Used veneer presses for sale (137)

Condition: used, Year of construction: 2007, Heating plate press Manufacturer: OTT Type: Solid 16-32 Year of manufacture: 2007 Technical data Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Iisdpfx Aozuzxnjbnsf

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. Iiedpfx Aozuzw Dsbnjf PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: as good as new (ex-display), total pressing surface 2550 x 1350 mm total pressing force 900 KN (=80 MP) specific pressure force 2,6 daN/cm² (kp/cm²) 4 cylinder 80 mm diameter 400 mm stroke operating pressure 355 bar Iodpfx Abs T R Nhonsif anodized heating platens, tooth rack guidance

Condition: used, Year of construction: 1987, machine/vehicle number: 17080987, input voltage: 380 V, table length: 2,500 mm, total width: 1,300 mm, year of last overhaul: 2024, Equipment: documentation/manual, We are offering this used Italpresse BN-25-F veneer press, manufactured in 1987. It has been inspected and overhauled in 2024 and is SKH certified. It features two-hand operation and an emergency stop. If you have any questions or would like more information, please feel free to send us a message or call us. Iijdpfx Aezu A Azjbnef

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Veneering press equipped with automatic loading/unloading. Manufacturer: SCM Group (division SERGIANI) Model: SERGIANI GS-A 6/120 30-13 PM Production year: 2020 Machine state: like new Isdpezutpxefx Abneif Main technical parameters: - platens dimensions: 3.000 x 1.300 mm - overall thrust: 120 tons - number of pistons: 6ks (diam. 85 mm) - max. opening: 120 mm - oil boiler consumption: 36kW Main features: - solid-steel drilled platens - oil heating with electric boiler (max. 120°C) - exclusion of left pair of pistons - automatic flatness control - powered pre-loading composition belt (3.000 x 1.300 mm) - unloading grafity table with rollers - automatic loading/unloading system Programator: - control panel with touchscreen LCD (size 15 cm) - setting of pressing working programs - setting of pressure, time and temperature - timer for boiler heating start-up Machine immediatelly available.

Condition: excellent (used), Shelf dimensions: 130 cm width, 255 cm length. Iijdpozimiuefx Abnsf

Condition: excellent (used), functionality: fully functional, Shelf length: 3000 mm Shelf width: 1300 mm Number of pistons: 6 Water heating Safety switch with shear pin Iiodpfx Aeztpwcobnsf

Condition: ready for operation (used), Year of construction: 1988, Langzauner SF 120 Veneer Press 120 tons pressing force 8 cylinders 80 mm diameter Opening width 400 mm Connection value per plate 11.5 kW Weight 6100 kg Space requirement 3730 x 1550 x 1970 mm Temperature 130° C Year of manufacture 1988 Ijdpeztn Aqjfx Abnjif Heating plates Goldeloxal. Note: the plates are not in good condition. Dent on the lower plate in the rear right section. Price 11,000.- Price with new Elkom Goldeloxal plates 17,000.-

Condition: excellent (used), Year of construction: 1989, Veneer press Manufacturer: Bürkle Type: U60 Year of manufacture: 1989 Plate dimensions: 2,200 x 1,250 mm Opening width: 400 mm Pressing pressure: 60 tons Specific pressing pressure: 2.2 kg/cm² Iedpfx Aeztnhmsbneif Heating: Electric Motor power: 0.75 kW Emergency stop device: Emergency stop cable Weight: 3,000 kg Dimensions: 2,750 x 1,380 x 1,785 mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Shelf length: 3100 mm Shelf width: 1300 mm Clearance between shelves: 44 cm Number of pistons: 6 Hydraulic heating Safety cut-out with shear pin Year: 2015 Iijdpfoztcuzox Abnef Capacity: 5000 kg Power: 4 kW CE marking

Condition: like new (used), machine/vehicle number: 6684, Shelf length: 3000 mm Shelf width: 1300 mm Number of cylinders: 6 6 pneumatic side clamping devices Water heating Safety switch with shear pin Iodpfxjzr Ipzo Abnoif

Condition: good (used), Code: 0418 Iodpfx Abjzf Aivensif Brand: ORMAMACCHINE Model: P30/3 Hydraulic cold press for furniture, kitchens, wooden doors, custom-made furniture, composite materials, aluminium, plastics and various materials Technical data: Platen size mm 3000 x 1200 N° 3 hydraulic pistons Opening mm 500 Total thrust ton 15 Motor Hp 1,5 Overall dimensions mm 3300 x 1300 x 2100 h Weight kg 1100

Condition: excellent (used), functionality: fully functional, shelf length: 3000 mm shelf width: 1300 mm clearance between shelves: 30 cm oil heating 6 hydraulic cylinders safety shear pin Iiodszrf Tdjpfx Abnof

Condition: good (used), Year of construction: 2000, type of input current: three-phase, pressing force: 500 t, total length: 4,000 mm, total width: 4,000 mm, total height: 3,200 mm, overall weight: 43,000 kg, temperature: 160 °C, continuous press with mylar belt dimensions: 2700 x 3200 mm Iedpfx Asycxvuobnjif

Condition: used, functionality: fully functional, Manni shelving press for veneering, 2500×1300 Shelf length: 2500 mm Shelf width: 1300 mm Feed height: 410 mm Working pressure: 300 bar Press with 4 cylinders Iedpfx Abezmh Ndjnjif

Condition: good (used), Code: 0448 Brand: KOLMAG - ITALY Model: PGP 80 Iodpezmifgefx Abnjif Hydraulic cold press for panels, furniture, doors, joinery, composite materials and various: Technical data: Platens dimensions 2500 x 1100 mm N° 4 pistons Opening 310 mm Thrust 60 ton Motor 4 Hp Overall dimensions mm 3100 x 1150 x 1780 h Weight kg 2200

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Iijdpsdx R Tfofx Abnof Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Condition: new, Year of construction: 2026, Vacuum membrane press VPR-4000 is a universal press for woodworking and thermoforming. The VPR-4000 press is also tiltable and mobile. Applications: Isdpfx Abeyr R Hwjnjif Veneering / Form gluing / Wrapping... Coating of various profiles (veneer, paper, plastic, etc.) Wood bending: production of curved and laminated components Vacuum system: Working surface with vacuum channels for even negative pressure, even with large workpieces. Becker vacuum pump / oil-free / tank capacity 100 l Working area: 4000 x 1500 mm Pump power: 0.75 kW Vacuum pump flow rate: 40 m³/h Rubber membrane External dimensions: 4100 x 1650 x 1000 mm Weight: 400 kg Location: Ex stock 54634 Bitburg - Free loading on truck -

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm Ijdpfxjxgbxfo Abnsif - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord - Safety support for lower press table Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Ex stock - Immediately available -

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 117591299, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS MACHINE DETAILS Weight: 17,600 kg Length without attachments: 2.55 m Length with attachments: 3.70 m Width without attachments: 0.9 m Width with attachments: 1.25 m Height without attachments: 4.15 m Height with attachments: 4.30 m Mains voltage: 415 V AC Frequency: 50 Hz Hydraulic oil: AGIP OSO 46 Thermal oil: AGIP ALARIA 3 EQUIPMENT Iedpfjznmdvjx Abnsif CE marking

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 157090207, functionality: fully functional, pressing force: 180 t, stroke length: 325 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 180 t Max. hydraulic pressure: 600 bar Cylinder stroke: 325 mm Opening: 325 mm MACHINE DETAILS Control: Electronic control with operating panel/CNC Voltage: 400 V / 50 Hz Design: Industrial design EQUIPMENT Iisdsznmb Ijpfx Abnef Enclosed safety cabin Hydraulic press system Heating plate press Molding press

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, pressing force: 660 t, overall weight: 28,000 kg, heating capacity: 31 kW (42.15 HP), plate length: 1,900 mm, plate width: 1,600 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Iedpfx Aoznmbzjbnjif Press force: 660 t Press plate dimensions: 1,900 × 1,600 mm Heating capacity: 31 kW MACHINE DETAILS Electrical data Operating voltage: 400 V Control voltage: 220 V Frequency: 50 Hz Phases: 3 + N + PE Rated current: 160 A Connected power: 108 kW Machine weight: approx. 28,000 kg Design: Lower platen heating press / molding press EQUIPMENT Heated press plates Documentation

Condition: good (used), Year of construction: 1997, functionality: fully functional, Bürkle Multifoiler, membrane press Model BTF 1628/60 Year of manufacture: 1997 Line for laminating smooth and shaped MDF parts with thermoplastic films from roll or sheet, suitable for PVC, PP, high-gloss PVC, ABS films. Suitable for thermoforming and membrane process. Iijdpfx Ajznb Uisbnsf Max. part size: 1250 x 2550 mm Part thickness: 6-35 mm Heating plate dimensions: 1600 x 2800 mm Max. heating temperature: 140°C Stroke: 230 mm Siemens control system Total connected load: 38 kW With 2 aluminium tables and reserve table Weight: 16.5 t Press length: 2,550 mm Press width: 1,250 mm Max. workpiece thickness: 35 mm With pin table

Condition: excellent (used), Shelf length 2500 mm Shelf width 1300 mm 4 hydraulic pistons Clearance 400 mm Iiodpsyw H H Sjfx Abnof Water heating

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: A7879, functionality: fully functional, pressing force: 70 t, overall weight: 3,000 kg, opening width: 400 mm, TECHNICAL DETAILS Iiodpfx Abszktpqonjf Heating temperature: 70 - 100 °C Total pressing force: 70 tons Specific pressing force: 2.5 - 3.5 kg/cm² Opening width: 400 mm MACHINE DETAILS Control: Push-button control for opening, closing, and stopping Drive: Electro-hydraulic Heating plates: Aluminum Dimensions of heating plates: 2,550 x 1,100 mm Heating: Electric Hydraulic cylinders: 4 Diameter of hydraulic cylinders: 80 mm Rated voltage: 380 V Type of current: 3~ Frequency: 50 Hz Control voltage: 220 V Rated current: 21 A Power: 13.6 kW Dimensions & Weight Transport dimensions: 2,900 x 1,400 x 2,000 mm Weight: 3,000 kg EQUIPMENT Safety pull cord Pressure monitoring (automatic adjustment) Adjustable limit switch for specific opening width