Condition: new, Year of construction: 2022, - Capacity 1070 x 3 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - Tapered rollers - Brake motor - Foot switch - Emergency stop - Documentation Deljgg Rbpjip T Dtskl - 400V

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m Djlipevgbgas T Dtekl This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. *

Condition: used, knife sets for a press brake total 3 sets of upper knives (total 12 knives of 835mm long) 2 sets of lower knives. (total 8 dies of 835mm long) 1 x divisible upper beam Djlipjwgppzo T Dtskl 1 x bending block set the mentioned price of €3500 is for the entire lot together. for the dimensions of the mounting for the upper knife see image

Condition: new, sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 5100messurements (LxWxH): 3800 x 1750 x 1700 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel Dkjlipovap Tus T Dtol  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Year of construction: 2015, Condition: ready for operation (used), Main Drive Laser power 5KW Co2 Additional Equipment Platform installation possible Dkslewdzagsip T Dtsl Machine was connected to STOPA Universal large-scale storage system (4x2 metres) Working area 4000x2000mm Closed machine frame with integrated laser unit / Movement unit for high-precision processing / Torque drive in combination with linear direct drives / Closed beam guidance / Single cutting head strategy / Cooling unit Automatic pallet changer in longitudinal direction with extended pallet pull-out / 17” touch factory screen / ergonomic control panel with or screen / Work area lighting / Position laser diode spraying device / PierceLine, FocusLine, NitroLine, PlasmaLine Co2 laser TruFlow 5000 with optimized standby mode / Maintenance-free turbo radial blower / High-frequency excitation / TASC laser control, laser power control, laser logbook function Lens cutting head with 250mm lens / Universal quick-change device (UTI) with bus connection / LensLine with status check / ControlLine: Height control and sheet outer edge detection / Lens with RFID chip Laser ON / beam on 78187h/26610h This TRUMPF TruLaser 3040 was manufactured in 2015. It features a 5KW CO2 laser and has been maintained annually by TRUMPF. It can be integrated with a STOPA Universal large-scale storage system. If you are looking to get high quality cutting capabilities consider the TRUMPF TruLaser 3040 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), throat depth: 400 mm, operating speed: 11 mm/s, table width: 120 mm, retraction speed: 113 mm/s, travel distance Z-axis: 200 mm, controller manufacturer: Cadman-B + Touch, power: 12.5 kW (17.00 HP), net weight: 6,200 kg, opening height: 400 mm, passage width: 2,050 mm, 8 assen: Y1 / Y2 / X / X' / R / Z1 / Z2 / V Bovenste type LVD-gereedschap Lager type LVD hydraulisch Optioneel: Willa hydraulische adapter (modifix)trumpf Capacity: 80 ton x 2500 mm Dkslsv Rwk Aeip T Dtsl Backgauge: CNC Locking speed: 130 mm/sec

Condition: new, - Capacity 700 x 4 mm - Conical rollers - Removable top roller - Brake motor - Foot control - Emergency stop - Documentation Djlip T Djh Raytstekl - 400V

Condition: ready for operation (used), Year of construction: 1994, The press brake was manufactured in 1994. The working length is 1250 mm with a pressing force of 600 kN. Manufacturer: Micoda Working length: 1250 mm Dkolip T Dep R Ircotol Press force: 600 kN Weight: 4000 kg Power: 10 KW

Year of construction: 1973, Condition: ready for operation (used), A complete cut-to-length line (coil line) for sheet metal processing, specifically for coils, is available. Product information: Material: stainless steel strip, max. strength at 2mm thickness: approx. 70kp/mm², max. elongation at 70kp/mm²: 50%, strip width range: 100mm-500mm, strip thickness range: 0.3mm-2.5mm, sheet lengths: 250mm/1000mm/4000mm/10000mm, strip speed range: 7.5m-30m/min, hydraulic operating pressure: approx. 80bar, pneumatic operating pressure: approx. 4bar, clarification sheet length: over 250mm: Feed and shear adjustment, over 1000mm: with mechanical intermittent operation, over 4000mm: with electrical on/off operation. 1) Decoiler, max. outer coil diameter: 1400mm, inner coil diameter: 400mm/500mm/600mm, decoiler drum spreading range: 370mm-620mm, spreading cylinder diameter: 125mm, spreading cylinder stroke: 40mm, spreading segment useful width: 600mm, max. strip weight: approx. 3000kp, max. strip tension: approx. 400kp, decoiler displacement: +/-100mm. 2) Kohler straightening machine, straightening roller diameter: 30mm, bale length: approx. 600mm, number of straightening rollers: 21, feed rate: 7.5m-30m/min, strip width range: 100mm-500mm, strip thickness range: 0.3mm-2.5mm. 3) Flying hydraulic shears, material/strip thickness/speed: to suit the system, number of cuts: 30 cuts/min, sheet length range: 250mm-1000mm, blade width: 600mm. 4) Conveyor belt, belt width: 600mm, center distance: 3500mm. Documentation available. On-site inspection is possible. Dolip T Djwgngfetekl

Condition: new, sheet thickness: 3bending length: 1250upper roll diameter: 90sheet length: 1250 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Working Length: 1250 mm Maximum Thickness:Pre-bending: 2.5 mm Bending: 3.0 mm Yield Point: 240 N/mm² Number of Rolls: 3 Top Roll Diameter: 90 mm Minimum Bending Diameter: 130 mm Motor Power: 1.1 kW Machine Length: 1950 mm Height: 1130 mm Width: 900 mm Weight: 500 kg Options: - Back roll with motor EURO 825,-- Dkslip Tjd Ab Tzs Dtol - Digital readout for displaying position of the backroll EURO 1.010,-- - Body cover EURO 314,-- - Hardened rolls EURO 550,-- We have many references!

Condition: new, Year of construction: 2023, operating hours: 10 h, Functionality: fully functional, machine/vehicle number: 62538, sheet thickness aluminum (max.): 2 mm, total length: 1,500 mm, total height: 170 mm, total width: 1,200 mm, overall weight: 10,000 kg, type of input current: three-phase, For sale is the automatic box bending and panel bending machine shown in the picture. Completely new condition, selling due to lack of use. Very fast and functional bending machine suitable for bending large series of boxes, panels, thin sheets. It has an electric servo drive, so the bending result is fast. Use: for bending wardrobes, kitchen appliances, electrical cabinets and other thin sheets. Machine features: -10 axes -Total width: 1500mm Deliev S Exdep T Dtokl -Opening (Maximum height between lower and upper tool) -Bending thicknesses: Steel (dc01): 1.5mm Stainless steel: 1mm Aluminum: 2mm -Minimum bending dimensions for parts 340mmx340mm -Maximum sheet length 1600mm Weight: 10 Tons

Condition: ready for operation (used), total height: 2,500 mm, total length: 4,400 mm, throat depth: 250 mm, operating speed: 10 mm/s, retraction speed: 100 mm/s, travel distance Z-axis: 200 mm, controller manufacturer: 2D touch, power: 15 kW (20.39 HP), net weight: 10,000 kg, opening height: 400 mm, passage width: 3,150 mm, total depth: 1,700 mm, 7 assen: Y1 / Y2 / X / R / Z1 / Z2 / V Systeemtooling XRZ-versie met asymmetrische vingerbreedte Fiessler BendGuard Capacity: 135 ton x 4100 mm Backgauge: CNC Locking speed: 100 mm/sec Dslipjv Rwlgj T Dtjkl

Condition: new, - Capacity 2070 x 1.5 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - Conical roller - Swiveling top roller - Brake motor - Foot control - Emergency stop Dkelovkkkioip T Dtel - Documentation - 400V

Condition: like new (used), Motorized swivel bending machine 1520x6 mm Back stop Dkjljvuhrrsip T Dtsl Central lubrication

Condition: excellent (used), Year of construction: 2021, operating hours: 9,154 h, Functionality: fully functional, machine/vehicle number: 1185, laser power: 4,000 W, laser hours: 1,718 h, sheet thickness aluminum (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness copper (max.): 12 mm, sheet thickness brass (max.): 15 mm, working range: 3,060 mm, total length: 11,900 mm, total height: 3,200 mm, total width: 5,700 mm, workpiece weight (max.): 1,100 kg, positioning accuracy: 0.025 mm, overall weight: 11,000 kg, warranty duration: 60 months, power: 21 kW (28.55 HP), repeat accuracy: 0.025 mm, sheet thickness (max.): 25 mm, positioning speed: 120 m/min, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, compressed air connection: 7 bar, space requirement width: 5,700 mm, space requirement length: 11,900 mm, space requirement height: 3,200 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 100 mm, year of last overhaul: 2025, table length: 3,200 mm, table width: 1,600 mm, table height: 800 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, control cabinet height: 3,000 mm, control cabinet length: 3,000 mm, control cabinet width: 3,000 mm, cutting speed: 17,000 mm/min, Equipment: cooling unit, documentation/manual, safety light barrier, Used machine in very good and well-maintained condition, including factory warranty. Available immediately. Pick up ex works. - Laser type: fiber - Working area (X x Y x Z): 3,100 x 1,580 x 100 mm - Max. workpiece weight: 1,100 kg Dolip T Dewgl Eljtekl - Positioning speed X / Y: 120 m/min - Simultaneous positioning speed: 169 X + Y m/min - Laser power: 4 kW - Maximum iron thickness: 25 mm - Maximum brass thickness: 15 mm - Maximum copper thickness: 12 mm - Maximum stainless steel thickness: 30 mm - Maximum aluminum thickness: 30 mm - Control: BYSTRONIC ByMotion - On-time hours: 9,154 h - Operating hours: 1,718 h - Power consumption: 21 kW - Dimensions (length x width x height): 12,150 x 5,700 x 3,200 mm - Weight: 19,000 kg AIRCO Nitrogen Generation System INFINIT PSAL 15 SN AIRCO High-Pressure Compressor N2 PSAL 15 SN 32A Acceptance Report Type PSAL 15 SN Date Friday, February 25, 2022 Serial Number PN 30.110 Serial Number AIRCO 2022-21044 Year of Manufacture 2022 Customer Rotec GmbH Measurement Data in Automatic Mode Setpoint Actual Value Unit Network Pressure at Inlet 7.5 5.0-6.5 bar Product Purity Min. (PN) 99.9 99.85% Product Purity 2 min. (N-KAT) 99.999 99.9999% Residual Oxygen PN left 16 to 40% Residual Oxygen PN right 16 to 40% Inlet Temperature 5 to 50 21.01 °C Inlet Pressure Dew Point -3 up to 5 3.64 °C Nitrogen flow 15.0 to 16.5 8.5-13.0 Nm3/h Hydrogen flow 37.5 15-35 l/h Settings Setpoint Actual value Filling time 55 50 sec. Pressure equalization time 6 6 sec. Dead time 1 1 sec. Inlet pressure regulator 7.5 7.5 bar Fine pressure regulator PN and N-KAT 0.1 0.1 bar HP compressor cut-in pressure 295 295 bar HP compressor cut-out pressure 300 300 bar Generator run-on time 15 15 s Bundle cut-in pressure (Logo control) 270 280 bar Bundle cut-out pressure 300 295 bar Maintenance timer 4000 4000 h

Condition: new, sheet thickness: 1.8bending length: 2050upper roll diameter: 95 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: Dslsd Ab Tvjip T Dtekl - Back roll with motor EURO 825,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Body cover EURO 432,-- - Hardened rolls EURO 940,-- We have many references!

Condition: refurbished (used), Year of construction: 2004, operating hours: 11,200 h, Functionality: fully functional, Machine is fully functional Dslip T Dowglz Tetokl

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, Durma hydraulic press brake type AD-S 2060 Built in 2007 Working length 2050 mm Dolijwdxb Uep T Dtskl Press force 60 tons Cybelec control Modeva 10S CNC controlled Y1 Y2 X R Z1 Z2 With tools

Condition: excellent (used), Year of construction: 2023, operating hours: 120 h, Functionality: fully functional, input voltage: 400 V, throat depth: 609 mm, overall weight: 1,500 kg, Hydraulic press HAEGER - 824 MSPe standard: • stable pressing force +/- 2% • system for achieving full hydraulic efficiency • Full hydraulics; PLC electric control, saving electric energy • STOP function for cylinder • TIS tool protection system • new design of the lower part of the machine, more ergonomic • memory for up to 100 programs • prepared for quick change of automatic tools optionally mounted on the machine • new MAS 350 feeder with a range from M1.5 to M10 and pin lengths up to 40 mm • MSTP-4 hand tool set - 33 elements - includes J Frame • 4-tool turret head HAEGER - 824 MSPe technical data: - adjustable pressure up to 72 kN - repeatability +/- 2% of the set force - overhang 610 mm - adjustable stroke up to 220 mm Dkolipewglc Ds T Dtjl - number of strokes up to 2000 strokes / h - pin range up to M12 - clinching up to 6 mm - joining materials (dedicated tools required) - oil quantity 83 L - Engine 5 HP - 400 V, 3-phase, 50Hz electrical connection Machine available immediately

Condition: used, Year of construction: 2004, AMADA laser cutting machine is in good condition, one owner, always serviced on time by AMADA service representatives. The complete set is being sold. All documentation and service reports are included. The laser cutting machine is connected, it can be inspected and tested. Specification: Model: AMADA LASMAC LC2415 A3 NT Year of manufacture: 2004 Made in: Japan Power: 2kW Working area (X x Y): 1500 x 3000 Weight: 6.3 T Dkelip Tewdwapo Dtjl Working hours: 61,983 If you have any more questions, we will be happy to answer them.

Condition: used, Year of construction: 1992, Functionality: fully functional, total height: 3,852,626 mm, AMADA PRESS BRAKE HFBO 4M125T YEAR 1992 Djlipjwdw Ugo T Dtokl MACHINES DISCONNECTED SOLD AS IS WITHOUT WARRANTY

Condition: new, sheet length: 3.200sheet thickness: 10cutting area width: 3200total power requirements: 15weight approx.: 7700messurements (LxWxH): 3800 x 1820 x 1920 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Dkolipsvap Tho T Dtjl Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: excellent (used), Functionality: fully functional, Brother Hi-Spin riveting machine 5mm high spin Type: BR1-103 - Crimping ability (Mild steel rivet) φ5mm or less - Spinning head: 20-40mm - Distance between tabletop and punch: 60-180mm - Table working surface size: 310 x 180mm Dolip Tswdwv Ro Dtjkl - Processing time setting range: 0.3-5 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.2kw 4Pole Machine size Width 390 x depth 510 x height 1000mm Machine weight 95kg

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, total height: 2,510 mm, back gauge travel distance Z-axis: 1,000 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 100 mm, pressing force: 35 t, overall weight: 3,250 kg, operating speed: 10 mm/s, table width: 60 mm, bending length: 1,250 mm, travel distance Y-axis: 590 mm, working length: 1,250 mm, height adjustment type: electric, rapid traverse Y-axis: 110 m/min, Servo-electric press brake SAFANDARLEY type E-Brake Premium 35-1250 ES Manufacturer Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - stroke 300 mm - CNC control in Y1 / Y2 / X / R axes Dkolip T Dov Eam Nstel - rear bumper in 2 CNC axes - X and R - 2D graphic control - model EC20 - light curtain - programmable - WILA tool system - upper clamp - WILA tool system - lower clamp possible dies 4V / 2V / 1V / type T with a base of 60 mm Machine in very good condition after technical inspection by the manufacturer. Max. pressure kN 350 Max. bending length mm 1,250 Max. construction height Q, standard (without tool adapter and table) mm 650 Max. press stroke mm 300 Upper beam positioning accuracy mm +/- 0.01 Max. correction for Y1 - Y2 programmable mm +/- 2.50 Max. Y-axis approach speed* mm/sec 180 Max. bending speed* mm/sec 10 Max. return speed mm/sec 180 X-axis positioning speed mm/sec 350 Max. range of stop movement - X axis mm 550 Max. range of stop movement (second stop point) - X axis mm 575 Max. range of stop movement (third stop point) - X axis mm 1,000 Repeatability of back stop positioning mm +/- 0.02 Max. range of movement of the stop - R axis mm 150 Repeatability of positioning R axis mm +/- 0.10 Speed of positioning R axis mm/sec 100 Weight kg 3,250 Connected power kW 11 Machine length mm 2,230 Machine width mm 1,775 Machine height - transport dimension mm 2,510 Mains voltage 3/N/PE 50Hz – 400/230V Machine connected - ready for presentation at the headquarters in Warsaw. Immediate availability

Condition: new, sheet length: 3.200sheet thickness: 16cutting area width: 3200total power requirements: 22weight approx.: 10600messurements (LxWxH): 3800 x 1950 x 2080 Dolipjvap Tno T Dtskl Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)