Round bending machine

OSTAS SMR-S 1070 x 190

Condition: new, sheet width 1070 mm plate thickness 9.0 / 10,0 mm distance between columns 1070 mm diameter of upper rolls 190 mm pre-bending capacity 9,0 mm Kdsdpfx Agew In A Iotol connected load 5,3 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,7 x 0,92 x 1,2 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2023, sheet width 1540 mm Kdedsvx Uvxjpfx Agtol plate thickness 4 mm upper roll diameter 110 mm diameter of lower rolls 110 mm bending roll diameter 110 mm total power requirement 1,1 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 2,5x0,6x1,1 m New machine Cone bending equipment, hardened and ground rollers, motorized bending roller stationary control panel, digital display bending roller right and left, digital display bottom roller

Condition: good (used), Year of construction: 1990, From liquidation: Mössner Rekord SSF 520 Year of construction 1990 Kjdpfxoviym Ds Agtjdl NR.27968 Stepless speed from 15-2350m/min 4 gears Band welder BSSO25 Air pump Work light Grinding stone Table swivels left15°-right45° Table size 790x740mm Clearance vertical 390mm--horizontal 500mm-- Height of the machine 2100mm Weight approx. 700kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 11383, type of input current: three-phase, working range: 3,000 mm, overall weight: 17,000 kg, input voltage: 400 V, cutting speed: 2,000 mm/min, total width: 4,500 mm, total height: 5,500 mm, total length: 22,400 mm, track width: 1,400 mm, repeat accuracy: 1 mm, workpiece weight (max.): 30,000 kg, warranty duration: 6 months, input frequency: 50 Hz, open-circuit voltage: 400 V, ambient temperature (max.): 45 °C, Secondhand SPC3000 - HGG Profiling Equipment B.V. Are you ready to automate your workflow, but not ready for a heavy investment in pipe cutting machinery? We have an interesting opportunity for you. This 2014 SPC3000 (40 Ton) pipe cutting machine is highly versatile. The machine is capable of cutting pipes from 300mm - 3000mm diameter and is equipped with a lot of extra features: - 4x 10 Ton pipe trolleys (300-2500 mm OD) (1 of them is a driven pipe trolley) - 2x 20 Ton pipe support (2500-3000 mm OD) - Plasma marking system Kjellberg Finemarker Ksdpfxori Slmo Agtodl - Punch marking system - Can handle 18 meter long pipes - Plasma cutting system Kjellberg FF450 - Oxyfuel cutting process - Additional touch screen remote control attached to main drive - 3 Point fume exhaust system The SPC3000 is used by our eXperience Center and maintained by our best engineers at our headquarters in The Netherlands. The machine has a proven record and is used to profile pipes for clients in several high demanding industries f.i offshore, piping, structural steel and the vessel industry. A lot of special projects have been profiled on this machine.

Condition: excellent (used), Year of construction: 2014, sheet width 2600 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight ca. 5000 kg Dimensions (only the machine) ca. 3500 x 1550 x 1400 mm very good condition (!!) current new price incl. accessories approx. 120.000 Euro special price on request Equipment: - robust electro-hydraulic 4-roll round bending machine - 4-roll concept offers a wide range of bending and rounding options - Swivel-mounted control unit Kdodpfx Agoylpz Hjtol * Operation - control of all rollers or machine axes * Digital position display of the side rollers * Manual operation via JOY sticks - Two central rollers are driven directly via hydraulic motors - Conical rolling possible by tilting the rollers - Parallelism of the side rollers via torsion shafts - Bending on both sides - diameters of up to 1.1 times the top roller diameter are possible - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Sturdy welded steel construction - electro-hydraulic hinged bearing for easy pipe removal - pressure gauge / pressure display for the rollers - Safety device (safety line with switch unit) - operating instructions * Special accessories included : - ROCCI height-adjustable center support * for large pipe diameters - ROCCI electro-motorized material feed table * motorized sheet feeding material support surface

Condition: new, Year of construction: 2026, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, empty load weight: 4,500 kg, - 4 rolls - Capacity: 2070 x 10 mm - Bending capacity: 2070 x 8 mm - Hardened rolls - Top roll diameter: 220 mm - Bottom roll diameter: 220 mm - Side roll diameter: 180 mm Kjdper H Df Ijfx Agtsdl - Hydraulic - Digital display for left roll movement - Digital display for central lower roll movement - Digital display for right roll movement - Hydraulic up and down movement system with intermediate and central roll - Hydraulic indicator for easy roll positioning - Hydraulic up and down movement system with intermediate and central roll - Top roll hydraulically swing-out - Steel construction ST-52 - Hydraulic drop-end for easy roll positioning - Hydraulic up and down movement system with central and side rolls - Hydraulic balancing system - Overvoltage protection - Documentation - 400V

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1550 mm plate thickness 6.5 mm Kdjdpfx Agexabkbotel pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: new, Year of construction: 2025, Seam welding Ksdpfxjh Nu A Ns Agtsdl

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Kjdpfxoyzt Nzs Agtedl Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Price is for the entire unit.

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front Kdjdexacdvopfx Agtol * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)