Condition: good (used), Brand Amada Type GPX 1230 Dolrh Hvevk Dils Njut Year of construction 1995 Cutting length 3100 mm Cutting capacity steel 12 mm Back gauge 1000 mm CNC controlled

Condition: used, Year of construction: 2017, operating hours: 16,000 h, Functionality: fully functional, machine/vehicle number: 98310006, laser power: 3,100 W, laser hours: 11,000 h, laser wavelength: 1,080 nm, sheet thickness aluminum (max.): 25 mm, sheet thickness steel (max.): 25 mm, working range: 3,000 mm, total length: 10,200 mm, total height: 2,450 mm, total width: 2,850 mm, overall weight: 9,500 kg, power: 3.1 kW (4.21 HP), table length: 3,000 mm, table width: 1,500 mm, Equipment: cooling unit, documentation/manual, safety light barrier, Available from July 2025 Duolrswdwutoh Hv Nst

Condition: new, Year of construction: 2025, Functionality: fully functional, material thickness: 6 mm, coil outer diameter: 1,600 mm, coil weight: 15,000 kg, coil width: 1,600 mm, Press Feeding Lines are used to prepare and provide the material for the press machine to perform its task with high precision. Dueljvmlprorh Hv Nst All parts of the Press Feeding Line are manufactures in our facility from A to Z. Starting from the Decoiler (Uncoiler), Straightener can be controlled from one point. The system is controlled by PLC system, set in the customer language.

Condition: excellent (used), Technical specifications: Working width: 2050 mm Max. bending capacity for mild steel St40: 6.0 mm Max. pre-bending for mild steel St40: 4.0 mm Top roller diameter: 170 mm Side lower roller diameter: 170 mm Middle lower roller diameter: 145 mm Cone bending device Delrh Hvewdwiqo Neut Hardened rollers Working height: 800 mm Mobile control panel Hydraulic folding bearings CE mark Motor power: 2.5 kW Dimensions (length x width x height): approx. 3600 x 1200 x 1200 mm Weight: approx. 3 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2006, Condition: ready for operation (used), - USED - CO2 2D/3D LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3000 mm Y-AXIS TRAVEL: 1500 mm Z-AXIS TRAVEL: 400 mm RAPID FEEDS X-Y-Z: 50 - 100 m/min A-AXIS: 360 ° B-AXIS: ±135 ° SOURCE: PLS 2500 TF ; 2500 W CONTROL UNIT: PRIMACH 9000L WEIGHT: 12000 Kg OVERALL DIMENSIONS: 9500 x 3450 x 3400 mm Duslrh Hvewb Tr Ns Not ACCESSORIES: FUME EXHAUSTER ; PORTABLE HANDWHEEL NOTE: No 1 HEAD 5"; No 1 HEAD 7,5"

Condition: ready for operation (used), Year of construction: 1999, Available immediately from location: CNC press brake Bystronic Type PR 8 320 kN x 4100 mm Built in 1999, very few operating hours CNC control Cybelec DNC 900 Pressure capacity 320 t Working length 4100 mm Clearance between columns 3600 mm Stroke 465 mm Delrhewdvpio Hv Njut Bending aids 2 Lowering speed 190 mm/min Working speed 10 mm/min Return speed 150 mm/min Area x axis 1000 mm Controlled axes 8 Drive 37 kW Weight 25.8 t Many tools Price €29,500 plus VAT, ex location CH

Condition: used, Year of construction: 2006, Hydraulic driven Roller diameter Ø 165 mm Shaft Ø 40 mm Capacity tube (thin-walled) Ø 70x1.5mm min Ø 700 mm Capacity tube (thick-walled) Ø 2" x 3.2 Ø 450 mm Capacity angle bar 50x50x6 mm min. Ø 400 mm Capacity strip 50x10 mm min. Ø 250 mm Capacity strip (difficult side) 100x15 mm min. Ø 250 mm Capacity quiver 50x50x3 mm min. Ø 500 mm Capacity shaft Ø 35 mm min. Ø 250 mm Power 1.85 kW Bending speed 10 rpm Dusljtqcrherh Hv Not

Condition: new, Year of construction: 2024, The EQPB BabyPress is a hydraulically operated table model. It is a robust and low-noise machine, specially designed for the production of small parts. The entire production, from the hydraulic cylinder to the switch cabinet construction, takes place in-house. The advantages: - Basic version as C-frame - Compact table model - Ideal for prototypes and small series Delrjfi Tm Ioh Hv Neut - very short set-up time - Functionally simple - Wide range of applications Standard basic version: - Upper beam guide with high-precision roller guide - Promecam mechanical tool clamping system - narrow table with single V-tool holder (13x20) - low noise level - low power usage - simple service Technical data: - pressing force 6,2 t - Working length 285 mm - Passage between the stands 230 mm - Installation height 215 mm - Throat depth 70 mm - Plunger stroke 100 mm - X-axis manually adjustable Travel range 250 mm - pressing cycle max. 9.8 mm/s - Retraction max. 50 mm/s - Engine power 0,7 kW - Dimensions (WxHxD) 350 x 1,075 x 390 mm - Weight approx. 0.2 t Optionally we also offer this machine with CNC control and/or a press force of 12 t, just contact us.

Condition: new, Year of construction: 2025, Functionality: fully functional, type of input current: AC, sheet thickness steel (max.): 4 mm, sheet width: 1,600 mm, coil weight: 15,000 kg, Roll forming machines are designed to make sheet metal into straight formed shapes. The roll forming process takes a continuous flat sheet of metal and power feeds it through a successive series of Hardened Steel Rollers, which station by station shape the metal into a finished shape as it passes through them. We supply the Roll Forming Line to produce all steel profiles of solar panels including the brackets. The dimensions of the profiles are varies depending on the solar panel sizes. Our roll forming line is quite flexible and it is capable to produce all sizes without making any mechanical adjustment. Dslrsu D Hv Soh Hv Nout All parts of the Roll Forming Line are manufactured in our facility from A to Z. Starting from the Decoiler (Uncoiler), Straightener and Coil Loading Car, up to the Servo Feeder, Press, Roll Forming Machine, Fly Shear and Stacking Unit can be controlled from one point. The system is controlled by PLC system, set in the customer language.

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 4100 mm Column width: 3650 mm Press force: 220 tons CNC control: OPERATOR OPII graphic Color screen size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Dujlrhovlyh Ts Hv Njt Motorized adjustable backgauge Thrust: 420 mm Stroke: 180 mm Automatic crowning Laser monitoring: FIESSLER Motor power: 17 kW CE mark Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17 tons Accessories: AMADA tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2004, operating hours: 73,056 h, Functionality: limited functionality, machine/vehicle number: A0060A0266, Machine operating hours: 73,056 h Max. punching force: 220 kN Punching working area: 2,535 x 1,280 mm Max. sheet thickness: 8.0 mm Total connected load: 29 kVA Last commissioned: March 2024 Standard equipment Machine • Sturdy C-frame • Coordinate guide with integrated linear magazine • 21 tool stations • 3 clamps • Automatic part chute 500 x 500 mm Punching head • Hydraulic single-tool holder, 360° rotation • Adjustable hold-down force • Programmable hold-down device • Spray lubrication for punches Dujlrh Hvswduuke Net • Punch slug extraction Safety • CE mark • Multi-beam light barriers • Rapid hydraulic shutdown • Bowing detection Extended equipment • Brush table with loading and unloading aid • Height-adjustable, individually opening clamps • Reloading cylinder • Vibration-damped installation • Chip conveyor Available additional options • Trumalift Sheetmaster • Trumagrip 2500x1250 mm • Trumatool 40 • Trumasort R4 • Trumasort L The machine is available immediately. Due to the last commissioning more than a year ago, malfunctions may occur during commissioning. The sale is ex works: dismantling, removal, loading, and transport are at the buyer's expense.

Condition: refurbished (used), Year of construction: 1998, Functionality: fully functional, Peddimaster 602 (60to) + 3m electronic length stop + 2m length measuring bar incl. 3 folding cams Peddimaster 602 equipment: - Flat, profile & bar steel shears - notcher & hole punch 600 kN - Mechanically adjustable profile and flat bar hold-down device - Punch quick-change device up to Ø 31 mm - green series - Punching table - Universal punching saddle - Special punching device SV 58 Delrh Hjrknnfsv Njut - Square notching device - Triangular notching device 90° - Material support table for the notching device - Material support table 513 with 2 stop fingers - Length measuring bar type LML - 2.0 meters consisting of: - 1 x strip 2 meters incl. 3 folding cams - 1 x footrest Slot punch mm 14.0 x 26.0 Slot die mm 14.7 x 26.7 Slot punch mm 14.0 x 26.0

Condition: new, Year of construction: 2025, Bending machine ZOPF ZB 140/3 H 2 - compl. with standard roller set, - digital readout for left and right axis - hydraulic side guides - three smooth driven rollers - planetary movement of bending rolls - working with both vertical and horizontal shafts - built according to the CE rules - bending capacity steel up to 110x25 mm -shaft diameter 110 mm -Rolls diameter 350 mm -working speed 5 m/min -installed power 7,5 kw Dujlrh Hjd A Nb Hev Net -weight 2950 kg -module max Wcm3 157 -400 Volt 50 Hz. 3 ph.

Condition: new, Year of construction: 2024, The EQPB BabyPress is a hydraulically operated table model with CNC control. It is a robust and low-noise machine that has been specially developed for the production of small parts. The entire production, from the hydraulic cylinder to the control cabinet construction, takes place in-house. The advantages: - Basic C-frame design - Compact table model - Ideal for prototypes and small series - Very short set-up time - Functionally simple - Wide range of applications Standard basic design: - Upper cheek guide with high-precision roller guide - Mechanical tool clamping system Promecam - Narrow table with single V-tool holder (13x20) - CNC control Delem DA-41T - Y-axis CNC-controlled for programmed plunge depth calculation - X-axis CNC-controlled 170 mm traverse path - R-axis manual - low noise level - low power consumption - easy operation technical data: - pressing force 62 kN - working length 285 mm - clearance between the uprights 230 mm - Installation height 215 mm - throat 70 mm - ram stroke 100 mm Ram speeds: - Press stroke max. 9.8 mm/s - retraction max. 50 mm/s Dolrjglkfpsh Hv Njut - Motor power 0,7 kW - main dimensions (WxHxD): 900 x 1.300 x 550 mm - Machine weight approx. 0,25 t - Tank capacity (hydraulic oil) 10 l Optionally, we offer this machine without CNC control and / or a press force of 12 t, just contact us.

Condition: new, Year of construction: 2025, Functionality: fully functional, type of input current: AC, sheet thickness steel (max.): 4 mm, coil weight: 15,000 kg, coil width: 1,600 mm, Roll forming machines are designed to make sheet metal into straight formed shapes. The roll forming process takes a continuous flat sheet of metal and power feeds it through a successive series of Hardened Steel Rollers, which station by station shape the metal into a finished shape as it passes through them. We supply the Roll Forming Line to produce cable trays for any desire width and length. Perforated and solid bottom cable trays can be produced using our machine. Our roll forming line is quite flexible and it is capable to produce all sizes without making any mechanical adjustment. Dusljvmmz Aorh Hv Njt E8Pg8Z7 All parts of the Roll Forming Line are manufactured in our facility from A to Z. Starting from the Decoiler (Uncoiler), Straightener and Coil Loading Car, up to the Servo Feeder, Press, Roll Forming Machine, Fly Shear and Stacking Unit can be controlled from one point. The system is controlled by PLC system, set in the customer language.

Condition: excellent (used), Year of construction: 2003, The machine has very few working hours and has been in storage for many years) Performance: Hole diameter and thickness up to max.: approx. 28×13 mm Angle steel 90 degrees up to max.: 80x80x8 mm Angle 100x 100 x 10 Flat steel up to max.: 300 x10/ 200×13 mm (See also rating plate in the appendix). Machine weight: approx. 750 kg Various punches are also included with the machine Dolrh Hvjupzf Re Njut

Year of construction: 2013, operating hours: 584 h, Condition: excellent (used), Functionality: fully functional, Pipe forming machine in very good condition with few operating hours. Pipe diameters from 20 to 400 mm are possible. The technical specifications can be found in the images. The machine is ready for operation and can be inspected under power. Further information is also available on the Wecotech website. Duelrh Hewdui Uev Nst

Condition: good (used), Year of construction: 1997, Dead weight: 8,000 kg, pressure: 125 t, bending length: 3,050 mm, stroke approx. 335 mm, CNC control DELEM, Dslrhowduiue Hv Nout

Condition: as good as new (ex-display), Year of construction: 2021, Profile Bender Hydraulic 3 Driven Rolls Modell RH 55 horizontal and vertical use - shaft diameter 55 mm - hydraulic adjustment top roll -digital readout - standard rolls Duslrhehri D Ro Hv Njt - weight 538 kg - motor 7 hp - 400 volt 3 phase - bending capacity - round tube 70x3 mm and 76,1 mm - flat hard way 70x12 mm

Condition: good (used), Year of construction: 1983, Functionality: fully functional, machine/vehicle number: 12.454, back gauge: 560 mm, pressing force: 80 t, throat depth: 250 mm, distance between stands: 2,550 mm, bending length: 3,100 mm, Press brake Darley EHP 80. 31/25 80 tons, 3100 mm Duolswdt Txjrh Hv Nst Dividable straight blade Fixed rotating die A few years ago a Delem DA-58T CNC control was built and the drive of the stop was revised User-friendly CNC control where 2D products can be drawn Including rack with various blades and dies

Condition: new, Year of construction: 2025, Functionality: fully functional, coil weight: 15,000 kg, sheet thickness steel (max.): 6 mm, coil width: 1,600 mm, coil outer diameter: 1,600 mm, type of input current: AC, air pressure: 6 bar, Cut to length line is used for cutting the sheet metals from coil to sheet horizontally, straightening the sheets and after cutting to length operation stacking the sheet at the end of the line. Standard CTL line is contained as machinery units on automatic cut to length machine are decoiler, straightening, feeding, shearing unit and stacking unit. Dujlrh Hevmghvsv Njt All parts of the Cut to Length Line are manufactures in our facility from A to Z. Starting from the Decoiler (Uncoiler), Straightener and Coil Loading Car, up to the Servo Feeder, Guillotine and Stacking Unit can be controlled from one point. The system is controlled by PLC system, set in the customer language.

Condition: refurbished (used), Year of construction: 2006, operating hours: 16,450 h, Functionality: fully functional, machine/vehicle number: 11250, pump pressure: 4 bar, power: 19 kW (25.83 HP), High pressure pump DYNATRONIC 402S Manufacturer: Böhler, BHDT, BFT Year of manufacture: 2006 Dujlrjrcb Edjh Hv Not Operating hours: 16.450 h Used, fully serviced, tested and ready for operation, Maximator JET certificate  Drive power main engine 19 kW  Auxiliary unit oil/air cooler 1.1 kW  Additional unit pre-pressure pump 0.46 kW  Delivery rate 1.9 l/min  Design pressure 420 MPa  Operating pressure, max. 400 MPa  Continuous operating pressure 380 MPa  Pulsation damper 2.5 l  Oil tank volume 120 l  Ambient temperature oil/air cooler 10-35 °C  Width x depth x height 1,900 x 970 x 1,520 mm  Weight 1,250 kg  Sound level max. 78 dB(A)  Pressure-, volume flow-controlled drive hydraulics  Oil-air heat exchanger  Pulsation damper  Primary and secondary filter units  Stepless pressure adjustment from 50 to 400 MPa  Plain text display with event list  Pressure relief valve  Water pre-pressure pump  Operating pressure setpoint display  Soundproof housing Price ex Schweinfurt plus VAT 16.500,- € plus - transportation - Training 1 day for up to 4 people in Schweinfurt, optionally at the customer's premises - Installation and assembly Subject to changes and errors in technical data and prices. Subject to prior sale.

Condition: new, Year of construction: 2024, back gauge travel distance R-axis: 630 mm, sheet thickness steel (max.): 2 mm, cutting length (max.): 2,050 mm, total width: 1,500 mm, total height: 1,200 mm, total length: 2,700 mm, overall weight: 1,360 kg, table height: 825 mm, warranty duration: 12 months, input voltage: 380 V, working length: 2,050 mm, hydraulic system: nie, type of motor: three-phase motor, Equipment: documentation/manual, finger protection, Mechanical sheet metal guillotine METFORMER MCO-2x2000mm The guillotine is made entirely of steel, the structure is solid and heavy. Simple design with good looks. It is easy to use. This guillotine is widely used for cutting thin and medium steel sheets in light engineering, hardware manufacturing. The blade is made of a super strong steel alloy. Technical data: Model, MCO-2x2000, Engine power, kw, 3.0, Maximum sheet thickness (mm), mm, 2, Number of knife changes, pcs, 4, Length, mm, 2800, Djlrsvlxh Eoh Hv Njut Width, mm, 1260, Height, mm, 1300, Weight, kg, 1350,

Condition: new, Year of construction: 2023, tube bender R2 ZOPF - without bending tooling - with foot pedal and emergency stop - without tooling - control unit - 100 programs of 9 bends each Duslrjdkxkxeh Hv Njt - precise electronic control of C-shaft - manual and automatic bending mode - bending angle and springback angle are programmable by means of a microprocessor - rapid engagement and disengagement of the tooling - scale for counterbending holder - movable - dimensions 930x410x1000 mm - weight 280 kg - motor 1,5 Kw - 400 V 50 Hz 3 ph. - bending radius R55 - R340 mm - bending capacity of tube Ø 5 mm to 60 mm - max. Bending angle of 210 °

Condition: new, Year of construction: 2025, Functionality: fully functional, coil weight: 15,000 kg, sheet thickness steel (max.): 4 mm, outer diameter: 1,600 mm, coil width: 1,600 mm, type of input current: AC, Coil Slitting Line is used to cut the wider coils into the much more narrow coil strips, in the given dimensions. Servo Steel provides cost-effective Coil Slitting Lines, in any characteristics, according to the customer requirements. Dslsvmgn Nsrh Hv Nout All parts of the Coil Slitting Line are manufactures in our facility from A to Z. Starting from the Decoiler (Uncoiler), Straightener and Coil Loading Car, up to the Servo Feeder, Slitting Unit and Recoiler can be controlled from one point. The system is controlled by PLC system, set in the customer language.