Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, pressing force: 400 t, distance between stands: 3,400 mm, working length: 4,050 mm, TECHNICAL DETAILS Press force: 400 t Bending length: 4,050 mm Width between columns: 3,400 mm Speed: 37.5 rpm Motor power: 37 kW Axes and control system Axes: Y1 / Y2, X, R Crowning: CNC-controlled Backgauge: CNC-controlled Crowning device: Motor-adjustable via CNC control system Tooling Upper tool: 1010/A/75°, split offset Die: Multi-V die MACHINE DETAILS Dimensions (L × W × H): 5,750 × 2,110 × 3,440 mm Weight: approx. 25,000 kg Safety and handling equipment Laser protection device: on the upper beam Sheet metal support arms: 2 units on linear guides EQUIPMENT - CNC-controlled crowning - CNC backgauge Fslnowd Nguo Ntifegb - 2 sheet support arms on linear guides - Laser protection device on the upper beam - Offset, split upper tool - Multi-V die - Y1/Y2, X, and R-axis control - Operating instructions

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, pressing force: 152 t, working length: 3,100 mm, Valid until 10/2025 TECHNICAL DETAILS Press force: max. 1,500 kN Working length: max. 3,100 mm Diameter: 690 mm Upper beam stroke: max. 300 mm Speeds Upper beam drop speed: 100 mm/s Upper beam pressing speed: 10 mm/s Upper beam return speed: 100 mm/s Backgauge Backgauge range: 600 mm Number of backgauge axes: 6 Compressed air Fgslnswffkxe Ntifjb Compressed air consumption for sheet thickness measurement: 0.0002 m³/min at 6 bar MACHINE DETAILS Length: 4,360 mm Width: 2,120 mm Height: 2,885 mm Weight: 12,800 kg Mains voltage: 3 x 400V/50/60Hz/N/PE Slow-blow fuse: 63 A Power consumption: 22 kW EQUIPMENT - Hydraulic tool clamping (top/bottom) - CNC-controlled bending aid - Safety light curtain - Sheet thickness measurement

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, sheet thickness (max.): 6 mm, cutting length (max.): 220 mm, cutting force: 250 t, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Sheet thickness: 6 mm Fslnowf It As Ntifegb Pressure: 250 t Blade length: 220 mm Stroke length: 24 - 26 mm Ram stroke: max. 32 mm MACHINE DETAILS Machine weight: 1,600 kg

Condition: refurbished (used), Year of construction: 2003, operating hours: 24,000 h, Functionality: limited functionality, bending radius: 300 mm, bending angle: 183 °, wall thickness: 8 mm, pipe diameter: 100 mm, pipe length: 4,100 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR Fgjln Ntstrd T Teifsb 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: new, - Working width 1020 mm Fsln Njcca Rgotifogb - Max. sheet thickness approx. 2,5 mm (St 40) - Max. Bending angle 135 Accessories: - segmented upper beam - Foot pedal for tensioning - instruction manual

Year of construction: 2009, Condition: ready for operation (used), General Data Measurements width 2980 Measurements depth 4000 Measurements height 2300 Machine weight 13000 Main Drive Main motor power 30 kw This Baykal HNC 3100x13 shearing machine was manufactured in 2009. It features a cutting capacity for St 42 at 13 mm and a cutting length of 3060 mm. Main voltage is 380/50/3 with a robust 30 kW motor. The machine's substantial weight of 13000 kg ensures stability and precision in operation. For more information about this shearing machine, please reach out to us. Felewikchsn Ntifsgb Application Types Shearing

Condition: used, Year of construction: 2025, I - beam section - flat steel 80 x 16 (d 1200) mm I-beam section - upend 50 x 15 (d 1000) mm L-beam 50 x 5 (d 1200) mm round material 40.0 (d 800) mm bar material dia. max. 70 x 2.0 (d 1600 ) mm square material 80x30x3 (d 4000) mm channels - flange UNP 80 (d 800 ) mm bending speed 4.4 m/min roll diam. toproll 157 mm bore 50.0 mm oil volume 18.0 Liter total power requirement 1.1 kW weight 485 kg Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers * Display with touchscreen function - hardened tool holder (42CrMo4) Fgolneu Rfqho Ntifob - machine base - 2x manually adjustable side guides - horizontal and vertical work possible - freely movable control panel - pressure gauge / pressure display for the rollers - CE mark / declaration of conformity - operating instructions in German

Condition: used, Year of construction: 1990, Hydraulic Guillotine Shear Manufactured by ATLANTIC, Type ATS 3012 Year of Manufacture: 1990 Technical Specifications Manufactured by ATLANTIC Type ATS 3012 Fgsln Newif I Eotifjb Year of Manufacture: 1990 Sheet Size: 3000 x 12 mm Cutting Angle Adjustment: 0.5 – 3 degrees Number of Hold-Down Clamps: 18 Length of Angle Stop: 1000 mm Working Height: 900 mm Motor Power: 22.5 kW Dimensions: Approx. L 4.20 x W 2.00 x H 2.20 m Weight: Approx. 8 t Features • Angle Stop • Manual Cutting Gap Adjustment • Automatic Cutting Angle Adjustment • Motorized Backgauge with Fine Adjustment All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, back gauge: 1,000 mm, sheet thickness (max.): 6 mm, cutting length (max.): 3,050 mm, cutting angle (max.): 2 °, TECHNICAL DETAILS Sheet width: 3,050 mm Sheet thickness: 6 mm Cutting angle: 2°30' - 0°30' Backgauge: 1,000 mm Power and hydraulics Strokes per minute: 11–24 Feln Newf Imijtifegb Oil capacity: 155 l MACHINE DETAILS Overall length: 3,700 mm Overall width: 2,500 mm Overall height: 1,900 mm Machine weight: 6,500 kg EQUIPMENT - Angle stop included - 3 front support arms included - Foot switch included

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, Equipment: BIHLER P-CNC 400 Control system BIHLER Aucoustic cabine Equipment front side: 1 slide feeding system right hand side 2 eccentricpresses 90 kN /each 2 wide slide units Equipment rear side: 1 cross feed system 1 RAZIOL band oiling system Foln Ntovgfn Isifsgb working range: wire diameter range: up to 4,0 mm stripmetal width: up to 60 mm stripmetal thickness: up to 4,0 mm feeding length: up to 120 mm outout: 5 - 350/min

Condition: good (used), Year of construction: 2006, Bystar 3015, built in 2006, CO2 laser 4.4 kW Table size 1500 x 3000 mm, incl. shuttle table, with new extraction system (Tehno filter) Glass overhaul in November 2015 Cutcontrol, Bypos, and Byvision are available. Fjljwifulon Ntifjgb Power on 50,000 hours, laser on 28,000 hours New Plexiglas New bellows Completely overhauled

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: EH320D, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness copper (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness (max.): 20 mm, roller (top) diameter: 350 mm, roller diameter: 450 mm, overall weight: 11,000 kg, total length: 5,200 mm, total height: 1,680 mm, total width: 1,700 mm, roller (bottom) diameter: 330 mm, bending length: 3,100 mm, type of input current: three-phase, working length: 3,000 mm, roller length: 3,100 mm, sheet width: 3,100 mm, working width: 3,000 mm, side roll diameter: 250 mm, working height: 800 mm, power: 11 kW (14.96 HP), bending radius: 250 mm, Equipment: documentation/manual, emergency stop, Hydraulic plate bending machine 4-roll capacity width 3000x20 mm thickness Brand MG model EH320 used machine year 2001 Bending capacity with dual Initial pinch planetary plate width 3000 mm thickness 20 mm pre-bend 16 mm minimum rolling ID 420 mm depending on plate thickness and strength. --- Length on the rolls 3100 mm top roll 350 mm lower roll 330 mm Fgoln Ntiowic A Hefsb side rolls 250 mm Power electric 15Hp voltage 380/50 Vac --- configuration Hardened surface of the 4 rolls Dual driven central rolls rotation hydraulic motorized with gear unit each roll. Conical plate bend hydraulic attachment for cone bending. Re-rolling device for calibration roundness of welded shells Front open hydraulic drop-end to unload the closed rolled plates Control console hydraulic commands with digital readout Digital position readout of side rolls Safety and emergency systems installed Manuals and schematics along with the machine

Condition: good (used), PUMA50/E-500 Power (T) 55 Crow's neck depth (mm) 500 Steel capacity (mm) Ø40x10 Cylinder stroke (mm) 0 - 60 Foln Ntijv Rgizofsgb Working height (mm) 810 Motor power (kW) 5 Oil tank capacity (L) 45 PUMA55/E-500 Dimensions (L x W x H) (mm) 1930 x 1200 x 1800 Weight (kg) 1885

Condition: used, Year of construction: 1981, Technical details: work height max.: 1100 mm voltage: 380 / 50 V total power requirement: ca. 15,1 kW weight of the machine ca.: 4,5 t dimensions electric cabinet LxWxH: 1,2 x 0,64 x 1,4 m dimension machine xH: 1,5 x 1,6 x 1,3 m The profile round bending machine can be used for bending thick-walled steel profiles, steel beams and steel rails. Fgeln Ntiowh Rq Nefjb The machine works on two gears: 0-4 rpm and 0-6,5 rpm. - 1x driven bending roller can be adjusted vertically by 140mm and - 2x drive rollers with centre distance 360mm - Right and left rotation of the rollers possible Equipment: - Hydraulic power unit, manufacturer TOS - control panel accessories: - various bending rollers without profile *

Condition: good (used), Year of construction: 2009, Functionality: fully functional, sheet thickness (max.): 6 mm, cutting length (max.): 4,050 mm, TECHNICAL DETAILS Sheet width: 4,050 mm Sheet thickness: 6 mm Control system: ELGO P50 Hydraulics and energy Oil volume: 300 l Total power requirement: 15 kW MACHINE DETAILS Machine weight: approx. 9,000 kg EQUIPMENT - Sheet support device included - 4 support arms included - 1 side stop included - Finger guard included - Light barrier behind the machine included Fgsln Nowf If Eotifob - Foot switch included

Condition: good (used), Year of construction: 2008, Hydraulic CNC press brake, capacity: 2000 x 50 tons 4-axis CNC Y1 Y2 X Z Cybelec ER 80 3D CNC Fgoln Newicxzetifob Machine dimensions: 2000 x 3250 x 2750 mm Pods: 5150 kg

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop Fjlju Icp Asn Ntifogb - back gauge with linear scale, operation with hand crank i.D. *

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, punching force: 28 t, workpiece length (max.): 1,000 mm, workpiece width (max.): 2,000 mm, TECHNICAL DETAILS Sheet width: 2,000 mm Sheet length: 1,000 mm Foln Ntiowf Ibtjfogb Punching force: 28 t MACHINE DETAILS Machine weight: approx. 11,000 kg EQUIPMENT - Various tools

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Fgolnju Ibvuj Ntifjb Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, pressing force: 125 t, throat depth: 300 mm, distance between stands: 3,050 mm, bending length: 3,550 mm, stroke distance: 240 mm, TECHNICAL DETAILS Pressure: 125 t Bending length: 3,550 mm Distance between columns: 3,050 mm Column overhang: 300 mm Ram stroke: 240 mm Hydraulics and Energy Oil volume: 200 l Total power requirement: 11 kW Control system Control system: Cybelec DNC 70 MACHINE DETAILS Overall length: 4,500 mm Fslswf H Tusn Ntifogb Overall width: 2,200 mm Overall height: 3,000 mm Machine weight: approx. 14,000 kg EQUIPMENT - Manual crowning available - 3 manual stop fingers available - Die shift available - Pneumatic top tool clamping available - Foot switch available

Condition: used, Year of construction: 2006, Technical details: bending angle max.: 75 ° working height: 850 mm operating voltage: 380 V Weight approx.: 1,0 t dimension machine xH: 1,9 x 2,6 x 1,0 m transport measurements machine: 2,6 x 1,8 x 1,0 m Single bending and double bending of reinforcing steel possible. Number of bending forms = 2 pieces Bending angle 40°; 60°; 75°. bar size: angle form=Ø 12 - 50mm and double angle=Ø 12 - 35mm Operation via control panel with touch screen bending plate: -Ø 480mm -speed= 7,5 / 15 rpm. -bending pin bore= Ø 48mm (16 pieces) -center pin=Ø 50 x 94mm Counterholder bars: -2piece length=840mm -Displacement per handrail 100mm Fslnou Ibu Re Ntifsgb -13 holes of size Ø 48mm Accessories: bending attachments 2x Ø 60mm; 2x Ø 78mm; 1x 96mm; 1x Ø 122mm; 1x Ø 160mm; 1x Ø 200mm 1x pin for plate 8x counterholder div. shapes 1x bending trough *

Condition: good (used), Year of construction: 1984, Functionality: fully functional, back gauge: 1,000 mm, sheet thickness (max.): 6 mm, working width: 3,000 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Sheet width: 3,000 mm Sheet thickness: 6 mm Backgauge: 1,000 mm MACHINE DETAILS Dimensions: 3,500 x 1,950 x 2,000 mm Machine weight: approx. 8,800 kg EQUIPMENT Fjln Ntiewf Hicjfsgb -Foot switch -Manual cutting gap adjustment

Condition: ready for operation (used), Year of construction: 1999, operating hours: 76,276 h, Functionality: fully functional, pressing force: 50 t, distance between stands: 1,040 mm, bending length: 1,270 mm, TECHNICAL DETAILS Pressure: 50 t Bending length: 1,270 mm Folding column width: 1,040 mm Control system Control system: Cybelec / Delem Controlled axes: y1, y2, x, R, z1, z2 MACHINE DETAILS Total power requirement: 8.6 kW Machine weight: approx. 4,750 kg Space required: approx. 2,000 x 2,100 x 2,400 mm Operating hours: 76,276 h EQUIPMENT - Side safety doors - Material support arms - Foot switch Fslowf Hh Esn Ntifegb - 4 manual stop fingers

Condition: ready for operation (used), Year of construction: 1996, operating hours: 92,992 h, Functionality: fully functional, pressing force: 160 t, stroke distance: 400 mm, controller model: Cybelec VisiTouch 19, surfacing fence length: 3,550 mm, Complete overhaul in 2024 TECHNICAL DETAILS Pressure: 160 t Bending length: 3550 mm Stroke: 400 mm Control: Cybelec VisiTouch 19 MACHINE DETAILS Weight: 15,400 kg Dimensions: 4,600 x 2,600 x 3,200 mm EQUIPMENT - Backgauge X, R, Z1, Z2, X1 - 2 front bending aids - Fiessler AKAS safety light barrier - Motorized CNC crowning Fgeln Nswfhm Ajtifjb - Pneumatic die shifting - 2 front table supports - Hydraulic punch clamping - Hydraulic die clamping

Condition: ready for operation (used), Year of construction: 1997, operating hours: 76,511 h, Functionality: fully functional, pressing force: 160 t, stroke distance: 400 mm, surfacing fence length: 3,550 mm, TECHNICAL DETAILS Pressure: 160 t Bending length: 3550 mm Stroke: 400 mm Control: Cybelec MACHINE DETAILS Weight: 15,400 kg Dimensions: 4,600 x 2,600 x 2,900 mm EQUIPMENT - Backgauge X, R, Z1, Z2, X1 - 2 front bending aids - Motorized CNC crowning - Pneumatic die shifting - 2 front table supports - Hydraulic punch clamping Fsln Njwfhh Tetifegb - Hydraulic die clamping