Condition: excellent (used), Year of construction: 2016, Bysprint Fiber 4020 Year of manufacture 2016 4000 fibers Working area: 2000mm x 4000mm Swivel table system Power on: 23,477 hours Laser on: 5,248 hours Immediately available Top condition Disassembly and commissioning possible. Video available upon request Dolq Aetrg Iheuvasut Immediately available.

Condition: used, Year of construction: 1992, Model Name Dslqsukv U As Auvaout PRM 30.135

Condition: good (used), Year of construction: 1995, Max. cutting length 3050 mm Material thickness 37 kg/mm² 12 mm Material thickness 70 kg/mm² 8 mm Cutting angle 1.8 degrees Stroke rate 8 - 13 min. Number of hold-down clamps 12 Drive power 18.5 kW Dimensions L x W x H 4150 x 1950 x 1950 mm Weight 8000 kg Accessories / Special features: • ELGO Type 71 motorized NC positioning control for the backgauge, length approx. 900 mm • If necessary, the toggle lever system allows the machine to operate with only one cylinder at a reduced cutting capacity of approximately 55% of the nominal capacity. This simultaneously increases the cutting sequence for more efficient work with thin sheet metal. Switching from fast to slow is done using a selector switch on the control panel. • Hydro-mechanical drive via a powerful toggle lever • Easy cutting gap adjustment on both sides • 2 cylinders mounted externally on the machine, easily accessible • Vertical, stable guides • Upper and lower blades each with 4 cutting edges • Hydraulic overload protection • Proportional force of the hold-down clamps • The machine frame is a fully welded construction and is machined in one setup (no screwed parts) • Portable electric foot switch • Blades suitable for black sheet metal and stainless steel • Ball transfer units in the table • 1 angle stop • 1 support arm • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Dujlqevkw Dve Auvaet DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2007, Used 3-meter CNC press brake from Durma Type: ADS 30175 Capacity: 3100 x 175 ton Built in 2007 (delivered in 2008) Delem 66w CNC control Delq Ausu Ixftovasut Y1, Y2, X, and R CNC controlled CNC crowning Laser Safe safety

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,568 h, Functionality: fully functional, laser power: 5,000 W, The laser machine is live and can be inspected and tested at any time. TruLaser 5060 (L10) 5000 Watts Maximum X working range: 6000 mm Maximum Y working range: 2000 mm Maximum Z working range: 115 mm Control: Siemens Sinumerik 840 D/500 MB Laser power: 5000 watts Power supply: 37,106 hours Laser beam on: 14,568 hours Maximum sheet thickness (Steel): 25 mm Maximum sheet thickness (Vacuum): 20 mm Maximum sheet thickness (Al). Max.: 12 mm Standard features: - Closed machine frame with integrated laser unit Duslq Aov Nh N Hsuvajt - Automatic pallet changer - Longitudinal conveyor belt for small parts and waste - Drives: Gantry drive combined with linear direct drives - Cutting head quick-change device - Laser cutting head with 5" lens - Laser cutting head with 7.5" lens - Programmable cutting gas selection/pressure adjustment - Capacitive height and process control (ControlLine) - AutoLas Plus (FocusLine) - Laser power control - Positioning laser diode - Hi-Las high-pressure cutting (NitroLine) - Sprintlas (FastLine) - ContourLas (ContourLine) - PMS plasma sensor system (PlasmaLine) - Lens monitoring (LensLine) - Automatic Sheet metal outer edge detection - Microweld - Automatic nozzle cleaning - Oil spray system - Work area lighting - Automatic shut-off - Safety devices (multi-beam light barriers, encapsulated beam guide) - Multi-chamber extraction - Compact dust extractor - ToPs 100 lite - RJ45 network connection - 3.5" floppy disk drive - TFT color screen - Detailed operating instructions + 5000 W laser + Load Master right + Laser cutting head with 9" lens

Condition: good (used), Year of construction: 2014, machine/vehicle number: K14027/K24145, Used Jorns folding machine with the following features: • Reinforced version with additional column unit • Deep throat with motorized depth stop system 1250 mm, with 4 stop fingers • CNC touch graphic control on the swivel arm (control system upgrade to CP200) • CE-compliant safety with laser monitoring • RH Automatic material thickness adjustment • OV Manual upper beam pre-tensioning (crowning) • Laser-hardened tools (additional surface hardening) The machine has been regularly serviced by us and is in good condition. It is a reinforced version with an additional column unit, which enables high-precision bending results even at higher power levels. Furthermore, this version meets the requirements of processing steel of S320GD and S350GD quality, which is not possible with the standard version. This year, the machine was overhauled at the JORNS factory. The following services were performed during the overhaul: • All eight column units were completely replaced, and the clamping arms were reinforced according to the current design. • The control system was upgraded to the current CP200 control system. The machine received a new control cabinet (most of the electrical components were replaced) and a new CNC touchscreen operator terminal. • The DP was upgraded: Dynamic positioning and an electro-hydraulic measuring system were retrofitted. The machine is now state-of-the-art in terms of parallel closing and individual pre-tensioning (see the explanatory video in the equipment section). • Beam renovation: The upper beam and bending beam were removed. All three tools (lower beam, lower beam, and lower beam) were welded and reground (no damage to the tools). • Hydraulics checked and serviced. • Geometry checked: air gap of lower beam, bending beam, etc. were readjusted. Dsljuqbfyeq Auvajut • The machine was cleaned. The new price of a similarly equipped machine is approximately €300,000 plus VAT. Power: 6400 x 3.0 x mm, 4.0 mm aluminum, 2.0 mm stainless steel. Backgauge: 20 - 1250 mm. Color: anthracite. Total power requirement: 400 V. Insertion depth: 1250 mm. Upper beam stroke: 200 mm. Without roller shears. Number of columns: 8. The machine will be repaired, checked, and cleaned by a specialist. A test run will be performed.

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, Technical Specifications Protection Laser CNC Bending Table CNC Axes: Y1/Y2/X/R Manual Axis: Z1/Z2 Split Toolless CYBELEC CYBTOUCH 12 Graphic CN ALMOST NEW CONDITION Features Motorized Backgauge Stroke: Duslsv Tz Uksq Auvaot 800 mm Working Height: 900 mm Main Motor Power: 11 kW Weight: 7900 kg Oil Capacity: 200 liters Folding Length: 3100 mm Power: 135 T Gooseneck: 400 mm Distance Between Columns: 2600 mm Sliding Stroke: 275 mm Approach/Working/Return Speeds: 200/10/120 mm/s Backstop Speed: 230 mm/sec Table slider clearance: 550 mm Table width: 90 mm Machine dimensions L x W x H: 4250 x 2050 x 2700 mm

Year of construction: 2012, Condition: ready for operation (used), Main Drive Number of axis 2 Additional Equipment Includes Resonator with 4400 Watt CO2 This Bystronic BySprint Pro 3015 was manufactured in 2012. A reliable CO2 laser cutting machine, it offers precision in cutting various materials. Ideal for businesses needing efficient and accurate laser cutting capabilities. Contact us for more information. Duelq Aujv Nb Dwjvaet Application Types Cutting

Condition: used, operating hours: 716 h, Functionality: fully functional, machine/vehicle number: 15/4, sheet thickness aluminum (max.): 2 mm, overall weight: 6,600 kg, year of last overhaul: 2025, Bending machine used for flat sheets Manufacturer RAS MODEL 76.60 Delqsv Tz H Ho Auvajut sheet thickness 2 mm length 6000 mm colour green

Condition: good (used), Boschert LB12 Steel up to 4mm Stainless steel up to 3mm Dslq Aujv Tzwfjvaout Blade new fully functional

Condition: new, Year of construction: 2025, Functionality: fully functional, laser power: 12,000 W, The D-Power laser cutting machine with shuttle table is the ideal solution for beginners. With a generous table size of 1500 x 3000 mm and extended options from 2000 x 4000 mm to 2500 x 6000 mm, 2500 x 8000 mm, and 2500 x 12000 mm, and a laser power of 3,000, 4,000, and 12,000 watts, this machine covers a wide range of applications. A particularly noteworthy feature is the pivoting laser head, which can be ordered separately if required to enable bevel cuts. This functionality significantly expands the machine's application possibilities, creating scope for creative solutions in metalworking and beyond. Dslq Aov Tzr Aouvaeut The price-performance ratio of the D-Power laser cutting machine will surprise you. You get high-quality technology and performance at an attractive price, making it an excellent choice for companies and craft businesses looking to enter the world of laser cutting. Take advantage of cutting-edge technologies and increase the efficiency of your production processes with this powerful and versatile machine.

Condition: good (used), Year of construction: 1999, Lg 33922 Unwind-straightener combination SOPREM BRH 7-200-80U-1250 BAP strip width max. 200 mm Coil weight max. 1,250 kg Dslq Aushuwacevajut Spreading range approx. 380 to 430 mm Coil outer diameter max. 1,300 mm Strip thickness approx. 0.8 to 3 mm Working direction from right to left

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, Manual length and angle positioner for 6000 mm pipe length Delq Auvov Tz S Aoasut The bending capacity can be found in the attached technical documentation in PDF format.

Condition: new, Year of construction: 2025, The segment folding machine SM 2020x1.2mm is a machine for bending different elements from the metal sheets with maximum length 2020 mm and maximum thickness 1.2 mm. Can be equipped with third bar segmented. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But segment folding machine SM thanks to special segmented bars gives the opportunity to bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisting of parts with different lengths. So you can adjust it to the length you want and bend boxes around this segmented part. We produce three models of segment folding machine SM: Segment folding machine SM-1270 x 2mm Segment folding machine SM-1550 x 1.8mm Segment folding machine SM -2020 x 1.2mm Those segment machines have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle 135 degrees The standard set of segment folding machine SM includes: The folding machine SM, tempered segments, angle measuring device, the four position angle limiter, two segments with side cuts, multifunctional acceptance table. As an additional option you can get cross cutting knife for the segment sheet metal bending machine. The maximum thickness of metal the knife can cut is 0.8mm steel. The segments of the folding machine are tempered and the rigidity of them is about 30 HRC. Duelq Auvev Tyr Isaot So it lets the opportunity to bend thick metal in any part of bending machine without any damage. We have started producing of segment folding machine SM since 2003 y. So we have a great experience in segment machines producing and can propose you a perfect solution for you business. Specifications Material Material width (mm) 2020 The material thickness (mm) 1.2

Condition: good (used), Year of construction: 2025, machine/vehicle number: 9010003, Offer 24195 Technical Specifications - Max. working width 2050 mm - Max. sheet thickness at 400 N/mm² without pre-bending: 4 mm - Roller diameter 115 mm - Drive 400 V / 4.5 kW Duslq Ausv Tx Hdovajt - Handheld remote control - Space required approx. W 2800 x H 1250 x D 1150 mm - Weight approx. 2200 kg

Condition: as good as new (ex-display), Year of construction: 2024, Demonstration machine. Like new. The machine is fully equipped with: - large, comfortable table - Inside fence with adjustment scale and quick adjustment for cutting strips. - 4 locking precision stops with sliding and interchangeable stop bars 500 mm long. - 2 left and 2 right T-slots parallel to the blades - Plexiglass protection for clear notching - Lift release with freely movable foot pedal - Three stroke types: set-up stroke, single stroke and continuous stroke - 1 front cross stop system consisting of T-slot and scale - 1 left and 1 right scale, parallel to the knives - 1 left and 1 right guide rail for notching magnification over 225 mm - 2 hold-down devices Two stations: Station 1 Disengage: cutting capacity: - 225 x 225 x 6mm in ST 45 - 225 x 225 x 4mm in stainless steel Station 2 punching with trump tool and/or cutting in thirty degrees max 4mm St45 max 3mm stainless steel Dujlq Auvefhw N Ieast Throat: max. 100mm

Condition: like new (used), Year of construction: 2023, Kraftformer / Eckold KF 324 incl. 3x tool sets Machine is unused / in original packaging -CE marking -Year of manufacture 2023 -3x tool sets included -Horizontal throat depth 340mm -Vertical throat depth 245mm -Working stroke 8mm -Power/drive motor 1.5kW Formable sheet thicknesses: Steel 400 N/mm2 max: 2mm Aluminum 250 N/mm2 max: 2.5mm Stainless steel 600 N/mm2 max: 1.5mm Ram adjustment via handwheel Incl. 3x tool sets: LFS 60 S-Z clamping tool TP25 S/rigid smoothing tool Dueljv Txqveq Auvaot PFW 60 S plastic former -Complete documentation -Machine ready for connection Dimensions: LxWxH 1.4x0.8x1.7 meters / Weight: 600 kg Subject to errors / typos

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Dslq Ajg U Utvouvaout Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Condition: like new (used), Year of construction: 2012, operating hours: 47 h, MACHINE WITH ONLY 47 working hours. Tested by ERMAKSAN FRANCE. COMPLETE DATA CAN BE FOUND IN DOCUMENTS FANUC CONTROL Dslq Asrcb Hqeuvajut

Condition: excellent (used), Functionality: fully functional, coil weight: 8 kg, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, total width: 1,250 mm, Slitting line for sale Delqev Twi Ro Auvaout

Condition: used, Year of construction: 2001, back gauge: 500 mm, sheet thickness steel (max.): 6 mm, cutting length (max.): 1,000 mm, Hydraulic Guillotine Shear Manufacturer: RABBA Type: HS 6/1000 Year of Manufacture: 2001 Technical Specifications Manufacturer: RABBA Type: HS 6/1000 Year of Manufacture: 2001 Usable Length: 1000 mm Sheet Thickness: 6 mm Dimensions: L 1.50 x W 1.70 x H 1.60 m Weight: 1.6 t Features • Manual backgauge 500 mm • Angle stop All information is subject to change. Duolq Ausv I T N Nevajt A demonstration is available at any time in our showroom.

Condition: good (used), Year of construction: 1995, Large working width: 2040 mm For sheets up to: 1.5 mm For aluminum sheets up to: 2 mm Upper beam stroke: 80 mm Duolqev I Tdas Auvaot Bending beam adjustability: 25 mm Weight: 860 kg Space required: 2650 x 610 x 1160 mm

Condition: good (used), Year of construction: 2006, machine/vehicle number: 102-123, With CNC touchscreen graphic control, hydraulic material thickness adjustment, manual upper beam pre-tensioning, motor-driven depth stop + conical stop, motor-driven roller shear. The machine will be repaired, tested, and cleaned by a specialist and will then be fully functional. A test run will be performed. Sheet width: 4010 mm Duolq Auov I Ta Uevaot Steel sheet thickness: 2.0 mm Aluminum sheet thickness: 3.0 mm Stainless steel sheet thickness: 1.5 mm Backgauge: 30-1000 mm Thrust: 1165 mm Color: gray/blue Total power requirement: 5.5 kW Space requirement: 5500 x 2080 x 2100 mm Insert depth: 1165 mm Machine weight: 3800 kg Motor power: 5.5 kW Upper beam stroke: 180 mm with roller shears Number of columns: 4 Opening width: 180 mm Bending angle: 145 degrees

Condition: good (used), Year of construction: 2006, coil weight: 500 kg, Millutensil SLMD 500. Double decoiler / double rewinder. Dujlq Aju A T Hzouvajt Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy. More coilers, and presses on stock, Bruderer, Schaal, Mabu, Bihler, Schuler, Amada, San Gimignano, Kaiser, EBU...

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, Sheet width 3100 mm Sheet thickness 6 mm Back gauge 1000 mm throat 350 mm Cutting angle 0.5 - 1.5 ° Hold-down device 14 pcs Stroke rate 16 - 24 strokes/min Total power requirement 11 kW Space requirement approx. 4100 x 2200 x 2190 mm Machine weight approx. 8500 kg electric / hydraulic CNC guillotine shear - guided * with CYBELEC CNC touch screen control * with electric / hydraulic cutting gap & cutting angle adjustment Equipment: Dusloumltysq Auvaot - CNC guiding guillotine shears - with electric / hydraulic cutting gap & cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, incl. sheet thickness * Cutting line lighting - Motorized backgauge, travel = 1,000 mm ( X axis ) * on recirculating ball screws * can be folded up automatically at max. travel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - Hinged finger guard, with safety switch - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine ( safety device ) - Foot switch - CE mark/declaration of conformity including special equipment : - pneumatic sheet holding device