kg material width: 200 mm coil inner diameter: 240-500mm Dolrhjihvdro N Nhout Coil outer diameter: 1200mm

Condition: good (used), Year of construction: 1982, Functionality: fully functional, Equippment: Djlrotqf Iqoh N Nhout 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 3 Standard slide units 1 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: good (used), Movement range: 600mm Platform size: 800x800mm Pedestal height: 870 mm Duslrspy Dtxsh N Nhst

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, Two-point-eccentricpress for BIHLER GL 3000, Dolrst N Uwmeh N Nhjut complete with press table, drawbars and fixing unit press force: 300 kN stroke: 16 mm

Condition: good (used), Maximum inner reel diameter: 1300 mm Min. inner reel diameter: 700 mm Delrh N Neik E R Uehsut maximum reel width: 700 mm

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 70 kN 3 Narrow slide units 1 Control shaft Duolrotmtzkjh N Nhet Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: good (used), Manufacturer: LIV load capacity: 2x2t maximum plate width: 310 Duolrhei Azy Ho N Nhot coil inner diameter: 380-460 mm max. reel outer diameter: 1200 mm

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Original BIHLER width slide units for BIHLER MC 42 / RM 40 Duolsticggjrh N Nhet 2 pcs. Bihler-No. 174-04-0044.0 complete with central lubrication system 1 pce. Bihler-No. 142-04-0347.0 complete with central lubrication system 2 pcs. Bihler-No. 142-04-0229.0, complete with central lubrication system

Year of construction: 1998, Condition: good (used), Manufacture: LIV Load capacity: 2x2t Duslrei D D Eujh N Nhst max plate width: 310 coil inner diameter: 380-460mm Max roll outer diameter: 1200mm

Condition: excellent (used), Year of construction: 1992, *complete with Ciller* Power voltage: 400 V, 50 Hz. Power requirement: max. 250 A Duolrh N Noh U H U Tjhet

Condition: good (used), Pre-stroke: Duolelz I Hbsrh N Nhst ALBA Type Mvhy 50 sheet metal straightening: Georg SKB With complete documentation!

Condition: good (used), Feed: Manufacturer: ALBA Tip: AVS 400 Belt straightening: Manufacturer. George Type: SBK 2 Dolrhelz I R Rj N Nhsut Double straightening and feed line!!! With complete documentation!!

Condition: good (used), Number of straightening rolls 5 sheet width 430 mm Sheet thickness 1 mm Top roll diameter 2 Top rolls - Ø 60 mm Bottom rolls diameter 3 Bottom rolls - Ø 60 mm Dujlrhsgvl U Ro N Nhst