Condition: reconditioned (used), HYDRAULIC GUILLOTINE SHEAR GADE MOD. CO 40/6 MACHINE FULLY RECONDITIONED CUTTING ANGLE ADJUSTMENT MOTORIZED BLADE GAP VISULIZATION STROKE REAR REGISTER CUTTING LENGTH MM 4050 CUTTING CAPACITY MATERIAL MAX MM 6 CUTTING ANGLE AT DEGREES 1° - 2° 30 ' REAR REGISTER MM 1000 SPEED MM/SEC 65 DISTANCE TRALE SHOULDERS MM 4150 INCH MM 500 WORKTABLE HEIGHT MM 930 ENGINE POWER KW 15 TANK CAPACITY LT 110 MOTORIZED REAR REGISTER MM 1000 DIMENSIONS MM 4550 X 2050 X 2280 (H) APPROXIMATE WEIGHT KG 10.000 USE AND MAINTENANCE MANUAL INCLUDED Dobolp Iths E Ibu Eskl CUTTING RECOVERY : -CLEANING of the machinery before disassembly. -Bench disassembly of the pair of BLADES with respective cleaning of the bench and anchors. -Polishing of the blade edge with stone with the purpose of removing small burrs. -Check condition of the BLADES and evaluation of the blade turn. -Remounting with respective adjustment and cutting test. -LUBRICATION check : -Check of the LUBRICATION SYSTEM and search for any leaks. -PUMP CLEANING*manual delivery and lubrication. -WASHING OF THE LUBRICATION SYSTEM and checking the efficiency of the NOZZLES. -Loading of LUBRICANTENUOUS oil and LUBRICATION test. LAMIER PRESSURE restoration : -Bench disassembly of the PISTONS. -Polishing of the stem with the aim of eliminating small "seizures." -Cleaning and polishing of the sliding chamber. -Replacing the SEALS with new ones. -Reassembly of each individual piston and bench test. -Reassembly and shear test. Checking OLEODYNAMIC CYLINDERS : -Oil leakage monitoring. -Check of delivery and return PIPES with respective fittings. -Check of "anchors" and support brackets. -Shear test at MAXIMUM PRESSURE in order to check for possible failure or cracks in the seals. OLEODYNAMIC PIPES check : -Monitoring of hoses and respective fittings. -Check for possible leaks with contrast liquid OLEODYNAMIC POWER PLANT check : -Complete washing of the OLEODYNAMIC PLANT. -Control unit TANK cleaning. -Replacement of FILTER. -Bench cleaning of control VALVES with respective replacement of RING SEALS with new ones. PAINTING in original colors : -Complete degreasing of the machinery using NITRO DILUENT. -Plastering and shaving of the most obvious parts. -Application of BASE. -POLISHING of the components. -EPOXILICARAL varnishing. REAR REGISTRY check : -Dismantling crankcases suitable for checking and cleaning the moving parts. -Lubrication of SCREWS and SCREWS. -Adjustment of BEATS. -Functional check with possible restoration of MICRON. Securing FIXED PROTECTIONS: -Replacement of front PROTECTION with NEW one suitable for the type of work. -Application of existing SIDE PROTECTIONS. Electrical SAFETY : -Application of PEDESTRIAN with EMERGENCY restraint and 5 m cable. -Replacement of the CONTINUOUS system on the control panel with application of EMERGENCY to Restraint. -Control of safety MICRONs.

Condition: used, Year of construction: 1985, total width: 2,200 mm, total height: 1,900 mm, total length: 2,300 mm, Weight: 2.500 kg Dsb E Ibuowga I Ij Eokl - Model: Eccentric - Max. working width: 1500mm - Back gauge: 1 - Max. sheet thickness: 7mm - Year: 1985 - Documentation available: No - Serial number: 11111358 - Control: Conventional - Transport dimensions: 2300mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: good (used), Year of construction: 1995, Functionality: fully functional, Make TIMAC . Technical data: . Cutting capacity 37 kG/mm“ 5 mm Cutting capacity 70 kG/mm“ 3 mm Cutting speed 35 m/min Round diameter 180 – 1200 / 1600 mm Flanging / folding see brochure copy! Dimensions: W x D x H approx. 2.7 x 1.1 x 1.5 m Weight approx. 1250 kg . Equipment: Pneumatic clamping and centering Hydraulic blade feed Hydraulic pressure on machine adjustable Cutting time adjustable EMERGENCY OFF Dkebjwgag Re E Ibu Eel .

Condition: used, Year of construction: 2006, Brake force 300 tons Working length 6100 mm Distance between uprights 4550 mm Throat depth 400 mm Punch stroke 320 mm Table width 220 mm Fast speed (0 – 100) mm/sec Woriking speed (0 - 7) mm/sec Upstroke speed (0 – 90) mm/sec Hydraulic pressure (max) 255 bar Dkob E Ibswhcycju Eel Main electric motor 18,5 KW Length 7500 mm Width 2900 mm Height 3700 mm Weight (aproxim.) 32000 Κgr

Condition: new, sheet thickness steel (max.): 10 mm, roller diameter: 190 mm, bending length: 1,070 mm, – Capacity 1070 x 10 – Bending force capacity 1070 x 9 – Electrically adjustable rear roller – Electrically adjustable lower roller (material clamping) – Digital display for rear roller movement – Digital display for lower roller movement (material clamping) – Hardened rollers – Conical rolling – Removable upper roller – Central lubrication system Dkob E Ibusvvczds Ejl – Brake motor – Emergency stop – Documentation – 400V

Condition: good (used), Functionality: fully functional, profile shears NUD 500 Sheet metal shears: - cut sheet metal up to 20 mm thick - cut flat steel up to 120x20 mm Dkob E Ibewhgnkju Eol Profile shears cut: - round steel dia. 50 mm - square steel 45x45 mm - profile steel: - L cut perpendicular 120x120x13 mm - L cut oblique 45 to 90 ° 90x90x11 mm - T cut perpendicular profile number (mm) 12(120x13) - T cut oblique profile number (mm) 9(90x10) The punch punches: - holes dia. 30 or 25 mm in sheet metal 15 or 20 mm thick

Year of construction: 2023, Condition: new, AXA MOVING CYLINDER ELECTRO-HYDRAULIC PRESS. 150-ton power. Automatic double speed with rapid. Moving cylinder stroke 816 mm transverse. Internal clearance from shoulder to shoulder mm 1500 Rod stroke mm 300 Dksbjlruhds E Ibu Ejl GALTECH distributors. - 2MP block. - No. 2 VIVOIL external gear unidirectional pumps. One for rapid approach and return (calibrated at 20 bar) and one with adjustable pressure with handwheel to set the required power. - Pressure relief valve with mechanical lock to prevent overpressure. - Standard pressure gauge to display power output. - INTECH electrical panel certified according to current regulations and with independent CE marking.

Condition: used, Year of construction: 1994, total width: 2,100 mm, total height: 1,850 mm, total length: 3,700 mm, Weight: 5.000 kg Price: On request - Model: Hydraulic - Max. working width: 3070mm - Throat depth: 0mm - Back gauge: 1 Deb E Ibuswf Uy Nj Eskl - Max. sheet thickness: 7mm - Year: 1994 - Documentation available: Yes - Serial number: 94G360 - Control: CNC - Motor power: 9.0kW - Transport dimensions: 3700mm x 2100mm x 1850mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: Modell:R65-360-7-EM, number of straightening rollers: 7, conveyor belt width: 360 mm, straightening roller diameter: 65 mm, material thickness: 4 mm, feed roller diameter: 65 mm, power: 0.002 kW (0.00 HP), overall weight: 1,500 kg, material width: 360 mm, operating speed: 20 mm/s, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, warranty duration: 12 months, Equipment: documentation/manual, Technical specifications / equipment of the straightening machine: • Strip width 30 - 360 mm • Strip thickness from-to 0.6 - 4.0 mm • Strip thickness throughput: max. 4.00 mm • Max. straightening cross-section: 800 mm2 at R02=350 Nmm2 or 150 x 4 mm • Straightening speed: 2 - 20 m/min • Number of straightening rollers: 7 • Straightening roller diameter: 65 mm • Number of draw rollers: 2 • Draw roller diameter: 65 mm • Motor power: 2.2 kW/3x400V RK machine body in a very stable and torsion-free welded construction RZ straightening and draw rollers, made of high-quality steel, surface-hardened and finely ground Djb E Ibuowhgino Eskl mounted in maintenance-free roller bearings AG drive, via spur gear motor with double chain drive EM self Variable speed drive via frequency converter with WM position measuring system, belt loop control for self-regulating drive, with ultrasonic sensor and sensor in the belt loop RZ straightening roller adjustment, individually manually adjustable and readable via dial gauges RO discharge roller cage, fixed with a radius for 3 mm material thickness PZ pneumatic tension roller adjustment, operated from the control panel BSF-ze belt side guide, manually adjustable centrically and eccentrically by 25 mm SS-2 interface to the press:

Condition: used, Rohrendumformer make Langbow length 1800 x width 800 x height 1500 mm stroke 300 mm clamping way 55 mm 5,5 kw 380 Volt FZLPEZ3MJMZ Deb Eec R N D Uj Ibu Eokl

Condition: new, sheet thickness steel (max.): 3 mm, roller diameter: 95 mm, bending length: 1,070 mm, - Capacity 1070 x 3 mm - Conical rollers Dkjb Ejwhgm To Ibu Eel - Pivoting top roller - Foot pedal control - Brake motor - Emergency stop - Documentation - 400V

Condition: good (used), Functionality: fully functional, sheet thickness steel (max.): 16 mm, bending length: 2,000 mm, working length: 2,000 mm, sheet length: 2000 mm rolled sheet thickness 16 mm upper roller diameter: 270 mm lower roller diameter: 260 mm Dobjwhgm Hj E Ibu Eskl

Condition: new, OMEC 3-roll mechanical symmetrical rolling calender. New "CE. Made in Italy. Ready for delivery except sold. General characteristics. Working envelope : mm 1330. Upper and lower roller diameter : mm 90. Side rollers diameter : mm 95. Thickness : mm 2 - 2.5 - 3. (1.5 X D 3 X D 5 X D ). Hardening of rollers HRC : 55/60 depth 2 mm. Installed power : Kw 1.1. Dimensions : mm 800 x 2100 x h 1100. Weight : Kg 490 The FX3.2 series distinguishes MECHANICAL CALENDERS with 3 ASYMMETRIC ROLLERS with simple complete invitation. The side roller (bending roller) is motorized as standard, for raising and lowering. The rotation of the rollers in these machines is applied to the upper and lower rollers by a self-braking motor coupled with a gearbox. Manual clamping of the sheet ,is performed by the bottom roller ,by a straight up-and-down motion using a bearing system. All machines are equipped with a movable control pedal board as standard. Dkjb E Ibjgyk Sueu Eol The simple operation of these machines, combined with the roll hardening and conical device, is an excellent compromise between quality and economy of processing. Equipped with the machine Optionals supplied : Front conical device. No. 01 digital display for side roller position.

Condition: used, Year of construction: 1984, total width: 2,000 mm, total height: 1,700 mm, total length: 3,800 mm, Weight: 5.500 kg Price: On request - Model: Hydraulic - Max. working width: 3050mm - Back gauge: 1 - Max. sheet thickness: 6mm Deb E Ibuswf Uy Aj Eskl - Year: 1984 - Documentation available: No - Serial number: 65441 - Control: Conventional - Transport dimensions: 3800mm x 2000mm x 1700mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Dksbswf Ti Ae E Ibu Esl Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Year of construction: 1998, Condition: reconditioned (used), Machine is in very good condition. Capacity, Ø mm / 90 x 5 Dksb E Ibsh I Dtweu Ejl radius, min./max. / 50/400 Bending Rate/Repeatability / 40º/s. ±0.1° Mandrel length 4 000 Weight, kg 10 000 Machine dimensions 6.7 x 1.7 x 1.8 Engine kW / 40 Length feed 900 mm/sec Tolerance degree 0.05-0.1°/mm Tools: 48.3-50-57-88.9mm

Condition: new, - Capacity 2070 x 7 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital display for rear roller movement - Digital display of the bottom roller movement (material clamping) - Hardened rollers - Conical rollers - Swiveling top roller - Brake motor - Emergency stop Dksb E Ijn Ryfwebu Eel - Documentation - 400V

Condition: new, Year of construction: 2025, Technical Data / Equipment Straightener: R65/360 • Strip width 30 - 360 mm • Strip thickness from-to 0.6 - 4.0 mm • Strip thickness throughput: max. 4.00 mm • Max. straightening cross-section: 800 mm2 at R02=350 Nmm2 or 150 x 4 mm • Straightening speed: 2 - 20 m/min • Number of straightening rollers: 7 • Straightening roller diameter: 65 mm • Number of draw rollers: 2 • Draw roller diameter: 65 mm • Motor power: 2.2 kW/3x400V RK machine body with a very stable and torsion-free welded construction RZ straightening and draw rollers, made of high-quality steel, surface-hardened and finely ground mounted in maintenance-free roller bearings AG drive, via spur gear motor with Double chain drive EM self-regulating drive, via frequency converter, with WM position measuring system, belt loop control for self-regulating drive, with ultrasonic sensor and sensor in the belt loop RZ straightening roller adjustment, individually manually adjustable and readable via dial gauges RO discharge roller cage, fixed with a radius for 3 mm material thickness PZ pneumatic tension roller adjustment, operated from the control panel Deb E Ijwhfxzebu Ejkl BSF-ze belt side guide, manually adjustable centrically and eccentrically by 25 mm SS-2 interface to the press:

Condition: new, OMEC 3 rollers mechanical symmetrical double invitation rolling machine New "CE Made in Italy USEFUL IN WORK mm 2050 DIAMETER OF THE UPPER ROLLER mm 150 LOWER ROLLER DIAMETER mm 150 LATERAL ROLLER DIAMETER mm 150 MAX CALENDER THICKNESS 1,5 x D mm 4 MAX CALENDER THICKNESS 3 x D mm 4,5 MAX CALENDERING THICKNESS 5 x D mm 5 MACHINE DIMENSIONS : mm 920 x 3400 x 1100 TOTAL POWER INSTALLED : Kw 6,5 WEIGHT : KG 1700 The FX3-3 series distinguishes the mechanical asymmetrical 3 ROLLERS calenders with simple FULL INVENTORY. The side roller (bending roller), is assembled as standard with steel supports and bearings and on the outside bronze pads which guarantee maximum reliability and minimum friction. ensure maximum reliability and minimum friction over time. The rotation of the rollers is applied to the UPPER and LOWER rollers by means roller by means of reducer and self-braking motor, as well as the translations and the sheet metal clamping by means of motors and reducer of the best brands. reducer of the best brands. Equipped with roll hardening, motorized translation and clamping, prearrangement for mounting curved rollers and conical device conical device positioned directly in the upper roller, they are today the best compromise of absolute quality and easy easy to use by the operator for the most varied cylindrical and conical calendering processes. Dsb Esgyk S As Ibu Eokl As standard, the upper roll is opened from the side in order to extract the rolled plate. MACHINE CONFIGURATION: MOTORIZED UPPER AND LOWER ROLL in rotation with equal power. [...]

Condition: used, Year of construction: 2000, total height: 2,400 mm, total width: 2,200 mm, total length: 3,500 mm, Weight: 11.000 kg Price: On request Controlled axes: Y1-Y2 + X-R-Z1-Z2 + I+Crowning Wila Hydraulic clamping Angle-measurement - Distance between columns: 2800mm - Number of axes: 6 - Throat depth: 410mm - Back gauge: 1 - Power: 130.0ton - Max. working width: 3050mm - Year: 2000 - Documentation available: Yes - CE mark available: Yes - Serial number: 885669 - Control: CNC - Transport dimensions: 3500mm x 2200mm x 2400mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren Djb E Ibewf Uxlsu Eskl

Year of construction: 2022, Condition: ready for operation (used), General Data Measurements width 71 Measurements depth 164 Measurements height 178 Dob E Ijwf Sk Esbu Eekl Machine weight 1320 Control Unit Brand HACO Model K210 Main Drive Main motor power 5.5kw This HACO Kingsland 60p was manufactured in 2022. Consider the opportunity to buy this HACO Kingsland 60p sheet metal machine. Contact us for more information. Application Types Punching

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, bending angle: 182 °, bending radius: 400 mm, total length: 7,000 mm, total height: 1,800 mm, total width: 2,200 mm, thorn length: 4,000 mm, overall weight: 16,000 kg, pipe diameter: 127 mm, type of input current: three-phase, wall thickness: 5 mm, feed length Z-axis: 4,000 mm, motor voltage: 400 V, Equipment: documentation/manual, Capacity, Ø mm / 127 x 5 Radius, min./max. / 50/400 Bending speed/repeatability / 40º/s. ±0,1° Mandrel length 4 000 Dksb E Ibuju Rf E Eo Eel Weight, kg 16 000 Motor kW / 40 Length feed 900 mm/sec Degree of tolerance 0.05-0.1°/mm Tools: 63 mm

Condition: excellent (used), Year of construction: 2007, Synchronized hydraulic press brake MECOS Mod. Syncro 200/4000. Numerco ESA KVARA control. NR.07 Controlled axes (Y1-Y2-X-R-Z1-Z1-Z1) WILA automatic compensation table. Pneumatic tool attachment: Type Promecam, Tecnostamp H=150 mm. Useful bending length: mm 4050. Power exerted: Ton 200. Front safety devices: DSP LASER. Dkjbov S Ad Re E Ibu Eol Weight: kg 24,000.

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: A0051, laser power: 2,000 W, Year of manufacture 2005 Laser power 2000 W Working area 3000 x 1250 mm Control Siemens Sinumerik 840D Complete with integrated automatic loading/unloading system STANDARD EQUIPMENT: Automatic pallet changer Quick change laser cutting head with 5" lens Quick change laser cutting head with 7.5" lens Automatic sheet position detection system Programmable cutting gas selection and pressure Conveyor belt for small parts/waste Work area lighting Dob E Ibujvclz Hj Eekl Positioning laser diode Oil spray device Autolas plus Hi-Las Automatic shutdown function TFT color screen RJ45 network connection Multi-chamber extraction system Dust extractor Cooler Light barrier safety system The resonator was replaced in 2007 and Trumpf installed a UV light beam ignition amplifier installed.

Condition: reconditioned (used), Year of construction: 2007, Amada LC-3015 X1 NT - Deflection type (X/Y axis): Flying optics - Travel (X): 3100 mm - Travel (Y): 1550mm - Vertical movement (Z): 120 mm - Cutting speed: 0-30 m/min - Travel speeds: (X and Y axis) 85 m/min, (Z axis) 25 m/min - Position Tolerance: (X/Y axis): 0.005mm/500mm, (Z axis): 0.1mm/100mm - Maximum workpiece dimensions: (L x W x H) 3150 x 1525 x 19 mm Dkeb Esh I Dtpo Ibu Eol - Maximum weight allowance: 690 kg - Maximum steel thickness: 20 mm - Maximum thickness of stainless steel: 15 mm (oxygen cut),12 mm (clean cut) - Maximum aluminum thickness: 12 mm - Number of pallets (pallet changer): 2 pcs. - Pallet change time: approx. 25 seconds - Dimensions of the laser cutting machine: (L x W x H) 6670 x 3260 x 2100 mm - Dimensions pallet changer: (L x W x H) 3430 x 2310 x 850 mm - Laser cutting machine weight: 9900 kg - Pallet changer weight: 1800 kg - Power supply: (machine + resonator) 71 KVA - Controller: LC20BP2 laser resonator - Manufacturer: MITSUBISHI - Model: ML40CFX - Nominal power: 4 kW - Stability: +/- 1% - Maximum power: 5 kW - Frequency range: 10 - 3000 Hz - Laser type: C02 laser - Operating hours: discharge 23,000h - Total mirror revision recently done