Condition: good (used), Year of construction: 1989, Georg Noll Reel V 300 AE - max. load: 300 kg Creln S N Ejvbwkwjgeb - V: 500 Hz Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection: Basically, I would like to point out that the item can be inspected and tested under power before purchase in order to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be contacted at any time on the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 923, Manufacturer: Stierli-Bieger AG (Switzerland) Model: 2 x 820 FP Serial number: 923 Year of manufacture: 2016 Technical data: • Machine weight: 4300 kg • Max. working pressure: 820 kN Cjln Sov Exz Ss N Egerb • Stroke length: 270 mm • Motor power: 7.5 kW • Power supply: 3 x 400V, 20A, 50 Hz Condition: Used, but fully functional.

Condition: ready for operation (used), Year of construction: 2011, Available immediately from location: CNC press brake Bystronic 5-axis controlled Type Xpert 100 x 2050 Year of manufacture 2011 Pressure capacity 100 tons Working length 2050 mm Column clearance 1700 mm Thrust 400 mm Stroke 315 mm Installation height 800 mm Rapid traverse from 220 mm/sec Working speed 20 mm/sec Crolowha I Ron S N Egob Rapid traverse up 220 mm/sec Drive 7.5 kW Weight 8 tons Complete tools Price ex location: €24,000 plus VAT

Condition: used, Year of construction: 2011, operating hours: 30,186 h, Functionality: fully functional, machine/vehicle number: A0215A0156, laser power: 2,500 W, laser hours: 13,800 h, sheet thickness aluminum (max.): 5 mm, sheet thickness steel (max.): 15 mm, total length: 3,078 mm, total height: 76 mm, total width: 1,550 mm, workpiece weight (max.): 575 kg, overall weight: 9,420 kg, type of input current: three-phase, The machine is ready for use and serviced by Trumpf, but no longer connected to the network and is in storage. Crolsv Hmc Tjn S N Egeb The price includes a Schmalz lifting device with a load capacity of 500 kg. The machine is sold ex works.

Condition: good (used), Year of construction: 2020, machine/vehicle number: 20200318P0258A, laser power: 2,000 W, repeat accuracy: 0.02 mm, feed length X-axis: 1,500 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 220 mm, Maximum power: 2 Kw X-travel: 1500 mm Y-travel: 3000 mm Z-travel: 220 mm X/Y positioning accuracy: ± 0.05 Celn S N Ejwhat Tsgsrb X/Y repeatability: ± 0.02 Max table load: 1500 kg IPG laser source: YLR-2000-MM-WC

Condition: excellent (used), Year of construction: 2018, operating hours: 3,200 h, Functionality: fully functional, repeat accuracy: 0.01 mm, travel distance X-axis: 3,002 mm, travel distance Y-axis: 1,502 mm, travel distance Z-axis: 300 mm, positioning accuracy: 0.02 mm, workpiece weight (max.): 4,500 kg, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 300 mm, operating pressure: 4,000 bar, cutting speed: 8,000 mm/min, power of the servo motor: 2,000 W, table load: 4,500 kg, compressed air connection: 6 bar, material thickness: 300 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, Machine: STM 1530 PremiumCut 3D 12° angle compensation Pump: BFT ECOTRON® 40.37 (37 kW, 4000 bar) Great condition, fully functional, purchased new in October 2018. Machine is located in EU, Zagreb, Croatia, possible cutting test at our place. Only 3200 pump operating hours, automatic pressure control, automatic abrasive control, cutting angle compensation, possible upgrade with turning machine and drilling unit for piercing sensitive materials, durable machine frame (aluminium alloy + stainless steel), equipped with high quality parts. 1. Waterjet cutting system STM 1530 PremiumCut 3D 12° angle compensation Robust CNC milled absolutely rust-proof construction in aluminium and stainless steel High-precision robust rack and pinion drive with helically toothed racks Premium guide X & Y axis with Bosch Rexroth™ with high-precision ball-bearing carriage and stainless steel balls Threefold dirt scraper package Working area accessible from 3 sides for simplified loading and unloading Underwater cutting is possible CNC milled workpiece holder with heavy-duty frame for parts with weights of up to 1,000 kg/m² The scope of supply contains the required lubricants and special tools for servicing and maintenance 1.1 CNC operating range X axis: ..... 1,502 mm Y axis: ..... 3,002 mm (bridge) Z axis clearance: ..... 300 mm A axis: ..... 12 degrees B axis: ..... +/- ∞ 1.2 Precision and feed Positioning precision: ..... ± 0.02 mm (per metre at 20°C) Repeatable precision: ..... ± 0.01 mm (per metre at 20°C) Max. feed: ..... 60 m/min A axis feed: ..... 360 deg/s B axis feed: ..... 360 deg/s 1.3 Dimensions & weight Length: ..... approx. 3,750 mm (incl. high-pressure tubing) Width: ..... approx. 4,700 mm Height: ..... approx. 3,400 mm (incl. high-pressure tubing) Weight: ..... 1,500 kg (without water) 2. High pressure pump ECOTRON® 40.37 420 MPa max. design pressure 400 MPa max. permissible operating pressure 380 MPa max. continuous operating pressure 3.8 l/min max. flow rate 37 kW driving power 2.1 Technical details Drive hydraulics with axial piston pump and hydraulic pressure/flow rate control Gear pump for separate cooler/filter circuit Pressure intensifier with drive cylinder and high pressure cylinder 2.49 litre pulsation damper according to Pressure Equipment Directive 97/23/EC Connection for external emergency stop circuit Electrical and electronic components fitted in control cabinet Hydraulic and high pressure components mounted on a common base frame Compact design, all tubing fitted, all pipework fitted and wired 2.2 Options Included Automatic pressure adjustment from 50 - 400 MPa Cooling via oil/water heat exchanger Pressure relief valve with pneumatic control Check valve on the feed water inlet Croln S N Eevla U Tegsb Double filter element for pre-filtration of the feed water Sound insulation casing Special tools for fitting the high pressure seals incl. torque wrench Water stop check valve Included: machine, high pressure pump, control unit (PC in electronic box), abrasive, spare parts

Condition: good (used), Year of construction: 1992, KEMMERICH V 300 AE reel - max. load: 300 kg Croln Sovbwk Ro N Egob - V: 50 Hz Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection: Basically, I would like to point out that the item can be inspected and tested under power before purchase in order to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood Crjlsvtgn Non S N Egeb in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 1991, Functionality: fully functional, Cutting length up to 4000mm Cutting capacity up to 7mm Adjustable backgauge by input Celn S Nev Sx I So Egsrb Immediately available Price net Shears can be inspected and tested.

Condition: used, Year of construction: 1999, weight max. 15 / 30 (einzeln/Set) t workpiece diameter 600 - 6000 mm gear diameter 520 mm Rotating speeds 130-1300 mm/min voltage 400 V Crsln Sjwf Rhio N Egsb total power requirement 2 x 1,1 kW weight of the machine ca. 1200 kg + 800 kg kg Serial No. 2953 Drive and idle unit equipped with rail rollers (can be dismantled if not required) Units are not from same original set and differ in height. Height floor - center of turning rolls 670/750 mm (Idle unit / drive unit)

Condition: used, Year of construction: 2010, sheet width 2100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm no. of strokes 42 Hub/min cutting angle 1 ° 50 table height 900 mm distance between columns 2200 mm column arm 100 mm Control ELGO engine output 7.5 kW weight of the machine ca. 2600 kg range L-W-H 2750 x 2180 x 1550 mm from a training workshop (!!) current new price approx. 30.000 euros special price on request Equipment: - robust / electro-motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - NC electro-motorized back stop * including ELGO NC digital control unit * back stop with recirculating ball screws - manual cutting gap adjustment (eccentric) Crsln S Novkx U As Egeb - machine side stand with projection - front finger guard - 1x hold-down bar - 1x freely movable foot switch including emergency stop button - 1x side stop including mm scale - 1x front support arm - rear sheet metal slide - rear safety device - operating instructions (PDF)

Condition: used, Rolling Machine Brand: JAMMES PROMECAM Creljwf Ndisn S N Egob Type: HC 1310 Maximum thickness: 10 mm Maximum length: 3040 mm Rolling capacity: 1500 mm Upper roller diameter: 300 mm Side roller diameter: 220 mm Working speed: 0 to 7 m/mm Hydraulic control 1 hp motor Hydraulic unit motor: 5.5 kW Weight: 7000 kg Dimensions: 5100 x 1000 x 1000 mm Type: 4-roller rolling machine

Condition: used, Year of construction: 2021, Bystronic fiber laser in excellent condition with automation and storage equipment. Manufactured in 2021 and only 4361h cutting hours. Available for immediate purchase. Viewing upon appointment. Technical description in the attached document. Working dimensions: 3000 x 1500 mm Laser output: 3000W Automation: Bystrans Extended Storage: ByTower with 11 cassettes Power on hours: 22634h Cutting hours: 4361h Steel: max 20 mm Stainless steel: max 12 mm Aluminum: max 12 mm Brass: max 6 mm Copper: max 6 mm Celn S Nowf I Hvs Egerb

Condition: good (used), Year of construction: 2012, Ref. -No.: 10469 Manufacturer: JAESPA Type: Comfort 420 A Year of construction: 2012 Storage location: Halberstadt Machine-No.: 233XXXXX Weight Of The Machine Ca.: 2500 kg Machine length: 2400 mm Machine width: 2800 mm Machine Height: 1700 mm Bending capacity square tube: 420 x 420 mm Bending capacity round bar: 420 mm Bundle min.: 215 x 65 mm Bundle max.: 420 x 170 mm Flat: 420 x 420 mm Roll diameter: 590 mm Saw band dimensions: 4100 x 1300 x 4780 mm Belt speed: 15 - 100 m/min. Operating pressure: 50 bar Flow rate: 6,5 l/min Tank capacity: 40 liter Crelswf Ikuen S N Egeb Coolant content: 50 liter Material support height: 800 mm Saw motor: 5,5 kW hydraulic motor: 0,75 kW coolant pump: 0,12 kW Chip brush: 0,09 kW Chip conveyor: 0,18 kW Measurement standard: DIN EN 23746

Condition: new, Year of construction: 2025, Tfon Leveltech® S-3513 Material Thickness (mm): 0-0,3 Maximum Material Width (mm): 1300 Minimum Material Length (mm): 70 Quick Change System for Straightening Rollers: Standard Cslnokyrzlj S N Egerb Flattening Gap Adjustment: Electromechanics/PC Control Overload Protection: Standard Screen: Touch CE-Certificate: Standard Machine Size (mm): 2685x1585x1820 Total Weight: 5.000 kg

Condition: used, For sale is a used Promecam press brake. The machine is particularly well-suited for the efficient processing of small parts and, thanks to its compact design, is ideal for smaller workshops and businesses. Technical specifications: Working length: 1.25 m Creln S Nowf E Sij Egob Press force: 25 tons 3 controllable axes Control: MB control (simple and practical) Included in delivery: Tool cabinet Tool set

Condition: new, pressure 135 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 200 mm/sec work speed 10.0 mm/sec return speed 120 mm/sec work stroke 275 mm dayligth 550 mm table height 900 mm table width 90.0 mm oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 8650 kg range L-W-H 4250 x 2050 x 2800 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen Croln S N Est D Hmiogsb * 2D graphical programming * 15" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: used, Year of construction: 1992, pressure 100 t chamfer lenght 3100 mm column daylight 2540 mm stroke 300 mm table height over floor 750 mm control DNC 90 total power requirement 8,6 kW weight of the machine ca. 8500 t Overall size ca. 3540x1240x2555 mm Machines type 391 Machine no.: 67 39130049 -4 controlled axes -crowning -Extended back gauge -pneumatic matrix displacement -hydraulic upper tool clamping -various tools -Tool cabinet Csln S Newf Dyxo Egjrb extra large stroke 300mm -various tools Machine does not have a valid UVV

Condition: used, Year of construction: 2021, Outstanding Bystronic press brake with mobile bending robot, both from year 2021. Can be viewed under power upon appointment in France and available for immediate purchase. Full technical description of the machine and list with included bending tools in the attached document. Maximum stroke: 200 mm Working length: 1030 mm Maximum pressure force: 400 kN Machine weight: 4000 kg Operating hours MBR (robot): 4823h Creln S N Eswf I Exsgjb Operating hours press brake (1): 7695h

Condition: used, Year of construction: 1994, 1 ERMAKSAN AP 3600x160 press brake Counter backgauge is defective, 16mm die opening has a crack, with 30° knife, bending length 360cm, max. stroke 180mm, max. pressure 1000kN, self-disassembly Crolnowf Dxnj S N Egob Color: gray Year of manufacture: 1994 Dimensions L/W/H: 380x200x260cm Weight in kg approx.: 12000 Condition: used

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm Csln S N Eora Rrhegerb table height 850 mm x-axis 550 mm travel R-axis +/- 50 weight ca. 3600 kg a lot of lower and upper tools incl. work light

Condition: used, Year of construction: 2021, Outstanding Bystronic press brake from 2021 including a large set of bending tools. Can be viewed under power upon appointment in France and available for immediate purchase. Full technical description and options in the attached document. Maximum stroke: 450 mm Working length: 3,100 mm Maximum pressure force: 1,500 kN Machine weight: 13,200 kg Coln S N Eowf I Erogerb Operating hours: 6800h

Condition: used, Year of construction: 1990, 1 ATLANTIC ATS 3006 Hydraulic Guillotine Shear Max. cutting length 350 cm, steel up to 6 mm, stainless steel up to 3 mm, self-disassembly Crolnjwf Dwde S N Egsb Color: gray Year of manufacture: 1990 Dimensions (L/W/H): 360 x 230 x 160 cm Weight in kg approx.: 4500 Condition: used

Condition: used, Year of construction: 2021, Great opportunity to buy a high power Bystronic fiber laser with automation build in June 2021. This machine is in excellent condition and can be inspected under power upon appointment. Availability: 10/2025 More information on request. Please note: Crjlsv Tb Iden S N Egob The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Laser power: 10000W Working dimensions: 3000 x 1500 mm Power on hours: 11800h Cutting hours: 4600h

Condition: used, 1 x MUBEA HIW 750 Flat Angle and Bar Shear with notching device and various tools, see pictures and inspection, self-assembly Color: gray Dimensions L/W/H: 300x170x170cm Weight in kg approx.: 1830 Condition: used Crjln S Njwf Dvye Egjb