Used machining centers (horizontal) X-axis travel 800-999mm for sale (55)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Control: Siemens SL Tool positions: 160 Hsdpsy Ap Euefx Agfsff Tool holder: HSK 63 Spindle speed: 10,000 min⁻¹ / 242N Pallet size: 630×500 mm Number of pallets: 2 X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm Max. table load: 1000 kg

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel distances X=2000 mm, Y=1500 mm, Z=1250 mm - Siemens 840 DsL CNC control - NC rotary table for 4-sided machining, 1250 mm x 1250 mm - Horizontal spindle HSK100 - Spindle: 2500 rpm, HSK 100, 2200 Nm spindle torque - Approx. 9,500 spindle hours - Tool changer system HSK 100 / 40 stations - Chip conveyor - Internal/external air blow-off device - Minimum quantity lubrication for dry machining of castings - Full enclosure - Large interference circle 2300 mm - Double pallet changer Hsdpfx Aoy Ah Risgfeff - Short delivery time, subject to prior sale - Year of construction: 2010 Coolant supply available as an option - ICS 60 bar for deep hole machining

Condition: ready for operation (used), Year of construction: 2003, operating hours: 54,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 80, number of axes: 4, This 4-axis HELLER MCi 25 was manufactured in 2003. It features a generous X, Y, and Z-axis travel of 800 mm each, along with a B-axis capable of 360° indexing. The machine is equipped with a tool magazine holding 80 slots and supports a total of 6 pallets. If you are looking to get high-quality machining capabilities, consider the HELLER MCi 25 horizontal machining centre we have for sale. Contact us for further details. Hfjdjyzzr Depfx Agfef • B-axis: 360° (indexing/rundtisch) • Tool magazine: 80 slots • Pallet quantity: 6 total (2 in use, 4 standby) • Operating hours: approx. 2,700–3,000 hours per year (counter reported defective) • Total estimated hours: approx. 54,000–60,000 (based on 2-shift operation since 2006) • Coolant volume: 1,500 liters • Voltage: 400 V • Frequency: 50 Hz • Full load current: 100 A • Connection load: 65 kVA • Status: Fully functional, under power, currently in production Technical Specification Taper Size HSK 63

Condition: used, Makino A77 Twin Pallet CNC Horizontal Machining Centre With Makino Fanuc Professional 3 (16M) Control Pallet Dimension 630 x 630mm (4 'T' Slots). Maximum Pallet Load 1,200kg. Maximum Component Dimension Ø910 x 1,000mm. Axis Travel 'X'=800mm, 'Y'=750mm, 'Z'=700mm. Rapid Traverse 'X'=30m/min, 'Y'=30m/min, 'Z'=30m/min. Cutting Feed 'X, Y, Z'=30,000mm/min. Maximum Spindle Speed 10,000rpm (30kW Motor). Spindle Taper ISO 50. 244 Position ATC. Maximum Tool Ø100mm (Non Adjacent Ø300mm), Maximum Tool Length 450mm, Maximum Tool Weight 20kg. (1999) Hfjdpfx Agey Amaisfof With Through Spindle Coolant System, Dual Auger To Syst Chip Conveyor, Renishaw Spindle Probe Interface, SMC IDF 60 Air Dryer, Kanto Seiki Oil Chiller, Staging, Wash Gun, Hand Wheel, Oil Skimmer, Signal Tower & Manuals. Approx Overall Footprint L7.2 x W3.8m . Weight 18,000kg. Note: Tooling Not Included. Original chiller replaced by a new chiller (leased) - Not Included.

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 840 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 840 mm, overall weight: 18,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 30,000 W, number of axes: 4, This 4-axis MORI SEIKI SH633 was manufactured in 2001. It features an X-axis travel of 840 mm, Y-axis travel of 760 mm, and Z-axis travel of 840 mm. The machine is equipped with 2 pallets, each measuring 630 x 630 mm, and can handle a maximum workpiece weight of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SH633 horizontal machining centre we have for sale. Contact us for further details. • Machine mass: 18,500 kg Hfedpsyyzqkefx Agfef • Number of pallets: 2 • Pallet size (L x W): 630 x 630 mm • Maximum workpiece weight: 1,200 kg • Number of tool pockets: 60 • Electrical specs: • Phase: 3 • Frequency: 50 Hz • Voltage: 200 V • Full load current: 252 A • Spindle motor current rating: 120 A • Interrupting capacity: 5 kA • Rated power: 87 kVA

Condition: new, Year of construction: 2024, functionality: fully functional, HORIZONTAL MACHINING CENTER MODEL AVEREX HS 450 K 1. Controller: AVEREX-FANUC Mpro I Plus (FANUC Oi-MF PLUS) 2. APC: 2-pallet system 3. Maximum spindle speed: 15,000 rpm Hfjdeyz Du Uopfx Agfsf 4. Spindle taper: BBT 40 BIG-PLUS 5. Maximum spindle motor power: 37kW, 249Nm 6. 100% hand-scraped contact surfaces 7. One-piece stepped casting with heavily ribbed base 8. Maximum X/Y/Z travels: 640mm/610mm/680mm 9. Maximum work area: 785mm x 1000mm 10. Pressurized oil-air lubrication for spindle, ball screws, and linear guides 11. Thermal stability: spindle cooling 12. Spindle with BIG-PLUS® design 13. THK® (IKO®) roller guides 14. TSUBAKI® ball screws 15. Rapid traverse rate X/Y/Z: 60 m/min, acceleration 1G 16. APC unit with two 400mm x 400mm pallets 17. High-speed ATC: 1 sec tool-to-tool change 18. Hydraulic pallet clamping system with air seal detection 19. Through-spindle air blow 20. Air blow through spindle during ATC 21. High-quality telescopic covers for 3 axes 22. Automatic pallet wash system 23. Automatic machine on/off and warm-up timer (up to 7 days in advance) 24. Low lubrication alarm system 25. 3-color machine status indicator 26. Coolant tank level detection with float ball type 27. Oil skimmer 28. 50 kVA transformer 29. CE EN ISO 13849-1 certification Standard controller functions: 1. 15" color LCD with intelligent human-machine interface (iHMI) 2. Part program memory: 5,120 meters (2MB) 3. HRV-III+ servo drives 4. JERK control 5. Nano AICC II control with 200-block lookahead 6. Ethernet 7. CF/USB device 8. Manual Guide i 9. Multilingual display 10. High-speed skip 11. Rigid tapping 12. Standard drilling cycles 13. Helical interpolation 14. Circular interpolation 15. Custom macros 16. Custom macros – common variables #600-#999 17. Tool life management 18. Storable programs: 1,000 19. Workpiece coordinate offsets: 48 pairs 20. Tool offsets G45 to G48 21. Tool offsets: 400 pairs 22. Tool offset memory C 23. Programmable data input G10 24. Coordinate system rotation 25. Polar coordinate command Additional functions: 1. Scaling 2. Program restart 3. Override interruption via MPG 4. Programmable mirror image 5. Programmable spindle/tool load monitoring 6. Programmable ATC speed 7. Programmable tool magazine speed 8. Large tool function Included accessories: 1. ATC60 60-tool magazine 2. Full 4th axis rotary table PARKSON WU® (substitution 33.3 rpm 0.001°) 3. Scraper-type chip conveyor (including 750L coolant tank) 4. MARPOSS® T-18 (retractable) tool measurement 5. 40 bar through-spindle coolant FIFTH-AXIS PREPARATION AND FIXTURING ON BOTH PALLETS WITH DRIVE – CABLES AND PIPES

Condition: good (used), Year of construction: 2013, functionality: fully functional, The machine is in good technical condition. X-axis travel: 900 mm Y-axis travel: 500 mm Z-axis travel: 450 mm 4 axes CNC control: Fanuc FS31i Spindle speed: 20–20,000 rpm Hodpfx Aeyzzbxsgfsff Table: - External length: 1,000 mm - External width: 500 mm - Table load capacity: 1,000 kg New electric spindle installed 4 years ago. Tool magazine for 30 tools, including tool holders. The machine operated on a single-shift basis. Inspection during operation is possible by prior arrangement.

Condition: used, Year of construction: 2006, x-travel 800 mm y-travel 800 mm z-travel 800 mm Hfjdpfx Agjyb S H Rofsf Control Siemens 840 D total power requirement --- kW weight of the machine ca. 19,0 t dimensions of the machine ca. --- m

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller manufacturer: FANUC, controller model: Series 21i-MB, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis DOOSAN ACE HC-500 was manufactured in 2005. It features an X-axis travel of 850 mm, Y-axis travel of 700 mm, and Z-axis travel of 750 mm. The machine includes a robust pallet size of 500 x 500 mm with a maximum pallet load of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN ACE HC-500 horizontal machining centre we have for sale. Contact us for further details. • Distance spindle face to pallet center: 150–900 mm • Distance spindle center to pallet surface: 50–750 mm • Pallet size: 500 x 500 mm Hodpfx Agoyxpplofoff • Max. pallet load: 500 kg • Spindle orientation built-in sensor • Through-spindle coolant: 70 kg/cm², max flow 20 L/min, pump power 3.7 kW • Spindle completely overhauled in 2023 • Z-axis ball screw replaced in 2020 Technical Specification Taper Size ISO 40

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 780 mm, total height: 31,500 mm, Equipment: documentation/manual, rotational speed infinitely variable, Dear customer, we have an Okuma MA 500 HB 6APC in good condition in stock for you. We look forward to your inquiry and remain with best regards, Hfedpfx Agovta Sbefef Your Neff - The Okuma Specialist Team Data sheet: Control: OSP P200-M Travel paths X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degrees] 1; 360 degree incrementation Tool changer 200 ATC MAS BT50 Tool positions: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet station 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Other features: – Renishaw Probe – Renishaw Tool Break Control – Mayfran Concept with high pressure pump Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and Acceptance, loading, transport, assembly and commissioning of the machine as well as instructions and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit our homepage.

Condition: used, Year of construction: 2012, Double-spindle machining centre with swivelling carrier for mounting clamping bridges Traverse paths x-axis: 800 mm / y-axis: 900/1200 mm / z-axis: 650 mm Spindle distance: 800 mm Spindle speed up to 12,500 rpm Power 10% - 40% - 100% duty cycle = 42 / 35 / 28 kW Torque 10% - 40% - 100% duty cycle = 200 / 165 / 135 Nm Tool changer: 2 x 42 tool positions Tool holder: HSK 80 Rapid traverse: 120 m/min Hjdsyw R Ndjpfx Agfjff - CNC control Siemens 840 Dsl - Central coolant system

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 970 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: FANUC OİMF+, controller model: 2025, workpiece length (max.): 1,100 mm, workpiece width (max.): 1,100 mm, workpiece weight (max.): 2,500 kg, rotary table diameter: 630 mm, overall weight: 27,000 kg, spindle motor power: 35,000 W, number of slots in tool magazine: 60, tool length: 630 mm, tool diameter: 250 mm, MAKINO A88 HORIZONTAL MACHINING CENTER Hfedpfx Agjyy Dhfefsf Control System: Fanuc Oi-MF Plus 15" Touchscreen All electronic components, servo motors, and drives were completely replaced with a Fanuc system in 2025. The mechanical components have only 2 years of operating time. Specifications: Pallet Size (2): 24.8" x 24.8" (630 mm) X-Axis Travel: 35.4" (900 mm) Y-Axis Travel: 31.5" (800 mm) Z-Axis Travel: 38.2" (970 mm) B-Axis Rotation: Full (360,000°) Spindle Speed: 20 – 12,000 RPM Spindle Taper: HSK100 Spindle Motor: 40 HP Automatic Tool Changer: 60 tools Pallet Changer: 2 Power: 380 V; 3 Phase; 60 Hz Full Load Current: 139.8 Amp Approx. Dimensions: 227" x 144" x 124" Approx. Machine Weight: 27 tons Features: 4th Axis Pallet Indexing Through Spindle Coolant and Air Shower Coolant and Spindle Nozzle Coolant Wash Guns and Pump Spindle Lubrication Unit Hydraulic Unit Chip Conveyor Coolant Tank Fully Enclosed Cutting Area Tool Life Management Rapid Traverse Speed: 50 m/min Z-Axis Dual Ball Screw Y-Axis Dual Ball Screw Capable of tool change and operation with 630-size fixtures All maintenance has been completed.

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Hedpfx Agjxtfz Defeff - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 181174, operating hours: 5,600 h, 5 axis simultaneously and 5 axis free form - CAP Tool system! Accumulated time: Power on: 2026:04'40" Auto open: 1323:07'43" Auto cut: 669:16'50" Total cut: 5606:49'54" Total time: 2028:04'40" Bought new from Mazak factory. Excellent and working condition. Comes with different machining tools. You're welcome to test and see the machine. Year of manufacture: 10-2005 - Max. Schwingdurchmesser …………….…… Ø660 mm - Max.Bearbeitungsdurchmesser ( oberer / unterer revolver ) ………..Ø660 mm / Ø270 mm - Max. Bearbeitungslange ……………....…1016 mm - X – Achsen Verfahrweg ( oberer revolver ) ……………...………….580 mm - X2 – Achsen Verfahrweg ( unterer revolver ) …………….150 mm - Z – Achsen Verfahrweg ( oberer revolver ) …………….....…..1045 mm - Z2 – Achsen Verfahrweg ( unterer revolver ) …………….….990 mm - B – Achsen Verfahrweg ………….…………….….225° - C – Achsen Verfahrweg ………….…………….360° - Spannfuttergrose ……………... 8 “ - Hauptspindeldrehzahl ……………..….5000 o / min - Hauptspindelbohrung ……………...……………. Ø51 mm - Min. Hauptspindelindexierung ……………..………… 0.0001 ° - Spannfuttergrose 2. spindel ……………..………….. 8 “ - Drehzahl der 2. spindel …………….…5000 o / min - Verfahrweg des 2. spindelstocks ( W – Achsen ) ……………..…….. 1050 mm - Eilganggeschwindigkeit des 2. spindelstocks ( W – Achsen ) …….. 30000 mm / min - Min. Indexierung der 2. spindel …………… 0.001 ° - Revolvertyp ( oberer )…………… mit ATC - Werkzeugschafthohe ( oberer )……………..….. 25 mm - Bohrstangenschaftdurchmesser ……………..….. Ø40 mm - Revolvertyp ( unterer )…………….…… trommelrevolver mit 9 stationen - Werkzeuganzahl …………….….. 9 Werkzeuge - Werkzeugschafthohe ( unterer )…………….…….. 25 mm - Bohrstangenschaftdurchmesser …………….... Ø32 mm - Revolverschaltzeit ( unterer )……………. 0.14 s / 1 schaltschritt - Frasspindeldrehzahl …………….. 12000 o / min - Bearbeitungskapazitat der frasspindel ……………. Frasen : Ø100 mm , schaftfrasen : Ø32 mm , Bohren : Ø30 mm , Gewindebohren : M27 -: X – Achsen ( oberer ) …………… 38000 mm / min : X 2– Achsen ( unterer ) ………….…… 38000 mm / min - : Y – Achsen …………… 26000 mm / min -: Z – Achsen ( oberer ) …………….… 38000 mm / min -: Z2 – Achsen ( unterer ) ……………..… 38000 mm / min - Eilganggeschwindigkeit : C – Achsen …………….… 400 o / min - Tippvorschubgeschwindigkeit : X – Achsen ( oberer ) ……….…… 2000 mm / min - Tippvorschubgeschwindigkeit : X2 – Achsen ( unterer ) ………..… 2000 mm / min - Tippvorschubgeschwindigkeit : Y – Achsen ( oberer ) ………….… 2000 mm / min - Tippvorschubgeschwindigkeit : Z – Achsen ( oberer ) …………..… 2000 mm / min - Tippvorschubgeschwindigkeit : Z2 – Achsen ( oberer ) …………… 2000 mm / min - Tippvorschubgeschwindigkeit : C – Achsen …………….… 2000 ° / min - Werkzeugschaft / Werkzeugaufnahmekapazitat …………….. CAPTO C6 No 20 Werkzeuge - Max. Werkzeugdurchmesser …………….. Ø90 mm (Ø125 mm bei freien Nebenplatzen ) 300 mm / 10 kg - Werkzeugwechselzeit ( werkzeug-zu-werkzeug ) …………….. 1.3 s - Hauptspindelmotor ( 30 min -/Dauerbetrieb ) ……………..AC 22 kW / AC 15 kW - Motor der 2. spindel ( 30 min -/Dauerbetrieb ) ……………....AC 18.5 kW / AC 15 kW - Frasspindelmotor ( 20 % ED ) ……………. AC 15 kW - Kuhlmittelpumpenmotor ……………1.2 kW Hfsdpod H Eryjfx Agfof - Leistungsaufnahme (Dauerbetrieb ) …………….….. 66.0 kVA - Druckluftanschluss ……………..…..5 bar , 500 l / min - Kuhlmittel frassungsvermogen des Tanks ……………..….. 300 l - Maschinenhohe ……………..……..2597 mm - Aufstel

Condition: used, Technical details: Hjdpfx Agewix E Refoff x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, accessories for both machines: 18 pallets, approx. 300pcs. toolholders, miscellaneous devices for workpiece-clamping... *

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 Hodpfxowix Hhs Agfsff rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 5584 mm Machine weight 16000 kg Measurements height 3342 mm Measurements depth 3693 mm Control Unit Brand FANUC Main Drive Number of axis 4 Tool taper BT 50 Spindle Speed 10000 RPM Movement X-Axis Movement 900 mm Z-Axis Movement 1020 mm Y-Axis Movement 800 mm Tools Number of index 40 or 60 Hfedpfx Agjx D Iuhsfef Max tool diameter 115 mm Max tool length 600 mm Max weight 30 kg This 4-axis Makino a81 horizontal machining center was manufactured in 2011. It features a robust 630×630 mm pallet, capable of handling a maximum load of 1200 kg, and a spindle speed range of 20−10000 min−1. The machine offers a rapid traverse rate of 50000 mm/min, enhancing productivity. Ideal for complex machining tasks, consider the opportunity to buy this Makino a81 horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Hodpfx Ajym Nc Tegfjff Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 640 mm, controller manufacturer: Fanuc, controller model: PRO 5, spindle nose: HSKE 63, Our machine is located in Plovdiv , Bulgaria. Machine is in working condition. Extremely clean. If you would like to see the machine , We can show the machine in our warehouse. The price is Ex Works Bulgaria warehouse price. IN OUR STOCKS WE HAVE: *Horizontal Machining centers *CNC lathes 2 axis *CNC lathes 2 axis + C axis *CNC lathes 2 acis + C axis + Y axis *CNC tapping centers *CNC vertical machining centers Hfjdpfx Agsyrdtwjfef %100 owned +50 CNC machine tools in stock! You are welcome to contact us for your further questions CNC World Machine LTD

Condition: excellent (used), FANUC 16 MA-Pro 3 Control With B-axis Working travels 900 x 800 x 970 mm Tool changer with 244 Positions Spindle speeds 0-12'000 rpm Hjdpsylbc Nsfx Agfoff Spindle taper HSK100 2 paletts 630 x 630 mm B-axis 0.001° Cooling through spindle 3D measuring taper Tool breakage control device Chip conveyor Misc. accessories MARCELS MASCHINEN AG

Condition: used, Year of construction: 1998, x-travel 800 mm y-travel 750 mm z-travel 770 mm Control Fanuc type PRO-3 tool taper HSK 100 power capacity 30 kW turning speeds 10000 U/min rapid traverse 35 m/min Tool changer 90 Pos. Cooling through the spindle 70 bar size of pallet 630x630 mm Table load 1200 kg rotary table tiltable 1 Grad type of pallet-changer 2 weight of the machine ca. 15 t Special features: Tool magazine for 90 HSK-A100 short-taper tools 70 bar high-pressure coolant system Indexable rotary table swivels in 1° increments Pallet size 630 x 630 mm Maximum table load 1,200 kg Hydraulic power unit for fixture clamping system Fanuc Pro-3 control system Automation: Dual pallet changer Tool breakage detection Automatic workpiece measurement with Marposs touch probe The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Hodpeyqu Naofx Agfjff If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1998, x-travel 800 mm y-travel 750 mm z-travel 770 mm Control Fanuc type PRO-3 tool taper HSK 100 power capacity 30 kW turning speeds 10000 U/min rapid traverse 35 m/min Tool changer 90 Pos. Cooling through the spindle 70 bar size of pallet 630x630 mm Table load 1200 kg rotary table tiltable 1 Grad type of pallet-changer 2 weight of the machine ca. 15 t Special features: Tool magazine for 90 HSK-A100 short-taper tools 70 bar high-pressure coolant system Indexable rotary table swivels in 1° increments Pallet size 630 x 630 mm Maximum table load 1,200 kg Hydraulic power unit for fixture clamping system Fanuc Pro-3 control system Automation: Dual pallet changer Tool breakage detection Automatic workpiece measurement with Marposs touch probe The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Hjdpeyqu I Ajfx Agfsff Your Markus Hirsch Team

Condition: used, Year of construction: 2000, x-travel 900 mm y-travel 800 mm z-travel 970 mm Control Fanuc type PRO-3 tool taper HSK 100 power capacity 30 kW turning speeds 12000 U/min rapid traverse 50 m/min Tool changer 90 Pos. Cooling through the spindle 70 bar size of pallet 630x630 mm Table load 1200 kg rotary table tiltable 1 Grad type of pallet-changer 2 Hfjdpfxsyqu H Es Agfjf weight of the machine ca. 20 t Special features: Tool magazine for 90 HSK-A100 short-taper tools 70 bar high-pressure coolant system Indexable rotary table swivels in 1° increments Pallet size 630 x 630 mm Maximum table load 1,200 kg Hydraulic power unit for fixture clamping system Fanuc Pro-3 control system Automation: Dual pallet changer Tool breakage detection Automatic workpiece measurement with Marposs touch probe The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2005, Make: MAZAK Type of machine: HCN-6000 Year of manufacture: 2005 Control system: Mazatrol 640M Machine's weight: 16.000 kg Tool holder: SK 50 x-travel: 800 mm Hfsdpfx Asyc Sbkjgfjf y-travel: 800 mm z-travel: 800 mm Speed range: 10.000 U/min max. Table load: 1.000 kg Table dimensions: 500 × 500 mm Number of tools in the magazine: 60 Plätze

Condition: good (used), functionality: fully functional, travel distance X-axis: 1,000 mm, For sale is a milling machine of the Niigata brand and type U-1000 The machine is fully functional and ready for immediate use Technical data Work table 360x1500 mm with 4 T-slots Longitudinal travel X 1000 mm Transverse travel Y 500 mm Mounting: SK 50 Hfsdpsr Izbrjfx Agfef Vertical travel Z 430 mm Rapid traverse 2 m / min. Spindle holder SK 50 Spindle speeds 500 - 2000 rpm. Max. Table load 800 kg Vices and magnetic plate not included in the offer, can be offered additionally. On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website